Michael Audley | Searcharxiv

arXiv2004

Modeling the electromagnetic properties of the SCUBA-2 detectors

SCUBA-2 is the next-generation replacement for SCUBA (Sub-millimetre Common User Bolometer Array) on the James Clerk Maxwell Telescope. Operating at 450 and 850 microns, SCUBA-2 fills the focal plane of the telescope with fully-sampled, monolithic bolometer arrays. Each SCUBA-2 pixel uses a quarter-wave slab of silicon with an implanted resistive layer and backshort as an absorber and a superconducting transition edge sensor as a thermometer. In order to verify and optimize the pixel design, we have investigated the electromagnetic behaviour of the detectors, using both a simple transmission-line model and Ansoft HFSS, a finite-element electromagnetic simulator. We used the transmission line model to fit transmission measurements of doped wafers and determined the correct implant dose for the absorbing layer. The more detailed HFSS modelling yielded some unexpected results which led us to modify the pixel design. We also verified that the detectors suffered little loss of sensitivity for off-axis angles up to about 30 degrees.

physics.ins-det↗

arXiv2004

An update on the SCUBA-2 project

SCUBA-2, which replaces SCUBA (the Submillimeter Common User Bolometer Array) on the James Clerk Maxwell Telescope (JCMT) in 2006, is a large-format bolometer array for submillimeter astronomy. Unlike previous detectors which have used discrete bolometers, SCUBA-2 has two dc-coupled, monolithic, filled arrays with a total of ~10,000 bolometers. It will offer simultaneous imaging of a 50 sq-arcmin field of view at wavelengths of 850 and 450 microns. SCUBA-2 is expected to have a huge impact on the study of galaxy formation and evolution in the early Universe as well as star and planet formation in our own Galaxy. Mapping the sky to the same S/N up to 1000 times faster than SCUBA, it will also act as a pathfinder for the new submillimeter interferometers such as ALMA. SCUBA-2's absorber-coupled pixels use superconducting transition edge sensors operating at 120 mK for performance limited by the sky background photon noise. The monolithic silicon detector arrays are deep-etched by the Bosch process to isolate the pixels on silicon nitride membranes. Electrical connections are made through indium bump bonds to a SQUID time-domain multiplexer (MUX). We give an overview of the SCUBA-2 system and an update on its status, and describe some of the technological innovations that make this unique instrument possible.

astro-ph↗