Searcharxiv⌕ Search

arXiv subjects

Michel Destrade

Publications and source records attributed to Michel Destrade.

155 records · Page 9Linked to original sources

Interface waves in pre-stressed incompressible solids

We study incremental wave propagation for what is seemingly the simplest boundary value problem, namely that constitued by the plane interface of a semi-infinite solid. With a view to model loaded elastomers and soft tissues, we focus on incompressible solids, subjected to large homogeneous static deformations. The resulting strain-induced anisotropy complicates matters for the incremental boundary value problem, but we transpose and take advantage of powerful techniques and results from the linear anisotropic elastodynamics theory. In particular we cover several situations where fully explicit secular equations can be derived, including Rayleigh and Stoneley waves in principal directions, and Rayleigh waves polarized in a principal plane or propagating in any direction in a principal plane. We also discuss the merits of polynomial secular equations with respect to more robust, but less transparent, exact secular equations.

cond-mat.mtrl-sci↗

Incremental Magnetoelastic Deformations, with Application to Surface Instability

In this paper the equations governing the deformations of infinitesimal (incremental) disturbances superimposed on finite static deformation fields involving magnetic and elastic interactions are presented. The coupling between the equations of mechanical equilibrium and Maxwell's equations complicates the incremental formulation and particular attention is therefore paid to the derivation of the incremental equations, of the tensors of magnetoelastic moduli and of the incremental boundary conditions at a magnetoelastic/vacuum interface. The problem of surface stability for a solid half-space under plane strain with a magnetic field normal to its surface is used to illustrate the general results. The analysis involved leads to the simultaneous resolution of a bicubic and vanishing of a 7x7 determinant. In order to provide specific demonstration of the effect of the magnetic field, the material model is specialized to that of a "magnetoelastic Mooney-Rivlin solid". Depending on the magnitudes of the magnetic field and the magnetoelastic coupling parameters, this shows that the half-space may become either more stable or less stable than in the absence of a magnetic field.

physics.class-ph↗

The stress field in a pulled cork and some subtle points in the semi-inverse method of nonlinear elasticity

In an attempt to describe cork-pulling, we model a cork as an incompressible rubber-like material and consider that it is subject to a helical shear deformation superimposed onto a shrink fit and a simple torsion. It turns out that this deformation field provides an insight into the possible appearance of secondary deformation fields for special classes of materials. We also find that these latent deformation fields are woken up by normal stress differences. We present some explicit examples based on the neo-Hookean, the generalized neo-Hookean and the Mooney-Rivlin forms of the strain-energy density. Using the simple exact solution found in the neo-Hookean case, we conjecture that it is advantageous to accompany the usual vertical axial force by a twisting moment, in order to extrude a cork from the neck of a bottle efficiently. Then we analyse departures from the neo-Hookean behaviour by exact and asymptotic analyses. In that process, we are able to give an elegant and analytic example of secondary (or latent) deformations in the framework of nonlinear elasticity.

physics.class-ph↗

Creep, recovery, and waves in a nonlinear fiber-reinforced viscoelastic solid

We present a constitutive model capturing some of the experimentally observed features of soft biological tissues: nonlinear viscoelasticity, nonlinear elastic anisotropy, and nonlinear viscous anisotropy. For this model we derive the equation governing rectilinear shear motion in the plane of the fiber reinforcement; it is a nonlinear partial differential equation for the shear strain. Specializing the equation to the quasi-static processes of creep and recovery, we find that usual (exponential-like) time growth and decay exist in general, but that for certain ranges of values for the material parameters and for the angle between the shearing direction and the fiber direction, some anomalous behaviors emerge. These include persistence of a nonzero strain in the recovery experiment, strain growth in recovery, strain decay in creep, disappearance of the solution after a finite time, and similar odd comportments. For the full dynamical equation of motion, we find kink (traveling wave) solutions which cannot reach their assigned asymptotic limit.

cond-mat.soft↗

Instabilities in elastomers and soft tissues

Biological soft tissues exhibit elastic properties which can be dramatically different from rubber-type materials (elastomers). To gain a better understanding of the role of constitutive relationships in determining material responses under loads we compare three different types of instabilities (two in compression, one in extension) in hyperelasticity for various forms of strain energy functions typically used for elastomers and for soft tissues. Surprisingly, we find that the strain-hardening property of soft tissues does not always stabilize the material. In particular we show that the stability analyses for a compressed half-space and for a compressed spherical thick shell can lead to opposite conclusions: a soft tissue material is more stable than an elastomer in the former case and less stable in the latter case.

