arXiv subjects

Michael Schmid

Publications and source records attributed to Michael Schmid.

At least 55 records · Page 3Linked to original sources

arXiv2023

Real-space investigation of polarons in hematite Fe2O3

In polarizable materials, electronic charge carriers interact with the surrounding ions, leading to quasiparticle behaviour. The resulting polarons play a central role in many materials properties including electrical transport, optical properties, surface reactivity and magnetoresistance, and polaron properties are typically investigated indirectly through such macroscopic characteristics. Here, noncontact atomic force microscopy (nc-AFM) is used to directly image polarons in Fe2O3 at the single quasiparticle limit. A combination of Kelvin probe force microscopy (KPFM) and kinetic Monte Carlo (KMC) simulations shows that Ti doping dramatically enhances the mobility of electron polarons, and density functional theory (DFT) calculations indicate that a metallic transition state is responsible for the enhancement. In contrast, hole polarons are significantly less mobile and their hopping is hampered further by the introduction of trapping centres.

cond-mat.mtrl-sci↗

arXiv2022

Single Rh adatoms stabilized on α-Fe2O3(1-102) by co-adsorbed water

Oxide-supported single-atom catalysts are commonly modelled as a metal atom substituting surface cation sites in a low-index surface. Adatoms with dangling bonds will inevitably coordinate molecules from the gas phase, and adsorbates such as water can affect both stability and catalytic activity. Here, we use scanning tunneling microscopy (STM), noncontact atomic force microscopy (ncAFM), and x-ray photoelectron spectroscopy (XPS) to show that high densities of single Rh adatoms are stabilized on alpha-Fe2O3(1-102) in the presence of 2x10^(-8) mbar of water at room temperature, in marked contrast to the rapid sintering observed under UHV conditions. Annealing to 50 °C in UHV desorbs all water from the substrate leaving only the OH groups coordinated to Rh, and high-resolution ncAFM images provide a direct view into the internal structure. We provide direct evidence of the importance of OH ligands in the stability of single atoms, and argue that their presence should be assumed when modelling SAC systems.

cond-mat.mtrl-sci↗

arXiv2022

Rapid oxygen exchange between hematite and water vapor

Oxygen exchange at oxide/liquid and oxide/gas interfaces is important in technology and environmental studies, as it is closely linked to both catalytic activity and material degradation. The atomic-scale details are mostly unknown, however, and are often ascribed to poorly defined defects in the crystal lattice. Here we show that even thermodynamically stable, well-ordered surfaces can be surprisingly reactive. Specifically, we show that all the 3-fold coordinated lattice oxygen atoms on a defect-free single-crystalline r-cut (1-102) surface of hematite (α-Fe2O3) are exchanged with oxygen from surrounding water vapor within minutes at temperatures below 70 °C, while the atomic-scale surface structure is unperturbed by the process. A similar behavior is observed after liquid water exposure, but the experimental data clearly show most of the exchange happens during desorption of the final monolayer, not during immersion. Density functional theory computations show that the exchange can happen during on-surface diffusion, where the cost of the lattice oxygen extraction is compensated by the stability of an HO-HOH-OH complex. Such insights into lattice oxygen stability are highly relevant for many research fields ranging from catalysis and hydrogen production to geochemistry and paleoclimatology.

cond-mat.mtrl-sci↗

arXiv2022

CO oxidation by Pt2/Fe3O4: metastable dimer and support configurations facilitate lattice oxygen extraction

Heterogeneous catalysts based on sub-nanometer metal clusters often exhibit strongly size-dependent properties, and the addition or removal of a single atom can make all the difference. Identifying the most active species and deciphering the reaction mechanism is extremely difficult, however, because it is often not clear how the catalyst evolves in operando. Here, we utilize a combination of atomically resolved scanning probe microscopies, spectroscopic techniques, and density functional theory (DFT)-based calculations to study CO oxidation by a model Pt/Fe3O4(001) single-atom catalyst. We demonstrate that (PtCO)2 dimers, formed dynamically through the agglomeration of mobile Pt-carbonyl species, catalyse a reaction involving the oxide support to form CO2. Pt2 dimers produce one CO2 molecule before falling apart into two adatoms, releasing the second CO. Interestingly, Olattice extraction only becomes facile when both the Pt-dimer and the Fe3O4 support can access metastable configurations, suggesting that substantial, concerted rearrangements of both cluster and support must be considered for reactions occurring at elevated temperature.

