arXiv subjects

Michael Schmid

Publications and source records attributed to Michael Schmid.

At least 91 records · Page 5Linked to original sources

arXiv2018

Reaction of O2 with Subsurface Oxygen Vacancies on TiO2 Anatase (101)

Oxygen (O2) adsorbed on metal oxides is important in catalytic oxidation reactions, chemical sensing, and photocatalysis. Strong adsorption requires transfer of negative charge from oxygen vacancies (VOs) or dopants, for example. With scanning tunneling microscopy, we observed, transformed, and, in conjunction with theory, identified the nature of O2 molecules on the (101) surface of anatase (titanium oxide, TiO2) doped with niobium. VOs reside exclusively in the bulk, but we pull them to the surface with a strongly negatively charged scanning tunneling microscope tip. O2 adsorbed as superoxo (O2)- at fivefold-coordinated Ti sites was transformed to peroxo (O2)2- and, via reaction with a VO, placed into an anion surface lattice site as an (O2)O species. This so-called bridging dimer also formed when O2 directly reacted with VOs at or below the surface.

cond-mat.mtrl-sci↗

arXiv2018

Stoichiometry-driven switching between surface reconstructions on SrTiO$_3$(001)

Controlling the surface structure on the atomic scale is a major difficulty for most transition metal oxides; this is especially true for the ternary perovskites. The influence of surface stoichiometry on the atomic structure of the SrTiO$_3$(001) surface was examined with scanning tunneling microscopy, low-energy electron diffraction, low-energy He$^+$ ion scattering (LEIS), and X-ray photoelectron spectroscopy (XPS). Vapor deposition of 0.8 monolayer (ML) strontium and 0.3 ML titanium, with subsequent annealing to 850 °C in 4 $\times$ 10$^{-6}$ mbar O$_2$, reversibly switches the surface between c(4 $\times$ 2) and (2 $\times$ 2) reconstructions, respectively. The combination of LEIS and XPS shows a different stoichiometry that is confined to the top layer. Geometric models for these reconstructions need to take into account these different surface compositions.

cond-mat.mtrl-sci↗

arXiv2018

Stabilizing Single Ni adatoms on a Two-dimensional Porous Titania Overlayer at the SrTiO$_3$(110) Surface

Nickel vapor-deposited on the SrTiO$_3$(110) surface was studied using scanning tunneling microscopy, photoemission spectroscopy (PES), and density functional theory calculations. This surface forms a (4 $\times$ 1) reconstruction, composed of a 2-D titania structure with periodic six- and ten-membered nanopores. Anchored at these nanopores, Ni single adatoms are stabilized at room temperature. PES measurements show that the Ni adatoms create an in-gap state located at 1.9 eV below the conduction band minimum and induce an upward band bending. Both experimental and theoretical results suggest that Ni adatoms are positively charged. Our study produces well-dispersed single-adatom arrays on a well-characterized oxide support, providing a model system to investigate single-adatom catalytic and magnetic properties.

cond-mat.mtrl-sci↗

arXiv2018

Bulk and surface characterization of In$_2$O$_3$(001) single crystals

A comprehensive bulk and surface investigation of high-quality In$_2$O$_3$(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. Inductively coupled plasma mass spectrometry (ICP-MS) reveals small residues of Pb, Mg, and Pt in the crystals. Four-point-probe measurements show a resistivity of 2.0 $\pm$ 0.5 $\times$ 10$^5$ Ω cm, which translates into a carrier concentration of $\approx$10$^{12}$ cm$^{-3}$. The results from x-ray diffraction (XRD) measurements revise the lattice constant to 10.1150(5) Å from the previously accepted value of 10.117 Å. Scanning tunneling microscopy (STM) images of a reduced (sputtered/annealed) and oxidized (exposure to atomic oxygen at 300 °C) surface show a step height of 5 Å, which indicates a preference for one type of surface termination. The surfaces stay flat without any evidence for macroscopic faceting under any of these preparation conditions. A combination of low-energy ion scattering (LEIS) and atomically resolved STM indicates an indium-terminated surface with small islands of 2.5 Å height under reducing conditions, with a surface structure corresponding to a strongly distorted indium lattice. Scanning tunneling spectroscopy (STS) reveals a pronounced surface state at the Fermi level ($E_F$). Photoelectron spectroscopy (PES) shows additional, deep-lying band gap states, which can be removed by exposure of the surface to atomic oxygen. Oxidation also results in a shoulder at the O 1s core level at a higher binding energy, possibly indicative of a surface peroxide species. A downward band bending of 0.4 eV is observed for the reduced surface, while the band bending of the oxidized surface is of the order of 0.1 eV or less.

cond-mat.mtrl-sci↗

arXiv2018

Pt$_3$Zr(0001): A substrate for growing well-ordered ultrathin zirconia films by oxidation

