arXiv subjects

Michael Haas

Publications and source records attributed to Michael Haas.

14 recordsLinked to original sources

arXiv2025

Electrical Drive of a Josephson Junction Array using a Cryogenic BiCMOS Pulse Pattern Generator: Towards a Fully Integrated Josephson Arbitrary Waveform Synthesizer

We combine a cryogenic BiCMOS integrated circuit, which generates high-speed return-to-zero (RTZ) pulses, with a superconducting Josephson junction array. The BiCMOS circuit acts as a cryogenic pulse pattern generator, delivering data rates of 30 Gb/s, while consuming 302 mW at 4 K. Each electrical pulse of the serializer effectively transfers one magnetic flux quantum through every Josephson junction, so that the average output voltage of the array produces well-defined plateaus (Shapiro steps) in its current-to-voltage characteristic. To the best of our knowledge, this is the first integration of a Josephson junction array with a cryogenic BiCMOS chip. The presented results pave the way toward a hybrid and fully integrated Josephson arbitrary waveform synthesizer (JAWS) that can generate ultra-low-noise signals for quantum voltage metrology and quantum information systems.

cond-mat.supr-con↗

arXiv2025

All-mechanical coherence protection and fast control of a spin qubit

In a phononic quantum network, quantum information is stored and processed within stationary nodes defined by solid-state spins, and the information is routed between nodes by phonons. The phonon holds distinct advantages over its electromagnetic counterpart the photon, including smaller device footprints, reduced crosstalk, long coherence times at low temperatures, and strong interactions with both solid-state spins and electromagnetic waves. Enhanced interactions between a phononic cavity and a stationary qubit have been demonstrated in multiple platforms including superconducting qubits, spins in silicon carbide and spins in diamond. However, an outstanding issue is the compatibility between the spin's coupling to the resonant phononic cavity and the simultaneous use of pulse sequences to extend the coherence time of the spin by suppressing the low-frequency environmental noise. Here we demonstrate all-mechanical coherence protection of a solid-state spin qubit, where optical initialization, quantum operations, and readout are performed in a dressed basis that is highly immune to low-frequency noise and compatible with a phononic cavities. We additionally show record-high Rabi frequencies reaching 800 MHz, which allows for ultrafast quantum control. Our results establish a first step for high-fidelity, phonon-mediated quantum gates and represent a crucial advance toward robust on-chip quantum phononic networks.

quant-ph↗

arXiv2025

A scalable photonic quantum interconnect platform

Many quantum networking applications require efficient photonic interfaces to quantum memories which can be produced at scale and with high yield. Synthetic diamond offers unique potential for the implementation of this technology as it hosts color centers which retain coherent optical interfaces and long spin coherence times in nanophotonic structures. Here, we report a technique enabling wafer-scale processing of thin-film diamond that combines ion implantation and membrane liftoff, high-quality overgrowth, targeted color center implantation, and serial, high-throughput thermocompression bonding with yields approaching unity. The deterministic deposition of thin diamond membranes onto semiconductor substrates facilitates consistent integration of photonic crystal cavities with silicon-vacancy (SiV) quantum memories. We demonstrate reliable, strong coupling of SiVs to photons with cooperativities approaching 100. Furthermore, we show that photonic crystal cavities can be reliably fabricated across several membranes bonded to the same handling chip. Our platform enables modular fabrication where the photonic layer can be integrated with functionalized substrates featuring electronic control lines such as coplanar waveguides for microwave delivery. Finally, we implement passive optical packaging with sub-decibel insertion loss. Together, these advances pave the way to the scalable assembly of optically addressable quantum memory arrays which are a key building block for modular photonic quantum interconnects.

quant-ph↗

arXiv2025

Universal dynamics and microwave control of programmable cavity electro-optic frequency combs