cond-mat.mtrl-sci↗

arXiv2022

Automated Real-Space Lattice Extraction for Atomic Force Microscopy Images

Analyzing atomically resolved images is a time-consuming process requiring solid experience and substantial human intervention. In addition, the acquired images contain a large amount of information such as crystal structure, presence and distribution of defects, and formation of domains, which need to be resolved to understand a material's surface structure. Therefore, machine learning techniques have been applied in scanning probe and electron microscopies during the last years, aiming for automatized and efficient image analysis. This work introduces a free and open source tool (AiSurf: Automated Identification of Surface Images) developed to inspect atomically resolved images via Scale-Invariant Feature Transform (SIFT) and Clustering Algorithms (CA). AiSurf extracts primitive lattice vectors, unit cells, and structural distortions from the original image, with no pre-assumption on the lattice and minimal user intervention. The method is applied to various atomically resolved non-contact atomic force microscopy (AFM) images of selected surfaces with different levels of complexity: anatase TiO2(101), oxygen deficient rutile TiO2(110) with and without CO adsorbates, SrTiO3(001) with Sr vacancies and graphene with C vacancies. The code delivers excellent results and has proved to be robust against atom misclassification and noise, thereby facilitating the interpretation scanning probe microscopy images.

cond-mat.mtrl-sci↗

arXiv2022

Screening in a two-band model for superconducting infinite-layer nickelate

Starting from an effective two-dimensional two-band model for infinite layered nickelates, consisting of bands obtained from $d$ and $s$--like orbitals, we investigate to which extend it can be mapped onto a single-band Hubbard model. We identify screening of the more itinerant $s$-like band as an important driver. In absence of screening one strongly-correlated band gives an antiferromagnetic ground state. For weak screening, the strong correlations push electrons out of the $s$-band so that the undoped nickelate remains a Mott insulator with half filled $d$ orbitals. This regime markedly differs from the observations in high-$T_c$ cuprates and pairing with $s$-wave symmetry would rather be expected in the superconducting state. In contrast, for strong screening, the $s$ and $d_{x^2-y^2}$ bands are both partly filled and couple only weakly, so that one approximately finds a self-doped $d$ band as well as tendencies towards $d$-wave pairing. Particularly in the regime of strong screening mapping to a one-band model gives interesting spectral weight transfers when a second $s$ band is also partly filled. We thus find that both one-band physics and a Kondo-lattice--like regime emerge from the same two-orbital model, depending on the strength of electronic correlations and the size of the $s$-band pocket.

cond-mat.str-el↗

arXiv2022

Competing electronic states emerging on polar surfaces

Excess charge on polar surfaces of ionic compounds is commonly described by the two-dimensional electron gas (2DEG) model, a homogeneous distribution of charge, spatially-confined in a few atomic layers. Here, by combining scanning probe microscopy with density functional theory calculations, we show that excess charge on the polar TaO$_2$ termination of KTaO$_3$(001) forms more complex electronic states with different degrees of spatial and electronic localization: charge density waves (CDW) coexist with strongly-localized electron polarons and bipolarons. These surface electronic reconstructions, originating from the combined action of electron-lattice interaction and electronic correlation, are energetically more favorable than the 2DEG solution. They exhibit distinct spectroscopy signals and impact on the surface properties, as manifested by a local suppression of ferroelectric distortions. Controlling the degree of charge ordering and the transition from ferroelectric to paraelectric states could be of great benefit for the generation and transport of carriers in electronic applications.

cond-mat.mtrl-sci↗

arXiv2021

Surface Reduction State Determines Stabilization and Incorporation of Rh on α-Fe2O3(1-102)

Iron oxides (FeOx) are among the most common support materials utilized in single atom catalysis. The support is nominally Fe2O3, but strongly reductive treatments are usually applied to activate the as-synthesized catalyst prior to use. Here, we study Rh adsorption and incorporation on the (1-102) surface of hematite (α-Fe2O3), which switches from a stoichiometric (1x1) termination to a reduced (2x1) reconstruction in reducing conditions. Rh atoms form clusters at room temperature on both surface terminations, but Rh atoms incorporate into the support lattice as isolated atoms upon annealing above 400 °C. Under mildly oxidizing conditions, the incorporation process is so strongly favoured that even large Rh clusters containing hundreds of atoms dissolve into the surface. Based on a combination of low energy ion scattering and scanning tunnelling microscopy data, as well as density functional theory, we conclude that the Rh atoms are stabilized in the immediate subsurface, rather than the surface layer.

cond-mat.mtrl-sci↗

arXiv2021

Ni modified Fe3O4(001) surface as a simple model system for understanding the Oxygen Evolution Reaction