We have studied the surface of pure and oxidized Pt$_3$Zr(0001) by scanning tunneling microscopy (STM), Auger electron microscopy, and density functional theory (DFT). The well-annealed alloy surface shows perfect long-range chemical order. Occasional domain boundaries are probably caused by nonstoichiometry. Pt$_3$Zr exhibits ABAC stacking along [0001]; only the A-terminated surfaces are seen by STM, in agreement with DFT results showing a lower surface energy for the A termination. DFT further predicts a stronger inward relaxation of the surface Zr than for Pt, in spite of the larger atomic size of Zr. A closed ZrO$_2$ film is obtained by oxidation in $10^{-7}$ mbar O$_2$ at 400 $^\circ$C and post-annealing at $\approx 800 ^\circ$C. The oxide consists of an O-Zr-O trilayer, equivalent to a (111) trilayer of the fluorite structure of cubic ZrO$_2$, but contracted laterally. The oxide forms a $(\sqrt{19} \times \sqrt{19})$R23$^\circ$ superstructure. The first monolayer of the substrate consists of Pt and contracts, similar to the metastable reconstruction of pure Pt(111). DFT calculations show that the oxide trilayer binds rather weakly to the substrate. In spite of the O-terminated oxide, bonding to the substrate mainly occurs via the Zr atoms in the oxide, which strongly buckle down towards the Pt substrate atoms, if near a Pt position. According to DFT, the oxide has a bandgap; STM indicates that the conduction band minimum lies $\approx 2.3$ eV above $E_\mathrm{F}$.

cond-mat.mtrl-sci↗

arXiv2018

Vacancy clusters at domain boundaries and band bending at the SrTiO$_3$(110) surface

Antiphase domain boundaries (APDBs) in the ($n \times 1$)($n=4,5$) reconstructions of the SrTiO$_3$(110) surface were studied with scanning tunneling microscopy, x-ray photoemission spectroscopy, and density functional theory (DFT) calculations. Two types of APDBs form on each reconstruction; they consist of Ti$_x$O$_y$ vacancy clusters with a specific stoichiometry. The presence of these clusters is controlled by the oxygen pressure during annealing. The structural models of the vacancy clusters are resolved with DFT, which also shows that their relative stability depends on the chemical potential of oxygen. The surface band bending can be tuned by controlling the vacancy clusters at the domain boundaries.

cond-mat.mtrl-sci↗

arXiv2018

Point defects at cleaved Sr$_{n+1}$Ru$_n$O$_{3n+1}$(001) surfaces

The (001) surfaces of cleaved Sr$_3$Ru$_2$O$_7$ and Sr$_2$RuO$_4$ samples were investigated using low-temperature scanning tunneling microscopy and density functional theory calculations. Intrinsic defects are not created during cleaving. This experimental observation is consistent with calculations, where the formation energy for a Sr and O vacancy, 4.19 eV and 3.81 eV, respectively, is significantly larger than that required to cleave the crystal, 1.11 eV/(1 $\times$ 1) unit cell. Surface oxygen vacancies can be created through electron bombardment, however, and their appearance is shown to vary strongly with the imaging conditions. Point defects observed on as-cleaved surfaces result from bulk impurities and adsorption from the residual gas.

cond-mat.mtrl-sci↗

arXiv2018

(Sub)surface mobility of oxygen vacancies at the TiO$_2$ anatase (101) surface

Anatase is a metastable polymorph of TiO$_2$. In contrast to the more widely-studied TiO$_2$ rutile, O vacancies (V$_\mathrm O$'s) are not stable at the anatase (101) surface. Low-temperature STM shows that surface V$_\mathrm O$'s, created by electron bombardment at 105 K, start migrating to subsurface sites at temperatures $\geq$ 200 K. After an initial decrease of the V$_\mathrm O$ density, a temperature-dependent dynamic equilibrium is established where V$_\mathrm O$'s move to subsurface sites and back again, as seen in time-lapse STM images. We estimate that activation energies for subsurface migration lie between 0.6 and 1.2 eV; in comparison, DFT calculations predict a barrier of ca. 0.75 eV. The wide scatter of the experimental values might be attributed to inhomogeneously-distributed subsurface defects in the reduced sample.

cond-mat.mtrl-sci↗

arXiv2018

High chemical activity of a perovskite surface: reaction of CO with Sr$_3$Ru$_2$O$_7$

