arXiv subjects

Michel Calame

Publications and source records attributed to Michel Calame.

At least 19 recordsLinked to original sources

arXiv2026

When Cubic Is Not Isotropic: Phonon-Exciton Decoupling in CuInSnS$_4$ Single Crystals

Atomic-scale disorder can create hidden optical anisotropy even in crystals that are structurally cubic on average. Here, we show that CuInSnS$_4$ single crystals host locally symmetry-broken environments arising from intrinsic In/Sn cation disorder, which affect vibrational and excitonic properties in markedly different ways. Combining polarization- and temperature-dependent Raman spectroscopy, infrared near-field microscopy, steady-state and time-resolved photoluminescence, and first-principles calculations, we find that phonons remain largely symmetry-averaged and locally homogeneous on the nanoscale. In contrast, photoluminescence reveals a lower-energy band-tail emission with pronounced polarization anisotropy following a well-defined angular symmetry, highlighting the strong sensitivity of excitonic states to local symmetry breaking. This phonon-exciton decoupling reveals that intrinsic disorder can localize excitons while preserving vibrational coherence and dielectric homogeneity, thereby opening new opportunities for polarization-sensitive light sources, anisotropic photodetectors, and exciton-based optical functionalities even in nominally cubic multinary semiconductors.

cond-mat.mtrl-sci↗

arXiv2025

The Comparison of Colloidal PbS QD Photoconductors and Hybrid Phototransistors

The simplicity in the fabrication of photoconductors makes them a valuable choice to investigate optoelectronic properties of colloidal quantum dot (cQD) films. Lateral photoconductors generally require a large size, in the mm2, and are limited in operation speed due to the presence of trapping sites. In contrast, hybrid phototransistors are fabricated in the um2 scale and benefit from such trapping sites, allowing the measurement of low light levels in the nW/cm2. The question, however, arises whether high responsivity values are required for the detection of low light levels or the compatible detectivity of photoconductors is sufficient. Here, we directly compare photoconductors and hybrid phototransistors with an identical EDT-treated PbS cQD film. We highlight that a comparable D* is not enough for the purpose of measuring low light levels, as the resulting photocurrents need to be readily accessible. Furthermore, we also showcase temperature-activated photocurrent dynamics resulting in a negative photocurrent (NPC) effect. This NPC simultaneously improves the frequency bandwidth and photocurrent, enabling operation speeds up to 100 kHz.

cond-mat.mtrl-sci↗

arXiv2025

Electron-beam-induced Contactless Manipulation of Interlayer Twist in van der Waals Heterostructures

The ability to dynamically control the relative orientation of layers in two dimensional (2D) van der Waals (vdW) heterostructures represents a critical step toward the realization of reconfigurable nanoscale devices. Existing actuation methods often rely on mechanical contact, complex architectures, or extreme operating conditions, which limit their applicability and scalability. In this work, we present a proof-of-concept demonstration of contactless electrostatic actuation based on electron-beam-induced charge injection. By locally charging an insulating hexagonal boron nitride (hBN) flake on an electrically grounded graphene layer, we create an interfacial electric field that generates in-plane electrostatic torque and induces angular displacement. We validate the induced rotation through in-situ scanning electron microscopy (SEM) and twist-dependent Raman spectroscopy.

cond-mat.mes-hall↗

arXiv2025

Layer-Dependent Interfacial Coupling and Exciton Pinning in WSe2/Graphene Heterostructures

Understanding interfacial interactions in two-dimensional heterostructures is crucial for their implementation in future optoelectronic and quantum technologies. Here, we investigate interactions between WSe2 and graphene by comparing 1-5 layer MOCVD-grown WSe2 on graphene/SiC with exfoliated WSe2 on SiO2/Si using Raman and photoluminescence spectroscopy combined with atomic force microscopy. Growth on graphene induces persistent compressive strain of approximately 0.2% and reduces the interlayer WSe2 distance by 0.11 +/- 0.05 Angstrom. Interfacial disorder is strongest in the WSe2 layer directly contacting graphene, with an effective Urbach energy of approximately 20 meV, decreasing to approximately 16 meV upon addition of a second layer and remaining similar for thicker films. Increasing WSe2 thickness leads to progressive electron transfer from graphene to WSe2, resulting in p-type doping of graphene and n-type doping of WSe2, with the graphene hole density increasing from approximately 0.4 x 10^13 cm^-2 for 1L to 0.8 x 10^13 cm^-2 for 5L. The A- and B-exciton energies of WSe2 remain nearly pinned on graphene, in contrast to their pronounced thickness-dependent shifts on SiO2/Si. We show that this pinning arises primarily from electronic screening and compressive strain, with smaller contributions from charge transfer and modified interlayer coupling. These findings establish graphene as an active interface for controlling excitonic properties in scalable van der Waals heterostructures.