Electrochemical water splitting is an environmentally friendly technology to store renewable energy in the form of chemical fuels. Among the earth-abundant first-row transition metal-based catalysts, mixed Ni-Fe oxides have shown promising performance for effective and low-cost catalysis of the oxygen evolution reaction (OER) in alkaline media, but the synergistic roles of Fe and Ni cations in the OER mechanism remain unclear. In this work, we report how addition of Ni changes the reactivity of a model iron oxide catalyst, based on Ni deposited on and incorporated in a magnetite Fe3O4 (001) single crystal, using a combination of surface science techniques in ultra-high-vacuum such as low energy electron diffraction (LEED), x-rays photoelectron spectroscopy (XPS), low energy ion scattering (LEIS), and scanning tunneling microscopy (STM), as well as atomic force microscopy (AFM) in air, and electrochemical methods such cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in alkaline media. A significant improvement in the OER activity is observed when the top surface presents an Fe:Ni composition ratio in the range 20-40%, which is in good agreement with what has been observed for powder catalysts. Furthermore, a decrease in the OER overpotential is observed following surface aging in electrolyte for three days. At higher Ni load, AFM shows the growth of a new phase attributed to an (oxy)-hydroxide phase which, according to CV measurements, does not seem to correlate with the surface activity towards OER. EIS suggests that the OER precursor species observed on the clean and Ni-modified surfaces are similar and Fe-centered, but form at lower overpotentials when the surface Fe:Ni ratio is optimized.

cond-mat.mtrl-sci↗

arXiv2021

Unravelling CO adsorption on model single-atom catalysts

Understanding how the local environment of a single-atom catalyst affects stability and reactivity remains a significant challenge. We present an in-depth study of Cu1, Ag1, Au1, Ni1, Pd1, Pt1, Rh1, and Ir1 species on Fe3O4(001); a model support where all metals occupy the same 2-fold coordinated adsorption site upon deposition at room temperature. Surface science techniques revealed that CO adsorption strength at single metal sites differs from the respective metal surfaces and supported clusters. Charge transfer into the support modifies the d-states of the metal atom and the strength of the metal-CO bond. These effects could strengthen the bond (as for Ag1-CO) or weaken it (as for Ni1-CO), but CO-induced structural distortions reduce adsorption energies from those expected based on electronic structure alone. The extent of the relaxations depends on the local geometry and could be predicted by analogy to coordination chemistry.

cond-mat.mtrl-sci↗

arXiv2021

Character of Doped Holes in Nd$_{1-x}$Sr$_x$NiO$_2$

We investigate charge distribution in the recently discovered high-$T_c$ superconductors, layered nickelates. With increasing value of charge-transfer energy we observe the expected crossover from the cuprate to the local triplet regime upon hole doping. We find that the $d-p$ Coulomb interaction $U_{dp}$ plays a role and makes Zhang-Rice singlets less favorable, while the amplitude of local triplets is enhanced. By investigating the effective two-band model with orbitals of $x^2-y^2$ and $s$ symmetries we show that antiferromagnetic interactions dominate for electron doping. The screened interactions for the $s$ band suggest the importance of rare-earth atoms in superconducting nickelates.

cond-mat.str-el↗

arXiv2021

Mode-center Placement of Monolayer WS$_{2}$ in a Photonic Polymer Waveguide

Effective integration of 2D materials such as monolayer transition metal dichalcogenides (TMDs) into photonic waveguides and integrated circuits is being intensely pursued due to the materials' strong exciton-based optical response. Here, we present a platform where a WS$_{2}$-hBN 2D heterostructure is directly integrated into the photonic mode-center of a novel polymer ridge waveguide. FDTD simulations and collection of photoluminescence from the guided mode indicate that this system exhibits significantly improved waveguide-emitter coupling over a previous elastomer platform. This is facilitated by the platform's enhanced refractive-index contrast and a new method for mode-center integration of the coupled TMD. The integration is based on a simple dry-transfer process that is applicable to other 2D materials, and the platform's elastomeric nature is a natural fit to explore strain-tunable hybrid-photonic devices. The demonstrated ability of coupling photoluminescence to a polymer waveguide opens up new possibilities for hybrid-photonic systems in a variety of contexts.

physics.optics↗

arXiv2021

3D printed hybrid refractive/diffractive achromat and apochromat for the visible wavelength range

