arXiv subjects

Michael J. Link

Publications and source records attributed to Michael J. Link.

12 recordsLinked to original sources

arXiv2026

Detectors for CLASS-W2: The second 90 GHz telescope of the Cosmology Large Angular Scale Surveyor

The Cosmology Large Angular Scale Surveyor (CLASS) is measuring the Cosmic Microwave Background (CMB) polarization anisotropy on the largest angular scales (>1 degree) to probe the epochs of inflation and reionization. To enhance the CMB mapping speed, we have built, tested, and commissioned in August 2025 a second 90 GHz receiver (CLASS-W2) with a detector focal plane composed of feedhorn-coupled Transition Edge Sensor (TES) bolometers fabricated at NIST-Boulder. The focal plane consists of four modules, each containing 37 feedhorns coupling orthogonal polarizations onto two TES bolometers, for a total of 296 optically sensitive detectors. Laboratory tests show highly uniform TES properties with an array average critical temperature of 184+-3 mK, a thermal conductance of 460+-47 pW/K, and a normal resistance of 7.8+-0.3 mOhms. The detector array has an average band center frequency of 95.2 GHz with 28.3 GHz bandwidth, and achieves a detector yield of 94%. On-sky measurements indicate a mean detector optical load of 3.3 pW, corresponding to an antenna temperature of ~23 K. The array's average beam solid angle is 124 $\mu$sr, with a full width at half maximum of 0.592 degrees, and the end-to-end average optical efficiency is 0.37. We find that high-frequency 'blue-leak' radiation couples directly to the TES bolometer islands; adding a metal-mesh low-pass filter with cutoff frequency of 157 GHz in front of the focal plane suppresses the 'blue-leak' power by 0.9 pW. The four-module array achieves a noise-equivalent temperature of NET= 16 uKrtS. Adding this array has boosted the CLASS 90 GHz mapping speed by 41%.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Characterization of All DC/RF Routing Wafers for Detector Modules

The Simons Observatory (SO) is a cosmic microwave background experiment with over 67,000 polarization-sensitive transition-edge sensor (TES) detectors currently installed for use in observations and plans to increase the total detector count to ${\sim}$98,000 detectors with the Advanced SO upgrade. The TES arrays are packaged into Universal Focal-Plane Modules (UFMs), which also contain the multiplexing readout circuit. Within a readout module, a DC/RF routing wafer provides a cold interface between the detectors and the readout multiplexing chips. Each routing wafer hosts twelve bias lines, which contain the ${\sim}$400 ${\mu}{\Omega}$ shunt resistors that are part of the TES bias circuitry. More than 70 routing wafers have been fabricated and tested both at room temperature and 100 mK before integration into UFMs. The lab measurements for all screened wafers have been compiled to show the distribution of measured average shunt resistance Rsh for each bias line, both across bias lines on a single routing wafer and across all routing wafers. The mean average shunt resistance for all wafers was found to be 396 ${\mu}{\Omega}$ with a standard deviation of 16 ${\mu}{\Omega}$, or ${\sim}$4%. For each wafer, we note good uniformity of average Rsh between bias lines, with a slight downward trend with increasing distance from the center of the wafer. The fabrication data collected at room temperature shows agreement with the cryogenic measurements of Rsh distribution.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Characterization of the 220/280 GHz TES Detector Modules

The Simons Observatory (SO) is a new suite of cosmic microwave background telescopes in the Chilean Atacama Desert with an extensive science program spanning cosmology, Galactic and extragalactic astrophysics, and particle physics. SO will survey the millimeter-wave sky over a wide range of angular scales using six spectral bands across three types of dichroic, polarization-sensitive transition-edge sensor (TES) detector modules: Low-Frequency (LF) modules with bandpasses centered near 30 and 40 GHz, Mid-Frequency (MF) modules near 90 and 150 GHz, and Ultra-High-Frequency (UHF) modules near 220 and 280 GHz. Twenty-five UHF detector modules, each containing 1720 optically-coupled TESs connected to microwave SQUID multiplexing readout, have now been produced. This work summarizes the pre-deployment characterization of these detector modules in laboratory cryostats. Across all UHF modules, we find an average operable TES yield of 83%, equating to over 36,000 devices tested. The distributions of (220, 280) GHz saturation powers have medians of (24, 26) pW, near the centers of their target ranges. For both bands, the median optical efficiency is 0.6, the median effective time constant is 0.4 ms, and the median dark noise-equivalent power (NEP) is ~40 aW/rtHz. The expected photon NEPs at (220, 280) GHz are (64, 99) aW/rtHz, indicating these detectors will achieve background-limited performance on the sky. Thirty-nine UHF and MF detector modules are currently operating in fielded SO instruments, which are transitioning from the commissioning stage to full science observations.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Studies of Detector Yield and Readout Noise From the First Large-Scale Deployment of Microwave Multiplexing at the Large Aperture Telescope