Electro-optic (EO) frequency combs are foundational for metrology and spectroscopy. Specifically, microresonator-based cavity EO combs are distinguished by efficient sideband generation, precisely controlled by microwave signals, enabling high-performance integrated frequency references and pulse sources. However, the apparent simplicity of these devices, often described by the EO modulation-induced coupling of nearest-neighbor cavity modes, has limited investigations of their fundamental physics, thereby restricting their full potential. Here, we uncover the universal dynamics and complete frequency lattice connectivity underpinning cavity EO microcombs, as well as characterize the full space of nonlinear optical states, controlled by modulation depth and optical detuning, using the thin-film lithium niobate photonic platform. Leveraging this understanding, we design complex long-range couplings between cavity modes to realize programmable spectro-temporal shaping of the generated combs and pulses. We achieve three technological advances, including repetition-rate flexibility, substantial comb bandwidth extension beyond traditional scaling laws, and resonantly-enhanced flat-top spectrum. Our results provide physical insights for synchronously driven cavity-based EO systems, broadly defined, paving the way for electrically controlled and electrically enhanced comb generators for next-generation photonic applications.

physics.optics↗

arXiv2025

Purcell-enhanced spin-phonon coupling with a single color center

The radiative properties of atoms are inherently linked to their surrounding environment. Placing an electromagnetic resonator around atoms can enhance spontaneous emission, as shown by Purcell in the 1940s. This approach is now routinely used in quantum computing and communication to channel photons emitted by atoms into well-defined modes and control atom-photon interactions. For solid-state artificial atoms, such as color-centers, the host lattice introduces an acoustic environment, allowing excited atoms to relax by emitting phonons. Here we observe the acoustic Purcell effect by constructing a specially engineered, microwave-frequency nanomechanical resonator around a color-center spin qubit in diamond. Using a co-localized optical mode of the structure that strongly couples to the color-center's excited state, we perform single-photon-level laser spectroscopy at milliKelvin temperatures and observe ten-fold faster spin relaxation when the spin qubit is tuned into resonance with a 12 GHz acoustic mode. Additionally, we use the color-center as an atomic-scale probe to measure the broadband phonon spectrum of the nanostructure up to a frequency of 28 GHz. Our work establishes a new regime of control for quantum defects in solids and paves the way for interconnects between atomic-scale quantum memories and qubits encoded in acoustic and superconducting devices.

quant-ph↗

arXiv2025

Purcell-enhanced emissions from diamond color centers in slow light photonic crystal waveguides

Quantum memories based on emitters with optically addressable spins rely on efficient photonic interfaces, often implemented as nanophotonic cavities with ideally narrow spectral linewidths and small mode volumes. However, these approaches require nearly perfect spectral and spatial overlap between the cavity mode and quantum emitter, which can be challenging. This is especially true in the case of solid-state quantum emitters that are often randomly positioned and can suffer from significant inhomogeneous broadening. An alternative approach to mitigate these challenges is to use slow-light waveguides that can enhance light-matter interaction across large optical bandwidths and large areas. Here, we demonstrate diamond slow light photonic crystal (PhC) waveguides that enable broadband optical coupling to embedded silicon-vacancy (SiV) color centers. We take advantage of the recently demonstrated thin-film diamond photonic platform to fabricate fully suspended two-dimensional PhC waveguides. Using this approach, we demonstrate waveguide modes with high group indices up to 70 and observe Purcell-enhanced emissions of the SiVs coupled to the waveguide mode. Our approach represents a practical diamond platform for robust spin-photon interfaces with color centers.

