arXiv subjects

Michael Rüsing

Publications and source records attributed to Michael Rüsing.

At least 19 recordsLinked to original sources

arXiv2026

The domain-wall/metal-electrode injection barrier in lithium niobate: Which electrical transport model fits best?

The comprehensive description of both the electrical transport along conductive domain walls (CDWs) in lithium niobate (LNO) single crystals and the charge injection at the interfacing metal electrodes, emerged to be a complex challenge. Recently, a heuristic evaluation allowed to postulate the "R2D2" equivalent-circuit model (consisting of two parallel resistor-diode pairs) to appropriately match the DC current-voltage (I-V) characteristics. Here, we carefully revisit the interfacial electrical behavior, i.e., the diode part of the equivalent circuit model, since many more processes beyond the diode-related electron hopping transport (HT) assumed so far, may concurrently occur, such as thermionic emission (TE), Fowler-Nordheim tunneling (FNT), space-charge limited conduction (SCLC), and others more. The "R2D2" model thus needs to be generalized into an "R2X2" circuit model (with X = HT, TE, FNT, and others) to fit to the experimental data. Moreover, to double check for the best I-V curve fitting to the different theories, we apply a higher-harmonic DW current-contribution (HHCC) analysis, i.e., an AC I-V inspection, that allows us to discriminate between all these possible models with much higher precision than from pure DC I-V curve fitting. Both the AC and DC analysis reveal well consistent results, finally finding that the FNT model accounts best for the domain-wall/electrode junctions investigated here.

cond-mat.mtrl-sci↗

arXiv2026

Photorefraction Management in Lithium Niobate Waveguides: High-Temperature vs. Cryogenic Solutions

Lithium niobate sees widespread use in nonlinear and quantum optical devices, such as for sum- and difference-frequency generation or spontaneous parametric down-conversion. In lithium niobate waveguides, nonlinear optical processes are often limited by the so-called photorefractive effect, which limits the maximum input or output powers and impacts the nonlinear spectral response. Therefore, strategies for the management of photorefractive damage are a key consideration in device design. Usually, the photorefractive damage threshold, i.e. the maximal permissible operating power, can be increased by high temperature operation of devices. This approach, however, is not applicable in cryogenic environments, which may be required for specialized applications. To better understand the impact of photorefraction in nonlinear optical applications, we study the impact of photorefraction on the phase-matching spectra of two nonlinear-optical sum-frequency generation experiments at 1) high temperatures and 2) cryogenic temperatures. Furthermore, we present an approach to reduce the impact of photorefraction which is compatible with cryogenic operation. This comprises an auxiliary light source, propagating in the same waveguide, which is used to restore phase-matching spectra impacted by photorefraction, as well as reduce pyroelectric effects. Our work provides an alternative route to photorefraction management applicable to cryogenic environments, as well as in situations with tight energy budgets like space applications.

physics.optics↗

arXiv2025

Optimizing Ultra-Long Continuous Wafer-Scale Periodic Poling in Thin-Film Lithium Niobate

Periodically poled thin-film lithium niobate (TFLN) crystals are the fundamental building block for highly-efficient quantum light sources and frequency converters. The efficiency of these devices is strongly dependent on the interaction length between the light and the nonlinear material, scaling quadratically with this parameter. Nevertheless, the fabrication of long, continuously poled areas in TFLN remains challenging, the length of continuously poled areas rarely exceeds 10 mm. In this work, we demonstrate a significant progress in this field achieving the periodic poling of continuous poled areas of 70 mm length with a 3 microns poling period and a close to 50 % duty cycle. We compare two poling electrode design approaches to fabricate long, continuous poled areas. The first approach involves the poling of a single, continuous 70 mm long electrode. The second utilize a segmented approach including the poling of more than 20 individual sections forming together a 70 mm long poling area with no stitching errors. While the continuous electrode allows for faster fabrication, the segmented approach allows to individually optimize the poling resulting in less duty cycle variation. A detailed analysis of the periodic poling results reveals that the results of both are consistent with previously reported poling outcomes for shorter devices. Thus, we demonstrate wafer-scale periodic poling exceeding chiplet-size without any loss in the periodic poling quality. Our work presents a key step towards highly-efficient, narrowbandwidth and low-pump power nonlinear optical devices.

