arXiv subjects

Michael Sordet

Publications and source records attributed to Michael Sordet.

6 recordsLinked to original sources

arXiv2026

RISTRETTO: Assembly and Testing of the Seven-spaxel, High-resolution, Diffraction-limited Spectrograph

The RISTRETTO project aims at the direct detection of the reflected light of extra-solar planets to measure albedos and detect possible biosignatures, using the high-contrast / high-resolution method. We report on the assembly, lab-testing and on-sky testing of the seven-spaxel high-resolution single-mode spectrograph which was built ahead of the rest of the instrument. The spectrograph is a high resolution echelle spectrograph build for high spectral fidelity being uder vacuum and thermally controlled. Once the assembly has been completed we had the chance to test it on sky using OHP 1.52 m telescope using the PAPYRUS AO system for injection in our spectrograph.

astro-ph.IM↗

arXiv2025

NIRPS joining HARPS at ESO 3.6 m. On-sky performance and science objectives

The Near-InfraRed Planet Searcher (NIRPS) is a high-resolution, high-stability near-infrared (NIR) spectrograph equipped with an AO system. Installed on the ESO 3.6-m telescope, it was developed to enable radial velocity (RV) measurements of low-mass exoplanets around M dwarfs and to characterise exoplanet atmospheres in the NIR. This paper provides a comprehensive design overview and characterisation of the NIRPS instrument, reporting on its on-sky performance, and presenting its GTO programme. The instrument started its operations on 1 Apr 2023 after intensive on-sky testing phases. The spectral range continuously covers the Y, J, and H bands from 972.4 to 1919.6 nm. The thermal control system maintains 1 mK stability over several months. The NIRPS AO-assisted fibre link improves coupling efficiency and offers a unique high-angular resolution capability with a fibre acceptance of only 0.4 arcsec. A high spectral resolving power of 90 000 and 75 000 is provided in HA and HE modes, respectively. The overall throughput from the top of the atmosphere to the detector peaks at 13 percent. The RV precision, measured on the bright star Proxima with a known exoplanetary system, is 77 cm/s. NIRPS and HARPS can be used simultaneously, offering unprecedented spectral coverage for spectroscopic characterisation and stellar activity mitigation. Modal noise can be aptly mitigated by the implementation of fibre stretchers and AO scanning mode. Initial results confirm that NIRPS opens new possibilities for RV measurements, stellar characterisation, and exoplanet atmosphere studies with high precision and high spectral fidelity. NIRPS demonstrated stable RV precision at the level of 1 m/s over several weeks. The instrument high throughput offers a notable improvement over previous spectrographs, enhancing our ability to detect small exoplanets.

astro-ph.IM↗

arXiv2024

ANDES, the high-resolution spectrograph for the ELT: RIZ Spectrograph preliminary design

We present here the preliminary design of the RIZ module, one of the visible spectrographs of the ANDES instrument 1. It is a fiber-fed high-resolution, high-stability spectrograph. Its design follows the guidelines of successful predecessors such as HARPS and ESPRESSO. In this paper we present the status of the spectrograph at the preliminary design stage. The spectrograph will be a warm, vacuum-operated, thermally controlled and fiber-fed echelle spectrograph. Following the phase A design, the huge etendue of the telescope will be reformed in the instrument with a long slit made of smaller fibers. We discuss the system design of the spectrographs system.

astro-ph.IM↗

arXiv2024

RISTRETTO: Manufacturing of a single-mode visible high resolution spectrograph

The Spectrograph of the RISTRETTO instrument is now currently being manufactured. RISTETTO is an instrument designed to detect and characterize the reflected light of nearby exoplanets. It combines high contrast imaging and high resolution spectroscopy to detect the light of exoplanets. The high resolution spectrograph subject of this paper uses the doppler effect to disentangle the planetary signal from the stellar light leaks. In this paper we describe the final design of the spectrograph and report the status of its construction. The RISTRETTO spectrograph has seven diffraction limited spaxels. The spectrograph's resolution is 130000 in the 620-840 nm band. It is designed in a similar way as HARPS and ESPRESSO, being a warm, thermally controlled spectrograph under vacuum. It is designed to be compact and self contained so that it could be installed on different telescopes. It is however tailored to be installed on a nasmyth platform of a VLT telescope. We present updates to the design and the manufacturing of the instrument. In particular we present the performance of the thermal enclosure.

astro-ph.IM↗

arXiv2022

RISTRETTO: Seven Spaxels Single Mode Spectrograph Design

The RISTRETTO project is aiming to build an instrument that will detect the reflected light from close-by exoplanet. It is a two stage instrument: An extreme AO system in the visible, followed by a seven spaxel single mode High resolution Spectrograph. In this paper we present the design of this spectrograph: a classical echelle spectrograph fed with single mode fibers. Standard single mode fibers have been chosen and are forming a long tilted slit in order to have the right order spacing on the detector. The instrument will be under vacuum and thermally controlled in order to make it stable.

astro-ph.IM↗

arXiv2020

The CHEOPS mission

The CHaracterising ExOPlanet Satellite (CHEOPS) was selected in 2012, as the first small mission in the ESA Science Programme and successfully launched in December 2019. CHEOPS is a partnership between ESA and Switzerland with important contributions by ten additional ESA Member States. CHEOPS is the first mission dedicated to search for transits of exoplanets using ultrahigh precision photometry on bright stars already known to host planets. As a follow-up mission, CHEOPS is mainly dedicated to improving, whenever possible, existing radii measurements or provide first accurate measurements for a subset of those planets for which the mass has already been estimated from ground-based spectroscopic surveys and to following phase curves. CHEOPS will provide prime targets for future spectroscopic atmospheric characterisation. Requirements on the photometric precision and stability have been derived for stars with magnitudes ranging from 6 to 12 in the V band. In particular, CHEOPS shall be able to detect Earth-size planets transiting G5 dwarf stars in the magnitude range between 6 and 9 by achieving a photometric precision of 20 ppm in 6 hours of integration. For K stars in the magnitude range between 9 and 12, CHEOPS shall be able to detect transiting Neptune-size planets achieving a photometric precision of 85 ppm in 3 hours of integration. This is achieved by using a single, frame-transfer, back-illuminated CCD detector at the focal plane assembly of a 33.5 cm diameter telescope. The 280 kg spacecraft has a pointing accuracy of about 1 arcsec rms and orbits on a sun-synchronous dusk-dawn orbit at 700 km altitude. The nominal mission lifetime is 3.5 years. During this period, 20% of the observing time is available to the community through a yearly call and a discretionary time programme managed by ESA.

astro-ph.IM↗