arXiv subjects

Michel Fich

Publications and source records attributed to Michel Fich.

At least 19 recordsLinked to original sources

arXiv2026

CCAT: The Prime-Cam Instrument for the Fred Young Submillimeter Telescope -- Overview and Status

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST), under construction at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam will deliver over ten times greater mapping speed at submillimeter wavelengths than current facilities for unprecedented broadband and spectroscopic measurements in windows between 1.4 -- 0.3 mm (220 -- 850 GHz). When fully populated, Prime-Cam will field over 100,000 kinetic inductance detectors across seven independently optimized instrument modules. With Prime-Cam, the CCAT Collaboration will address a suite of science goals, from Big Bang cosmology, to galaxy evolution and star formation over cosmic time. Prime-Cam is scheduled for integration in FYST in late 2026, followed by a year of early science observations with the 280 and 350 GHz instrument modules. We discuss the design and in-lab testing of the 1.8-m diameter Prime-Cam receiver and 280 GHz instrument module, and give an update on deployment status and early science plans.

astro-ph.IM↗

arXiv2022

CCAT-prime: RFSoC Based Readout for Frequency Multiplexed Kinetic Inductance Detectors

The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) is expected to be the largest deployment of millimeter and submillimeter sensitive kinetic inductance detectors to date. To read out these arrays efficiently, a microwave frequency multiplexed readout has been designed to run on the Xilinx Radio Frequency System on a Chip (RFSoC). The RFSoC has dramatically improved every category of size, weight, power, cost, and bandwidth over the previous generation readout systems. We describe a baseline firmware design which can read out four independent RF networks each with 500 MHz of bandwidth and 1000 detectors for ~30 W. The overall readout architecture is a combination of hardware, gateware/firmware, software, and network design. The requirements of the readout are driven by the 850 GHz instrument module of the 7-module Prime-Cam instrument. These requirements along with other constraints which have led to critical design choices are highlighted. Preliminary measurements of the system phase noise and dynamic range are presented.

astro-ph.IM↗

arXiv2019

The Formation of Stars -- From Filaments to Cores to Protostars and Protoplanetry Disks

Star formation involves the flow of gas and dust within molecular clouds into protostars and young stellar objects (YSOs) due to gravity. Along the way, these flows are shaped significantly by many other mechanisms, including pressure, turbulent motions, magnetic fields, stellar feedback, jets, and angular momentum. How all these mechanisms interact nonlinearly with each other on various length scales leads to the formation and evolution of substructures within clouds, including filaments, clumps, cores, disks, outflows, the protostars/YSOs themselves, and planets. In this white paper, prepared for the 2020 Long Range Plan panel which will recommend Canada's future directions for astronomy, we describe the observational and theoretical leadership in the star formation field that Canada's vibrant community has demonstrated over the past decade. Drawing from this extensive background, we identify five key questions that must be addressed for further progress to be made in understanding star formation in the next decade. Addressing these questions will improve our understanding of the dynamics of the dense gas and the role of the magnetic field in star formation, the optical properties of the dust used to trace mass and magnetic fields, the sources of variability in star-forming objects on short timescales, and the physical processes that specifically promote the clustering of stars. We further highlight key facilities in which Canada should become involved to continue making progress in this field. Single-dish facilities we recommend include LSST, trans-atmospheric far-infrared telescopes like BLAST-TNG and SPICA, and ground-based telescopes like JCMT, GBT, and CCAT-p. Interferometric facilities we recommend include ALMA, ngVLA, and SKA1.

astro-ph.SR↗

arXiv2019

The CCAT-Prime Submillimeter Observatory

The Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) is a new 6-m, off-axis, low-emissivity, large field-of-view submillimeter telescope scheduled for first light in the last quarter of 2021. In summary, (a) CCAT-prime uniquely combines a large field-of-view (up to 8-deg), low emissivity telescope (< 2%) and excellent atmospheric transmission (5600-m site) to achieve unprecedented survey capability in the submillimeter. (b) Over five years, CCAT-prime first generation science will address the physics of star formation, galaxy evolution, and galaxy cluster formation; probe the re-ionization of the Universe; improve constraints on new particle species; and provide for improved removal of dust foregrounds to aid the search for primordial gravitational waves. (c) The Observatory is being built with non-federal funds (~ \$40M in private and international investments). Public funding is needed for instrumentation (~ \$8M) and operations (\$1-2M/yr). In return, the community will be able to participate in survey planning and gain access to curated data sets. (d) For second generation science, CCAT-prime will be uniquely positioned to contribute high-frequency capabilities to the next generation of CMB surveys in partnership with the CMB-S4 and/or the Simons Observatory projects or revolutionize wide-field, sub-millimetter line intensity mapping surveys.

