arXiv subjects

Michael Geiselmann

Publications and source records attributed to Michael Geiselmann.

At least 19 recordsLinked to original sources

arXiv2025

Breaking the bandwidth-efficiency trade-off in soliton microcombs via mode coupling

Dissipative Kerr solitons in optical microresonators have emerged as a powerful tool for compact and coherent frequency comb generation. Advances in nanofabrication have allowed precise dispersion engineering, unlocking octave-spanning soliton combs that are essential for applications such as optical atomic clocks, frequency synthesis, precision spectroscopy, and astronomical spectrometer calibration. However, a key challenge hindering their practical deployment is the intrinsic bandwidth-efficiency trade-off: achieving broadband soliton generation requires large pump detuning, which suppresses power coupling and limits pump-to-comb conversion efficiencies to only a few percent. Recent efforts using pulsed pumping or coupled-resonator architectures have improved efficiency to several tens of percent, yet their bandwidths remain below one-tenth of an octave, inadequate for applications demanding wide spectral coverage. Here, we overcome this limitation by harnessing mode interactions between spatial modes within a single microresonator. The mode hybridization creates an additional power-transfer channel that supports large pump detuning while maintaining strong pump-to-resonator coupling, enabling broadband soliton formation at substantially reduced pump power. Using this approach, we demonstrate an octave-spanning soliton microcomb with a record pump-to-comb conversion efficiency exceeding 50%. These results resolve the fundamental bandwidth-efficiency dilemma in soliton microcombs and paves the way toward fully-integrated, high-efficiency, ultrabroad comb sources for next-generation photonic systems.

physics.optics↗

arXiv2023

Femtosecond pulse amplification on a chip

Femtosecond laser pulses enable the synthesis of light across the electromagnetic spectrum and provide access to ultrafast phenomena in physics, biology, and chemistry. Chip-integration of femtosecond technology could revolutionize applications such as point-of-care diagnostics, bio-medical imaging, portable chemical sensing, or autonomous navigation. However, current chip-integrated pulse sources lack the required peak power and on-chip amplification of femtosecond pulses has been an unresolved challenge. Here, addressing this challenge, we report >50-fold amplification of 1 GHz-repetition-rate chirped femtosecond pulses in a CMOS-compatible photonic chip to 800 W peak power with 116 fs pulse duration. This power level is 2-3 orders of magnitude higher compared to those in previously demonstrated on-chip pulse sources and can provide the power needed to address key applications. To achieve this, detrimental nonlinear effects are mitigated through all-normal dispersion, large mode-area and rare-earth-doped gain waveguides. These results offer a pathway to chip-integrated femtosecond technology with peak power-levels characteristic of table-top sources.

physics.optics↗

arXiv2023

Watt-class CMOS-compatible power amplifier

Power amplifier is becoming a critical component for integrated photonics as the integrated devices try to carve out a niche in the world of real-world applications of photonics. That is because the signal generated from an integrated device severely lacks in power which is due mainly to the small size which, although gives size and weight advantage, limits the energy storage capacity of an integrated device due to the small volume, causing it to rely on its bench-top counterpart for signal amplification downstream. Therefore, an integrated high-power signal booster can play a major role by replacing these large solid-state and fiber-based benchtop systems. For decades, large mode area (LMA) technology has played a disruptive role by increasing the signal power and energy by orders of magnitude in the fiber-based lasers and amplifiers. Thanks to the capability of LMA fiber to support significantly larger optical modes the energy storage and handling capability has significantly increased. Such an LMA device on an integrated platform can play an important role for high power applications. In this work, we demonstrate LMA waveguide based CMOS compatible watt-class power amplifier with an on-chip output power reaching ~ 1W within a footprint of ~4mm2.The power achieved is comparable and even surpasses many fiber-based amplifiers. We believe this work opens up opportunities for integrated photonics to find real world application on-par with its benchtop counterpart.

