SearcharxivSearch

arXiv subjects

Michael Baldea

Publications and source records attributed to Michael Baldea.

12 recordsLinked to original sources

Exploiting Separability in Multi-Scale Grey-Box Bayesian Optimization

We consider grey-box optimization problems where the decision variables naturally partition into black-box variables (as arguments to an expensive black-box function) and white-box variables, governed by a set of explicit, closed-form equations that also depend on the output of the black-box function. We exploit this separability through a bilevel reformulation: an outer Bayesian optimization (BO) to optimize the scalar objective as a function of black-box variables alone, while an inner problem solves the white-box subproblem via global optimization. The Gaussian process surrogate used in BO is therefore defined rather than and white-box constraints are satisfied exactly whenever the inner optimizer converges to a feasible point---without penalty functions, chance constraints, or moment approximations. On a suite of 13 benchmark problems, bilevel BO achieves lower regret, with fewer iterations and wall clock time. This advantage is robust to initialization set size, exploration parameters, and inner-solver choice.

cs.LG

Industrial electrification in the era of data centers: A Bayesian Optimization approach for grid-aware large load allocation

Large loads from industrial electrification and data centers are reshaping the planning and operation of the power grid. Identifying optimal large load siting decisions while accounting for transmission congestion is key to reducing expansion cost and operational risks. In this paper, we propose a leader-follower bilevel optimization framework to identify optimal large load allocation strategies. The leader determines the allocation of large loads, while the followers determine grid expansion cost and transmission utilization. This modeling approach explicitly integrates strategic planning with detailed short-term operational decisions. Moreover, we develop a Bayesian Optimization approach to efficiently solve the bilevel optimization problem by treating the followers as a black box. We use the framework to study large-scale load allocation from electrified oil refineries and data centers on a synthetic power grid that resembles key characteristics of the Texas (ERCOT) system. The results show that these large loads compete for electricity, and under high-load scenarios, data center demand is distributed across the entire grid, avoiding regions with high demand from industrial electrification.

eess.SY

Grid Capacity Expansion under Data Centers and Electrified Manufacturing Large Loads

In this paper, we consider the expansion of power grids under emerging large loads from data centers and electrified manufacturing. We develop a multi-period grid capacity expansion model to determine optimal investment profiles for power generation, storage, and transmission capacity while accounting for hourly power dispatch, such that electricity demand is satisfied and the total planning and operation cost is minimized. We also propose a new modeling approach regarding the spatial distribution of demand from large loads. The model is used to analyze the expansion of a synthetic grid that follows key characteristics of the ERCOT system over a seven-year planning horizon, under loads from data centers and electrified oil refining, which account for 17.5% and 4.7% of total annual electricity demand by the end of the planning horizon. The optimal investment policy leads to an 83.6% increase in generation capacity and exploits the short construction times of solar and storage as well as the operational flexibility of thermal generators. Finally, sensitivity analysis reveals that the construction time of grid assets substantially impacts investment timing, generation technology mix, and transmission capacity expansion. The proposed modeling framework is general and can be extended to other grid systems, enabling the exploration of diverse demand scenarios, policy assumptions, and regional characteristics.

eess.SY

Using the SEKF to Transfer NN Models of Dynamical Systems with Limited Data

Data-driven models of dynamical systems require extensive amounts of training data. For many practical applications, gathering sufficient data is not feasible due to cost or safety concerns. This work uses the Subset Extended Kalman Filter (SEKF) to adapt pre-trained neural network models to new, similar systems with limited data available. Experimental validation across damped spring and continuous stirred-tank reactor systems demonstrates that small parameter perturbations to the initial model capture target system dynamics while requiring as little as 1% of original training data. In addition, finetuning requires less computational cost and reduces generalization error.

cs.LG

Staying Alive: Online Neural Network Maintenance and Systemic Drift

We present the Subset Extended Kalman Filter (SEKF) as a method to update previously trained model weights online rather than retraining or finetuning them when the system a model represents drifts away from the conditions under which it was trained. We identify the parameters to be updated using the gradient of the loss function and use the SEKF to update only these parameters. We compare finetuning and SEKF for online model maintenance in the presence of systemic drift through four dynamic regression case studies and find that the SEKF is able to maintain model accuracy as-well if not better than finetuning while requiring significantly less time per iteration, and less hyperparameter tuning.

cs.LG

Short-Term Solar Irradiance Forecasting Under Data Transmission Constraints

We report a data-parsimonious machine learning model for short-term forecasting of solar irradiance. The model inputs include sky camera images that are reduced to scalar features to meet data transmission constraints. The output irradiance values are transformed to focus on unknown short-term dynamics. Inspired by control theory, a noise input is used to reflect unmeasured variables and is shown to improve model predictions, often considerably. Five years of data from the NREL Solar Radiation Research Laboratory were used to create three rolling train-validate sets and determine the best representations for time, the optimal span of input measurements, and the most impactful model input data (features). For the chosen test data, the model achieves a mean absolute error of 74.34 $W/m^2$ compared to a baseline 134.35 $W/m^2$ using the persistence of cloudiness model.

cs.LG

DySMHO: Data-Driven Discovery of Governing Equations for Dynamical Systems via Moving Horizon Optimization

