arXiv subjects

Miaoqi Chu

Publications and source records attributed to Miaoqi Chu.

6 recordsLinked to original sources

arXiv2026

Spatially heterogeneous relaxational dynamics and the evolution of recoverable strain following flow cessation of a ductile nanocolloidal glass

We report a combined rheology and x-ray photon correlation spectroscopy (XPCS) study of the structural and mechanical relaxation of a ductile, nanocolloidal glass following the cessation of shear flow. After the glass is sheared to 300% strain at various shear rates and then held at fixed strain, the stress undergoes a protracted, quasi-logarithmic decay with hold time that depends weakly on the initial strain rate. Recovery rheology measurements reveal that this stress relaxation is accompanied by a logarithmic decrease in the elastic component of the recoverable strain; hence, the rates of decrease of the stress and recoverable strain are proportional. XPCS measurements during the stress relaxation reveal dynamics dominated by a convection-like backflow that is divided into two dynamically distinct regions indicative of banded motion. In one region, the flow can be modeled by an affine strain, while in the other region the glass moves as a plug while undergoing slow, glassy relaxation. The rates of these dynamics approximately track the rate of loss of recoverable strain, indicating this motion is the predominant microscopic mechanism driving the conversion of recoverable to unrecoverable strain during stress relaxation. In contrast, XPCS measurements during strain recovery reveal purely affine flow with no evidence of heterogeneity and with strain rates that agree quantitatively with the rheometry measurements. Together, these results provide a unified microscopic picture connecting the evolving internal dynamics of a ductile glass to its macroscopic mechanical relaxation following flow cessation.

cond-mat.soft↗

arXiv2026

Nonuniform Iterative Phasing Framework and Sampling Requirements for 3D Dynamical Inversion from Coherent Surface Scattering Imaging

Coherent surface scattering imaging (CSSI) is an emerging experimental technique uniquely suited to probing the structure of thin nanostructures. In these experiments, a specimen is placed on a substrate, and a series of X-ray diffraction patterns is collected at grazing incidence angles as the specimen is rotated. However, reconstructing the specimen's 3D structure from the data is challenging due to dynamical scattering effects induced by the experimental geometry and the lack of direct phase measurements. Specifically, the data involves nonuniformly sampled Fourier-transform values of the specimen density, and failure to effectively address this nonuniformity can lead to errors or degraded performance. Here we introduce a mathematical inversion framework that combines iterative-projection-based phasing techniques with new fast nonuniform Fourier inversion methods to efficiently reconstruct isolated 3D structures from their CSSI rotation-series data. We also analyze the theoretical properties of CSSI reconstruction to derive requirements on experimental parameters and characterize solution uniqueness. We validate our approach using CSSI data simulated from a conical Siemens star and a porous medium, demonstrating that high-resolution 3D structures can be reconstructed even in the presence of significant dynamical scattering, from data collected at as few as one or two incident angles. More broadly, the presented nonuniform reconstruction framework provides a foundation for solving challenging generalizations of the phase problem in which measurements involve nonlinear combinations of nonuniformly sampled Fourier values.

physics.comp-ph↗

arXiv2024

Three-dimensional Hard X-ray Ptychographic Reflectometry Imaging on Extended Mesoscopic Surface Structures

Many nano and quantum devices, with their sizes often spanning from millimeters down to sub-nanometer, have intricate low-dimensional, non-uniform, or hierarchical structures on surfaces and interfaces. Since their functionalities are dependent on these structures, high-resolution surface-sensitive characterization becomes imperative to gain a comprehensive understanding of the function-structure relationship. We thus developed hard X-ray ptychographic reflectometry imaging, a new technique that merges the high-resolution two-dimensional imaging capabilities of hard X-ray ptychography for extended objects, with the high-resolution depth profiling capabilities of X-ray reflectivity for layered structures. The synergy of these two methods fully leverages both amplitude and phase information from ptychography reconstruction to not only reveal surface topography and localized structures such as shapes and electron densities, but also yields statistical details such as interfacial roughness that is not readily accessible through coherent imaging solely. The hard X-ray ptychographic reflectometry imaging is well-suited for three-dimensional imaging of mesoscopic samples, particularly those comprising planar or layered nanostructures on opaque supports, and could also offer a high-resolution surface metrology and defect analysis on semiconductor devices such as integrated nanocircuits and lithographic photomasks for microchip fabrications.

physics.optics↗

arXiv2022

Elucidation of Relaxation Dynamics Beyond Equilibrium Through AI-informed X-ray Photon Correlation Spectroscopy

Understanding and interpreting dynamics of functional materials \textit{in situ} is a grand challenge in physics and materials science due to the difficulty of experimentally probing materials at varied length and time scales. X-ray photon correlation spectroscopy (XPCS) is uniquely well-suited for characterizing materials dynamics over wide-ranging time scales, however spatial and temporal heterogeneity in material behavior can make interpretation of experimental XPCS data difficult. In this work we have developed an unsupervised deep learning (DL) framework for automated classification and interpretation of relaxation dynamics from experimental data without requiring any prior physical knowledge of the system behavior. We demonstrate how this method can be used to rapidly explore large datasets to identify samples of interest, and we apply this approach to directly correlate bulk properties of a model system to microscopic dynamics. Importantly, this DL framework is material and process agnostic, marking a concrete step towards autonomous materials discovery.

cond-mat.mtrl-sci↗

arXiv2022

Multislice forward modeling of Coherent Surface Scattering Imaging on surface and interfacial structures

To study nanostructures on substrates, surface-sensitive reflection-geometry scattering techniques such as grazing incident small angle x-ray scattering are commonly used to yield an averaged statistical structural information of the surface sample. Grazing incidence geometry can probe the absolute three-dimensional structural morphology of the sample if a highly coherent beam is used. Coherent Surface Scattering Imaging (CSSI) is a powerful yet non-invasive technique similar to Coherent X-ray Diffractive Imaging (CDI) but performed at small angles and grazing-incidence reflection geometry. A challenge with CSSI is that conventional CDI reconstruction techniques cannot be directly applied to CSSI because the Fourier-transform-based forward models cannot reproduce the dynamical scattering phenomenon near the critical angle of total external reflection of the substrate-supported samples. To overcome this challenge, we have developed a multislice forward model which can successfully simulate the dynamical or multi-beam scattering generated from surface structures and the underlying substrate. The forward model is also demonstrated to be able to reconstruct an elongated 3D pattern from a single shot scattering image in the CSSI geometry through fast-performing CUDA-assisted PyTorch optimization with automatic differentiation.

physics.comp-ph↗

arXiv2019

Dynamic and programmable cellular-scale granules enable tissue-like materials

Tissue-like materials are required in many robotic systems to improve human-machine interactions. However, the mechanical properties of living tissues are difficult to replicate. Synthetic materials are not usually capable of simultaneously displaying the behaviors of the cellular ensemble and the extracellular matrix. A particular challenge is identification of a cell-like synthetic component which is tightly integrated with its matrix and also responsive to external stimuli at the population level. Here, we demonstrate that cellular-scale hydrated starch granules, an underexplored component in materials science, can turn conventional hydrogels into tissue-like materials when composites are formed. Using several synchrotron-based X-ray techniques, we reveal the mechanically-induced motion and training dynamics of the starch granules in the hydrogel matrix. These dynamic behaviors enable multiple tissue-like properties such as strain-stiffening, anisotropy, mechanical heterogeneity, programmability, mechanochemistry, impact absorption, and self-healability. The starch-hydrogel composites can be processed as robotic skins that maintain these tissue-like characteristics.

cond-mat.soft↗