physics.app-ph↗

arXiv2025

Phonon dephasing times determined with time-delayed, broadband CARS

Coherent Raman scattering techniques as coherent anti-Stokes Raman scattering (CARS), offer significant advantages in terms of pixel dwell times and speed as compared to spontaneous Raman scattering for investigations of crystalline materials. However, the spectral information in CARS is often hampered by the presence of a non-resonant contribution to the scattering process that shifts and distorts the Raman peaks. In this work, we apply a method to obtain non-resonant background-free spectra based on time-delayed, broadband CARS (TD-BCARS) using an intra-pulse excitation scheme. In particular, this method can measure the phononic dephasing times across the full phonon spectrum at once. We test the methodology on amorphous SiO2 (glass), which is used to characterize the setup-specific and material-independent response times, and then apply TD-BCARS to the analysis of single crystals of diamond and ferroelectrics of potassium titanyl phosphate (KTP) and potassium titanyl arsenate (KTA). For diamond, we determine a dephasing time of t = 7.81 ps for the single sp3 peak.

cond-mat.mtrl-sci↗

arXiv2025

Demonstration of domain wall current in MgO-doped lithium niobate single crystals up to 400 {\deg}C

Conductive ferroelectric domain walls (DWs) represent a promising topical system for the development of nanoelectronic components and device sensors to be operational at elevated temperatures. DWs show very different properties as compared to their hosting bulk crystal, in particular with respect to the high local electrical conductivity. The objective of this work is to demonstrate DW conductivity up to temperatures as high as \SI{400}{\degreeCelsius} which extends previous studies significantly. Experimental investigation of the DW conductivity of charged, inclined DWs is performed using \SI{5}{\mole\percent} MgO-doped lithium niobate single crystals. \CR{Current-voltage (\IV) curves are determined by DC electrometer measurements and impedance spectroscopy and found to be identical. Moreover, impedance spectroscopy enables to recognize artifacts such as damaged electrodes. Temperature dependent measurements} over repeated heating cycles reveal two distinct thermal activation energies for a given DW, with the higher of the activation energies only measured at higher temperatures. Depending on the specific sample, the higher activation energy is found above \SI{160}{\degreeCelsius}~to~\SI{230}{\degreeCelsius}. This suggests, in turn, that more than one type of defect/polaron is involved, and that the dominant transport mechanism changes with increasing temperature. First principles atomistic modelling suggests that the conductivity of inclined domain walls cannot be solely explained by the formation of a 2D carrier gas and must be supported by hopping processes. This holds true even at temperatures as high as \SI{400}{\degreeCelsius}. Our investigations underline the potential to extend \DWC based nanoelectronic and sensor applications even into the so-far unexplored temperature range up to \SI{400}{\degreeCelsius}.

physics.app-ph↗

arXiv2024

Probing Ferroelectric Phase Transitions in Barium Titanate Single Crystals via $\it{in-situ}$ Second Harmonic Generation Microscopy

Ferroelectric materials play a crucial role in a broad range of technologies due to their unique properties that are deeply connected to the pattern and behavior of their ferroelectric (FE) domains. Chief among them, barium titanate (BaTiO$_3$; BTO) sees widespread applications such as in electronics but equally is a ferroelectric model system for fundamental research, e.g., to study the interplay of such FE domains, the domain walls (DWs), and their macroscopic properties, owed to BTO's multiple and experimentally accessible phase transitions. Here, we employ Second Harmonic Generation Microscopy (SHGM) to $\it{in-situ}$ investigate the cubic-to-tetragonal (at $\sim$126$^\circ$C) and the tetragonal-to-orthorhombic (at $\sim$5$^\circ$C) phase transition in single-crystalline BTO via 3-dimensional (3D) DW mapping. We demonstrate that SHGM imaging provides the direct visualization of FE domain switching as well as the domain dynamics in 3D, shedding light on the interplay of the domain structure and the phase transition. These results allow us to extract the different transition temperatures locally, to unveil the hysteresis behavior, and to determine the type of phase transition at play (1st/2nd order) from the recorded SHGM data. The capabilities of SHGM in uncovering these crucial phenomena can easily be applied to other ferroelectrics to provide new possibilities for $\it{in-situ}$ engineering of advanced ferroic devices.

