arXiv subjects

Michael Munz

Publications and source records attributed to Michael Munz.

10 recordsLinked to original sources

arXiv2026

Representing and Detecting Label Ambiguity in IMU-Based Exercise Evaluation

Home-based physiotherapy is performed without supervision, which leads to incorrect execution and motivates systems that assess movement automatically from inertial measurement units (IMUs). Such systems assign each repetition to a category, yet a relevant share of repetitions falls near a class boundary, where even trained raters disagree. Classifiers trained with one-hot labels collapse these borderline repetitions onto a single class and discard this ambiguity. We address this with a method that automatically generates a label distribution per repetition without a large rater pool. We train a network to reproduce the full distribution with a Kullback-Leibler objective, the ambiguity approach, and compare it against a one-hot cross-entropy baseline on four IMU exercise datasets. From the network output we further determine whether a repetition is ambiguous and which classes are relevant to it. The ambiguity approach matched or exceeded the baseline classification on all four datasets, and detected ambiguity and the relevant classes more reliably. Representing the label distribution in the training target therefore adds information about ambiguity at no cost to classification.

cs.LG↗

arXiv2026

Do We Really Need Diffusion? A Fast U-Net for Paired Medical Image Translation

Magnetic resonance imaging-signal fat fraction (MRI-SFF) quantifies tissue fat and serves as an established biomarker for metabolic and musculoskeletal disorders. The acquisition requires, however, specialized MRI sequences, which are not available routinely. We investigate whether SFF can be estimated from widely available T2-weighted (T2w) MRI via image-to-image translation (I2I). We further compare a lightweight 4-level U-Net to a state-of-the-art Denoising Diffusion Probabilistic Model (DDPM) using a dataset of 230 048 paired 2D images (183 517 train, 23 621 val, 22 910 test) from the German National Cohort (NAKO). Both models clearly outperform the identity baseline (Pearson correlation r = 0.769, mean absolute error MAE = 0.070 +/- 0.054), which confirms that the models learn a non-trivial cross-modal mapping. Interestingly, the lightweight U-Net outperforms the DDPM in both correlation (r = 0.975 vs. 0.962) and error (MAE = 0.014 +/- 0.015 vs. 0.019 +/- 0.019), while reducing inference time by a factor of 208 (25.2 ms vs. 5 227.2 ms per image using 50 Denoising Diffusion Implicit Model (DDIM) steps). The strong clinical performance at substantially reduced computational cost enables real-time clinical use.

cs.CV↗

arXiv2025

Sawtooth Sampling for Time Series Denoising Diffusion Implicit Models

Denoising Diffusion Probabilistic Models (DDPMs) can generate synthetic timeseries data to help improve the performance of a classifier, but their sampling process is computationally expensive. We address this by combining implicit diffusion models with a novel Sawtooth Sampler that accelerates the reverse process and can be applied to any pretrained diffusion model. Our approach achieves a 30 times speed-up over the standard baseline while also enhancing the quality of the generated sequences for classification tasks.

cs.LG↗

arXiv2025

GAITEX: Human motion dataset of impaired gait and rehabilitation exercises using inertial and optical sensors

Wearable inertial measurement units (IMUs) provide a cost-effective approach to assessing human movement in clinical and everyday environments. However, developing the associated classification models for robust assessment of physiotherapeutic exercise and gait analysis requires large, diverse datasets that are costly and time-consuming to collect. We present a multimodal dataset of physiotherapeutic and gait-related exercises, including correct and clinically relevant variants, recorded from 19 healthy subjects using synchronized IMUs and optical marker-based motion capture (MoCap). It contains data from nine IMUs and 68 markers tracking full-body kinematics. Four markers per IMU allow direct comparison between IMU- and MoCap-derived orientations. We additionally provide processed IMU orientations aligned to common segment coordinate systems, subject-specific OpenSim models, inverse kinematics outputs, and visualization tools for IMU-derived orientations. The dataset is fully annotated with movement quality ratings and timestamped segmentations. It supports various machine learning tasks such as exercise evaluation, gait classification, temporal segmentation, and biomechanical parameter estimation. Code for postprocessing, alignment, inverse kinematics, and technical validation is provided to promote reproducibility.

cs.CV↗

arXiv2025

Boosting Automatic Exercise Evaluation Through Musculoskeletal Simulation-Based IMU Data Augmentation

Automated evaluation of movement quality can enhance physiotherapeutic treatment and sports training by providing objective, real-time feedback. However, deep learning models that assess movements captured by inertial measurement units (IMUs) are often limited by data scarcity, class imbalance, and label ambiguity. We present a data augmentation method that generates IMU data using musculoskeletal simulations integrated with systematic modifications of movement trajectories. The approach enforces anatomically plausible kinematic constraints and enables automatic labeling by combining inverse kinematic parameters with a knowledge-based evaluation strategy. Across four datasets of varying complexity, augmented variants closely resemble real-world data and contribute to gains in classification accuracy, generalization to unseen subjects, and patient-specific fine-tuning from few examples. The magnitude of these gains varies with dataset properties, in particular class balance and label ambiguity. These findings indicate that musculoskeletal simulation-based augmentation can address common challenges faced by deep learning applications in physiotherapeutic exercise evaluation.

cs.LG↗

arXiv2025

Time Series Similarity Score Functions to Monitor and Interact with the Training and Denoising Process of a Time Series Diffusion Model applied to a Human Activity Recognition Dataset based on IMUs