cond-mat.soft↗

Bleustein-Gulyaev waves in some functionally graded materials

Functionally Graded Materials are inhomogeneous elastic bodies whose properties vary continuously with space. Hence consider a half-space (x_2>0) occupied by a special Functionally Graded Material made of an hexagonal (6 mm) piezoelectric crystal for which the elastic stiffness c44, the piezoelectric constant e15, the dielectric constant epsilon11, and the mass density, all vary proportionally to the same "inhomogeneity function" f(x_2), say. Then consider the problem of a piezoacoustic shear-horizontal surface wave which leaves the interface (x_2=0) free of mechanical tractions and vanishes as x_2 goes to infinity (the Bleustein-Gulyaev wave). It turns out that for some choices of the function f, this problem can be solved exactly for the usual boundary conditions, such as metalized surface or free surface. Several such functions f(x_2) are derived here, such as exp($\pm 2βx_2) (βis a constant) which is often encountered in geophysics, or other functions which are periodic or which vanish as x_2 tends to infinity; one final example presents the advantage of describing a layered half-space which becomes asymptotically homogeneous away from the interface. Special attention is given to the influence of the different inhomogeneity functions upon the characteristics of the Bleustein-Gulyaev wave (speed, dispersion, attenuation factors, depth profiles, electromechanical coupling factor, etc.)

cond-mat.mtrl-sci↗

Acoustic waves at the interface of a pre-stressed incompressible elastic solid and a viscous fluid

We analyse the influence of pre-stress on the propagation of interfacial waves along the boundary of an incompressible hyperelastic half-space that is in contact with a viscous fluid extending to infinity in the adjoining half-space. One aim is to derive rigorously the incremental boundary conditions at the interface; this derivation is delicate because of the interplay between the Lagrangian and the Eulerian descriptions but is crucial for numerous problems concerned with the interaction between a compliant wall and a viscous fluid. A second aim of this work is to model the ultrasonic waves used in the assessment of aortic aneurysms, and here we find that for this purpose the half-space idealization is justified at high frequencies. A third goal is to shed some light on the stability behaviour in compression of the solid half-space, as compared with the situation in the absence of fluid; we find that the usual technique of seeking standing waves solutions is not appropriate when the half-space is in contact with a fluid; in fact, a correct analysis reveals that the presence of a viscous fluid makes a compressed neo-Hookean half-space slightly more stable. For a wave travelling in a direction of principal strain, we obtain results for the case of a general (incompressible isotropic) strain-energy function. For a wave travelling parallel to the interface and in an arbitrary direction in a plane of principal strain, we specialize the analysis to the neo-Hookean strain-energy function.

physics.flu-dyn↗

Seismic Rayleigh waves on an exponentially graded, orthotropic half-space

Efforts at modelling the propagation of seismic waves in half-spaces with continuously varying properties have been mostly focused on shear-horizontal waves. Here a sagittaly polarized (Rayleigh type) wave travels along a symmetry axis (and is attenuated along another) of an orthotropic material with stiffnesses and mass density varying in the same exponential manner with depth. Contrary to what could be expected at first sight, the analysis is very similar to that of the homogeneous half-space, with the main and capital difference that the Rayleigh wave is now dispersive. The results are illustrated numerically for (i) an orthotropic half-space typical of horizontally layered and vertically fractured shales and (ii) for an isotropic half-space made of silica. In both examples, the wave travels at a slower speed and penetrates deeper than in the homogeneous case; in the second example, the inhomogeneity can force the wave amplitude to oscillate as well as decay with depth, in marked contrast with the homogeneous isotropic general case.

physics.geo-ph↗

Weierstrass's criterion and compact solitary waves

Weierstrass's theory is a standard qualitative tool for single degree of freedom equations, used in classical mechanics and in many textbooks. In this Brief Report we show how a simple generalization of this tool makes it possible to identify some differential equations for which compact and even semicompact traveling solitary waves exist. In the framework of continuum mechanics, these differential equations correspond to bulk shear waves for a special class of constitutive laws.

physics.class-ph↗

Piezoelectric Love waves on rotated Y-cut mm2 substrates

Consider a layer made of a m3m insulator crystal, with faces cut parallel to a symmetry plane. Then bond it onto a semi-infinite mm2 piezoelectric substrate. For a X- or Y -cut of the substrate, a Love wave can propagate in the resulting structure and the corresponding dispersion equation is derived analytically. It turns out that a fully explicit treatment can also be conducted in the case of a Y -cut rotated about Z. In the case of a germanium layer over a potassium niobate substrate, the wave exists at any wavelength for X- and Y -cuts but this ceases to be the case for rotated cuts, with the appearance of forbidden ranges. By playing on the cut angle, the Love wave can be made to travel faster than, or slower than, or at the same speed as, the shear bulk wave of the layer. A by-product of the analysis is the derivation of the explicit secular equation for the Bleustein-Gulyaev wave in the substrate alone, which corresponds to an asymptotic behavior of the Love wave.

cond-mat.mtrl-sci↗

Solitary and compact-like shear waves in the bulk of solids

We show that a model proposed by Rubin, Rosenau, and Gottlieb [J. Appl. Phys. 77 (1995) 4054], for dispersion caused by an inherent material characteristic length, belongs to the class of simple materials. Therefore, it is possible to generalize the idea of Rubin, Rosenau, and Gottlieb to include a wide range of material models, from nonlinear elasticity to turbulence. Using this insight, we are able to fine-tune nonlinear and dispersive effects in the theory of nonlinear elasticity in order to generate pulse solitary waves and also bulk travelling waves with compact support.

nlin.PS↗