arXiv subjects

Michael Niemier

Publications and source records attributed to Michael Niemier.

At least 19 recordsLinked to original sources

arXiv2026

VIPER: Architecture-Aware Performance Modeling for Processing-in-Memory Design-Space Exploration

Processing-in-Memory (PIM) promises to reduce data movement overhead by executing computation in or near memory, but its realized application speedup remains highly design-dependent. Non-offloadable host execution, host-PIM transfers, limited PIM capacity, and device programming latency can limit end-to-end speedup, making fast early-stage design-space exploration (DSE) essential. However, existing PIM evaluation methods remain limited: circuit- and device-level tools cannot capture these end-to-end PIM performance factors, while cycle-accurate simulation is too slow for iterative DSE. To address this gap, we present VIPER, a unified, lightweight, and architecture-aware performance evaluation framework for PIM DSE. VIPER profiles host execution once and combines the measured host behavior with a PIM-aware analytical engine that sweeps PIM-side parameters across candidate designs. It supports both Processing Near Memory (PNM) and Processing Using Memory (PUM) under task-offloading and data-triggered execution by capturing host-PIM transfer, array access, in-memory computation, device programming latency, and capacity-induced partitioning, providing rapid architecture-aware performance estimates for iterative DSE without repeated cycle-accurate simulation. We validate VIPER against a commercial UPMEM system and more than 400 cycle-accurate gem5 configurations. VIPER predicts the UPMEM offloading decision and break-even region a priori, and, with a refined transfer model, captures the measured peak-and-rolloff behavior with 12\% mean speedup error across the DPU sweep (6\% up to the 256-DPU peak). Against gem5, VIPER achieves less than 10\% error while reducing evaluation time from hours to under one minute. Case studies of UPMEM, ReRAM/FeFET crossbars, and IMCRYPTO show that architecture-aware DSE reveals key performance trade-offs that device-level evaluation misses.

cs.AR↗

arXiv2026

A 185 TOPS/W/mm2 Bayesian Inference Engine with 640 aJ Write-Free FeFET GRNG for Uncertainty-Aware Aerial Search and Rescue

Aerial search and rescue missions require fast and reliable victim detection under uncertain and rapidly changing environments. Deterministic deep learning models can produce overconfident false positives, forcing unmanned aircraft systems to perform costly verification maneuvers that reduce search coverage and increase rescue delay. Bayesian neural networks provide uncertainty-aware detection, but their sampling overhead is challenging for battery-constrained edge platforms. This work presents a FeFET-based Bayesian inference engine with a write-free central limit theorem Gaussian random number generator embedded in a compute-in-memory macro. By summing currents from a randomly selected subset of minimum-sized, programmed-once FeFETs, the proposed architecture eliminates energy- and endurance-intensive write operations during inference while maintaining scalable Gaussian sampling. The CLT-GRNG consumes 640 aJ per sample, providing a 560x energy-efficiency improvement over prior BNN accelerators, while the CIM tile achieves 185 TOPS/W/mm2. Evaluated on aerial search and rescue detection, the Bayesian model improves uncertainty calibration and robustness under environmental corruption, reducing risk and enabling low-confidence detections to be filtered before costly verification. These results demonstrate an energy-efficient and uncertainty-aware edge AI engine for autonomous search and rescue systems.

cs.AR↗

arXiv2025

Cell Instance Segmentation: The Devil Is in the Boundaries

State-of-the-art (SOTA) methods for cell instance segmentation are based on deep learning (DL) semantic segmentation approaches, focusing on distinguishing foreground pixels from background pixels. In order to identify cell instances from foreground pixels (e.g., pixel clustering), most methods decompose instance information into pixel-wise objectives, such as distances to foreground-background boundaries (distance maps), heat gradients with the center point as heat source (heat diffusion maps), and distances from the center point to foreground-background boundaries with fixed angles (star-shaped polygons). However, pixel-wise objectives may lose significant geometric properties of the cell instances, such as shape, curvature, and convexity, which require a collection of pixels to represent. To address this challenge, we present a novel pixel clustering method, called Ceb (for Cell boundaries), to leverage cell boundary features and labels to divide foreground pixels into cell instances. Starting with probability maps generated from semantic segmentation, Ceb first extracts potential foreground-foreground boundaries with a revised Watershed algorithm. For each boundary candidate, a boundary feature representation (called boundary signature) is constructed by sampling pixels from the current foreground-foreground boundary as well as the neighboring background-foreground boundaries. Next, a boundary classifier is used to predict its binary boundary label based on the corresponding boundary signature. Finally, cell instances are obtained by dividing or merging neighboring regions based on the predicted boundary labels. Extensive experiments on six datasets demonstrate that Ceb outperforms existing pixel clustering methods on semantic segmentation probability maps. Moreover, Ceb achieves highly competitive performance compared to SOTA cell instance segmentation methods.