astro-ph.IM↗

arXiv2019

The Distribution of Dense Cores near HII Regions

An investigation of dust emission associated with a large sample of HII regions has been carried out. Stacked results from this sample suggest that each HII region is at or near the center of a cluster of dense cores, that extends far beyond the HII region, and has volume density that decreases as r^(-3). The data also shows evidence for enhanced numbers of cores near the boundary of the HII regions. At the same time, a significant decrease in the number of cores, consistent with no cores, is observed in the interior of these HII regions. Neither these HII regions, nor their associated massive OB stars were found to have a significant heating effect on their associated dusty clumps. Clouds, or the outermost layers of the clumps in which the cores are embedded, are found to exert a strong shielding effect to external heating sources. Despite this, a large portion of the identified cores was found to be warmer than their surrounding cloud and consequently may be in the initial stages of star formation. The star formation efficiency of the 7 HII region systems with the most reliable mass budgets ranged between 1% and 9%.

astro-ph.GA↗

arXiv2019

Astro2020: The Cycling of Matter from the Interstellar Medium to Stars and back

Understanding the matter cycle in the interstellar medium of galaxies from the assembly of clouds to star formation and stellar feedback remains an important and exciting field in comtemporary astrophysics. Many open questions regarding cloud and structure formation, the role of turbulence, and the relative importance of the various feedback processes can only be addressed with observations of spectrally resolved lines. We here stress the importance of two specific sets of lines: the finestructure lines of atomic carbon as a tracer of the dark molecular gas and mid-J CO lines as tracers of the warm, active molecular gas in regions of turbulence dissipation and feedback. The observations must cover a wide range of environments (i.e., physical conditions), which will be achieved by large scale surveys of Galactic molecular clouds, the Galactic Center, the Magellanic clouds, and nearby galaxies. To date, such surveys are completely missing and thus constitute an important science opportunity for the next decade and beyond. For the successful interpretation of the observations, it will be essential to combine them with results from (chemical) modelling and simulations of the interstellar medium.

astro-ph.GA↗

arXiv2018

CCAT-prime: a novel telescope for submillimeter astronomy

The CCAT-prime telescope is a 6-meter aperture, crossed-Dragone telescope, designed for millimeter and sub-millimeter wavelength observations. It will be located at an altitude of 5600 meters, just below the summit of Cerro Chajnantor in the high Atacama region of Chile. The telescope's unobscured optics deliver a field of view of almost 8 degrees over a large, flat focal plane, enabling it to accommodate current and future instrumentation fielding >100k diffraction-limited beams for wavelengths less than a millimeter. The mount is a novel design with the aluminum-tiled mirrors nested inside the telescope structure. The elevation housing has an integrated shutter that can enclose the mirrors, protecting them from inclement weather. The telescope is designed to co-host multiple instruments over its nominal 15 year lifetime. It will be operated remotely, requiring minimum maintenance and on-site activities due to the harsh working conditions on the mountain. The design utilizes nickel-iron alloy (Invar) and carbon-fiber-reinforced polymer (CFRP) materials in the mirror support structure, achieving a relatively temperature-insensitive mount. We discuss requirements, specifications, critical design elements, and the expected performance of the CCAT-prime telescope. The telescope is being built by CCAT Observatory, Inc., a corporation formed by an international partnership of universities. More information about CCAT and the CCAT-prime telescope can be found at www.ccatobservatory.org.

astro-ph.IM↗

arXiv2018

Prime-Cam: A first-light instrument for the CCAT-prime telescope

CCAT-prime will be a 6-meter aperture telescope operating from sub-mm to mm wavelengths, located at 5600 meters elevation on Cerro Chajnantor in the Atacama Desert in Chile. Its novel crossed-Dragone optical design will deliver a high throughput, wide field of view capable of illuminating much larger arrays of sub-mm and mm detectors than can existing telescopes. We present an overview of the motivation and design of Prime-Cam, a first-light instrument for CCAT-prime. Prime-Cam will house seven instrument modules in a 1.8 meter diameter cryostat, cooled by a dilution refrigerator. The optical elements will consist of silicon lenses, and the instrument modules can be individually optimized for particular science goals. The current design enables both broadband, dual-polarization measurements and narrow-band, Fabry-Perot spectroscopic imaging using multichroic transition-edge sensor (TES) bolometers operating between 190 and 450 GHz. It also includes broadband kinetic induction detectors (KIDs) operating at 860 GHz. This wide range of frequencies will allow excellent characterization and removal of galactic foregrounds, which will enable precision measurements of the sub-mm and mm sky. Prime-Cam will be used to constrain cosmology via the Sunyaev-Zeldovich effects, map the intensity of [CII] 158 $μ$m emission from the Epoch of Reionization, measure Cosmic Microwave Background polarization and foregrounds, and characterize the star formation history over a wide range of redshifts. More information about CCAT-prime can be found at www.ccatobservatory.org.