Denoising diffusion probabilistic models are able to generate synthetic sensor signals. The training process of such a model is controlled by a loss function which measures the difference between the noise that was added in the forward process and the noise that was predicted by the diffusion model. This enables the generation of realistic data. However, the randomness within the process and the loss function itself makes it difficult to estimate the quality of the data. Therefore, we examine multiple similarity metrics and adapt an existing metric to overcome this issue by monitoring the training and synthetisation process using those metrics. The adapted metric can even be fine-tuned on the input data to comply with the requirements of an underlying classification task. We were able to significantly reduce the amount of training epochs without a performance reduction in the classification task. An optimized training process not only saves resources, but also reduces the time for training generative models.

cs.LG↗

arXiv2024

IMUDiffusion: A Diffusion Model for Multivariate Time Series Synthetisation for Inertial Motion Capturing Systems

Kinematic sensors are often used to analyze movement behaviors in sports and daily activities due to their ease of use and lack of spatial restrictions, unlike video-based motion capturing systems. Still, the generation, and especially the labeling of motion data for specific activities can be time-consuming and costly. Additionally, many models struggle with limited data, which limits their performance in recognizing complex movement patterns. To address those issues, generating synthetic data can help expand the diversity and variability. In this work, we propose IMUDiffusion, a probabilistic diffusion model specifically designed for multivariate time series generation. Our approach enables the generation of high-quality time series sequences which accurately capture the dynamics of human activities. Moreover, by joining our dataset with synthetic data, we achieve a significant improvement in the performance of our baseline human activity classifier. In some cases, we are able to improve the macro F1-score by almost 30%. IMUDiffusion provides a valuable tool for generating realistic human activity movements and enhance the robustness of models in scenarios with limited training data.

cs.LG↗

arXiv2023

Transformer-Based UNet with Multi-Headed Cross-Attention Skip Connections to Eliminate Artifacts in Scanned Documents

The extraction of text in high quality is essential for text-based document analysis tasks like Document Classification or Named Entity Recognition. Unfortunately, this is not always ensured, as poor scan quality and the resulting artifacts lead to errors in the Optical Character Recognition (OCR) process. Current approaches using Convolutional Neural Networks show promising results for background removal tasks but fail correcting artifacts like pixelation or compression errors. For general images, Transformer backbones are getting integrated more frequently in well-known neural network structures for denoising tasks. In this work, a modified UNet structure using a Swin Transformer backbone is presented to remove typical artifacts in scanned documents. Multi-headed cross-attention skip connections are used to more selectively learn features in respective levels of abstraction. The performance of this approach is examined regarding compression errors, pixelation and random noise. An improvement in text extraction quality with a reduced error rate of up to 53.9% on the synthetic data is archived. The pretrained base-model can be easily adapted to new artifacts. The cross-attention skip connections allow to integrate textual information extracted from the encoder or in form of commands to more selectively control the models outcome. The latter is shown by means of an example application.

cs.CV↗

arXiv2021

Novel Approach To Synchronisation Of Wearable IMUs Based On Magnetometers

Synchronisation of wireless inertial measurement units in human movement analysis is often achieved using event-based synchronisation techniques. However, these techniques lack precise event generation and accuracy. An inaccurate synchronisation could lead to large errors in motion estimation and reconstruction and therefore wrong analysis outputs. We propose a novel event-based synchronisation technique based on a magnetic field, which allows sub-sample accuracy. A setup featuring Shimmer3 inertial measurement units is designed to test the approach. The proposed technique shows to be able to synchronise with a maximum offset of below 2.6~ms with sensors measuring at 100~Hz. Also, the results indicate a reliable event generation and detection. The investigated parameters suggest a required synchronisation time of eight seconds. Further research should investigate the temperature changes that the sensors are exposed to during human motion analysis and their influence on the internal time measurement of the sensors. In addition, the approach should be tested using inertial measurement units from different manufacturers to investigate an identified constant offset in the accuracy measurements.

eess.SY↗

arXiv2020

Analysis of Gait-Event-related Brain Potentials During Instructed And Spontaneous Treadmill Walking -- Technical Affordances and used Methods

To improve the understanding of human gait and to facilitate novel developments in gait rehabilitation, the neural correlates of human gait as measured by means of non-invasive electroencephalography (EEG) have been investigated recently. Particularly, gait-related event-related brain potentials (gERPs) may provide information about the functional role of cortical brain regions in human gait control. The purpose of this paper is to explore possible experimental and technical solutions for time-sensitive analysis of human gait-related ERPs during spontaneous and instructed treadmill walking. A solution (HW/SW) for synchronous recording of gait- and EEG data was developed, tested and piloted. The solution consists of a custom-made USB synchronization interface, a time-synchronization module and a data merging module, allowing temporal synchronization of recording devices for time-sensitive extraction of gait markers for analysis of gait-related ERPs and for the training of artificial neural networks. In the present manuscript, the hardware and software components were tested with the following devices: A treadmill with an integrated pressure plate for gait analysis (zebris FDM-T) and an Acticap non-wireless 32-channel EEG-system (Brain Products GmbH). The usability and validity of the developed solution was tested in a pilot study (n = 3 healthy participants, n=3 females, mean age = 22.75 years). Recorded EEG data was segmented and analyzed according to the detected gait markers for the analysis of gait-related ERPs. Finally, EEG periods were used to train a deep learning artificial neural network as classifier of gait phases. The results obtained in this pilot study, although preliminary, support the feasibility of the solution for the application of gait-related EEG analysis..

q-bio.NC↗