arXiv subjects

Michael Manfra

Publications and source records attributed to Michael Manfra.

11 recordsLinked to original sources

arXiv2026

20 Second Parity Lifetime in an InAs--Pb Tetron Device

A central promise of topological quantum computing is that increasing the excitation gap improves device performance significantly. Here, we experimentally validate this principle in an InAs--Pb tetron device via interferometric single-shot parity measurements. By replacing aluminum with the higher-gap superconductor lead in our superconductor-semiconductor hybrid devices, we have improved the robustness of our topological phase. In addition, to enable fast and precise bring-up at scale, we have developed an rf measurement technique that resolves low-energy wire-end states and directly measures their energy splitting with $\mu\text{eV}$ precision. We employ this technique to bring up a device in a multi-tetron array and perform parity measurements of one of the tetron's hybrid nanowires (NWs). By controllably switching the wire parity, we observe $h/2e$-periodic bimodal shifts in the quantum capacitance of a quantum dot coupled to the hybrid nanowire in an interference loop. Further time-resolved measurements reveal a characteristic parity switching time of $\sim 20$ s with some instances reaching minute-scale. Such extremely long parity lifetimes are orders of magnitude longer than typical qubit operation times, which are on the order of $\mu\text{s}$. Finally, we discuss potential implications for the fidelity of Pauli measurements.

cond-mat.mes-hall↗

arXiv2025

Topological Robustness of Anyon Tunneling at $\nu = 1/3$

The scaling exponent $g$ of the quasiparticle propagator for incompressible fractional quantum Hall states in the Laughlin sequence is expected to be robust against perturbations that do not close the gap. Here we probe the topological robustness of the chiral Luttinger liquid at the boundary of the $\nu=1/3$ state by measuring the tunneling conductance between counterpropagating edge modes as a function of quantum point contact transmission. We demonstrate that for transmission $t\geq 0.7$ the tunneling conductance is well-described by the first two terms of a perturbative series expansion corresponding to $g=1/3$. We further demonstrate that the measured scaling exponent is robustly pinned to $g=1/3$ across the plateau, only deviating as the bulk state becomes compressible. Finally we examine the impact of weak disorder on the scaling exponent, finding it insensitive. These measurements firmly establish the topological robustness of anyon tunneling at $\nu=1/3$ and substantiate the chiral Luttinger liquid description of the edge mode.

cond-mat.mes-hall↗

arXiv2025

Response to recent comments on Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supp. Info. for Nature 638, 651-655 (2025)

The topological gap protocol (TGP) is a statistical test designed to identify a topological phase with high confidence and without human bias. It is used to determine a promising parameter regime for operating topological qubits. The protocol's key metric is the probability of incorrectly identifying a trivial region as topological, referred to as the false discovery rate (FDR). Two recent manuscripts [arXiv:2502.19560, arXiv:2503.08944] engage with the topological gap protocol and its use in Phys. Rev. B 107, 245423 (2023) and Subsection S4.3 of the Supplementary Information for Nature 638, 651-655 (2025), although they do not explicitly dispute the main results of either one. We demonstrate that the objections in arXiv:2502.19560 and arXiv:2503.08944 are unfounded, and we uphold the conclusions of Phys. Rev. B 107, 245423 (2023) and Nature 638, 651-655 (2025). Specifically, we show that no flaws have been identified in our estimate of the false discovery rate (FDR). We provide a point-by-point rebuttal of the comments in arXiv:2502.19560 and arXiv:2503.08944.

cond-mat.mes-hall↗

arXiv2025

Universal Anyon Tunneling in a Chiral Luttinger Liquid

The edge modes of fractional quantum Hall liquids are described by chiral Luttinger liquid theory. Despite many years of experimental investigation fractional quantum Hall edge modes remain enigmatic with significant discrepancies between experimental observations and detailed predictions of chiral Luttinger liquid theory. Here we report measurements of tunneling conductance between counterpropagating edge modes at $\nu=1/3$ across a quantum point contact fabricated on an AlGaAs/GaAs heterostructure designed to promote a sharp confinement potential. We present evidence for tunneling of anyons through a $\nu=1/3$ incompressible liquid that exhibits universal scaling behavior with respect to temperature, source-drain bias, and barrier transmission, as originally proposed by Wen [1, 2]. For transmission $t\geq0.800$, we measured the tunneling exponent $\bar{g} = 0.333 \pm 0.005$ averaged over 29 independent data sets, consistent with the scaling dimension $\Delta = g/2 = 1/6$ for a Laughlin quasiparticle at the edge. When combined with measurements of the fractional charge $e^*=e/3$ and the recently observed anyonic statistical angle $\theta_a=\frac{2\pi}{3}$, the measured tunneling exponent fully characterizes the topological order of the primary Laughlin state at $\nu=1/3$.

