SearcharxivSearch

arXiv subjects

Michael Andrews

Publications and source records attributed to Michael Andrews.

13 recordsLinked to original sources

Secular Resonances in Planet-Hosting Binary Stars. II. Application to Terrestrial Planet Formation

Continuing our study of the effects of secular resonances on the formation of terrestrial planets in moderately close binary stars, we present here the results of an extensive numerical simulations of the formation of these objects. Considering a binary with two giant planets and a protoplanetary disk around its primary star, we have simulated the late stage of terrestrial planet formation for different types of the secondary, and different orbital elements of the binary and giant planets. Results demonstrate that terrestrial planet formation can indeed proceed constructively in such systems; however, as predicted by the general theory, secular resonances are suppressed and do not contribute to the formation process. Simulations show that it is in fact the mean-motion resonances of the inner giant planet that drive the dynamics of the protoplanetary disk and the mass and orbital architecture of the final bodies. Simulations also show that in the majority of the cases, the final systems contain only one terrestrial planet with a mass of 0.6-1.7 Earth masses. Multiple planets appear on rare occasions in the form of Earth-Mars analogs with the smaller planet in an exterior orbit. When giant planets are in larger orbits, the number of these double-planet systems increases and their planets become more massive. Results also show that when the orbits of the giant planets carry inclinations, while secular resonances are still suppressed, mean-motion resonances are strongly enhanced, drastically reducing the efficacy of the formation process. We present the results of our simulations and discuss their implications.

astro-ph.EP

Role of Wettability, Adhesion, and Instabilities in Transitions During Lubricated Sliding Friction

Lubricated contacts in soft materials are important in various engineering systems and natural settings. Three major lubrication regimes are boundary (BL), mixed (ML), and elasto-hydrodynamic (EHL) lubrication, where the contact region is dry, partially wetted, or fully wetted, respectively. The transition between these regimes is insufficiently understood, especially for soft contacts, which impedes desired control of lubricated sliding friction. Here, we report on the role of solid wettability and adhesion on these transitions. Wettability of glycerol on polydimethylsiloxane (PDMS) surface, and adhesion between a glass indenter and PDMS, were varied by exposure of the PDMS to an ultraviolet light-ozone (UV-Ozone) cleaner. By combining friction tests and visualization, we demonstrate that the transition from ML to BL regime is dominated by the wettability of the lubricant; increasing wettability of glycerol makes removal of liquid from the contact region more difficult. Transition from EHL to ML is related to a series of events with increasing normal load, which are thinning of the lubricant layer, sudden jump to contact between the glass indenter and solid substrate across a gap of tens to a few hundreds of nanometers, and attendant elastic instabilities such as wrinkling and stick-slip. These results provide a deeper understanding of transitions in lubricated frictional behavior of soft materials which govern the maximum and minimum friction achievable.

cond-mat.soft

Autoencoder-based Online Data Quality Monitoring for the CMS Electromagnetic Calorimeter

The online Data Quality Monitoring system (DQM) of the CMS electromagnetic calorimeter (ECAL) is a crucial operational tool that allows ECAL experts to quickly identify, localize, and diagnose a broad range of detector issues that would otherwise hinder physics-quality data taking. Although the existing ECAL DQM system has been continuously updated to respond to new problems, it remains one step behind newer and unforeseen issues. Using unsupervised deep learning, a real-time autoencoder-based anomaly detection system is developed that is able to detect ECAL anomalies unseen in past data. After accounting for spatial variations in the response of the ECAL and the temporal evolution of anomalies, the new system is able to efficiently detect anomalies while maintaining an estimated false discovery rate between $10^{-2}$ to $10^{-4}$, beating existing benchmarks by about two orders of magnitude. The real-world performance of the system is validated using anomalies found in 2018 and 2022 LHC collision data. Additionally, first results from deploying the autoencoder-based system in the CMS online DQM workflow for the ECAL barrel during Run 3 of the LHC are presented, showing its promising performance in detecting obscure issues that could have been missed in the existing DQM system.

physics.ins-det

Searching for Intelligent Life in Gravitational Wave Signals Part I: Present Capabilities and Future Horizons