Adsorption of CO at the Sr$_3$Ru$_2$O$_7$(001) surface was studied with low-temperature scanning tunneling microscopy (STM) and density functional theory. In situ cleaved single crystals terminate in an almost perfect SrO surface. At 78 K, CO first populates impurities and then adsorbs above the apical surface O with a binding energy E$_\mathrm{ads}$=-0.7 eV. Above 100 K, this physisorbed CO replaces the surface O, forming a bent CO2 with the C end bound to the Ru underneath. The resulting metal carboxylate (Ru-COO) can be desorbed by STM manipulation. A low activation (0.2 eV) and high binding (-2.2 eV) energy confirm a strong reaction between CO and regular surface sites of Sr$_3$Ru$_2$O$_7$; likely, this reaction causes the "UHV aging effect" reported for this and other perovskite oxides.

cond-mat.mtrl-sci↗

arXiv2018

Well-Ordered In Adatoms at the In$_2$O$_3$(111) Surface Created by Fe Deposition

Metal deposition on oxide surfaces usually results in adatoms, clusters, or islands of the deposited material, where defects in the surface often act as nucleation centers. Here an alternate configuration is reported. After the vapor deposition of Fe on the In$_2$O$_3$(111) surface at room temperature, ordered adatoms are observed with scanning tunneling microscopy. These are identical to the In adatoms that form when the sample is reduced by heating in ultrahigh vacuum. Density functional theory (DFT) calculations confirm that Fe interchanges with In in the topmost layer, pushing the excess In atoms to the surface where they arrange as a well-ordered adatom array.

cond-mat.mtrl-sci↗

arXiv2018

Sexiphenyl on Cu(100): nc-AFM tip functionalization and identification

The contrast obtained in scanning tunneling microscopy (STM) and atomic force microscopy (AFM) images is determined by the tip termination and symmetry. Functionalizing the tip with a single metal atom, CO molecule or organic species has been shown to provide high spatial resolution and insights into tip-surface interactions. A topic where this concept is utilized is the adsorption of organic molecules at surfaces. With this work we aim to contribute to the growing database of organic molecules that allow assignment by intra-molecular imaging. We investigated the organic molecule para-sexiphenyl (C36H26, 6P) on Cu(100) using low-temperature STM and non-contact AFM with intra-molecular resolution. In the sub-monolayer regime we find a planar and flat adsorption with the 6P molecules rotated 10° off the <010> directions. In this configuration, four of the six phenyl rings occupy almost equivalent sites on the surface. The 6P molecules are further investigated with CO- functionalized tips, in comparison to a single-atom metal and 6P-terminated tip. We also show that the procedure of using adsorbed CO to characterize tips introduced by Hofmann et al. Phys. Rev. B 112 (2014) 066101 is useful when the tip is terminated with an organic molecule.

cond-mat.mtrl-sci↗

arXiv2018

Focused ion beam direct writing of magnetic patterns with controlled structural and magnetic properties

Focused ion beam irradiation of metastable Fe$_{78}$Ni$_{22}$ thin films grown on Cu(100) substrates is used to create ferromagnetic, body-centered-cubic patterns embedded into paramagnetic, face-centered-cubic surrounding. The structural and magnetic phase transformation can be controlled by varying parameters of the transforming gallium ion beam. The focused ion beam parameters as ion dose, number of scans, and scanning direction can be used not only to control a degree of transformation, but also to change the otherwise four-fold in-plane magnetic anisotropy into the uniaxial anisotropy along specific crystallographic direction. This change is associated with a preferred growth of specific crystallographic domains. The possibility to create magnetic patterns with continuous magnetization transitions and at the same time to create patterns with periodical changes in magnetic anisotropy makes this system an ideal candidate for rapid prototyping of a large variety of nanostructured samples. Namely spin-wave waveguides and magnonic crystals can be easily combined into complex devices in a single fabrication step.

physics.app-ph↗

arXiv2018

Water Agglomerates on Fe3O4(001)

Determining the structure of water adsorbed on solid surfaces is a notoriously difficult task, and pushes the limits of experimental and theoretical techniques. Here, we follow the evolution of water agglomerates on Fe3O4(001); a complex mineral surface relevant in both modern technology and the natural environment. Strong OH-H2O bonds drive the formation of partially-dissociated water dimers at low coverage, but a surface reconstruction restricts the density of such species to one per unit cell. The dimers act as an anchor for further water molecules as the coverage increases, leading first to partially-dissociated water trimers, and then to a ring-like, hydrogen-bonded network that covers the entire surface. Unraveling this complexity requires the concerted application of several state-of-the-art methods. Quantitative temperature programmed desorption (TPD) reveals the coverage of stable structures, monochromatic x-ray photoelectron spectroscopy (XPS) shows the extent of partial dissociation, and non-contact Atomic Force Microscopy (AFM) using a CO-functionalized tip provides a direct view of the agglomerate structure. Together, these data provide a stringent test of the minimum energy configurations determined via a van der Waals density functional theory (DFT)-based genetic search.

physics.chem-ph↗

arXiv2017

Construction and evaluation of an ultrahigh-vacuum-compatible sputter deposition source

