SearcharxivSearch

arXiv subjects

Michael Breza

Publications and source records attributed to Michael Breza.

8 recordsLinked to original sources

Dense Soft Weighting for Radar Ego-Velocity Estimation

Sensing ego-velocity estimation is fundamental to state estimation in visually degraded environments, where camera- and LiDAR-based pipelines can become unreliable. Millimetre-wave radar is well suited to these conditions because it provides direct Doppler velocity sensing and remains robust to poor illumination, textureless scenes, and airborne particulates. However, conventional radar ego-velocity pipelines typically apply constant false alarm rate (CFAR) thresholding to convert dense radar spectra into sparse point clouds, prematurely discarding sub-threshold returns that may still retain useful Doppler motion cues. We present Dense Soft Weighting, an analytic radar front-end that maps every range-Doppler cell to a continuous confidence metric rather than enforcing a binary detection threshold. Ego-velocity is then estimated using a deterministic robust weighted least-squares formulation, while the same weighted measurements provide a closed-form, measurement-derived velocity covariance for integration with a shared inertial back-end. The method requires no platform-specific training data or learning-based uncertainty model, supporting transfer across single-chip radar configurations. Across two public datasets and one self-collected dataset, Dense Soft Weighting reduces mean absolute pose error by 31-45% relative to the strongest CFAR point-cloud baseline under an identical inertial back-end, while running in real time on embedded hardware.

cs.RO

Dual-Security for Indoor OFDM-ISAC Systems via Temporal Artificial Noise

With the rapid development of integrated sensing and communication (ISAC) as a key enabler for future wireless networks, ensuring the security of both communication and sensing functions has become increasingly important. Current secure ISAC studies focus restrictively either on the communication or the sensing security, but not both. To bridge this gap, this paper investigates security for both, i.e., dual-security, in indoor orthogonal frequency division multiplexing (OFDM) based ISAC systems. Specifically, we consider a scenario in which a sensing user (SU) is authorised for sensing but may eavesdrop on communication data, while a communication user (CU) is authorised for communication but may perform unauthorised sensing. We chose this scenario as the pathological case where an authorised eavesdropper has more information and is more effective than an unauthorised one. To address this case, we propose the use of temporal artificial noise (AN) to prevent malicious CU sensing by enlarging its time-domain sensing error, and simultaneously degrade SU data eavesdropping by reducing its frequency-domain signal-to-noise-plus-interference ratio (SINR) with standard OFDM receiver processing. Meanwhile, our proposed scheme guarantees the sensing performance of the SU and the communication performance of the CU. We present numerical results that demonstrate AN can effectively provide dual protection for sensing and communication in OFDM-ISAC systems while guaranteeing the performance of legitimate users.

eess.SP

Dual Security for MIMO-OFDM ISAC Systems: Artificial Ghosts or Artificial Noise

Integrated sensing and communication (ISAC) enables the efficient sharing of wireless resources to support emerging applications, but it also gives rise to new sensing-based security vulnerabilities. Here, potential communication security threats whereby confidential messages intended for legitimate users are intercepted, but also unauthorized receivers (Eves) can passively exploit target echoes to infer sensing parameters without users being aware. Despite these risks, the joint protection of sensing and communication security in ISAC systems remains unexplored. To address this challenge, this paper proposes a two-layer dual-secure ISAC framework that simultaneously protects sensing and communication against passive sensing Eves and communication Eves, without requiring their channel state information (CSI). Specifically, transmit beamformers are jointly designed to inject artificial noise (AN) to introduce interference to communication Eves, while deliberately distorting the reference signal available to sensing Eves to impair their sensing capability. Furthermore, the proposed design generates artificial ghosts (AGs) with fake angle-range-velocity profiles observable by all receivers. Legitimate receivers can suppress these AGs, whereas sensing Eves cannot, thereby significantly reducing their probability of correctly detecting the true targets. Numerical results demonstrate that the proposed framework effectively enhances both communication and sensing security, while preserving the performance of communication users and legitimate sensing receivers.

