arXiv subjects

Michal Banaszak

Publications and source records attributed to Michal Banaszak.

6 recordsLinked to original sources

arXiv2019

Flux and storage of energy in non-equilibrium, stationary states

Systems kept out of equilibrium in stationary states by an external source of energy store an energy $ΔU=U-U_0$. $U_0$ is the internal energy at equilibrium state, obtained after the shutdown of energy input. We determine $ΔU$ for two model systems: ideal gas and Lennard-Jones fluid. $ΔU$ depends not only on the total energy flux, $J_U$, but also on the mode of energy transfer into the system. We use three different modes of energy transfer where: the energy flux per unit volume is (i) constant; (ii) proportional to the local temperature (iii) proportional to the local density. We show that $ΔU /J_U=τ$ is minimized in the stationary states formed in these systems, irrespective of the mode of energy transfer. $τ$ is the characteristic time scale of energy outflow from the system immediately after the shutdown of energy flux. We prove that $τ$ is minimized in stable states of the Rayleigh-Benard cell.

cond-mat.stat-mech↗

arXiv2017

Monte Carlo Study of Patchy Nanostructures Self-Assembled from a Single Multiblock Chain

We present a lattice Monte Carlo simulation for a multiblock copolymer chain of length N=240 and microarchitecture $(10-10)_{12}$.The simulation was performed using the Monte Carlo method with the Metropolis algorithm. We measured average energy, heat capacity, the mean squared radius of gyration, and the histogram of cluster count distribution. Those quantities were investigated as a function of temperature and incompatibility between segments, quantified by parameter ω. We determined the temperature of the coil-globule transition and constructed the phase diagram exhibiting a variety of patchy nanostructures. The presented results yield a qualitative agreement with those of the off-lattice Monte Carlo method reported earlier, with a significant exception for small incompatibilities,ω, and low temperatures, where 3-cluster patchy nanostructures are observed in contrast to the 2-cluster structures observed for the off-lattice $(10-10)_{12}$ chain. We attribute this difference to a considerable stiffness of lattice chains in comparison to that of the off-lattice chains.

cond-mat.soft↗

arXiv2014

Intra-Globular Structures in Multiblock Copolymer Chains from a Monte Carlo Simulation

Multiblock copolymer chains in implicit nonselective solvents are studied by Monte Carlo method which employs a parallel tempering algorithm. Chains consisting of 120 $A$ and 120 $B$ monomers, arranged in three distinct microarchitectures: $(10-10)_{12}$, $(6-6)_{20}$, and $(3-3)_{40}$, collapse to globular states upon cooling, as expected. By varying both the reduced temperature $T^*$ and compatibility between monomers $ω$, numerous intra-globular structures are obtained: diclusters (handshake, spiral, torus with a core, etc.), triclusters, and $n$-clusters with $n>3$ (lamellar and other), which are reminiscent of the block copolymer nanophases for spherically confined geometries. Phase diagrams for various chains in the $(T^*, ω)$-space are mapped. The structure factor $S(k)$, for a selected microarchitecture and $ω$, is calculated. Since $S(k)$ can be measured in scattering experiments, it can be used to relate simulation results to an experiment. Self-assembly in those systems is interpreted in term of competition between minimization of the interfacial area separating different types of monomers and minimization of contacts between chain and solvent. Finally, the relevance of this model to the protein folding is addressed.

cond-mat.soft↗

arXiv2014

Parallel-Tempering Monte-Carlo Simulation with Feedback-Optimized Algorithm Applied to a Coil-to-Globule Transition of a Lattice Homopolymer

We present a study of the parallel tempering (replica exchange) Monte Carlo method, with special focus on the feedback-optimized parallel tempering algorithm, used for generating an optimal set of simulation temperatures. This method is applied to a lattice simulation of a homopolymer chain undergoing a coil-to-globule transition upon cooling. We select the optimal number of replicas for different chain lengths, N = 25, 50 and 75, using replica's round-trip time in temperature space, in order to determine energy, specific heat, and squared end-to-end distance of the hopolymer chain for the selected temperatures. We also evaluate relative merits of this optimization method.

cond-mat.stat-mech↗

arXiv2014

Heuristic Monte Carlo Method Applied to Cooperative Motion Algorithm for Binary Lattice Fluid

The Cooperative Motion Algorithm is an efficient lattice method to simulate dense polymer systems and is often used with two different criteria to generate a Markov chain in the configuration space. While the first method is the well-established Metropolis algorithm, the other one is an heuristic algorithm which needs justification. As an introductory step towards justification for the 3D lattice polymers, we study a simple system which is the binary equimolar uid on a 2D triangular lattice. Since all lattice sites are occupied only selected type of motions are considered, such the vacancy movements, swapping neighboring lattice sites (Kawasaki dynamics) and cooperative loops. We compare both methods, calculating the energy as well as heat capacity as a function of temperature. The critical temperature, which was determined using the Binder cumulant, was the same for all methods with the simulation accuracy and in agreement with the exact critical temperature for the Ising model on the 2D triangular lattice. In order to achieve reliable results at low temperatures we employ the parallel tempering algorithm which enables simultaneous simulations of replicas of the system in a wide range of temperatures.

cond-mat.stat-mech↗

arXiv2014

Phase Diagram of Diblock Copolymer Melt in Dimension d=5

Using the self-consistent field theory (SCFT) in spherical unit cells of various dimensionalities, D, a phase diagram of a diblock, A-b-B, is calculated in 5 dimensional space, d = 5. This is an extension of a previous work for d = 4. The phase diagram is parameterized by the chain composition, f, and incompatibility between A and B , quantified by the product \c{hi} N. We predict 5 stable nanophases: layers, cylinders, 3 D spherical cells, 4D spherical cells, and 5D spherical cells. In the strong segregation limit, that is for large \c{hi}N, the order-order transition compositions are determined by the strong segregation theory (SST) in its simplest form. While the predictions of the SST theory are close to the corresponding SCFT extrapolations for d=4, the extrapolations for d=5 significantly differ from them. We find that the S5 nanophase is stable in a narrow strip between the ordered S4 nanophase and the disordered phase. The calculated order-disorder transition lines depend weakly on d, as expected.

cond-mat.soft↗