Three-dimensional (3D) direct laser writing is a powerful technology to create nano- and microscopic optical devices. While the design freedom of this technology offers the possibility to reduce different monochromatic aberrations, reducing chromatic aberrations is often neglected. In this Letter, we successfully demonstrate the combination of refractive and diffractive surfaces to create a refractive/diffractive achromat and show, to the best of our knowledge, the first refractive/diffractive apochromat by using DOEs and simultaneously combining two different photoresists, namely IP-S and IP-n162. These combinations drastically reduce chromatic aberrations in 3D printed micro-optics for the visible wavelength range. The optical properties, as well as the substantial reduction of chromatic aberrations, are characterized, and we outline the benefits of 3D direct laser written achromats and apochromats for micro-optics.

physics.optics↗

arXiv2021

An oxygen-rich, tetrahedral surface phase on high-temperature rutile VO$_2$(110)$_\text{T}$ single crystals

Vanadium dioxide undergoes a metal-insulator transition (MIT) from an insulating (monoclinic) to a metallic (tetragonal) phase close to room temperature, which makes it a promising functional material for many applications, e.g. as chemical sensors. Not much is known about its surface and interface properties, although these are critical in many of its applications. This work presents an atomic-scale investigation of the tetragonal rutile VO$_2$(110)$_\text{T}$ single-crystal surface and reports results obtained with scanning tunneling microscopy (STM), low-energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS), supported by density-functional theory-based (DFT) calculations. The surface reconstructs into an oxygen-rich (2$\times$2) superstructure that coexists with small patches of the underlying, unreconstructed (110)-(1$\times$1) surface. The best structural model for the (2$\times$2) surface termination, conceptually derived from a vanadium pentoxide (001) monolayer, consists of rings of corner-shared tetrahedra. Over a wide range of oxygen chemical potentials this reconstruction is more stable than the unreconstructed (110) surface as well as models proposed in the literature.

cond-mat.mtrl-sci↗

arXiv2020

Does a pristine, unreconstructed SrTiO$_3$(001) surface exist?

The surfaces of perovskite oxides affect their functional properties, and while a bulk-truncated (1$\times$1) termination is generally assumed, its existence and stability is controversial. Here, such a surface is created by cleaving the prototypical SrTiO$_3$(001) in ultra-high vacuum, and its response to thermal annealing is observed. Atomically resolved nc-AFM shows that intrinsic point defects on the as-cleaved surface migrate at temperatures above 200\,$^\circ$C. At 400--500\,$^\circ$C, a disordered surface layer forms, albeit still with a (1$\times$1) pattern in LEED. Purely TiO$_2$-terminated surfaces, prepared by wet-chemical treatment, are also disordered despite their (1$\times$1) periodicity in LEED.

cond-mat.mtrl-sci↗

arXiv2020

2D Surface Phase Diagram of a Multicomponent Perovskite Oxide: La$_{0.8}$Sr$_{0.2}$MnO$_3$(110)

The many surface reconstructions of (110)-oriented lanthanum--strontium manganite (La$_{0.8}$Sr$_{0.2}$MnO$_3$, LSMO) were followed as a function of the oxygen chemical potential ($μ_\text{O}$) and the surface cation composition. Decreasing $μ_\text{O}$ causes Mn to migrate across the surface, enforcing phase separation into A-site-rich areas and a variety of composition-related, structurally diverse B-site-rich reconstructions. The composition of these phase-separated structures was quantified with scanning tunneling microscopy (STM), and these results were used to build a 2D phase diagram of the LSMO(110) equilibrium surface structures.

cond-mat.mtrl-sci↗

arXiv2020

IrO2 Surface Complexions Identified Through Machine Learning and Surface Investigations

A Gaussian Approximation Potential (GAP) was trained using density-functional theory data to enable a global geometry optimization of low-index rutile IrO2 facets through simulated annealing. Ab initio thermodynamics identifies (101) and (111) (1x1)-terminations competitive with (110) in reducing environments. Experiments on single crystals find that (101) facets dominate, and exhibit the theoretically predicted (1x1) periodicity and X-ray photoelectron spectroscopy (XPS) core level shifts. The obtained structures are analogous to the complexions discussed in the context of ceramic battery materials.

cond-mat.mtrl-sci↗

arXiv2020

Excitonic Magnetism at the intersection of Spin-orbit coupling and crystal-field splitting

Excitonic magnetism involving superpositions of singlet and triplet states is expected to arise for two holes in strongly correlated and spin-orbit coupled $t_{2g}$ orbitals. However, uncontested material examples for its realization are rare. Applying the Variational Cluster Approach to the square lattice, we find conventional spin antiferromagnetism combined with orbital order at weak and excitonic order at strong spin-orbit coupling. We address the specific example of Ca$_2$RuO$_4$ using ab-initio modeling and conclude it to realize excitonic magnetism despite its pronounced orbital polarization.

cond-mat.str-el↗