Discovering the governing laws underpinning physical and chemical phenomena is a key step towards understanding and ultimately controlling systems in science and engineering. We introduce Discovery of Dynamical Systems via Moving Horizon Optimization (DySMHO), a scalable machine learning framework for identifying governing laws in the form of differential equations from large-scale noisy experimental data sets. DySMHO consists of a novel moving horizon dynamic optimization strategy that sequentially learns the underlying governing equations from a large dictionary of basis functions. The sequential nature of DySMHO allows leveraging statistical arguments for eliminating irrelevant basis functions, avoiding overfitting to recover accurate and parsimonious forms of the governing equations. Canonical nonlinear dynamical system examples are used to demonstrate that DySMHO can accurately recover the governing laws, is robust to high levels of measurement noise and that it can handle challenges such as multiple time scale dynamics.

math.DS

Identification and online updating of dynamic models for demand response of an industrial air separation unit

Demand-response operation of air separation units requires frequent changes in production rate(s), and scheduling calculations must explicitly consider process dynamics to ensure feasibility of the solutions. To this end, scale-bridging models (SBMs) approximate the scheduling-relevant dynamics of a process and its controller in a low-order representation. In contrast to previous works that have employed nonlinear SBMs, this paper proposes linear SBMs, developed using time-series analysis, to facilitate online scheduling computations. Using a year-long industrial dataset, we find that compact linear SBMs are suitable approximations over typical scheduling horizons, but that their accuracies are unpredictable over time. We introduce a strategy for online updating of the SBMs, based on Kalman filtering schemes for online parameter estimation. The approach greatly improves the accuracy of SBM predictions and will enable the use of linear SBM-based demand-response scheduling in the future.

math.OC

Modeling, state estimation, and optimal control for the US COVID-19 outbreak

The novel coronavirus SARS-CoV-2 and resulting COVID-19 disease have had an unprecedented spread and continue to cause an increasing number of fatalities worldwide. While vaccines are still under development, social distancing, extensive testing, and quarantining of confirmed infected subjects remain the most effective measures to contain the pandemic. These measures carry a significant socioeconomic cost. In this work, we introduce a novel optimization-based decision-making framework for managing the COVID-19 outbreak in the US. This includes modeling the dynamics of affected populations, estimating the model parameters and hidden states from data, and an optimal control strategy for sequencing social distancing and testing events such that the number of infections is minimized. The analysis of our extensive computational efforts reveals that social distancing and quarantining are most effective when implemented early, with quarantining of confirmed infected subjects having a much higher impact. Further, we find that "on-off" policies alternating between strict social distancing and relaxing such restrictions can be effective at "flattening" the curve while likely minimizing social and economic cost.

q-bio.PE

Integrating production scheduling and process control using latent variable dynamic models

Given their increasing participation in fast-changing markets, the integration of scheduling and control is an important consideration in chemical process operations. This generally involves computing optimal production schedules using dynamic models, which is challenging due to the nonlinearity and high-dimensionality of the models of chemical processes. In this paper, we begin by observing that the intrinsic dimensionality of process dynamics (as relevant to scheduling) is often much lower than the number of model state and/or algebraic variables. We introduce a data mining approach to "learn" closed-loop process dynamics on a low-dimensional, latent manifold. The manifold dimensionality is selected based on a tradeoff between model accuracy and complexity. After projecting process data, system identification and optimal scheduling calculations can be performed in the low-dimensional, latent-variable space. We apply these concepts to schedule an air separation unit under time-varying electricity prices. We show that our approach reduces the computational effort, while offering more detailed dynamic information compared to previous related works.

math.OC

Designing convex repulsive pair potentials that favor assembly of kagome and snub square lattices

Building on a recently introduced inverse strategy, isotropic and convex repulsive pair potentials were designed that favor assembly of particles into kagome and equilateral snub square lattices. The former interactions were obtained by numerical solution of a variational problem that maximizes the range of density for which the ground state of the potential is the kagome lattice. Similar optimizations targeting the snub square lattice were also carried out, employing a constraint that required a minimum chemical potential advantage of the target over select competing structures. This constraint helped discover isotropic interactions that meaningfully favored the snub square lattice as the ground state structure despite the asymmetric spatial distribution of particles in its coordination shells and the presence of tightly competing structures. Consistent with earlier published results [Piñeros et al. J. Chem. Phys. 144, 084502 (2016)], enforcement of greater chemical potential advantages for the target lattice in the interaction optimization led to assemblies with enhanced thermal stability.

cond-mat.soft

Breadth versus depth: Interactions that stabilize particle assemblies to changes in density or temperature

We use inverse methods of statistical mechanics to explore trade-offs associated with designing interactions to stabilize self-assembled structures against changes in density or temperature. Specifically, we find isotropic,convex-repulsive pair potentials that maximize the density range for which a two-dimensional square lattice is the stable ground state subject to a constraint on the chemical potential advantage it exhibits over competing structures (i.e., 'depth' of the associated minimum on the chemical potential hypersurface). We formulate the design problem as a non-linear program, which we solve numerically. This allows us to efficiently find optimized interactions for a wide range of possible chemical potential constraints. We find that assemblies designed to exhibit a large chemical potential advantage at a specified density have a smaller overall range of densities for which they are stable. This trend can be understood by considering the separation-dependent features of the pair potential and its gradient required to enhance the stability of the target structure relative to competitors. Using molecular dynamics simulations, we further show that potentials designed with larger chemical potential advantages exhibit higher melting temperatures.

cond-mat.soft