astro-ph.IM↗

arXiv2018

A holistic perspective on the dynamics of G035.39-00.33: the interplay between gas and magnetic fields

Magnetic field is one of the key agents that play a crucial role in shaping molecular clouds and regulating star formation, yet the complete information on the magnetic field is not well constrained due to the limitations in observations. We study the magnetic field in the massive infrared dark cloud G035.39-00.33 from dust continuum polarization observations at 850 $\micron$ with SCUBA-2/POL-2 at JCMT. The magnetic field tends to be perpendicular to the densest part of the main filament (F$_{M}$), whereas it has a less defined relative orientation in the rest of the structure, where it tends to be parallel to some diffuse regions. A mean plane-of-the-sky magnetic field strength of $\sim$50 $μ$G for F$_{M}$ is obtained using Davis-Chandrasekhar-Fermi method. Based on $^{13}$CO (1-0) line observations, we suggest a formation scenario of F$_{M}$ due to large-scale ($\sim$10 pc) cloud-cloud collision. Using additional NH$_3$ line data, we estimate that F$_{M}$ will be gravitationally unstable if it is only supported by thermal pressure and turbulence. The northern part of F$_{M}$, however, can be stabilized by a modest additional support from the local magnetic field. The middle and southern parts of F$_{M}$ are likely unstable even if the magnetic field support is taken into account. We claim that the clumps in F$_{M}$ may be supported by turbulence and magnetic fields against gravitational collapse. Finally, we identified for the first time a massive ($\sim$200 M$_{\sun}$), collapsing starless clump candidate, "c8", in G035.39-00.33. The magnetic field surrounding "c8" is likely pinched, hinting at an accretion flow along the filament.

astro-ph.GA↗

arXiv2017

Herschel and SCUBA-2 observations of dust emission in a sample of Planck cold clumps

Analysis of all-sky Planck submillimetre observations and the IRAS 100um data has led to the detection of a population of Galactic cold clumps. The clumps can be used to study star formation and dust properties in a wide range of Galactic environments. Our aim is to measure dust spectral energy distribution (SED) variations as a function of the spatial scale and the wavelength. We examine the SEDs at large scales using IRAS, Planck, and Herschel data. At smaller scales, we compare with JCMT/SCUBA-2 850um maps with Herschel data that are filtered using the SCUBA-2 pipeline. Clumps are extracted using the Fellwalker method and their spectra are modelled as modified blackbody functions. According to IRAS and Planck data, most fields have dust colour temperatures T_C ~ 14-18K and opacity spectral index values of beta=1.5-1.9. The clumps/cores identified in SCUBA-2 maps have T~ 13K and similar beta values. There are some indications of the dust emission spectrum becoming flatter at wavelengths longer than 500um. In fits involving Planck data, the significance is limited by the uncertainty of the corrections for CO line contamination. The fits to the SPIRE data give a median beta value slightly above 1.8. In the joint SPIRE and SCUBA-2 850um fits the value decreases to beta ~1.6. Most of the observed T-beta anticorrelation can be explained by noise. The typical submillimetre opacity spectral index beta of cold clumps is found to be ~1.7. This is above the values of diffuse clouds but lower than in some previous studies of dense clumps. There is only tentative evidence of T-beta anticorrelation and beta decreasing at millimetre wavelengths.

astro-ph.GA↗

arXiv2016

The JCMT Gould Belt Survey: First results from SCUBA-2 observations of the Cepheus Flare Region

We present observations of the Cepheus Flare obtained as part of the James Clerk Maxwell Telescope (JCMT) Gould Belt Legacy Survey (GBLS) with the SCUBA-2 instrument. We produce a catalogue of sources found by SCUBA-2, and separate these into starless cores and protostars. We determine masses and densities for each of our sources, using source temperatures determined by the Herschel Gould Belt Survey. We compare the properties of starless cores in four different molecular clouds: L1147/58, L1172/74, L1251 and L1228. We find that the core mass functions for each region typically show shallower-than-Salpeter behaviour. We find that L1147/58 and L1228 have a high ratio of starless cores to Class II protostars, while L1251 and L1174 have a low ratio, consistent with the latter regions being more active sites of current star formation, while the former are forming stars less actively. We determine that, if modelled as thermally-supported Bonnor-Ebert spheres, most of our cores have stable configurations accessible to them. We estimate the external pressures on our cores using archival $^{13}$CO velocity dispersion measurements and find that our cores are typically pressure-confined, rather than gravitationally bound. We perform a virial analysis on our cores, and find that they typically cannot be supported against collapse by internal thermal energy alone, due primarily to the measured external pressures. This suggests that the dominant mode of internal support in starless cores in the Cepheus Flare is either non-thermal motions or internal magnetic fields.