physics.optics↗

arXiv2023

Chip-scale, CMOS-compatible, high energy passively Q-switched laser

Chip-scale, high-energy optical pulse generation is becoming increasingly important as we expand activities into hard to reach areas such as space and deep ocean. Q-switching of the laser cavity is the best known technique for generating high-energy pulses, and typically such systems are in the realm of large bench-top solid-state lasers and fiber lasers, especially in the long wavelength range >1.8 um, thanks to their large energy storage capacity. However, in integrated photonics, the very property of tight mode confinement, that enables a small form factor, becomes an impediment to high energy application due to small optical mode cross-section. In this work, we demonstrate complementary metal-oxide-semiconductor (CMOS) compatible, rare-earth gain based large mode area (LMA) passively Q-switched laser in a compact footprint. We demonstrate high on-chip output pulse energy of >150 nJ in single transverse fundamental mode in the eye-safe window (1.9 um), with a slope efficiency ~ 40% in a footprint of ~9 mm2. The high energy pulse generation demonstrated in this work is comparable or in many cases exceeds Q-switched fiber lasers. This bodes well for field applications in medicine and space.

physics.optics↗

arXiv2022

Low phase noise THz generation from a fiber-referenced Kerr microresonator soliton comb

THz oscillators generated via frequency-multiplication of microwaves are facing difficulty in achieving low phase noise. Photonics-based techniques, in which optical two tones are translated to a THz wave through opto-electronic conversion, are promising if the relative phase noise between the two tones is well suppressed. Here, a THz ($\approx$ 560 GHz) wave with a low phase noise is provided by a frequency-stabilized, dissipative Kerr microresonator soliton comb. The repetition frequency of the comb is stabilized to a long fiber in a two-wavelength delayed self-heterodyne interferometer, significantly reducing the phase noise of the THz wave. A measurement technique to characterize the phase noise of the THz wave beyond the limit of a frequency-multiplied microwave is also demonstrated, showing the superior phase noise of the THz wave to any other photonic THz oscillators (> 300 GHz).

physics.optics↗

arXiv2021

Frequency-scanned microresonator soliton comb with the tracking of the frequency of all comb modes

Rapid and large scanning of a dissipative Kerr-microresonator soliton comb with the characterization of all comb modes along with the separation of the comb modes is imperative for the emerging applications of the frequency-scanned soliton combs. However, the scan speed is limited by the gain of feedback systems and the measurement of the frequency shift of all comb modes has not been demonstrated. To overcome the limitation of the feedback, we incorporate the feedback with the feedforward. With the additional gain of > 40 dB by a feedforward signal, a dissipative Kerr-microresonator soliton comb is scanned by 70 GHz in 500 $\mu$s, 50 GHz in 125 $\mu$s, and 25 GHz in 50 $\mu$s (= 500 THz/s). Furthermore, we propose and demonstrate a method to measure the frequency shift of all comb modes, in which an imbalanced Mach-Zehnder interferometer with two outputs with different wavelengths is used. Because of the two degrees of freedom of optical frequency combs, the measurement at the two different wavelengths enables the estimation of the frequency shift of all comb modes.

physics.optics↗

arXiv2021

Effects of a quiet point on a Kerr microresonator frequency comb

A quiet point, an operating point of pump-resonance detuning that minimizes frequency fluctuation due to nonlinear effects inside a resonator, has been employed for phase noise reduction of a soliton Kerr microresonator frequency comb (microcomb). Naturally, it is expected that the use of the point will also improve performances of a microcomb in terms of frequency stability and faithfulness in a phase locked loop. In this study, we experimentally investigate the effect in a microcomb with a repetition frequency of 300~GHz. We obtain a lowest fractional frequency instability at a quiet point of $1.5\times 10^{-9}$ at 1 second, which is 44 times lower than free-running instability. Phase-locking of a microcomb to a stabilized fiber comb is demonstrated to evaluate performance in a feedback loop, where in-loop-limited relative fractional frequency instability between the microcomb and the fiber comb of $6.8 \times 10^{-13}$ is obtained as an indicator of the stability limitation.

physics.optics↗

arXiv2020

Integrated photonic interposers for processing octave-spanning microresonator frequency combs