eess.SP

IRONWAN: Increasing Reliability of Overlapping Networks in LoRaWAN

LoRaWAN deployments follow an ad-hoc deployment model that has organically led to overlapping communication networks, sharing the wireless spectrum, and completely unaware of each other. LoRaWAN uses ALOHA-style communication where it is almost impossible to schedule transmission between networks belonging to different owners properly. The inability to schedule overlapping networks will cause inter-network interference, which will increase node-to-gateway message losses and gateway-to-node acknowledgement failures. This problem is likely to get worse as the number of LoRaWAN networks increase. In response to this problem, we propose IRONWAN, a wireless overlay network that shares communication resources without modifications to underlying protocols. It utilises the broadcast nature of radio communication and enables gateway-to-gateway communication to facilitate the search for failed messages and transmit failed acknowledgements already received and cached in overlapping network's gateways. IRONWAN uses two novel algorithms, a Real-time Message Inter-arrival Predictor, to highlight when a server has not received an expected uplink message. The Interference Predictor ensures that extra gateway-to-gateway communication does not negatively impact communication bandwidth. We evaluate IRONWAN on a 1000-node simulator with up to ten gateways and a 10-node testbed with 2-gateways. Results show that IRONWAN can achieve up to 12\% higher packet delivery ratio (PDR) and total messages received per node while increasing the minimum PDR by up to 28\%. These improvements save up to 50\% node's energy. Finally, we demonstrate that IRONWAN has comparable performance to an optimal solution (wired, centralised) but with 2-32 times lower communication costs. IRONWAN also has up to 14\% better PDR when compared to FLIP, a wired-distributed gateway-to-gateway protocol in certain scenarios.

cs.NI

Dataset: LoED: The LoRaWAN at the Edge Dataset

This paper presents the LoRaWAN at the Edge Dataset (LoED), an open LoRaWAN packet dataset collected at gateways. Real-world LoRaWAN datasets are important for repeatable sensor-network and communications research and evaluation as, if carefully collected, they provide realistic working assumptions. LoED data is collected from nine gateways over a four month period in a dense urban environment. The dataset contains packet header information and all physical layer properties reported by gateways such as the CRC, RSSI, SNR and spreading factor. Files are provided to analyse the data and get aggregated statistics. The dataset is available at: doi.org/10.5281/zenodo.4121430

cs.NI

Control Communication Co-Design for Wide Area Cyber-Physical Systems

Wide Area Cyber-Physical Systems (WA-CPSs) are a class of control systems that integrate low-powered sensors, heterogeneous actuators and computer controllers into large infrastructure that span multi-kilometre distances. Current wireless communication technologies are incapable of meeting the communication requirements of range and bounded delays needed for the control of WA-CPSs. To solve this problem, we use a Control-Communication Co-design approach for WA-CPSs, that we refer to as the $C^3$ approach, to design a novel Low-Power Wide Area (LPWA) MAC protocol called \textit{Ctrl-MAC} and its associated event-triggered controller that can guarantee the closed-loop stability of a WA-CPS. This is the first paper to show that LPWA wireless communication technologies can support the control of WA-CPSs. LPWA technologies are designed to support one-way communication for monitoring and are not appropriate for control. We present this work using an example of a water distribution network application which we evaluate both through a co-simulator (modelling both physical and cyber subsystems) and testbed deployments. Our evaluation demonstrates full control stability, with up to $50$\% better packet delivery ratios and $80$\% less average end-to-end delays when compared to a state of the art LPWA technology. We also evaluate our scheme against an idealised, wired, centralised, control architecture and show that the controller maintains stability and the overshoots remain within bounds.

eess.SY

The Separator, a Two-Phase Oil and Water Gravity CPS Separator Testbed

Industrial Control Systems (ICS) are evolving with advances in new technology. The addition of wireless sensors and actuators and new control techniques means that engineering practices from communication systems are being integrated into those used for control systems. The two are engineered in very different ways. Neither engineering approach is capable of accounting for the subtle interactions and interdependence that occur when the two are combined. This paper describes our first steps to bridge this gap, and push the boundaries of both computer communication system and control system design. We present The Separator testbed, a Cyber-Physical testbed enabling our search for a suitable way to engineer systems that combine both computer networks and control systems.

cs.OH

XPC: Fast and Reliable Synchronous Transmission Protocols for 2-Phase Commit and 3-Phase Commit

One of the major challenges for the engineering of wireless sensing systems is to improve the software abstractions and frameworks that are available to programmers while ensuring system reliability and efficiency. The distributed systems community have developed a rich set of such abstractions for building dependable distributed systems connected using wired networks, however after 20 years research many of these elude wireless sensor systems. In this paper we present X Process Commit (XPC) an atomic commit protocol framework that utilizes Synchronous Transmission (ST). We also introduce Hybrid, a technique that allows us to exploit the advantages of the Glossy and Chaos Synchronous Transmission primitives to get lower latency and higher reliability than either. Using XPC and Hybrid we demonstrate how to build protocols for the classical 2-phase and 3-phase commit abstractions and evaluate these demonstrating significantly improved performance and reliability than the use of Glossy or Chaos individually as dissemination primitives. We address how we overcame the timing challenges of bringing Glossy and Chaos together to form Hybrid and through extensive experimentation demonstrate that it is robust to in-network radio interference caused by multiple sources. We are first to present testbed results that show that Hybrid can provide almost 100% reliability in a network of nodes suffering from various levels of radio interference.

cs.DC