cond-mat.mtrl-sci↗

arXiv2025

Optimized Synthesis and Device Integration of Long 17-Atom-Wide Armchair Graphene Nanoribbons

Seventeen-carbon-atom-wide armchair graphene nanoribbons (17-AGNRs) are promising candidates for high-performance electronic devices due to their narrow electronic bandgap. Atomic precision in edge structure and width control is achieved through a bottom-up on-surface synthesis (OSS) approach from tailored molecular precursors in ultra-high vacuum (UHV). This synthetic protocol must be optimized to meet the structural requirements for device integration, with ribbon length being the most critical parameter. Here, we report optimized OSS conditions that produce 17-AGNRs with an average length of approximately 17 nm. This length enhancement is achieved through a gradual temperature ramping during an extended annealing period, combined with a template-like effect driven by monomer assembly at high surface coverage. The resulting 17-AGNRs are comprehensively characterized in UHV using scanning probe techniques and Raman spectroscopy. Raman measurements following substrate transfer enabled the characterization of the length distribution of GNRs on the device substrate and confirmed their stability under ambient conditions and harsh chemical environments, including acid vapors and etchants. The increased length and ambient stability of the 17-AGNRs lead to their reliable integration into device architectures. As a proof of concept, we integrate 17-AGNRs into field-effect transistors (FET) with graphene electrodes and confirm that electronic transport occurs through the GNRs. This work demonstrates the feasibility of integrating narrow-bandgap GNRs into functional devices and contributes to advancing the development of carbon-based nanoelectronics.

cond-mat.mes-hall↗

arXiv2025

On Tailoring Structural and Optoelectronic Properties of TiO2 Thin Films Synthesized via 'Room' Temperature High Power Impulse Magnetron Sputtering (HiPIMS)

Titanium dioxide (TiO2) is a key material in optoelectronic and energy conversion technologies, including solar cells and photocatalysis. However, integrating TiO2 into flexible or temperature-sensitive devices requires deposition techniques that avoid high-temperature processing while maintaining control over both phase composition and crystallinity. In this work, we demonstrate the synthesis of nanocrystalline TiO2 thin films using High Power Impulse Magnetron Sputtering (HiPIMS) at nearroom temperature. By systematically varying total pressure and oxygen flow, we achieve tunable anatase to rutile phase ratios and control over crystalline quality, as evidenced by Raman and photoluminescence trends. The observed optical trends in both refractive index and emission are directly linked to the underlying structural evolution, with compositional analysis verifying stoichiometric consistency across all deposition conditions. Our findings establish HiPIMS as a powerful low temperature method for tailoring TiO2 thin films and enabling their application in flexible photovoltaics, photoelectrochemical water splitting, and other energy-related systems.

cond-mat.mtrl-sci↗

arXiv2024

The role of precursor coverage in the synthesis and substrate transfer of graphene nanoribbons

Graphene nanoribbons (GNRs) with atomically precise widths and edge topologies have well-defined band gaps that depend on ribbon dimensions, making them ideal for room-temperature switching applications like field-effect transistors (FETs). For efficient device integration, it is crucial to optimize growth conditions to maximize GNR length and, consequently, device yield. Here, we investigate the growth and alignment of 9-atom-wide armchair graphene nanoribbons (9-AGNRs) on a vicinal gold substrate, Au(788), with varying molecular precursor doses (PD) and, therefore, different resulting GNR coverages. Our investigation reveals that GNR growth location on the Au(788) substrate is coverage-dependent. Furthermore, scanning tunneling microscopy shows a strong correlation between the GNR length evolution and both the PD and the GNR growth location on the substrate. Employing Raman spectroscopy, we analyze samples with eight different PDs on Au(788). We find that GNR alignment improves with length, achieving near-perfect alignment with an average GNR length of ~40 nm for GNRs growing solely at Au(788) step edges. To fully exploit GNR properties in device architectures, GNRs need to be transferred from the gold to semiconducting or insulating substrates. Upon substrate transfer, samples with higher PD present systematically better alignment preservation and less surface disorder, which we attribute to reduced GNR mobility during the transfer process. PD also affects the substrate transfer success rate, with higher success rates observed for samples with higher GNR coverages (77%) compared to those with lower GNR coverages (53%). Our findings characterize the important relationship between precursor dose, GNR length, alignment quality, and surface disorder during GNR growth and upon substrate transfer, offering crucial insights for the further development of GNR-based nanoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2024