cs.CV↗

arXiv2025

Efficient approximation of Earth Mover's Distance Based on Nearest Neighbor Search

Earth Mover's Distance (EMD) is an important similarity measure between two distributions, used in computer vision and many other application domains. However, its exact calculation is computationally and memory intensive, which hinders its scalability and applicability for large-scale problems. Various approximate EMD algorithms have been proposed to reduce computational costs, but they suffer lower accuracy and may require additional memory usage or manual parameter tuning. In this paper, we present a novel approach, NNS-EMD, to approximate EMD using Nearest Neighbor Search (NNS), in order to achieve high accuracy, low time complexity, and high memory efficiency. The NNS operation reduces the number of data points compared in each NNS iteration and offers opportunities for parallel processing. We further accelerate NNS-EMD via vectorization on GPU, which is especially beneficial for large datasets. We compare NNS-EMD with both the exact EMD and state-of-the-art approximate EMD algorithms on image classification and retrieval tasks. We also apply NNS-EMD to calculate transport mapping and realize color transfer between images. NNS-EMD can be 44x to 135x faster than the exact EMD implementation, and achieves superior accuracy, speedup, and memory efficiency over existing approximate EMD methods.

cs.CV↗

arXiv2025

Shared-PIM: Enabling Concurrent Computation and Data Flow for Faster Processing-in-DRAM

Processing-in-Memory (PIM) enhances memory with computational capabilities, potentially solving energy and latency issues associated with data transfer between memory and processors. However, managing concurrent computation and data flow within the PIM architecture incurs significant latency and energy penalty for applications. This paper introduces Shared-PIM, an architecture for in-DRAM PIM that strategically allocates rows in memory banks, bolstered by memory peripherals, for concurrent processing and data movement. Shared-PIM enables simultaneous computation and data transfer within a memory bank. When compared to LISA, a state-of-the-art architecture that facilitates data transfers for in-DRAM PIM, Shared-PIM reduces data movement latency and energy by 5x and 1.2x respectively. Furthermore, when integrated to a state-of-the-art (SOTA) in-DRAM PIM architecture (pLUTo), Shared-PIM achieves 1.4x faster addition and multiplication, and thereby improves the performance of matrix multiplication (MM) tasks by 40%, polynomial multiplication (PMM) by 44%, and numeric number transfer (NTT) tasks by 31%. Moreover, for graph processing tasks like Breadth-First Search (BFS) and Depth-First Search (DFS), Shared-PIM achieves a 29% improvement in speed, all with an area overhead of just 7.16% compared to the baseline pLUTo.

cs.AR↗

arXiv2025

TAP-CAM: A Tunable Approximate Matching Engine based on Ferroelectric Content Addressable Memory

Pattern search is crucial in numerous analytic applications for retrieving data entries akin to the query. Content Addressable Memories (CAMs), an in-memory computing fabric, directly compare input queries with stored entries through embedded comparison logic, facilitating fast parallel pattern search in memory. While conventional CAM designs offer exact match functionality, they are inadequate for meeting the approximate search needs of emerging data-intensive applications. Some recent CAM designs propose approximate matching functions, but they face limitations such as excessively large cell area or the inability to precisely control the degree of approximation. In this paper, we propose TAP-CAM, a novel ferroelectric field effect transistor (FeFET) based ternary CAM (TCAM) capable of both exact and tunable approximate matching. TAP-CAM employs a compact 2FeFET-2R cell structure as the entry storage unit, and similarities in Hamming distances between input queries and stored entries are measured using an evaluation transistor associated with the matchline of CAM array. The operation, robustness and performance of the proposed design at array level have been discussed and evaluated, respectively. We conduct a case study of K-nearest neighbor (KNN) search to benchmark the proposed TAP-CAM at application level. Results demonstrate that compared to 16T CMOS CAM with exact match functionality, TAP-CAM achieves a 16.95x energy improvement, along with a 3.06% accuracy enhancement. Compared to 2FeFET TCAM with approximate match functionality, TAP-CAM achieves a 6.78x energy improvement.

cs.ET↗

arXiv2025

A 65 nm Bayesian Neural Network Accelerator with 360 fJ/Sample In-Word GRNG for AI Uncertainty Estimation