cond-mat.mtrl-sci↗

arXiv2024

Towards the reproducible fabrication of conductive ferroelectric domain walls into lithium niobate bulk single crystals

Ferroelectric domain walls (DWs) are promising structures for assembling future nano-electronic circuit elements on a larger scale, since reporting domain wall currents of up to 1 mA per single DW. One key requirement hereto is their reproducible manufacturing by gaining preparative control over domain size and domain wall conductivity (DWC). To date, most works on DWC have focused on exploring the fundamental electrical properties of individual DWs within single shot experiments, with emphasis on quantifying the origins for DWC. Very few reports exist when it comes to compare the DWC properties between two separate DWs, and literally nothing exists where issues of reproducibility in DWC devices have been addressed. To fill this gap while facing the challenge of finding guidelines achieving predictable DWC performance, we report on a procedure that allows us to reproducibly prepare single hexagonal domains of a predefined diameter into uniaxial ferroelectric (FE) lithium niobate (LN) single crystals of 200 and 300 micrometers thickness, respectively. We show that the domain diameter can be controlled with an error of a few percent. As-grown DWs are then subjected to a standard procedure of current-controlled high-voltage DWC enhancement, repetitively reaching a DWC increase of 6 orders of magnitude. While all resulting DWs show significantly enhanced DWC values, subtle features in their individual current-voltage (I-V) characteristics hint towards different 3D shapes into the bulk, with variations probably reflecting local heterogeneities by defects, DW pinning, and surface-near DW inclination, which seem to have a larger impact than expected.

cond-mat.mtrl-sci↗

arXiv2024

High-temperature domain wall current in Mg-doped lithium niobate single crystals up to 400°C

Conductive ferroelectric domain walls (DWs) represent a promising topical system for the development of nanoelectronic components and devices. DWs show very different properties as compared to their bulk counterparts. Of central interest here is the domain wall current (DWC) of charged DWs in 5mol\% Mg-doped lithium niobate single crystals; in contrast to former works, we extend the DWC study here to temperatures as high as 400$^\circ$C. Both the temporal stability and the thermal activation energies of 90 - 160 meV are readily deduced from current-voltage sweeps as recorded over multiple heating cycles. Our experimental work is backed up by atomistic modelling of the DWC. The latter suggests that a large band bending renders head-to-head and tail-to-tail DWs semimetallic. These detailed investigations underline the potential to extend DWC-based nanoelectronic applications even into the so-far unexplored high-temperature regime.

cond-mat.mtrl-sci↗

arXiv2024

Lattice dynamics of LiNb$_{\text{1-x}}$Ta$_{\text{x}}$O$_{\text{3}}$ solid solutions: Theory and experiment

Lithium niobate (LNO) and lithium tantalate (LTO) see widespread use in fundamental research and commercial technologies reaching from electronics over classical optics to integrated quantum communication. In recent years, the mixed crystal system lithium niobate tantalate (LNT) allows for the dedicate engineering of material properties by combining the advantages of the two parental materials LNO and LTO. Vibrational spectroscopies such as Raman spectroscopy or (Fourier transform) infrared spectroscopy are vital techniques to provide detailed insight into the material properties, which is central to the analysis and optimization of devices. In this work, we present a joint experimental-theoretical approach allowing to unambiguously assign the spectral features in the LNT material family through both Raman and IR spectroscopy, as well as to provide an in-depth explanation for the observed scattering efficiencies based on first-principles calculations. The phononic contribution to the static dielectric tensor is calculated from the experimental and theoretical data using the generalized Lyddane-Sachs-Teller relation and compared with the results of the first-principles calculations. The joint methodology can be readily expanded to other materials and serves, e.g., as the basis for studying the role of point defects or doping.