The Simons Observatory is a new ground-based cosmic microwave background experiment, which is currently being commissioned in Chile's Atacama Desert. During its survey, the observatory's small aperture telescopes will map 10% of the sky in bands centered at frequencies ranging from 27 to 280 GHz to constrain cosmic inflation models, and its large aperture telescope will map 40% of the sky in the same bands to constrain cosmological parameters and use weak lensing to study large-scale structure. To achieve these science goals, the Simons Observatory is deploying these telescopes' receivers with 60,000 state-of-the-art superconducting transition-edge sensor bolometers for its first five year survey. Reading out this unprecedented number of cryogenic sensors, however, required the development of a novel readout system. The SMuRF electronics were developed to enable high-density readout of superconducting sensors using cryogenic microwave SQUID multiplexing technology. The commissioning of the SMuRF systems at the Simons Observatory is the largest deployment to date of microwave multiplexing technology for transition-edge sensors. In this paper, we show that a significant fraction of the systems deployed so far to the Simons Observatory's large aperture telescope meet baseline specifications for detector yield and readout noise in this early phase of commissioning.

astro-ph.IM↗

arXiv2024

Simons Observatory: Pre-deployment Performance of a Large Aperture Telescope Optics Tube in the 90 and 150 GHz Spectral Bands

The Simons Observatory will map the temperature and polarization over half of the sky, at millimeter wavelengths in six spectral bands from the Atacama Desert in Chile. These data will provide new insights into the genesis, content, and history of our Universe; the astrophysics of galaxies and galaxy clusters; objects in our solar system; and time-varying astrophysical phenomena. This ambitious new instrument suite, initially comprising three 0.5 m small-aperture telescopes and one 6 m large aperture telescope, is designed using a common combination of new technologies and new implementations to realize an observatory significantly more capable than the previous generation. In this paper, we present the pre-deployment performance of the first mid-frequency "optics tube" which will be fielded on the large aperture telescope with sensitivity to the 90 and 150 GHz spectral bands. This optics tube contains lenses, filters, detectors, and readout components, all of which operate at cryogenic temperatures. It is one of seven that form the core of the large aperture telescope receiver in its initial deployment. We describe this optics tube, including details of comprehensive testing methods, new techniques for beam and passband characterization, and its measured performance. The performance metrics include beams, optical efficiency, passbands, and forecasts for the on-sky performance of the system. We forecast a sensitivity that exceeds the requirements of the large aperture telescope with greater than 30% margin in each spectral band, and predict that the instrument will realize diffraction-limited performance and the expected detector passbands.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Production-level Fabrication of the Mid- and Ultra-High-Frequency Wafers

The Simons Observatory (SO) is a cosmic microwave background instrumentation suite in the Atacama Desert of Chile. More than 65,000 polarization-sensitive transition-edge sensor (TES) bolometers will be fielded in the frequency range spanning 27 to 280 GHz, with three separate dichroic designs. The mid-frequency 90/150 GHz and ultra-high-frequency 220/280 GHz detector arrays, fabricated at NIST, account for 39 of 49 total detector modules and implement the feedhorn-fed orthomode transducer (OMT)-coupled TES bolometer architecture. A robust production-level fabrication framework for these detector arrays and the monolithic DC/RF routing wafers has been developed, which includes single device prototyping, process monitoring techniques, in-process metrology, and cryogenic measurements of critical film properties. Application of this framework has resulted in timely delivery of nearly 100 total superconducting focal plane components to SO with 88% of detector wafers meeting nominal criteria for integration into a detector module: a channel yield > 95% and Tc in the targeted range.

astro-ph.IM↗

arXiv2024

The Simons Observatory: Large-Scale Characterization of 90/150 GHz TES Detector Modules

The Simons Observatory (SO) is a cosmic microwave background instrumentation suite being deployed in the Atacama Desert in northern Chile. The telescopes within SO use three types of dichroic transition-edge sensor (TES) detector arrays, with the 90 and 150 GHz Mid-Frequency (MF) arrays containing 65% of the approximately 68,000 detectors in the first phase of SO. All of the 26 required MF detector arrays have now been fabricated, packaged into detector modules, and tested in laboratory cryostats. Across all modules, we find an average operable detector yield of 84% and median saturation powers of (2.8, 8.0) pW with interquartile ranges of (1, 2) pW at (90, 150) GHz, respectively, falling within their targeted ranges. We measure TES normal resistances and superconducting transition temperatures on each detector wafer to be uniform within 3%, with overall central values of 7.5 mohm and 165 mK, respectively. Results on time constants, optical efficiency, and noise performance are also presented and are consistent with achieving instrument sensitivity forecasts.

astro-ph.IM↗

arXiv2022

Development of the Low Frequency Telescope Focal Plane Detector Modules for LiteBIRD