quant-ph↗

arXiv2024

High-Q Cavity Interface for Color Centers in Thin Film Diamond

Quantum information technology offers the potential to realize unprecedented computational resources via secure channels capable of distributing entanglement between quantum computers. Diamond, as a host to atom-like defects with optically-accessible spin qubits, is a leading platform to realize quantum memory nodes needed to extend the reach of quantum links. Photonic crystal (PhC) cavities enhance light-matter interaction and are essential ingredients of an efficient interface between spins and photons that are used to store and communicate quantum information respectively. Despite great effort, however, the realization of visible PhC cavities with high quality factor (Q) and design flexibility is challenging in diamond. Here, we demonstrate one- and two-dimensional PhC cavities fabricated in recently developed thin-film diamonds, featuring Q-factors of 1.8x10$^5$ and 1.6x10$^5$, respectively, the highest Qs for visible PhC cavities realized in any material. Importantly, our fabrication process is simple and high-yield, based on conventional planar fabrication techniques, in contrast to previous approaches that rely on complex undercut methods. We also demonstrate fiber-coupled 1D PhC cavities with high photon extraction efficiency, and optical coupling between a single SiV center and such a cavity at 4K achieving a Purcell factor of 13. The demonstrated diamond thin-film photonic platform will improve the performance and scalability of quantum nodes and expand the range of quantum technologies.

quant-ph↗

arXiv2023

High Q-factor diamond optomechanical resonators with silicon vacancy centers at millikelvin temperatures

Phonons are envisioned as coherent intermediaries between different types of quantum systems. Engineered nanoscale devices such as optomechanical crystals (OMCs) provide a platform to utilize phonons as quantum information carriers. Here we demonstrate OMCs in diamond designed for strong interactions between phonons and a silicon vacancy (SiV) spin. Using optical measurements at millikelvin temperatures, we measure a linewidth of 13 kHz (Q-factor of ~440,000) for 6 GHz acoustic modes, a record for diamond in the GHz frequency range and within an order of magnitude of state-of-the-art linewidths for OMCs in silicon. We investigate SiV optical and spin properties in these devices and outline a path towards a coherent spin-phonon interface.

physics.optics↗

arXiv2023

Engineering Phonon-Qubit Interactions using Phononic Crystals

The ability to control phonons in solids is key for diverse quantum applications, ranging from quantum information processing to sensing. Often, phonons are sources of noise and decoherence, since they can interact with a variety of solid-state quantum systems. To mitigate this, quantum systems typically operate at milli-Kelvin temperatures to reduce the number of thermal phonons. Here we demonstrate an alternative approach that relies on engineering phononic density of states, drawing inspiration from photonic bandgap structures that have been used to control the spontaneous emission of quantum emitters. We design and fabricate diamond phononic crystals with a complete phononic bandgap spanning 50 - 70 gigahertz, tailored to suppress interactions of a single silicon-vacancy color center with resonant phonons of the thermal bath. At 4 Kelvin, we demonstrate a reduction of the phonon-induced orbital relaxation rate of the color center by a factor of 18 compared to bulk. Furthermore, we show that the phononic bandgap can efficiently suppress phonon-color center interactions up to 20 Kelvin. In addition to enabling operation of quantum memories at higher temperatures, the ability to engineer qubit-phonon interactions may enable new functionalities for quantum science and technology, where phonons are used as carriers of quantum information.

quant-ph↗

arXiv2014

Transport Coefficients in Yang--Mills Theory and QCD

We calculate the shear viscosity over entropy density ratio $η/s$ in Yang--Mills theory from the Kubo formula using an exact diagrammatic representation in terms of full propagators and vertices using gluon spectral functions as external input. We provide an analytic fit formula for the temperature dependence of $η/s$ over the whole temperature range from a glueball resonance gas at low temperatures, to a high-temperature regime consistent with perturbative results. Subsequently we provide a first estimate for $η/s$ in QCD.

hep-ph↗

arXiv2014

The K2 Mission: Characterization and Early results

The K2 mission will make use of the Kepler spacecraft and its assets to expand upon Kepler's groundbreaking discoveries in the fields of exoplanets and astrophysics through new and exciting observations. K2 will use an innovative way of operating the spacecraft to observe target fields along the ecliptic for the next 2-3 years. Early science commissioning observations have shown an estimated photometric precision near 400 ppm in a single 30 minute observation, and a 6-hour photometric precision of 80 ppm (both at V=12). The K2 mission offers long-term, simultaneous optical observation of thousands of objects at a precision far better than is achievable from ground-based telescopes. Ecliptic fields will be observed for approximately 75-days enabling a unique exoplanet survey which fills the gaps in duration and sensitivity between the Kepler and TESS missions, and offers pre-launch exoplanet target identification for JWST transit spectroscopy. Astrophysics observations with K2 will include studies of young open clusters, bright stars, galaxies, supernovae, and asteroseismology.