Microcombs - optical frequency combs generated in microresonators - have advanced tremendously in the last decade, and are advantageous for applications in frequency metrology, navigation, spectroscopy, telecommunications, and microwave photonics. Crucially, microcombs offer the prospect of fully integrated miniaturized optical systems with unprecedented reductions in cost, size, weight, and power. However, this goal has been consistently hindered by the use of bulk free-space and fiber-optic components to process microcombs, limiting form factors to the table-top. Here, we address this challenge by introducing an integrated photonics interposer architecture to process microcombs and replace discrete components. Taking microcomb-based optical frequency synthesis in the telecom C-band around 1550 nm as our target application, we develop an interposer architecture that collects, routes, and interfaces octave-wide optical signals between photonic chiplets and heterogeneously integrated devices that constitute the synthesizer. We have implemented the octave spanning spectral filtering of a microcomb, central to the interposer, in the popular silicon nitride photonic platform, and have confirmed the requisite performance of the individual elements of the interposer. Moreover, we show that the thick silicon nitride needed for bright dissipative Kerr soliton generation can be integrated with the comparatively thin silicon nitride interposer layer through octave-bandwidth adiabatic evanescent coupling, indicating a path towards future system-level consolidation. Our interposer architecture addresses the immediate need for on-chip microcomb processing to successfully miniaturize microcomb systems. As microcombs and integrated devices evolve, our approach can be readily adapted to other metrology-grade applications based on optical atomic clocks and high-precision navigation and spectroscopy.

physics.app-ph↗

arXiv2020

300 GHz wave with attosecond-level timing noise

Optical frequency division (OFD) via optical frequency combs (OFC) has enabled a leap in microwave metrology leading to noise performance never explored before. Extending the method to millimeter-wave (mmW) and terahertz (THz)-wave domain is of great interest. Dissipative Kerr solitons (DKSs) in integrated photonic chips offer a unique feature of delivering OFCs with ultrahigh repetition rates from 10 GHz to 1 THz making them relevant gears to perform OFD in the mmW and THz-wave domain. We experimentally demonstrate OFD of an optically-carried 3.6 THz reference down to 300 GHz through a DKS, photodetected with an ultrafast uni-traveling-carrier photodiode (UTC-PD). A new measurement system, based on the characterization of a microwave reference phase-locked to the 300 GHz signal under test, yields attosecond-level timing noise sensitivity, leveraging conventional technical limitations. This work places DKSs as a leading technology in the mmW and THz-wave field promising breakthroughs in fundamental and civilian applications.

physics.optics↗

arXiv2019

Visible blue-to-red 10 GHz frequency comb via on-chip triple-sum frequency generation

A broadband visible blue-to-red, 10 GHz repetition rate frequency comb is generated by combined spectral broadening and triple-sum frequency generation in an on-chip silicon nitride waveguide. Ultra-short pulses of 150 pJ pulse energy, generated via electro-optic modulation of a 1560 nm continuous-wave laser, are coupled to a silicon nitride waveguide giving rise to a broadband near-infrared supercontinuum. Modal phase matching inside the waveguide allows direct triple-sum frequency transfer of the near-infrared supercontinuum into the visible wavelength range covering more than 250 THz from below 400 nm to above 600 nm wavelength. This scheme directly links the mature optical telecommunication band technology to the visible wavelength band and can find application in astronomical spectrograph calibration as well as referencing of continuous-wave lasers.

physics.optics↗

arXiv2019

Continuous scanning of a dissipative Kerr-microresonator soliton comb for broadband, high resolution spectroscopy

Dissipative Kerr-microresonator soliton combs (hereafter called soliton combs) are promising to realize chip scale integration of full soliton comb systems providing high precision, broad spectral coverage and a coherent link to the micro/mm/THz domain with diverse applications coming on line all the time. However, the large soliton comb spacing hampers some applications. For example, for spectroscopic applications, there are simply not enough comb lines available to sufficiently cover almost any relevant absorption features. Here, we overcome this limitation by scanning the comb mode spacing by employing PDH locking and a microheater on the microresonator, showing continuous scanning of the soliton comb modes across nearly the full FSR of the microresonator without losing soliton operation, while spectral features with a bandwidth of as small of 5 MHz are resolved. Thus, comb mode scanning allows to cover the whole comb mode spectrum of tens of THz bandwidth with only one chip-scale comb.