LiteBIRD is a JAXA-led strategic large-class satellite mission designed to measure the polarization of the cosmic microwave background and Galactic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020s. The scientific payload includes three telescopes which are called the low-, mid-, and high-frequency telescopes each with their own receiver that covers a portion of the mission's frequency range. The low frequency telescope will map synchrotron radiation from the Galactic foreground and the cosmic microwave background. We discuss the design, fabrication, and characterization of the low-frequency focal plane modules for low-frequency telescope, which has a total bandwidth ranging from 34 to 161 GHz. There will be a total of 4 different pixel types with 8 overlapping bands to cover the full frequency range. These modules are housed in a single low-frequency focal plane unit which provides thermal isolation, mechanical support, and radiative baffling for the detectors. The module design implements multi-chroic lenslet-coupled sinuous antenna arrays coupled to transition edge sensor bolometers read out with frequency-domain mulitplexing. While this technology has strong heritage in ground-based cosmic microwave background experiments, the broad frequency coverage, low optical loading conditions, and the high cosmic ray background of the space environment require further development of this technology to be suitable for LiteBIRD. In these proceedings, we discuss the optical and bolometeric characterization of a triplexing prototype pixel with bands centered on 78, 100, and 140 GHz.

astro-ph.IM↗

arXiv2022

Assembly development for the Simons Observatory focal plane readout module

The Simons Observatory (SO) is a suite of instruments sensitive to temperature and polarization of the cosmic microwave background (CMB) to be located at Cerro Toco in the Atacama Desert in Chile. Five telescopes, one large aperture telescope and four small aperture telescopes, will host roughly 70,000 highly multiplexed transition edge sensor (TES) detectors operated at 100 mK. Each SO focal plane module (UFM) couples 1,764 TESes to microwave resonators in a microwave multiplexing (uMux) readout circuit. Before detector integration, the 100 mK uMux components are packaged into multiplexing modules (UMMs), which are independently validated to ensure they meet SO performance specifications. Here we present the assembly developments of these UMM readout packages for mid frequency (90/150 GHz) and ultra high frequency (220/280 GHz) UFMs.

astro-ph.IM↗

arXiv2021

The Simons Observatory microwave SQUID multiplexing detector module design

Advances in cosmic microwave background (CMB) science depend on increasing the number of sensitive detectors observing the sky. New instruments deploy large arrays of superconducting transition-edge sensor (TES) bolometers tiled densely into ever larger focal planes. High multiplexing factors reduce the thermal loading on the cryogenic receivers and simplify their design. We present the design of focal-plane modules with an order of magnitude higher multiplexing factor than has previously been achieved with TES bolometers. We focus on the novel cold readout component, which employs microwave SQUID multiplexing ($μ$mux). Simons Observatory will use 49 modules containing 60,000 bolometers to make exquisitely sensitive measurements of the CMB. We validate the focal-plane module design, presenting measurements of the readout component with and without a prototype detector array of 1728 polarization-sensitive bolometers coupled to feedhorns. The readout component achieves a $95\%$ yield and a 910 multiplexing factor. The median white noise of each readout channel is 65 $\mathrm{pA/\sqrt{Hz}}$. This impacts the projected SO mapping speed by $< 8\%$, which is less than is assumed in the sensitivity projections. The results validate the full functionality of the module. We discuss the measured performance in the context of SO science requirements, which are exceeded.

astro-ph.IM↗

arXiv2021

The Simons Observatory: the Large Aperture Telescope (LAT)

The Simons Observatory (SO) is a Cosmic Microwave Background (CMB) experiment to observe the microwave sky in six frequency bands from 30GHz to 290GHz. The Observatory -- at $\sim$5200m altitude -- comprises three Small Aperture Telescopes (SATs) and one Large Aperture Telescope (LAT) at the Atacama Desert, Chile. This research note describes the design and current status of the LAT along with its future timeline.

astro-ph.IM↗

arXiv2020

Comparing complex impedance and bias step measurements of Simons Observatory transition edge sensors

The Simons Observatory (SO) will perform ground-based observations of the cosmic microwave background (CMB) with several small and large aperture telescopes, each outfitted with thousands to tens of thousands of superconducting aluminum manganese (AlMn) transition-edge sensor bolometers (TESs). In-situ characterization of TES responsivities and effective time constants will be required multiple times each observing-day for calibrating time-streams during CMB map-making. Effective time constants are typically estimated in the field by briefly applying small amplitude square-waves on top of the TES DC biases, and fitting exponential decays in the bolometer response. These so-called "bias step" measurements can be rapidly implemented across entire arrays and therefore are attractive because they take up little observing time. However, individual detector complex impedance measurements, while too slow to implement during observations, can provide a fuller picture of the TES model and a better understanding of its temporal response. Here, we present the results of dark TES characterization of many prototype SO bolometers and compare the effective thermal time constants measured via bias steps to those derived from complex impedance data.

astro-ph.IM↗