We show that the Laser Interferometer Gravitational Wave Observatory (LIGO) is a powerful instrument in the Search for Extraterrestrial Intelligence (SETI). LIGO's ability to detect gravitational waves (GWs) from astrophysical sources, such as binary black hole mergers, also provides the potential to detect extraterrestrial mega-technology, such as Rapid and/or Massive Accelerating spacecraft (RAMAcraft). We show that LIGO is sensitive to RAMAcraft of 1 Jupiter mass accelerating to a fraction of the speed of light (e.g. 30\%) from $10 - 100\,$kpc or a Moon mass from $1-10\,$pc. While existing SETI searches can probe on the order of ten-thousand stars for human-scale technology (e.g. radio waves), LIGO can probe all 10$^{11}$ stars in the Milky Way for RAMAcraft. Moreover, thanks to the $f^{-1}$ scaling of RAMAcraft signals, our sensitivity to these objects will increase as low-frequency detectors are developed and improved, allowing for the detection of smaller masses further from Earth. In particular, we find that DECIGO and the Big Bang Observer (BBO) will be about 100 times more sensitive than LIGO, increasing the search volume by 10$^{6}$, while LISA and Pulsar Timing Arrays (PTAs) may improve sensitivities to objects with long acceleration periods. In this paper, we calculate the waveforms for linearly-accelerating RAMAcraft in a form suitable for LIGO, Virgo, and KAGRA searches and provide the range for a variety of masses and accelerations. We expect that the current and upcoming GW detectors will soon become an excellent complement to the existing SETI efforts.

astro-ph.IM

DeepSNR: A deep learning foundation for offline gravitational wave detection

All scientific claims of gravitational wave discovery to date rely on the offline statistical analysis of candidate observations in order to quantify significance relative to background processes. The current foundation in such offline detection pipelines in experiments at LIGO is the matched-filter algorithm, which produces a signal-to-noise-ratio-based statistic for ranking candidate observations. Existing deep-learning-based attempts to detect gravitational waves, which have shown promise in both signal sensitivity and computational efficiency, output probability scores. However, probability scores are not easily integrated into discovery workflows, limiting the use of deep learning thus far to non-discovery-oriented applications. In this paper, the Deep Learning Signal-to-Noise Ratio (DeepSNR) detection pipeline, which uses a novel method for generating a signal-to-noise ratio ranking statistic from deep learning classifiers, is introduced, providing the first foundation for the use of deep learning algorithms in discovery-oriented pipelines. The performance of DeepSNR is demonstrated by identifying binary black hole merger candidates versus noise sources in open LIGO data from the first observation run. High-fidelity simulations of the LIGO detector responses are used to present the first sensitivity estimates of deep learning models in terms of physical observables. The robustness of DeepSNR under various experimental considerations is also investigated. The results pave the way for DeepSNR to be used in the scientific discovery of gravitational waves and rare signals in broader contexts, potentially enabling the detection of fainter signals and never-before-observed phenomena.

gr-qc

End-to-End Jet Classification of Boosted Top Quarks with the CMS Open Data

We describe a novel application of the end-to-end deep learning technique to the task of discriminating top quark-initiated jets from those originating from the hadronization of a light quark or a gluon. The end-to-end deep learning technique combines deep learning algorithms and low-level detector representation of the high-energy collision event. In this study, we use low-level detector information from the simulated CMS Open Data samples to construct the top jet classifiers. To optimize classifier performance we progressively add low-level information from the CMS tracking detector, including pixel detector reconstructed hits and impact parameters, and demonstrate the value of additional tracking information even when no new spatial structures are added. Relying only on calorimeter energy deposits and reconstructed pixel detector hits, the end-to-end classifier achieves an AUC score of 0.975$\pm$0.002 for the task of classifying boosted top quark jets. After adding derived track quantities, the classifier AUC score increases to 0.9824$\pm$0.0013, serving as the first performance benchmark for these CMS Open Data samples. We additionally provide a timing performance comparison of different processor unit architectures for training the network.

physics.data-an

Extracting low energy signals from raw LArTPC waveforms using deep learning techniques -- A proof of concept

We investigate the feasibility of using deep learning techniques, in the form of a one-dimensional convolutional neural network (1D-CNN), for the extraction of signals from the raw waveforms produced by the individual channels of liquid argon time projection chamber (LArTPC) detectors. A minimal generic LArTPC detector model is developed to generate realistic noise and signal waveforms used to train and test the 1D-CNN, and evaluate its performance on low-level signals. We demonstrate that our approach overcomes the inherent shortcomings of traditional cut-based methods by extending sensitivity to signals with ADC values below their imposed thresholds. This approach exhibits great promise in enhancing the capabilities of future generation neutrino experiments like DUNE to carry out their low-energy neutrino physics programs.