AFM-IR of EHD-Printed PbS Quantum Dots: Quantifying Ligand Exchange at the Nanoscale

Colloidal quantum dots (cQDs) recently emerged as building blocks for semiconductor materials with tuneable properties. Electro-hydrodynamic printing can be used to obtain sub-micrometre patterns of cQDs without elaborate and aggressive photolithography steps. Post-deposition ligand exchange is necessary for the introduction of new functionalities into cQD solids. However, achieving a complete bulk exchange is challenging and conventional infrared spectroscopy lacks the required spatial resolution. Infrared nanospectroscopy (AFM-IR) enables quantitative analysis of the evolution of vibrational signals and structural topography on the nano-metre scale upon ligand substitution on lead sulphide (PbS) cQDs. A solution of ethane-dithiol in acetonitrile demonstrated rapid (~60 s) and controllable exchange of approximately 90% of the ligands, encompassing structures up to ~800 nm in thickness. Prolonged exposures (>1 h) led to the degradation of the microstructures, with a systematic removal of cQDs regulated by surface-to-bulk ratios and solvent interactions. This study establishes a method for the development of devices through a combination of tuneable photoactive materials, additive manufacturing of microstructures, and their quantitative nanometre-scale analysis.

physics.app-ph↗

arXiv2023

Scaling of Hybrid QDs-Graphene Photodetectors to Subwavelength Dimension

Emerging colloidal quantum dot (cQD) photodetectors currently challenge established state-of-the-art infrared photodetectors in response speed, spectral tunability, simplicity of solution processable fabrication, and integration onto curved or flexible substrates. Hybrid phototransistors based on 2D materials and cQDs, in particular, are promising due to their inherent photogain enabling direct photosignal enhancement. The photogain is sensitive to both, measurement conditions and photodetector geometry. This makes the cross-comparison of devices reported in the literature rather involved. Here, the effect of device length L and width W scaling to subwavelength dimensions (sizes down to 500 nm) on the photoresponse of graphene-PbS cQD phototransistors was experimentally investigated. Photogain and responsivity were found to scale with 1/LW, whereas the photocurrent and specific detectivity were independent of geometrical parameters. The measurements were performed at scaled bias voltage conditions for comparable currents. Contact effects were found to limit the photoresponse for devices with L < 3 {\mu}m. The relation of gate voltage, bias current, light intensity, and frequency on the photoresponse was investigated in detail, and a photogating efficiency to assess the cQD-graphene interface is presented. In particular, the specific detectivity values in the range between 10^8 to 10^9 Jones (wavelength of 1550 nm, frequency 6 Hz, room temperature) were found to be limited by the charge transfer across the photoactive interface.

cond-mat.mtrl-sci↗

arXiv2023

On-surface synthesis and characterization of Teranthene and Hexanthene: Ultrashort graphene nanoribbons with mixed armchair and zigzag edges

Graphene nanoribbons (GNRs) exhibit a broad range of physicochemical properties that critically depend on their width and edge topology. While the chemically stable GNRs with armchair edges (AGNRs) are semiconductors with width-tunable band gap, GNRs with zigzag edges (ZGNRs) host spin-polarized edge states, which renders them interesting for applications in spintronic and quantum technologies. However, these states significantly increase their reactivity. For GNRs fabricated via on-surface synthesis under ultrahigh vacuum conditions on metal substrates, the expected reactivity of zigzag edges is a serious concern in view of substrate transfer and device integration under ambient conditions, but corresponding investigations are scarce. Using 10-bromo-9,9':10',9''-teranthracene as a precursor, we have thus synthesized hexanthene (HA) and teranthene (TA) as model compounds for ultrashort GNRs with mixed armchair and zigzag edges, characterized their chemical and electronic structure by means of scanning probe methods, and studied their chemical reactivity upon air exposure by Raman spectroscopy. We present a detailed identification of molecular orbitals and vibrational modes, assign their origin to armchair or zigzag edges, and discuss the chemical reactivity of these edges based on characteristic Raman spectral features.

cond-mat.mtrl-sci↗

arXiv2023

Quantifying Alignment and Quality of Graphene Nanoribbons: A Polarized Raman Spectroscopy Approach

