arXiv subjects

Michael A. Scarpulla

Publications and source records attributed to Michael A. Scarpulla.

28 records · Page 2Linked to original sources

arXiv2020

Oxygen annealing induced changes in defects within beta-Ga2O3 epitaxial films measured using photoluminescence

In this work, we use photoluminescence spectroscopy (PL) to monitor changes in the UV, UV', blue, and green emission bands from n-type (010) Ga2O3 films grown by metalorganic vapor phase epitaxy (MOVPE) induced by annealing at different temperatures under O2 ambient. Annealing at successively higher temperatures decreases the overall PL yield and UV intensity at nearly the same rates, indicating the increase in formation of at least one non-radiative defect type. Simultaneously, the PL yield ratios of blue/UV and green/UV increase, suggesting that defects associated with these emissions increase in concentration with O2 annealing. Utilizing the different absorption coefficients of 240 and 266 nm polarization-dependent excitation, we find an overall activation energy for the generation of non-radiative defects of 0.69 eV in the bulk but 1.55 eV near the surface. We also deduce activation energies for the green emission-related defects of 0.60 eV near the surface and 0.89-0.92 eV through the films, whereas the blue-related defects have activation energy in the range 0.43-0.62 eV for all depths. Lastly, we observe hillock surface morphologies and Cr diffusion from the substrate into the film for temperatures above 1050 oC. These observations are consistent with the formation and diffusion of VGa and its complexes as a dominant process during O2 annealing, but further work will be necessary to determine which defects and complexes provide radiative and non-radiative recombination channels and the detailed kinetic processes occurring at surfaces and in bulk amongst defect populations.

cond-mat.mtrl-sci↗

arXiv2020

On the origin of red luminescence from iron-doped beta-Ga2O3 bulk crystals

Currently, Fe doping in the ~10^18 cm-3 range is the most widely-available method for producing semi-insulating single crystalline beta-Ga2O3 substrates. Red luminescence features have been reported from multiple types of Ga2O3 samples including Fe-doped -Ga2O3, and attributed to Fe or N at O. Herein, however, we demonstrate that the high-intensity red luminescence from Fe-doped beta-Ga2O3 commercial substrates consisting of two sharp peaks at 689 nm and 697 nm superimposed on a broader peak centered at 710 nm originates from Cr impurities present at a concentration near 2 ppm. The red emission exhibits two-fold symmetry, peaks in intensity for excitation near absorption edge, seems to compete with Ga2O3 emission at higher excitation energy and appears to be intensified in the presence of Fe. Based on polarized absorption, luminescence observations and Tanabe-Sugano diagram analysis, we propose a resonant energy transfer of photogenerated carriers in beta-Ga2O3 matrix to octahedrally-coordinated Cr3+ to give red luminescence, possibly also sensitized by Fe3+.

cond-mat.mtrl-sci↗

arXiv2020

Delta-doped \b{eta}-Ga2O3 thin films and \b{eta}-(Al0.26Ga0.74)2O3/\b{eta}-Ga2O3 heterostructures grown by metalorganic vapor-phase epitaxy

We report on silicon delta doping of metalorganic vapor-phase epitaxy-grown \b{eta}-Ga2O3 thin films using silane precursor. Delta-doped \b{eta}-Ga2O3 epitaxial films are characterized using capacitance-voltage profiling and secondary-ion mass spectroscopy. Electron sheet charge density in the range of 2.9e12 cm-2 to 8e12 cm-2 with a half width at half maximum ranging from 6.2 nm to 3.5 nm is measured. We also demonstrate a high density (6.4e12 cm-2) degenerate two-dimensional electron gas using a delta-doped \b{eta}-(Al0.26Ga0.74)2O3/\b{eta}-Ga2O3 heterostructure.The total charge could also include a contribution from a parallel channel in the \b{eta}-(Al0.26Ga0.74)2O3 alloy barrier.

cond-mat.mtrl-sci↗

arXiv2020

Schottky Barrier Height Engineering In $β$-Ga$_2$O$_3$ Using SiO$_2$ Interlayer Dielectric