A sputter deposition source for use in ultrahigh vacuum (UHV) is described and some properties of the source are analyzed. The operating principle is based on the design developed by Mayr et al. [Rev. Sci. Instrum. 84, 094103 (2013)], where electrons emitted from a filament ionize argon gas, and the Ar$^+$ ions are accelerated to the target. In contrast to the original design, two grids are used to direct a large fraction of the Ar$^+$ ions to the target, and the source has a housing cooled by liquid nitrogen to reduce contaminations. The source has been used for deposition of zirconium, a material that is difficult to evaporate in standard UHV evaporators. At an Ar pressure of $9\times 10^{-6}$ mbar in the UHV chamber and moderate emission current, a highly reproducible deposition rate of $\approx 1$ monolayer in 250 s was achieved at the substrate (at a distance of $\approx 50$ mm from the target). Higher deposition rates are easily possible. X-ray photoelectron spectroscopy shows a high purity of the deposited films. Depending on the grid voltages, the substrate gets mildly sputtered by Ar$^+$ ions; in addition, the substrate is also reached by electrons from the negatively biased sputter target.

cond-mat.mtrl-sci↗

arXiv2017

An Atomic-Scale View of CO and H2 Oxidation on a Pt-Fe3O4 Model Catalyst

Metal-support interactions are frequently invoked to explain the enhanced catalytic activity of metal nanoparticles dispersed over reducible metal-oxide supports, yet the atomic scale mechanisms are rarely known. Here, we use scanning tunneling microscopy to study a Pt1-6/Fe3O4 model catalyst exposed to CO, H2, O2, and mixtures thereof, at 550 K. CO extracts lattice oxygen at the cluster perimeter to form CO2, creating large holes in the metal-oxide surface. H2 and O2 dissociate on the metal clusters and spill over onto the support. The former creates create surface hydroxyl groups, which react with the support to desorb water, while atomic oxygen reacts with Fe from the bulk to create new Fe3O4(001) islands. The presence of the Pt is crucial because it catalyses reactions that already occur on the bare iron-oxide surface, but at higher temperatures.

physics.chem-ph↗

arXiv2016

A Multi-Technique Study of $CO_2$ Adsorption on $Fe_3$$O_4$ Magnetite

The adsorption of $CO_2$ on the $Fe_3$$O_4$(001)-($\sqrt{2}$ $\times$ $\sqrt{2}$)R45° surface was studied experimentally using temperature programmed desorption (TPD), electron spectroscopies (UPS and XPS), and scanning tunneling microscopy (STM). $CO_2$ binds most strongly at defects related to Fe2+ including antiphase domain boundaries in the surface reconstruction and above incorporated Fe interstitials. On the pristine surface, $CO_2$ adsorbs molecularly at fivefold-coordinated Fe3+ sites with a binding energy of 0.4 eV. Above a coverage of 4 molecules per ($\sqrt{2}$ $\times$ $\sqrt{2}$)R45° unit cell, further adsorption results in a compression of the first monolayer up to a density approaching that of a $CO_2$ ice layer. Surprisingly, desorption of the second monolayer occurs at a lower temperature ($\approx$ 84 K) than $CO_2$ multilayers ($\approx$ 88 K), suggestive of a metastable phase or diffusion-limited island growth. The paper also discusses design considerations for a vacuum system optimized to study the surface chemistry of metal oxide single crystals, including the calibration and characterisation of a molecular beam source for quantitative TPD measurements.

cond-mat.mtrl-sci↗

arXiv2016

The role of surface defects in the adsorption of methanol on Fe3O4(001)

The adsorption of methanol (CH3OH) at the Fe3O4(001)-c(2x2) surface was studied using X-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM), and temperature-programmed desorption (TPD). CH3OH adsorbs exclusively at surface defects sites at room temperature to form hydroxyl groups and methoxy (CH3O) species. Active sites are identified as step edges, iron adatoms, antiphase domain boundaries in the c(2x2) reconstruction, and above Fe atoms incorporated in the subsurface. In TPD, recombinative desorption is observed around 300 K, and a disproportionation reaction to form methanol and formaldehyde occurs at 470 K.

cond-mat.mtrl-sci↗

arXiv2016

Fe3O4(110)-(1x3) Revisited: Periodic (111) Nano-Facets

The structure of the Fe3O4(110)-(1x3) surface was studied with scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), and reflection high energy electron diffraction (RHEED). The so-called one-dimensional reconstruction is characterised by bright rows that extend hundreds of nanometers in the [1-10] direction and have a periodicity of 2.52 nm in [001] in STM. It is concluded that this reconstruction is the result of a periodic faceting to expose {111}-type planes with a lower surface energy.

cond-mat.mtrl-sci↗