cond-mat.mtrl-sci↗

arXiv2024

Depth resolution in piezoresponse force microscopy

Piezoresponse Force Microscopy (PFM) is one of the most widespread methods for investigating and visualizing ferroelectric domain structures down to the nanometer length scale. PFM makes use of the direct coupling of the piezoelectric response to the crystal lattice, and hence is most often applied to spatially map the 3-dimensional (3D) near-surface domain distribution of any polar or ferroic sample. Nonetheless, since most samples investigated by PFM are at least semiconducting or fully insulating, the electric ac field emerging from the conductive scanning force microscopy (SFM) tip, penetrates the sample, and hence may also couple to polar features that are deeply buried into the bulk of the sample under investigation. Thus, in the work presented here, we experimentally and theoretically explore the contrast and depth resolution capabilities of PFM, by analyzing the dependence of several key parameters. These key parameters include the depth of the buried feature, i.e. here a domain wall (DW), as well as PFM-relevant technical parameters such as the tip radius, the PFM drive voltage and frequency, and the signal-to-noise ratio. The theoretical predictions are experimentally verified using x-cut periodically-poled lithium niobate single crystals that are specially prepared into wedge-shaped samples, in order to allow the buried feature, here the DW, to be `positioned' at any depth into the bulk. This inspection essentially contributes to the fundamental understanding in PFM contrast analysis, and to the reconstruction of 3D domain structures down to a 1-$μ$m-penetration depth into the sample.

physics.app-ph↗

arXiv2024

Comparative study of photo-induced electronic transport along ferroelectric domain walls in lithium niobate single crystals

Ferroelectric domain wall conductivity (DWC) is an intriguing functional property, that can be controlled through external stimuli such as electric and mechanical fields. Optical-field control, as a non-invasive flexible handle, has rarely been applied so far, but significantly expands the possibility for both tuning and probing DWC. On the one hand, as known from Second-Harmonic, Raman, and CARS micro-spectroscopy, the optical in-and-out approach delivers parameters on the DW distribution, the DW inclination, and probes the DW vibrational modes; on the other hand, photons might be applied also to directly generate charge carriers within the DW, hence acting as a functional and spectrally tunable probe to deduce the integral or local absorption properties and bandgaps of conductive DWs. Here, we report on such an optoelectronic approach by investigating the photo-induced DWC (PI-DWC) in DWs of the model system lithium niobate, a material that is well known for hosting conductive DWs. We compare three different crystals containing different numbers of domain walls: (A) none, (B) one, and (C) many conductive DWs. All samples are inspected for their current-voltage (I-V) behavior (i) in darkness, and (ii) for different illumination wavelengths swept from 500 nm down to 310 nm. All samples show their maximum PI-DWC at 310 nm, i.e., at the optical bandgap of lithium niobate; moreover, sample (C) reaches PI-DWCs of several $μ$A. Interestingly, a noticeable PI-DWC is also observed for sub-bandgap illumination, i.e., wavelengths as high as 500 nm, hinting towards the existence and decisive role of electronic in-gap states that contribute to the electronic transport along DWs. Finally, conductive atomic force microscopy (c-AFM) investigations under illumination proved that the PI-DWC is confined to the DW area, and does not originate from photo-induced bulk conductivity.

physics.app-ph↗

arXiv2023

R2D2 -- An equivalent-circuit model that quantitatively describes domain wall conductivity in ferroelectric LiNbO$_3$

Ferroelectric domain wall (DW) conductivity (DWC) can be attributed to two separate mechanisms: (a) the injection/ejection of charge carriers across the Schottky barrier formed at the (metal-) electrode-DW junction and (b) the transport of those charge carriers along the DW. Current-voltage (IU) characteristics, recorded at variable temperatures from LiNbO$_3$ (LNO) DWs, are clearly able to differentiate between these two contributions. Practically, they allow us here to directly quantify the physical parameters relevant for the two mechanisms (a) and (b) mentioned above. These are, e.g., the resistance of the DW, the saturation current, the ideality factor, and the Schottky barrier height of the electrode/DW junction. Furthermore, the activation energies needed to initiate the thermally-activated electronic transport along the DWs, can be extracted. In addition, we show that electronic transport along LiNbO$_3$ DWs can be elegantly viewed and interpreted in an adapted semiconductor picture based on a double-diode/double-resistor equivalent circuit model, the R2D2 model. Finally, our R2D2 model was checked for its universality by fitting the DWC data not only to z-cut LNO bulk DWs, but equally to z-cut thin-film LNO DWs, and DWC from x-cut DWs as reported in literature.