This paper reports on the modulation of Schottky barrier heights (SBH) on three different orientations of $β$-Ga$_2$O$_3$ by insertion of an ultra-thin SiO$_2$ dielectric interlayer at the metal-semiconductor junction, which can potentially lower the Fermi-level pinning (FLP) effect due to metal-induced gap states (MIGS). Pt and Ni metal-semiconductor (MS) and metal-interlayer-semiconductor (MIS) Schottky barrier diodes were fabricated on bulk n-type doped $β$-Ga$_2$O$_3$ single crystal substrates along the (010), (-201) and (100) orientations and were characterized by room temperature current-voltage (I-V) and capacitance-voltage (C-V) measurements. Pt MIS diodes exhibited 0.53 eV and 0.37 eV increment in SBH along the (010) and (-201) orientations respectively as compared to their respective MS counterparts. The highest SBH of 1.81 eV was achieved on the (010)-oriented MIS SBD using Pt metal. The MIS SBDs on (100)-oriented substrates exhibited a dramatic increment ($>$1.5$\times$) in SBH as well as reduction in reverse leakage current. The use of thin dielectric interlayers can be an efficient experimental method to modulate SBH of metal/Ga$_2$O$_3$ junctions.

physics.app-ph↗

arXiv2018

Manifestation of kinetic-inductance in spectrally-narrow terahertz plasmon resonances in thin-film Cd3As2

Three-dimensional (3D) semimetals have been predicted and demonstrated to have a wide variety of interesting properties associated with its linear energy dispersion. In analogy to two-dimensional (2D) Dirac semimetals, such as graphene, Cd3As2, a 3D semimetal, has shown ultra-high mobility, large Fermi velocity, and has been hypothesized to support plasmons at terahertz frequencies. In this work, we demonstrate synthesis of high-quality large-area Cd3As2 thin-films through thermal evaporation as well as the experimental realization of plasmonic structures consisting of periodic arrays of Cd3As2 stripes. These arrays exhibit sharp resonances at terahertz frequencies with associated quality-factors (Q) as high as ~ 3.7. Such spectrally-narrow resonances can be understood on the basis of a large kinetic-inductance, resulting from a long momentum scattering time, which in our films can approach ~1 ps at room-temperature. Moreover, we demonstrate an ultrafast tunable response through excitation of photo-induced carriers in optical pump / terahertz probe experiments. Our results evidence that the intrinsic 3D nature of Cd3As2 provides for a very robust platform for terahertz plasmonic applications. Overall, our observations pave a way for the development of myriad terahertz (opto) electronic devices based on Cd3As2 and other 3D Dirac semimetals, benefiting from strong coupling of terahertz radiation, ultrafast transient response, magneto-plasmon properties, etc. Moreover, the long momentum scattering time, thus large kinetic inductance in Cd3As2, also holds enormous potential for the re-design of passive elements such as inductors and hence can have a profound impact in the field of RF integrated circuits.

physics.optics↗

arXiv2018

Enhancement in surface mobility and quantum transport of Bi_(2-x)Sb_(x)Te_(3-y)Se_(y) topological insulator by controlling the crystal growth conditions

Despite numerous studies on three-dimensional topological insulators (3D TIs), the controlled growth of high quality (bulk-insulating and high mobility) TIs remains a challenging subject. This study investigates the role of growth methods on the synthesis of single crystal stoichiometric BiSbTeSe2 (BSTS). Three types of BSTS samples are prepared using three different methods, namely melting growth (MG), Bridgman growth (BG) and two-step melting-Bridgman growth (MBG). Our results show that the crystal quality of the BSTS depend strongly on the growth method. Crystal structure and composition analyses suggest a better homogeneity and highly-ordered crystal structure in BSTS grown by MBG method. This correlates well to sample electrical transport properties, where a substantial improvement in surface mobility is observed in MBG BSTS devices. The enhancement in crystal quality and mobility allow the observation of well-developed quantum Hall effect at low magnetic field.

cond-mat.mtrl-sci↗

arXiv2017

Photoassisted physical vapor epitaxial growth of semiconductors: a review of light-induced modifications to growth processes

Herein we review the remarkable range of modifications to materials properties associated with photoexcitation of the growth surface during physical vapor epitaxy of semiconductors. We concentrate on mechanisms producing measureable, utilizable changes in crystalline perfection, phase, composition, doping, and defect distribution. We outline the relevant physics of different mechanisms, concentrating on those yielding effects orthogonal to the primary growth variables of temperature and atomic or molecular fluxes and document the phenomenological effects reported. Based on experimental observations from a range of semiconductor systems and growth conditions, the primary effects include enhanced anion desorption, molecular dissociation, increased doping efficiency, modification to defect populations and improvements to the crystalline quality of epilayers grown at low temperatures. Future research directions and technological applications are also discussed.