Graphene nanoribbons (GNRs) are atomically precise stripes of graphene with tunable electronic properties, making them promising for room-temperature switching applications like field-effect transistors (FETs). However, challenges persist in GNR processing and characterization, particularly regarding GNR alignment during device integration. In this study, we quantitatively assess the alignment and quality of 9-atom-wide armchair graphene nanoribbons (9-AGNRs) on different substrates using polarized Raman spectroscopy. Our approach incorporates an extended model that describes GNR alignment through a Gaussian distribution of angles. We not only extract the angular distribution of GNRs but also analyze polarization-independent intensity contributions to the Raman signal, providing insights into surface disorder on the growth substrate and after substrate transfer. Our findings reveal that low-coverage samples grown on Au(788) exhibit superior uniaxial alignment compared to high-coverage samples, attributed to preferential growth along step edges, as confirmed by scanning tunneling microscopy (STM). Upon substrate transfer, the alignment of low-coverage samples deteriorates, accompanied by increased surface disorder. On the other hand, high-coverage samples maintain alignment and exhibit reduced disorder on the target substrate. Our extended model enables a quantitative description of GNR alignment and quality, facilitating the development of GNR-based nanoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2023

Nanoscale electronic transport at graphene/pentacene van der Waals interface

We report a study on the relationship between structure and electron transport properties of nanoscale graphene/pentacene interfaces. We fabricated graphene/pentacene interfaces from 10-30 nm thick needle-like pentacene nanostructures down to two-three layers (2L-3L) dendritic pentacene islands, and we measured their electron transport properties by conductive atomic force microscopy (C-AFM). The energy barrier at the interfaces, i.e. the energy position of the pentacene highest occupied molecular orbital (HOMO) with respect to the Fermi energy of the graphene and the C-AFM metal tip, are determined and discussed with the appropriate electron transport model (double Schottky diode model and Landauer-Buttiker model, respectively) taking into account the voltage-dependent charge doping of graphene. In both types of samples, the energy barrier at the graphene/pentacene interface is slightly larger than that at the pentacene/metal tip interface, resulting in 0.47-0.55 eV and 0.21-0.34 eV, respectively, for the 10-30 nm thick needle-like pentacene islands, and in 0.92-1.44 eV and 0.67-1.05 eV, respectively, for the 2L-3L thick dendritic pentacene nanostructures. We attribute this difference to the molecular organization details of the pentacene/graphene heterostructures, with pentacene molecules lying flat on the graphene in the needle-like pentacene nansotructures, while standing upright in 2L-3L dendritic islands, as observed from Raman spectroscopy.

cond-mat.mes-hall↗

arXiv2023

Exciton-assisted electron tunneling in van der Waals heterostructures

The control of elastic and inelastic electron tunneling relies on materials with well defined interfaces. Van der Waals materials made of two-dimensional constituents form an ideal platform for such studies. Signatures of acoustic phonons and defect states have been observed in current-to-voltage ($I-V$) measurements. These features can be explained by direct electron-phonon or electron-defect interactions. Here, we use a novel tunneling process that involves excitons in transition metal dichalcogenides (TMDs). We study tunnel junctions consisting of graphene and gold electrodes separated by hexagonal boron nitride (hBN) with an adjacent TMD monolayer and observe prominent resonant features in $I-V$ measurements. These resonances appear at bias voltages that correspond to TMD exciton energies. By placing the TMD outside of the tunneling pathway, we demonstrate that this phonon-exciton mediated tunneling process does not require any charge injection into the TMD. This work demonstrates the appearance of optical modes in electrical transport measurements and introduces a new functionality for optoelectronic devices based on van der Waals materials.

cond-mat.mes-hall↗

arXiv2022

Electronic Poiseuille Flow in Hexagonal Boron Nitride Encapsulated Graphene FETs

Electron-electron interactions in graphene are sufficiently strong to induce a correlated and momentum-conserving flow such that charge carriers behave similarly to the Hagen-Poiseuille flow of a classical fluid. In the current work, we investigate the electronic signatures of such a viscous charge flow in high-mobility graphene FETs. In two complementary measurement schemes, we monitor differential resistance of graphene for different channel widths and for different effective electron temperatures. By combining both approaches, the presence of viscous effects is verified in a temperature range starting from 178 K and extending up to room temperature. Our experimental findings are supported by finite element calculations of the graphene channel, which also provide design guidelines for device geometries that exhibit increased viscous effects. The presence of viscous effects near room temperature opens up avenues for functional hydrodynamic devices such as geometric rectifiers like a Tesla valve and charge amplifiers based on electronic Venturi effect.

cond-mat.mes-hall↗

arXiv2022

Tunable quantum dots from atomically precise graphene nanoribbons using a multi-gate architecture

