arXiv subjects

Michael Febbraro

Publications and source records attributed to Michael Febbraro.

6 recordsLinked to original sources

arXiv2026

Pixelated Plastic Scintillator Array Manufacturing using Fast-, Photo-Curable Resin

Pixelated plastic scintillator arrays can serve as high efficiency and high resolution neutron imaging detectors. Manufacturing these arrays is intensive in both time and labor. This work presents a fabrication method based on additive manufacturing for two-dimensional plastic organic scintillator arrays using a custom-built automated assembly machine and a custom photocurable resin that has significant non-aromatic acrylate oligomer content. The process involves two main stages: fully autonomous production of one-dimensional layered arrays, followed by semi-autonomous cutting and stacking to form two-dimensional pixel arrays. One-dimensional arrays were manufactured at a rate of around 4 layers per hour with minimal defects and tight dimensional tolerances, while two-dimensional arrays up to 7 x 7 pixels and 70 mm in length were completed in approximately 3.5 hours. Final arrays exhibited dimensional deviations of less than 0.5 mm. Two-dimensional arrays read out by a multi-anode photomultiplier tube demonstrated per-pixel position resolution and pulse-shape discrimination, enabling gamma-neutron interaction separation in mixed radiation environments.

physics.ins-det↗

arXiv2025

High-resolution 3D-printed plastic scintillators with tertiary dye

Additive manufacturing offers efficient production of plastic scintillators with nontrivial geometries using vat polymerization, allowing fabrication of geometries which would be difficult or even impossible to produce using conventional subtractive manufacturing. This work presents a novel photocurable scintillator formula that includes coumarin 450 as a tertiary dye to enable high-resolution 3D printing via the manipulation of the 405 nm cure light. Bulk photocured and 3D printed (with and without tertiary dye) samples were compared through observational assessment and spectral response. All samples showed pulse shape discrimination between neutron and gamma events. Inclusion of the tertiary dye has minimal impact on emission spectrum and light output, but significant impact on print resolution as shown by comparison of printed high-complexity geometries and feature resolution test objects. With the use of a cure-limiting dye, unsupported features, such as freestanding pillars, were resolvable down to 0.7 mm. Even finer resolution at or below 0.1 mm was achieved in fully supported, integrated structures printed with off-the-shelf 405 nm desktop 3D printer. Scintillators demonstrated a light output up to 50% of EJ-200 with a PSD figure of merit up to 1.35 at 0.9-1.1 MeVee.

physics.ins-det↗

arXiv2022

Light Response of Poly(ethylene 2,6-napthalate) to Neutrons

There is increasing necessity for low background active materials as ton-scale, rare-event and cryogenic detectors are developed. Poly(ethylene-2,6-naphthalate) (PEN) has been considered for these applications because of its robust structural characteristics, and its scintillation light in the blue wavelength region. Radioluminescent properties of PEN have been measured to aid in the evaluation of this material. In this article we present a measurement of PEN's quenching factor using three different neutron sources; neutrons emitted from spontaneous fission in $^{252}$Cf, neutrons generated from a DD generator, and neutrons emitted from the $^{13}$C($\alpha$,n)$^{16}$O and the $^{7}$Li(p,n)$^{7}$Be nuclear reactions. The fission source used time-of-flight to determine the neutron energy, and the neutron energy from the nuclear reactions was defined using thin targets and reaction kinematics. The Birk's factor and scintillation efficiency were found to be $kB = 0.12 \pm 0.01$ mm MeV$^{-1}$ and $S = 1.31\pm0.09$ MeV$_{ee}$ MeV$^{-1}$ from a simultaneous analysis of the data obtained from the three different sources. With these parameters, it is possible to evaluate PEN as a viable material for large-scale, low background physics experiments.

physics.ins-det↗

arXiv2022

Photon counting from the vacuum ultraviolet to the short wavelength infrared using semiconductor and superconducting technologies

In the last decade, several photon counting technologies have been developed opening a new window for experiments in the low photon number regime. Several ongoing and future projects in HEP benefit from these developments, which will also have a large impact outside HEP. During the next decade there is a clear technological opportunity to fully develop these sensors and produce a large impact in HEP. In this white paper we discuss the need for photon counting technologies in future projects, and present some technological opportunities to address those needs.

physics.ins-det↗

arXiv2022

Snowmass 2021 White Paper: The Windchime Project

The absence of clear signals from particle dark matter in direct detection experiments motivates new approaches in disparate regions of viable parameter space. In this Snowmass white paper, we outline the Windchime project, a program to build a large array of quantum-enhanced mechanical sensors. The ultimate aim is to build a detector capable of searching for Planck mass-scale dark matter purely through its gravitational coupling to ordinary matter. In the shorter term, we aim to search for a number of other physics targets, especially some ultralight dark matter candidates. Here, we discuss the basic design, open R&D challenges and opportunities, current experimental efforts, and both short- and long-term physics targets of the Windchime project.

hep-ex↗

arXiv2019

Doppler Broadening in $^{20}$Mg($\beta p\gamma$)$^{19}$Ne Decay

Background: The $^{15}$O($\alpha ,\gamma$)$^{19}$Ne bottleneck reaction in Type I x-ray bursts is the most important thermonuclear reaction rate to constrain experimentally, in order to improve the accuracy of burst light-curve simulations. A proposed technique to determine the thermonuclear rate of this reaction employs the $^{20}$Mg($\beta p\alpha$)$^{15}$O decay sequence. The key $^{15}$O($\alpha ,\gamma$)$^{19}$Ne resonance at an excitation of 4.03 MeV is now known to be fed in $^{20}$Mg($\beta p\gamma$)$^{19}$Ne; however, the energies of the protons feeding the 4.03 MeV state are unknown. Knowledge of the proton energies will facilitate future $^{20}$Mg($\beta p \alpha$)$^{15}$O measurements. Purpose: To determine the energy of the proton transition feeding the 4.03 MeV state in $^{19}$Ne. Method: A fast beam of $^{20}$Mg was implanted into a plastic scintillator, which was used to detect $\beta$ particles. 16 high purity germanium detectors were used to detect $\gamma$ rays emitted following $\beta p$ decay. A Monte Carlo method was used to simulate the Doppler broadening of $^{19}$Ne $\gamma$ rays and compare to the experimental data. Results: The center of mass energy between the proton and $^{19}$Ne, feeding the 4.03 MeV state, is measured to be 1.21${^{+0.25}_{-0.22}}$ MeV, corresponding to a $^{20}$Na excitation energy of 7.44${^{+0.25}_{-0.22}}$ MeV. Absolute feeding intensities and $\gamma$-decay branching ratios of $^{19}$Ne states were determined including the 1615 keV state. A new $\gamma$ decay branch from the 1536 keV state in $^{19}$Ne to the ground state is reported. The lifetime of the 1507 keV state in $^{19}$Ne is measured to be 4.3${^{+1.3}_{-1.1}}$ ps resolving discrepancies in the literature. Conflicting $^{20}$Mg($\beta p$) decay schemes in published literature are clarified.

nucl-ex↗