Uncertainty estimation is an indispensable capability for AI-enabled, safety-critical applications, e.g. autonomous vehicles or medical diagnosis. Bayesian neural networks (BNNs) use Bayesian statistics to provide both classification predictions and uncertainty estimation, but they suffer from high computational overhead associated with random number generation and repeated sample iterations. Furthermore, BNNs are not immediately amenable to acceleration through compute-in-memory architectures due to the frequent memory writes necessary after each RNG operation. To address these challenges, we present an ASIC that integrates 360 fJ/Sample Gaussian RNG directly into the SRAM memory words. This integration reduces RNG overhead and enables fully-parallel compute-in-memory operations for BNNs. The prototype chip achieves 5.12 GSa/s RNG throughput and 102 GOp/s neural network throughput while occupying 0.45 mm2, bringing AI uncertainty estimation to edge computation.

cs.AR↗

arXiv2024

A Remedy to Compute-in-Memory with Dynamic Random Access Memory: 1FeFET-1C Technology for Neuro-Symbolic AI

Neuro-symbolic artificial intelligence (AI) excels at learning from noisy and generalized patterns, conducting logical inferences, and providing interpretable reasoning. Comprising a 'neuro' component for feature extraction and a 'symbolic' component for decision-making, neuro-symbolic AI has yet to fully benefit from efficient hardware accelerators. Additionally, current hardware struggles to accommodate applications requiring dynamic resource allocation between these two components. To address these challenges-and mitigate the typical data-transfer bottleneck of classical Von Neumann architectures-we propose a ferroelectric charge-domain compute-in-memory (CiM) array as the foundational processing element for neuro-symbolic AI. This array seamlessly handles both the critical multiply-accumulate (MAC) operations of the 'neuro' workload and the parallel associative search operations of the 'symbolic' workload. To enable this approach, we introduce an innovative 1FeFET-1C cell, combining a ferroelectric field-effect transistor (FeFET) with a capacitor. This design, overcomes the destructive sensing limitations of DRAM in CiM applications, while capable of capitalizing decades of DRAM expertise with a similar cell structure as DRAM, achieves high immunity against FeFET variation-crucial for neuro-symbolic AI-and demonstrates superior energy efficiency. The functionalities of our design have been successfully validated through SPICE simulations and prototype fabrication and testing. Our hardware platform has been benchmarked in executing typical neuro-symbolic AI reasoning tasks, showing over 2x improvement in latency and 1000x improvement in energy efficiency compared to GPU-based implementations.

cs.ET↗

arXiv2024

Secure Scattered Memory: Rethinking Secure Enclave Memory with Secret Sharing

The rise of cloud computing demands secure memory systems that ensure data confidentiality, integrity, and freshness against replay attacks. Existing schemes such as AES-XTS, AES-GCM, and AES-CTR each trade performance for security, with only AES-CTR plus Message Authentication Codes (MAC) and Merkle Trees (MT) providing full protection - at the cost of substantial counter and MT overhead. This paper introduces Secure Scattered Memory (SSM), a novel scheme that replaces counter-based encryption with polynomial-based secret sharing. Each data block is encoded into multiple cryptographically independent shares distributed across memory, inherently preventing information leakage while ensuring integrity and freshness through mathematical reconstruction properties. Implemented and synthesized in a 28 nm commercial PDK, SSM occupies 0.27 mm^2 and consumes 284.53 mW. Experiments show only 10% and 8% performance overhead over AES-XTS and AES-GCM, respectively, while outperforming Morphable Counter (MICRO 2018) by up to 40%, achieving 12% better performance than EMCC/RMCC (MICRO 2022), and exceeding COSMOS (MICRO 2025) by 3%.

cs.CR↗

arXiv2023

Privacy Preserving In-memory Computing Engine

Privacy has rapidly become a major concern/design consideration. Homomorphic Encryption (HE) and Garbled Circuits (GC) are privacy-preserving techniques that support computations on encrypted data. HE and GC can complement each other, as HE is more efficient for linear operations, while GC is more effective for non-linear operations. Together, they enable complex computing tasks, such as machine learning, to be performed exactly on ciphertexts. However, HE and GC introduce two major bottlenecks: an elevated computational overhead and high data transfer costs. This paper presents PPIMCE, an in-memory computing (IMC) fabric designed to mitigate both computational overhead and data transfer issues. Through the use of multiple IMC cores for high parallelism, and by leveraging in-SRAM IMC for data management, PPIMCE offers a compact, energy-efficient solution for accelerating HE and GC. PPIMCE achieves a 107X speedup against a CPU implementation of GC. Additionally, PPIMCE achieves a 1,500X and 800X speedup compared to CPU and GPU implementations of CKKS-based HE multiplications. For privacy-preserving machine learning inference, PPIMCE attains a 1,000X speedup compared to CPU and a 12X speedup against CraterLake, the state-of-art privacy preserving computation accelerator.