physics.app-ph↗

arXiv2018

Double inverse nanotapers for efficient light coupling to integrated photonic devices

Efficient light coupling into integrated photonic devices is of key importance to a wide variety of applications. "Inverse nanotapers" are widely used, in which the waveguide width is reduced to match an incident mode. Here, we demonstrate novel, "double inverse" tapers, in which we taper both the waveguide height, as well as the width. We demonstrate that in comparison to regular inverse tapers, the double inverse tapers have excellent polarization-independent coupling. In addition, the optimum coupling is achieved with much larger taper dimension, enabling the use of photolithography instead of electron beam lithography, relevant for applications at near-IR and visible wavelengths. The low coupling loss makes them particularly suitable for nonlinear photonics, e.g. supercontinuum and soliton micro-comb generation.

physics.app-ph↗

arXiv2017

Inter-mode breather solitons in optical microresonators

The observation of temporal dissipative Kerr solitons in optical microresonators provides, on the applied side, compact sources of coherent optical frequency combs that have already been applied in coherent communications, dual comb spectroscopy and metrology. On a fundamental level, it enables the study of soliton physics in driven nonlinear cavities. Microresonators are commonly multimode and, as a result, inter-mode interactions inherently occur among mode families - a condition referred to as "avoided mode crossings". Avoided mode crossings can cause soliton decay, but can also modify the soliton spectrum, leading to e.g. the formation of dispersive wave and inducing a spectral recoil. Yet, to date, the entailing temporal soliton dynamics from inter-mode interactions has rarely been studied, but is critical to understand regimes of soliton-stability. Here we report the discovery of an inter-mode breather soliton. Such breathing dynamics occurs within a laser detuning range where conventionally stationary dissipative solitons are expected. We demonstrate experimentally the phenomenon in two microresonator platforms (crystalline magnesium fluoride and photonic chip-based silicon nitride microresonators), and theoretically describe the dynamics based on a pair of coupled Lugiato-Lefever equations. We demonstrate experimentally that the breathing is associated with a periodic energy exchange between the soliton and another optical mode family. We further show that inter-mode interactions can be modeled by a response function acting on dissipative solitons. The observation of breathing dynamics in the conventionally stable soliton regime is critical to applications, ranging from low-noise microwave generation, frequency synthesis to spectroscopy. On a fundamental level, our results provide new understandings of the rich dissipative soliton dynamics in multimode nonlinear cavities.

physics.optics↗

arXiv2016

Coupling ideality of integrated planar high-Q microresonators

Chipscale microresonators with integrated planar optical waveguides are useful building blocks for linear, nonlinear and quantum optical devices. Loss reduction through improving fabrication processes has resulted in several integrated micro resonator platforms attaining quality (Q) factors of several millions. However only few studies have investigated design-dependent losses, especially with regard to the resonator coupling section. Here we investigate design-dependent parasitic losses, described by the coupling ideality, of the commonly employed microresonator design consisting of a microring resonator waveguide side-coupled to a straight bus waveguide. By systematic characterization of multi-mode high-Q silicon nitride microresonator devices, we show that this design can suffer from low coupling ideality. By performing full 3D simulations to numerically investigate the resonator to bus waveguide coupling, we identify the coupling to higher-order bus waveguide modes as the dominant origin of parasitic losses which lead to the low coupling ideality. Using suitably designed bus waveguides, parasitic losses are mitigated, and a nearly unity ideality and strong overcoupling (i.e. a ratio of external coupling to internal resonator loss rate > 9) are demonstrated. Moreover we find that different resonator modes can exchange power through the coupler, which therefore constitutes a mechanism that induces modal coupling, a phenomenon known to distort resonator dispersion properties. Our results demonstrate the potential for significant performance improvements of integrated planar microresonators, achievable by optimized coupler designs.

physics.optics↗

arXiv2016

Bringing short-lived dissipative Kerr soliton states in microresonators into a steady state