cond-mat.mtrl-sci↗

arXiv2017

Effects of excess carriers on native defects in wide bandgap semiconductors: illumination as a method to enhance p-type doping

Undesired unintentional doping and doping limits in semiconductors are typically caused by compensating defects with low formation energies. Since the formation energy of a charged defect depends linearly on the Fermi level, doping limits can be especially pronounced in wide bandgap semiconductors where the Fermi level can vary substantially. Introduction of non-equilibrium carrier concentrations during growth or processing alters the chemical potentials of band carriers and thus provides the possibility of modifying populations of charged defects in ways impossible at thermal equilibrium. Herein we demonstrate that, for an ergodic system with excess carriers, the rates of carrier capture and emission involving a defect charge transition level rigorously determine the admixture of electron and hole quasi-Fermi levels determining the formation energy of non-zero charge states of that defect type. To catalog the range of possible responses to excess carriers, we investigate the behavior of a single donor-like defect as functions of extrinsic doping and energy of the charge transition level. The technologically most important finding is that excess carriers will increase the formation energy of compensating defects for most values of the charge transition level in the bandgap. Thus, it may be possible to overcome limitations on doping imposed by native defects. Cases also exist in wide bandgap semiconductors in which the concentration of defects with the same charge polarity as the majority dopant is either left unchanged or actually increases. The causes of these various behaviors are rationalized in terms of the capture and emission rates and guidelines for carrying out experimental tests of this model are given.

cond-mat.mtrl-sci↗

arXiv2016

Suppression of compensating native defect formation during semiconductor processing via excess carriers

In many semiconductors, compensating defects set doping limits, decrease carrier mobility, and reduce minority carrier lifetime thus limiting their utility in devices. Native defects are responsible in many cases, but extrinsic dopants may also act as their own compensation when occupying an alternate lattice site. Suppressing the concentrations of compensating defects during processing close to thermal equilibrium is difficult because formation enthalpies are lowered as the Fermi level moves towards the majority band edge. Excess carriers, introduced for example by photogeneration, modify the formation enthalpy of semiconductor defects and thus can be harnessed during crystal growth or annealing to suppress such defect populations. Herein we develop a rigorous and general model for defect formation in the presence of steady-state excess carrier concentrations by combining the standard quasi-chemical formalism with a detailed-balance description that is applicable for any defect state in the bandgap. Considering the quasi-Fermi levels as chemical potentials, we demonstrate that increasing the minority carrier concentration increases the formation enthalpy for typical compensating centers, thus suppressing their formation. This effect is illustrated for the specific example of native GaSb antisite acceptors in nominally un-doped and extrinsically n-type doped GaSb. The model also predicts reductions in the concentration of ionized scattering centers as well as increased mobility. While our treatment is generalized for excess carrier injection or generation in semiconductors by any means, we provide a set of guidelines for applying the concept in photoassisted physical vapor deposition.

cond-mat.mtrl-sci↗

arXiv2009

Bandgap and Band Offsets Determination of Semiconductor Heterostructures using Three-terminal Ballistic Carrier Spectroscopy

Utilizing three-terminal tunnel emission of ballistic electrons and holes, we have developed a method to self-consistently measure the bandgap of semiconductors and band discontinuities at semiconductor heterojunctions without any prerequisite material parameter. Measurements are performed on lattice-matched GaAs/AlxGa1-xAs and GaAs/(AlxGa1-x)0.51In0.49P single-barrier heterostructures. The bandgaps of AlGaAs and AlGaInP are measured with a resolution of several meV at 4.2 K. For the GaAs/AlGaAs interface, the measured Gamma band offset ratio is 60.4:39.6 (+/-2%). For the GaAs/AlGaInP interface, this ratio varies with the Al mole fraction and is distributed more in the valence band. A non-monotonic Al composition dependence of the conduction band offset at the GaAs/AlGaInP interface is observed in the indirect-gap regime.

cond-mat.mes-hall↗