cs.CR↗

arXiv2023

Accelerating Polynomial Modular Multiplication with Crossbar-Based Compute-in-Memory

Lattice-based cryptographic algorithms built on ring learning with error theory are gaining importance due to their potential for providing post-quantum security. However, these algorithms involve complex polynomial operations, such as polynomial modular multiplication (PMM), which is the most time-consuming part of these algorithms. Accelerating PMM is crucial to make lattice-based cryptographic algorithms widely adopted by more applications. This work introduces a novel high-throughput and compact PMM accelerator, X-Poly, based on the crossbar (XB)-type compute-in-memory (CIM). We identify the most appropriate PMM algorithm for XB-CIM. We then propose a novel bit-mapping technique to reduce the area and energy of the XB-CIM fabric, and conduct processing engine (PE)-level optimization to increase memory utilization and support different problem sizes with a fixed number of XB arrays. X-Poly design achieves 3.1X10^6 PMM operations/s throughput and offers 200X latency improvement compared to the CPU-based implementation. It also achieves 3.9X throughput per area improvement compared with the state-of-the-art CIM accelerators.

cs.CR↗

arXiv2022

COSIME: FeFET based Associative Memory for In-Memory Cosine Similarity Search

In a number of machine learning models, an input query is searched across the trained class vectors to find the closest feature class vector in cosine similarity metric. However, performing the cosine similarities between the vectors in Von-Neumann machines involves a large number of multiplications, Euclidean normalizations and division operations, thus incurring heavy hardware energy and latency overheads. Moreover, due to the memory wall problem that presents in the conventional architecture, frequent cosine similarity-based searches (CSSs) over the class vectors requires a lot of data movements, limiting the throughput and efficiency of the system. To overcome the aforementioned challenges, this paper introduces COSIME, an general in-memory associative memory (AM) engine based on the ferroelectric FET (FeFET) device for efficient CSS. By leveraging the one-transistor AND gate function of FeFET devices, current-based translinear analog circuit and winner-take-all (WTA) circuitry, COSIME can realize parallel in-memory CSS across all the entries in a memory block, and output the closest word to the input query in cosine similarity metric. Evaluation results at the array level suggest that the proposed COSIME design achieves 333X and 90.5X latency and energy improvements, respectively, and realizes better classification accuracy when compared with an AM design implementing approximated CSS. The proposed in-memory computing fabric is evaluated for an HDC problem, showcasing that COSIME can achieve on average 47.1X and 98.5X speedup and energy efficiency improvements compared with an GPU implementation.

cs.AR↗

arXiv2022

iMARS: An In-Memory-Computing Architecture for Recommendation Systems

Recommendation systems (RecSys) suggest items to users by predicting their preferences based on historical data. Typical RecSys handle large embedding tables and many embedding table related operations. The memory size and bandwidth of the conventional computer architecture restrict the performance of RecSys. This work proposes an in-memory-computing (IMC) architecture (iMARS) for accelerating the filtering and ranking stages of deep neural network-based RecSys. iMARS leverages IMC-friendly embedding tables implemented inside a ferroelectric FET based IMC fabric. Circuit-level and system-level evaluation show that \fw achieves 16.8x (713x) end-to-end latency (energy) improvement compared to the GPU counterpart for the MovieLens dataset.

cs.AR↗

arXiv2021

IMCRYPTO: An In-Memory Computing Fabric for AES Encryption and Decryption

This paper proposes IMCRYPTO, an in-memory computing (IMC) fabric for accelerating AES encryption and decryption. IMCRYPTO employs a unified structure to implement encryption and decryption in a single hardware architecture, with combined (Inv)SubBytes and (Inv)MixColumns steps. Because of this step-combination, as well as the high parallelism achieved by multiple units of random-access memory (RAM) and random-access/content-addressable memory (RA/CAM) arrays, IMCRYPTO achieves high throughput encryption and decryption without sacrificing area and power consumption. Additionally, due to the integration of a RISC-V core, IMCRYPTO offers programmability and flexibility. IMCRYPTO improves the throughput per area by a minimum (maximum) of 3.3x (223.1x) when compared to previous ASICs/IMC architectures for AES-128 encryption. Projections show added benefit from emerging technologies of up to 5.3x to the area-delay-power product of IMCRYPTO.