physics.ins-det

End-to-End Physics Event Classification with CMS Open Data: Applying Image-Based Deep Learning to Detector Data for the Direct Classification of Collision Events at the LHC

This paper describes the construction of novel end-to-end image-based classifiers that directly leverage low-level simulated detector data to discriminate signal and background processes in pp collision events at the Large Hadron Collider at CERN. To better understand what end-to-end classifiers are capable of learning from the data and to address a number of associated challenges, we distinguish the decay of the standard model Higgs boson into two photons from its leading background sources using high-fidelity simulated CMS Open Data. We demonstrate the ability of end-to-end classifiers to learn from the angular distribution of the photons recorded as electromagnetic showers, their intrinsic shapes, and the energy of their constituent hits, even when the underlying particles are not fully resolved, delivering a clear advantage in such cases over purely kinematics-based classifiers.

physics.data-an

End-to-End Jet Classification of Quarks and Gluons with the CMS Open Data

We describe the construction of end-to-end jet image classifiers based on simulated low-level detector data to discriminate quark- vs. gluon-initiated jets with high-fidelity simulated CMS Open Data. We highlight the importance of precise spatial information and demonstrate competitive performance to existing state-of-the-art jet classifiers. We further generalize the end-to-end approach to event-level classification of quark vs. gluon di-jet QCD events. We compare the fully end-to-end approach to using hand-engineered features and demonstrate that the end-to-end algorithm is robust against the effects of underlying event and pile-up.

hep-ex

Cosmicflows-4: The Catalog of ~10000 Tully-Fisher Distances

We present the distances of 9792 spiral galaxies lying within 15,000 km/s using the relation between luminosity and rotation rate of spiral galaxies. The sample is dominantly, but not exclusively, drawn from galaxies detected in the course of the ALFALFA HI survey with the Arecibo Telescope. Relations between \hi line widths and luminosity are calibrated at SDSS u, g, r, i, z bands and WISE W1 and W2 bands. By exploiting secondary parameters, particularly color indices, we address discrepancies between measured distances at different wave bands with unprecedented detail. We provide a catalog that includes reduced kinematic, photometric, and inclination parameters. We also describe a machine learning algorithm, based on the random forest technique that predicts the dust attenuation in spirals lacking infrared photometry. We determine a Hubble Constant value of H0 = 75.1+-0.2 (stat.), with potential systematics up to +-3 km/s/Mpc.

astro-ph.GA

End-to-end particle and event identification at the Large Hadron Collider with CMS Open Data

From particle identification to the discovery of the Higgs boson, deep learning algorithms have become an increasingly important tool for data analysis at the Large Hadron Collider (LHC). We present an innovative end-to-end deep learning approach for jet identification at the Compact Muon Solenoid (CMS) experiment at the LHC. The method combines deep neural networks with low-level detector information, such as calorimeter energy deposits and tracking information, to build a discriminator to identify different particle species. Using two physics examples as references: electron vs. photon discrimination and quark vs. gluon discrimination, we demonstrate the performance of the end-to-end approach on simulated events with full detector geometry as available in the CMS Open Data. We also offer insights into the importance of the information extracted from various sub-detectors and describe how end-to-end techniques can be extended to event-level classification using information from the whole CMS detector.

hep-ex

Machine Learning in High Energy Physics Community White Paper

Machine learning has been applied to several problems in particle physics research, beginning with applications to high-level physics analysis in the 1990s and 2000s, followed by an explosion of applications in particle and event identification and reconstruction in the 2010s. In this document we discuss promising future research and development areas for machine learning in particle physics. We detail a roadmap for their implementation, software and hardware resource requirements, collaborative initiatives with the data science community, academia and industry, and training the particle physics community in data science. The main objective of the document is to connect and motivate these areas of research and development with the physics drivers of the High-Luminosity Large Hadron Collider and future neutrino experiments and identify the resource needs for their implementation. Additionally we identify areas where collaboration with external communities will be of great benefit.

physics.comp-ph

Inverting the Hopf map

We calculate the $η$-localization of the motivic stable homotopy ring over the complex numbers, confirming a conjecture of Guillou and Isaksen. Our approach is via the motivic Adams-Novikov spectral sequence. In fact, work of Hu, Kriz, and Ormsby implies that it suffices to compute the corresponding localization of the classical Adams-Novikov $E_2$-term, and this is what we do. Guillou and Isaksen also proposed a pattern of differentials in the localized motivic classical Adams spectral sequence, which we verify using a method first explored by Novikov.

math.AT