Dissipative Kerr solitons have recently been generated in optical microresonators, enabling ultrashort optical pulses at microwave repetition rates, that constitute coherent and numerically predictable Kerr frequency combs. However, the seeding and excitation of the temporal solitons is associated with changes in the intracavity power, that can lead to large thermal resonance shifts during the excitation process and render the soliton states in most commonly used resonator platforms short lived. Here we describe a "power kicking" method to overcome this instability by modulating the power of the pump laser. A fast modulation triggers the soliton formation, while a slow adjustment of the power compensates the thermal effect during the excitation laser scan. With this method also initially very short-lived (100ns) soliton states , as encountered in SiN integrated photonic microresonators, can be brought into a steady state in contrast to techniques reported earlier which relied on an adjustment of the laser scan speed only. Once the soliton state is in a steady state it can persist for hours and is thermally self-locked.

physics.optics↗

arXiv2016

Self-referencing of an on-chip soliton Kerr frequency comb without external broadening

Self-referencing turns pulsed laser systems into self-referenced frequency combs. Such frequency combs allow counting of optical frequencies and have a wide range of applications. The required optical bandwidth to implement self-referencing is typically obtained via nonlinear broadening in optical fibers. Recent advances in the field of Kerr frequency combs have provided a path towards the development of compact frequency comb sources that provide broadband frequency combs, exhibit microwave repetition rates and that are compatible with on-chip photonic integration. These devices have the potential to significantly expand the use of frequency combs. Yet to date self-referencing of such Kerr frequency combs has only been attained by applying conventional, fiber based broadening techniques. Here we demonstrate external broadening-free self-referencing of a Kerr frequency comb. An optical spectrum that spans two-thirds of an octave is directly synthesized from a continuous wave laser-driven silicon nitride microresonator using temporal dissipative Kerr soliton formation and soliton Cherenkov radiation. Using this coherent bandwidth and two continuous wave transfer lasers in a 2f-3f self-referencing scheme, we are able to detect the offset frequency of the soliton Kerr frequency comb. By stabilizing the repetition rate to a radio frequency reference the self-referenced frequency comb is used to count and track the continuous wave pump laser's frequency. This work demonstrates the principal ability of soliton Kerr frequency combs to provide microwave-to-optical clockworks on a chip.

physics.optics↗

arXiv2016

Frequency Comb Assisted Broadband Precision Spectroscopy with Cascaded Diode Lasers

Frequency comb assisted diode laser spectroscopy, employing both the accuracy of an optical frequency comb and the broad wavelength tuning range of a tunable diode laser, has been widely used in many applications. In this letter we present a novel method using cascaded frequency agile diode lasers, which allows extending the measurement bandwidth to 37.4 THz (1355 to 1630 nm) at MHz resolution with scanning speeds above 1 THz/s. It is demonstrated as a useful tool to characterize a broadband spectrum for molecular spectroscopy and in particular it enables to characterize the dispersion of integrated microresonators up to the fourth order.

physics.optics↗

arXiv2015

Photonic Damascene Process for Integrated High-Q Microresonator Based Nonlinear Photonics

High confinement, integrated silicon nitride (SiN) waveguides have recently emerged as attractive platform for on-chip nonlinear optical devices. The fabrication of high-Q SiN microresonators with anomalous group velocity dispersion (GVD) has enabled broadband nonlinear optical frequency comb generation. Such frequency combs have been successfully applied in coherent communication and ultrashort pulse generation. However, the reliable fabrication of high confinement waveguides from stoichiometric, high stress SiN remains challenging. Here we present a novel photonic Damascene fabrication process enabling the use of substrate topography for stress control and thin film crack prevention. With close to unity sample yield we fabricate microresonators with $1.35\,\mu\mathrm{m}$ thick waveguides and optical Q factors of $3.7\times10^{6}$ and demonstrate single temporal dissipative Kerr soliton (DKS) based coherent optical frequency comb generation. Our newly developed process is interesting also for other material platforms, photonic integration and mid infrared Kerr comb generation.

physics.optics↗