cs.CR↗

arXiv2021

Deep Random Forest with Ferroelectric Analog Content Addressable Memory

Deep random forest (DRF), which incorporates the core features of deep learning and random forest (RF), exhibits comparable classification accuracy, interpretability, and low memory and computational overhead when compared with deep neural networks (DNNs) in various information processing tasks for edge intelligence. However, the development of efficient hardware to accelerate DRF is lagging behind its DNN counterparts. The key for hardware acceleration of DRF lies in efficiently realizing the branch-split operation at decision nodes when traversing a decision tree. In this work, we propose to implement DRF through simple associative searches realized with ferroelectric analog content addressable memory (ACAM). Utilizing only two ferroelectric field effect transistors (FeFETs), the ultra-compact ACAM cell can perform a branch-split operation with an energy-efficient associative search by storing the decision boundaries as the analog polarization states in an FeFET. The DRF accelerator architecture and the corresponding mapping of the DRF model to the ACAM arrays are presented. The functionality, characteristics, and scalability of the FeFET ACAM based DRF and its robustness against FeFET device non-idealities are validated both in experiments and simulations. Evaluation results show that the FeFET ACAM DRF accelerator exhibits 10^6x/16x and 10^6x/2.5x improvements in terms of energy and latency when compared with other deep random forest hardware implementations on the state-of-the-art CPU/ReRAM, respectively.

cs.ET↗

arXiv2021

MIMHD: Accurate and Efficient Hyperdimensional Inference Using Multi-Bit In-Memory Computing

Hyperdimensional Computing (HDC) is an emerging computational framework that mimics important brain functions by operating over high-dimensional vectors, called hypervectors (HVs). In-memory computing implementations of HDC are desirable since they can significantly reduce data transfer overheads. All existing in-memory HDC platforms consider binary HVs where each dimension is represented with a single bit. However, utilizing multi-bit HVs allows HDC to achieve acceptable accuracies in lower dimensions which in turn leads to higher energy efficiencies. Thus, we propose a highly accurate and efficient multi-bit in-memory HDC inference platform called MIMHD. MIMHD supports multi-bit operations using ferroelectric field-effect transistor (FeFET) crossbar arrays for multiply-and-add and FeFET multi-bit content-addressable memories for associative search. We also introduce a novel hardware-aware retraining framework (HWART) that trains the HDC model to learn to work with MIMHD. For six popular datasets and 4000 dimension HVs, MIMHD using 3-bit (2-bit) precision HVs achieves (i) average accuracies of 92.6% (88.9%) which is 8.5% (4.8%) higher than binary implementations; (ii) 84.1x (78.6x) energy improvement over a GPU, and (iii) 38.4x (34.3x) speedup over a GPU, respectively. The 3-bit $\times$ is 4.3x and 13x faster and more energy-efficient than binary HDC accelerators while achieving similar accuracies.

cs.ET↗

arXiv2021

Application-driven Design Exploration for Dense Ferroelectric Embedded Non-volatile Memories

The memory wall bottleneck is a key challenge across many data-intensive applications. Multi-level FeFET-based embedded non-volatile memories are a promising solution for denser and more energy-efficient on-chip memory. However, reliable multi-level cell storage requires careful optimizations to minimize the design overhead costs. In this work, we investigate the interplay between FeFET device characteristics, programming schemes, and memory array architecture, and explore different design choices to optimize performance, energy, area, and accuracy metrics for critical data-intensive workloads. From our cross-stack design exploration, we find that we can store DNN weights and social network graphs at a density of over 8MB/mm^2 and sub-2ns read access latency without loss in application accuracy.

cs.DC↗

arXiv2021

Logic Compatible High-Performance Ferroelectric Transistor Memory

Silicon ferroelectric field-effect transistors (FeFETs) with low-k interfacial layer (IL) between ferroelectric gate stack and silicon channel suffers from high write voltage, limited write endurance and large read-after-write latency due to early IL breakdown and charge trapping and detrapping at the interface. We demonstrate low voltage, high speed memory operation with high write endurance using an IL-free back-end-of-line (BEOL) compatible FeFET. We fabricate IL-free FeFETs with 28nm channel length and 126nm width under a thermal budget <400C by integrating 5nm thick Hf0.5Zr0.5O2 gate stack with amorphous Indium Tungsten Oxide (IWO) semiconductor channel. We report 1.2V memory window and read current window of 10^5 for program and erase, write latency of 20ns with +/-2V write pulses, read-after-write latency <200ns, write endurance cycles exceeding 5x10^10 and 2-bit/cell programming capability. Array-level analysis establishes IL-free BEOL FeFET as a promising candidate for logic-compatible high-performance on-chip buffer memory and multi-bit weight cell for compute-in-memory accelerators.

cond-mat.mes-hall↗