astro-ph.IM↗

arXiv2014

Validation of Kepler's Multiple Planet Candidates. III: Light Curve Analysis & Announcement of Hundreds of New Multi-planet Systems

The Kepler mission has discovered over 2500 exoplanet candidates in the first two years of spacecraft data, with approximately 40% of them in candidate multi-planet systems. The high rate of multiplicity combined with the low rate of identified false-positives indicates that the multiplanet systems contain very few false-positive signals due to other systems not gravitationally bound to the target star (Lissauer, J. J., et al., 2012, ApJ 750, 131). False positives in the multi- planet systems are identified and removed, leaving behind a residual population of candidate multi-planet transiting systems expected to have a false-positive rate less than 1%. We present a sample of 340 planetary systems that contain 851 planets that are validated to substantially better than the 99% confidence level; the vast majority of these have not been previously verified as planets. We expect ~2 unidentified false-positives making our sample of planet very reliable. We present fundamental planetary properties of our sample based on a comprehensive analysis of Kepler light curves and ground-based spectroscopy and high-resolution imaging. Since we do not require spectroscopy or high-resolution imaging for validation, some of our derived parameters for a planetary system may be systematically incorrect due to dilution from light due to additional stars in the photometric aperture. None the less, our result nearly doubles the number of verified exoplanets.

astro-ph.EP↗

arXiv2013

Gluon spectral functions and transport coefficients in Yang--Mills theory

We compute non-perturbative gluon spectral functions at finite temperature in quenched QCD with the maximum entropy method. We also provide a closed loop equation for the spectral function of the energy-momentum tensor in terms of the gluon spectral function. This setup is then used for computing the shear viscosity over entropy ratio $η/s$ in a temperature range from about $0.4\, T_c$ to $4.5\, T_c$. The ratio $η/s$ has a minimum at about $1.25\, T_c$ with the value of about 0.115. We also discuss extensions of the present results to QCD.

hep-ph↗

arXiv2011

Characteristics of planetary candidates observed by Kepler, II: Analysis of the first four months of data

On 1 February 2011 the Kepler Mission released data for 156,453 stars observed from the beginning of the science observations on 2 May through 16 September 2009. There are 1235 planetary candidates with transit like signatures detected in this period. These are associated with 997 host stars. Distributions of the characteristics of the planetary candidates are separated into five class-sizes; 68 candidates of approximately Earth-size (radius < 1.25 Earth radii), 288 super-Earth size (1.25 Earth radii < radius < 2 Earth radii), 662 Neptune-size (2 Earth radii < radius < 6 Earth radii), 165 Jupiter-size (6 Earth radii < radius < 15 Earth radii), and 19 up to twice the size of Jupiter (15 Earth radii < radius < 22 Earth radii). In the temperature range appropriate for the habitable zone, 54 candidates are found with sizes ranging from Earth-size to larger than that of Jupiter. Five are less than twice the size of the Earth. Over 74% of the planetary candidates are smaller than Neptune. The observed number versus size distribution of planetary candidates increases to a peak at two to three times Earth-size and then declines inversely proportional to area of the candidate. Our current best estimates of the intrinsic frequencies of planetary candidates, after correcting for geometric and sensitivity biases, are 6% for Earth-size candidates, 7% for super-Earth size candidates, 17% for Neptune-size candidates, and 4% for Jupiter-size candidates. Multi-candidate, transiting systems are frequent; 17% of the host stars have multi-candidate systems, and 33.9% of all the candidates are part of multi-candidate systems.

astro-ph.EP↗