cond-mat.mtrl-sci↗

arXiv2023

Hall mobilities and sheet carrier densities in a single LiNbO$_3$ conductive ferroelectric domain wall

For the last decade, conductive domain walls (CDWs) in single crystals of the uniaxial model ferroelectric lithium niobate (LiNbO$_3$, LNO) have shown to reach resistances more than 10 orders of magnitude lower as compared to the surrounding bulk, with charge carriers being firmly confined to sheets of a few nanometers in width. LNO thus currently witnesses an increased attention since bearing the potential for variably designing room-temperature nanoelectronic circuits and devices based on such CDWs. In this context, the reliable determination of the fundamental transport parameters of LNO CDWs, in particular the 2D charge carrier density $n_{2D}$ and the Hall mobility $μ_{H}$ of the majority carriers, are of highest interest. In this contribution, we present and apply a robust and easy-to-prepare Hall-effect measurement setup by adapting the standard 4-probe van-der-Pauw method to contact a single, hexagonally-shaped domain wall that fully penetrates the 200-$μ$m-thick LNO bulk single crystal. We then determine $n_{2D}$ and $μ_{H}$ for a set of external magnetic fields $B$ and prove the expected cosine-like angular dependence of the Hall voltage. Lastly, we present photo-Hall measurements of one and the same DW, by determining the impact of super-bandgap illumination on the 2D charge carrier density $n_{2D}$.

cond-mat.mtrl-sci↗

arXiv2023

Comparing Transmission- and Epi-BCARS: A Transnational Round Robin on Solid State Materials

Broadband coherent anti-Stokes Raman scattering (BCARS) is an advanced Raman spectroscopy method that combines the spectral sensitivity of spontaneous Raman scattering (SR) with the increased signal intensity of single-frequency coherent Raman techniques. These two features make BCARS particularly suitable for ultra-fast imaging of heterogeneous samples, as already shown in biomedicine. Recent studies demonstrated that BCARS also shows exceptional spectroscopic capabilities when inspecting crystalline materials like lithium niobate and lithium tantalate, and can be used for fast imaging of ferroelectric domain walls. These results strongly suggest the extension of BCARS towards new imaging applications like mapping defects, strain, or dopant levels, similar to standard SR imaging. Despite these advantages, BCARS suffers from a spurious and chemically unspecific non-resonant background (NRB) that distorts and shifts the Raman peaks. Post-processing numerical algorithms are then used to remove the NRB and to obtain spectra comparable to SR results. Here, we show the reproducibility of BCARS by conducting an internal Round Robin with two different BCARS experimental setups, comparing the results on different crystalline materials of increasing structural complexity: diamond, 6H-SiC, KDP, and KTP. First, we compare the detected and phase-retrieved signals, the setup-specific NRB-removal steps, and the mode assignment. Subsequently, we demonstrate the versatility of BCARS by showcasing how the selection of pump wavelength, pulse width, and detection geometry can be tailored to suit the specific objectives of the experiment. Finally, we compare and optimize measurement parameters for the high-speed, hyperspectral imaging of ferroelectric domain walls in lithium niobate.

cond-mat.mtrl-sci↗

arXiv2022

Modeling nonlinear optical interactions of focused beams in bulk crystals and thin films: A phenomenological approach