cond-mat.mes-hall↗

arXiv2025

Roadmap to fault tolerant quantum computation using topological qubit arrays

We describe a concrete device roadmap towards a fault-tolerant quantum computing architecture based on noise-resilient, topologically protected Majorana-based qubits. Our roadmap encompasses four generations of devices: a single-qubit device that enables a measurement-based qubit benchmarking protocol; a two-qubit device that uses measurement-based braiding to perform single-qubit Clifford operations; an eight-qubit device that can be used to show an improvement of a two-qubit operation when performed on logical qubits rather than directly on physical qubits; and a topological qubit array supporting lattice surgery demonstrations on two logical qubits. Devices that enable this path require a superconductor-semiconductor heterostructure that supports a topological phase, quantum dots and coupling between those quantum dots that can create the appropriate loops for interferometric measurements, and a microwave readout system that can perform fast, low-error single-shot measurements. We describe the key design components of these qubit devices, along with the associated protocols for demonstrations of single-qubit benchmarking, Clifford gate execution, quantum error detection, and quantum error correction, which differ greatly from those in more conventional qubits. Finally, we comment on implications and advantages of this architecture for utility-scale quantum computation.

quant-ph↗

arXiv2024

Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device

The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $\mu$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $\mu$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%.

cond-mat.mes-hall↗

arXiv2022

InAs-Al Hybrid Devices Passing the Topological Gap Protocol

We present measurements and simulations of semiconductor-superconductor heterostructure devices that are consistent with the observation of topological superconductivity and Majorana zero modes. The devices are fabricated from high-mobility two-dimensional electron gases in which quasi-one-dimensional wires are defined by electrostatic gates. These devices enable measurements of local and non-local transport properties and have been optimized via extensive simulations to ensure robustness against non-uniformity and disorder. Our main result is that several devices, fabricated according to the design's engineering specifications, have passed the topological gap protocol defined in Pikulin et al. [arXiv:2103.12217]. This protocol is a stringent test composed of a sequence of three-terminal local and non-local transport measurements performed while varying the magnetic field, semiconductor electron density, and junction transparencies. Passing the protocol indicates a high probability of detection of a topological phase hosting Majorana zero modes as determined by large-scale disorder simulations. Our experimental results are consistent with a quantum phase transition into a topological superconducting phase that extends over several hundred millitesla in magnetic field and several millivolts in gate voltage, corresponding to approximately one hundred micro-electron-volts in Zeeman energy and chemical potential in the semiconducting wire. These regions feature a closing and re-opening of the bulk gap, with simultaneous zero-bias conductance peaks at both ends of the devices that withstand changes in the junction transparencies. The extracted maximum topological gaps in our devices are 20-60 $\mu$eV. This demonstration is a prerequisite for experiments involving fusion and braiding of Majorana zero modes.

cond-mat.mes-hall↗

arXiv2021

Entropy measurement of a strongly coupled quantum dot

The spin 1/2 entropy of electrons trapped in a quantum dot has previously been measured with great accuracy, but the protocol used for that measurement is valid only within a restrictive set of conditions. Here, we demonstrate a novel entropy measurement protocol that is universal for arbitrary mesoscopic circuits and apply this new approach to measure the entropy of a quantum dot hybridized with a reservoir, where Kondo correlations dominate spin physics. The experimental results match closely to numerical renormalization group (NRG) calculations for small and intermediate coupling. For the largest couplings investigated in this work, NRG predicts a suppression of spin entropy at the charge transition due to the formation of a Kondo singlet, but that suppression is not observed in the experiment.

cond-mat.mes-hall↗

arXiv2021

A robust protocol for entropy measurement in mesoscopic circuits

Previous measurements utilizing Maxwell relations to measure change in entropy, $S$, demonstrated remarkable accuracy of measuring the spin-1/2 entropy of electrons in a weakly coupled quantum dot. However, these previous measurements relied upon prior knowledge of the charge transition lineshape. This had the benefit of making the determination of entropy independent of measurement scaling, but at the cost of limiting the applicability of the approach to relatively simple systems. To measure entropy of more exotic mesoscopic systems, a new analysis technique can be employed; however, doing so requires precise knowledge of the measurement scaling. Here, we give details on the necessary improvements made to the original experimental approach and highlight some of the common challenges (along with strategies to overcome them) that other groups may face when attempting this type of measurement.

cond-mat.mes-hall↗

arXiv2019

Direct Entropy Measurement in a Mesoscopic Quantum System

The entropy of an electronic system offers important insights into the nature of its quantum mechanical ground state. This is particularly valuable in cases where the state is difficult to identify by conventional experimental probes, such as conductance. Traditionally, entropy measurements are based on bulk properties, such as heat capacity, that are easily observed in macroscopic samples but are unmeasurably small in systems that consist of only a few particles. In this work, we develop a mesoscopic circuit to directly measure the entropy of just a few electrons, and demonstrate its efficacy using the well understood spin statistics of the first, second, and third electron ground states in a GaAs quantum dot. The precision of this technique, quantifying the entropy of a single spin-$\frac{1}{2}$ to within 5\% of the expected value of $k_B \ln{2}$, shows its potential for probing more exotic systems. For example, entangled states or those with non-Abelian statistics could be clearly distinguished by their low-temperature entropy.

cond-mat.mes-hall↗

arXiv2016

In-surface confinement of topological insulator nanowire surface states

The bandstructures of [110] and [001] Bi2Te3 nanowires are solved with the atomistic 20 band tight binding functionality of NEMO5. The theoretical results reveal: The popular assumption that all topological insulator wire surfaces are equivalent is inappropriate. The Fermi velocity of chemically distinct wire surfaces differs significantly which creates an effective in-surface confinement potential. As a result, topological insulator surface states prefer specific surfaces. Therefore, experiments have to be designed carefully not to probe surfaces unfavorable to the surface states (low density of states) and thereby be insensitive to the TI-effects.

cond-mat.mtrl-sci↗