Atomically precise graphene nanoribbons (GNRs) are increasingly attracting interest due to their largely modifiable electronic properties, which can be tailored by controlling their width and edge structure during chemical synthesis. In recent years, the exploitation of GNR properties for electronic devices has focused on GNR integration into field-effect-transistor (FET) geometries. However, such FET devices have limited electrostatic tunability due to the presence of a single gate. Here, we report on the device integration of 9-atom wide armchair graphene nanoribbons (9-AGNRs) into a multi-gate FET geometry, consisting of an ultra-narrow finger gate and two side gates. We use high-resolution electron-beam lithography (EBL) for defining finger gates as narrow as 12 nm and combine them with graphene electrodes for contacting the GNRs. Low-temperature transport spectroscopy measurements reveal quantum dot (QD) behavior with rich Coulomb diamond patterns, suggesting that the GNRs form QDs that are connected both in series and in parallel. Moreover, we show that the additional gates enable differential tuning of the QDs in the nanojunction, providing the first step towards multi-gate control of GNR-based multi-dot systems.

cond-mat.mes-hall↗

arXiv2022

Redox-controlled conductance of polyoxometalate molecular junctions

We demonstrate the reversible in situ photoreduction of molecular junctions of phosphomolybdate [PMo12O40]3- monolayer self-assembled on flat gold electrodes, connected by the tip of a conductive atomic force microscope. The conductance of the one electron reduced [PMo12O40]4- molecular junction is increased by ca. 10, this open-shell state is stable in the junction in air at room temperature. The analysis of a large current-voltage dataset by unsupervised machine learning and clustering algorithms reveals that the electron transport in the pristine phosphomolybdate junctions leads to symmetric current-voltage curves, controlled by the lowest unoccupied molecular orbital (LUMO) at 0.6 - 0.7 eV above the Fermi energy with ca. 25% of the junctions having a better electronic coupling to the electrodes than the main part of the dataset. This analysis also shows that a small fraction (ca. 18% of the dataset) of the molecules is already reduced. The UV light in situ photoreduced phosphomolybdate junctions are systematically featuring slightly asymmetric current - voltage behaviors, which is ascribed to electron transport mediated by the single occupied molecular orbital (SOMO) nearly at resonance with the Fermi energy of the electrode and by a closely located single unoccupied molecular orbital (SUMO) at ca. 0.3 eV above the SOMO with a weak electronic coupling to the electrodes (ca. 50% of the dataset) or at ca. 0.4 eV but with a better electrode coupling (ca. 50% of the dataset). These results shed lights to the electronic properties of reversible switchable redox polyoxometalates, a key point for potential applications in nanoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2022

Ultimately-scaled electrodes for contacting individual atomically-precise graphene nanoribbons

Bottom-up synthesized graphene nanoribbons (GNRs) are quantum materials that can be structured with atomic precision, providing unprecedented control over their physical properties. Accessing the intrinsic functionality of GNRs for quantum technology applications requires the manipulation of single charges, spins, or photons at the level of an individual GNR. However, experimentally, contacting individual GNRs remains challenging due to their nanometer-sized width and length as well as their high density on the metallic growth substrate. Here, we demonstrate the contacting and electrical characterization of individual GNRs in a multi-gate device architecture using single-walled carbon nanotubes (SWNTs) as ultimately-scaled electrodes. The GNR-SWNT devices exhibit well-defined quantum transport phenomena, including Coulomb blockade, excited states, and Franck-Condon blockade, all characteristics pointing towards the contacting of an individual GNR. Combined with the multi-gate architecture, this contacting method opens a road for the integration of GNRs in quantum devices to exploit their topologically trivial and non-trivial nature.

cond-mat.mes-hall↗

arXiv2022

Growth optimization and device integration of narrow-bandgap graphene nanoribbons

The electronic, optical and magnetic properties of graphene nanoribbons (GNRs) can be engineered by controlling their edge structure and width with atomic precision through bottom-up fabrication based on molecular precursors. This approach offers a unique platform for all-carbon electronic devices but requires careful optimization of the growth conditions to match structural requirements for successful device integration, with GNR length being the most critical parameter. In this work, we study the growth, characterization, and device integration of 5-atom wide armchair GNRs (5-AGNRs), which are expected to have an optimal band gap as active material in switching devices. 5-AGNRs are obtained via on-surface synthesis under ultra-high vacuum conditions from Br- and I-substituted precursors. We show that the use of I-substituted precursors and the optimization of the initial precursor coverage quintupled the average 5-AGNR length. This significant length increase allowed us to integrate 5-AGNRs into devices and to realize the first field-effect transistor based on narrow bandgap AGNRs that shows switching behavior at room temperature. Our study highlights that optimized growth protocols can successfully bridge between the sub-nanometer scale, where atomic precision is needed to control the electronic properties, and the scale of tens of nanometers relevant for successful device integration of GNRs.

cond-mat.mtrl-sci↗