Coherent nonlinear optical micro-spectroscopy is a frequently used tool in modern material science, as it is sensitive to many different local observables, which comprise, among others, crystal symmetry and vibrational properties. The richness in information, however, may come with challenges in data interpretation, as one has to disentangle the many different effects like multiple reflections, phase jumps at interfaces, or the influence of the Guoy-phase. In order to facilitate interpretation, the work presented here proposes an easy-to-use semi-analytical modeling ansatz, that bases upon known analytical solutions using Gaussian beams. Specifically, we apply this ansatz to compute nonlinear optical responses of (thin film) optical materials. We try to conserve the meaning of intuitive parameters like the Gouy-phase and the nonlinear coherent interaction length. In particular, the concept of coherence length is extended, which is a must when using focal beams. The model is subsequently applied to exemplary cases of second-harmonic and third-harmonic generation. We observe a very good agreement with experimental data and furthermore, despite the constraints and limits of the analytical ansatz, our model performs similarly well as when using more rigorous simulations. However, it outperforms the latter in terms of computational power, requiring more than three orders less computational time and less performant computer systems.

physics.optics↗

arXiv2022

Vibrational properties of LiNbO$_3$ and LiTaO$_3$ under uniaxial stress

Structural strain severely impacts material properties such as the linear and non-linear optical response. Moreover, strain plays a key role, e.g., in the physics of ferroelectrics and in particular of their domain walls. $μ$-Raman spectroscopy is a well-suited technique for the investigation of such strain effects, as it allows to measure the lattice dynamics locally. However, quantifying and reconstructing strain fields from Raman maps requires knowledge on the strain dependence of phonon frequencies. In this work, we have analyzed both theoretically and experimentally the phonon frequencies in the widely used ferroelectrics lithium niobate and lithium tantalate as a function of uniaxial strain via density functional theory and $μ$-Raman spectroscopy. Overall, we find a good agreement between our $ab$ $initio$ models and the experimental data performed with a stress cell. The majority of phonons show an increase in frequency under compressive strain, while the opposite is observed for tensile strains. Moreover, for E-type phonons, we observe the lifting of degeneracy already at moderate strain fields (i.e. at $\pm0.2~\%$) along the x and y directions. This work hence allows for the systematic analysis of 3D strains in modern-type bulk and thin-film devices assembled from lithium niobate and tantalate.

cond-mat.mtrl-sci↗

arXiv2022

Impact of 3D curvature on the polarization orientation in non-Ising domain walls

Ferroelectric domain boundaries are quasi-two-dimensional functional interfaces with high prospects for nanoelectronic applications. Despite their reduced dimensionality, they can exhibit complex non-Ising polarization configurations and unexpected physical properties. Here, the impact of the three-dimensional (3D) curvature on the polarization profile of nominally uncharged 180° domain walls in LiNbO3 is studied using second-harmonic generation microscopy and 3D polarimetry analysis. Correlations between the domain wall curvature and the variation of its internal polarization unfold in the form of modulations of the Néel-like character, which we attribute to the flexoelectric effect. While the Néel-like character originates mainly from the tilting of the domain wall, the internal polarization adjusts its orientation due to the synergetic upshot of dipolar and monopolar bound charges and their variation with the 3D curvature. Our results show that curved interfaces in solid crystals may offer a rich playground for tailoring nanoscale polar states.

cond-mat.mtrl-sci↗

arXiv2022

Tuning the domain wall conductivity in bulk lithium niobate by uniaxial stress

Conductive domain walls (CDWs) in insulating ferroelectrics have recently attracted considerable attention due to their unique topological, optical, and electronic properties, and offer potential applications such as in memory devices or re-writable circuitry. The electronic properties of domain walls (DWs) can be tuned by the application of strain, hence controlling the charge carrier density at DWs. In this work, we study the influence of uniaxial stress on the conductivity of DWs in the bulk single crystal lithium niobate (LiNbO$_3$). Using conductive atomic force microscopy (cAFM), we observe a large asymmetry in the conductivity of DWs, where only negatively screened walls, so called head-to-head DWs, are becoming increasingly conductive, while positively screened, tail-to-tails DWs, show a decrease in conductivity. This asymmetry of DW conductivity agrees with our theoretical model based on the piezoelectric effect. In addition, we observed that the current in the DW increases up to an order of magnitude for smaller compressive stresses of 100 MPa. This response of DWs remained intact for multiple stress cycles over 2 months, opening a path for future applications.

cond-mat.mtrl-sci↗