astro-ph.GA↗

arXiv2016

The JCMT and Herschel Gould Belt Surveys: A comparison of SCUBA-2 and Herschel data of dense cores in the Taurus dark cloud L1495

We present a comparison of SCUBA-2 850-$μ$m and Herschel 70--500-$μ$m observations of the L1495 filament in the Taurus Molecular Cloud with the goal of characterising the SCUBA-2 Gould Belt Survey (GBS) data set. We identify and characterise starless cores in three data sets: SCUBA-2 850-$μ$m, Herschel 250-$μ$m, and Herschel 250-$μ$m spatially filtered to mimic the SCUBA-2 data. SCUBA-2 detects only the highest-surface-brightness sources, principally detecting protostellar sources and starless cores embedded in filaments, while Herschel is sensitive to most of the cloud structure, including extended low-surface-brightness emission. Herschel detects considerably more sources than SCUBA-2 even after spatial filtering. We investigate which properties of a starless core detected by Herschel determine its detectability by SCUBA-2, and find that they are the core's temperature and column density (for given dust properties). For similar-temperature cores, such as those seen in L1495, the surface brightnesses of the cores are determined by their column densities, with the highest-column-density cores being detected by SCUBA-2. For roughly spherical geometries, column density corresponds to volume density, and so SCUBA-2 selects the densest cores from a population at a given temperature. This selection effect, which we quantify as a function of distance, makes SCUBA-2 ideal for identifying those cores in Herschel catalogues that are closest to forming stars. Our results can now be used by anyone wishing to use the SCUBA-2 GBS data set.

astro-ph.GA↗

arXiv2013

Cold Dust in Hot Regions

We mapped five massive star forming regions with the SCUBA-2 camera on the James Clerk Maxwell Telescope (JCMT). Temperature and column density maps are obtained from the SCUBA-2 450 and 850 $μ$m images. Most of the dense clumps we find have central temperatures below 20 K with some as cold as 8 K, suggesting that they have no internal heating due to the presence of embedded protostars. This is surprising, because at the high densities inferred from these images and at these low temperatures such clumps should be unstable, collapsing to form stars and generating internal heating. The column densities at the clump centres exceed 10$^{23}$ cm$^{-2}$, and the derived peak visual extinction values are from 25-500 mag for $β$ = 1.5-2.5, indicating highly opaque centres. The observed cloud gas masses range from $\sim$ 10 to 10$^{3}$ M$_{\odot}$. The outer regions of the clumps follow an $r^{-2.36\pm0.35}$ density distribution and this power-law structure is observed outside of typically 10$^{4}$ AU. All these findings suggest that these clumps are high-mass starless clumps and most likely contain high-mass starless cores.

astro-ph.GA↗

arXiv2011

Study of Molecular Clouds associated with HII Regions

The properties of molecular clouds associated with 10 HII regions were studied using CO observations. We identified 142 dense clumps within our sample and found that our sources are divided into two categories: those with clumps that show a power law size-line width relation (Type I) and those which do not show any relation (Type II). The clumps in the Type I sources have larger power law indices than found in previous studies. The clumps in the Type II sources have larger line widths and show evidence (such as outflows) of current active star formation within the clump. We suggest that the lack of a size-line width relation is a sign of current active star formation. Massive clumps seem to have similar masses calculated by different methods but lower mass clumps have larger virial masses compared to velocity integrated and LTE mass. We found no relation between mass distribution of the clumps and distance from the H~II region ionization front, but a weak decrease of the excitation temperature with increasing distance from the ionized gas. The clumps in collected shells around the H~II regions have slightly larger line widths but no relation was found between line width and distance from the H~II region, which probably indicates that the internal dynamics of the clumps are not affected by the ionized gas. Internal sources of turbulence, such as outflows and stellar winds from young proto-stars may have a more important role on the molecular gas dynamics. We suggest that large line width and larger size-line width power law indices are therefore the initial characteristics of clumps in massive star forming clouds and that some may evolve into objects similar to our Type II sources, where local "second generation" stars are forming and eliminating the size-line-width relation.

astro-ph.SR↗

arXiv2010

The Submillimetre Universe

Submillimetre continuum radiation allows us to probe cold objects, particularly the earliest, dusty phases of star formation, high-redshift galaxies and circumstellar disks. The submillimetre window gives a unique view of the physical and dynamical conditions in the neutral and molecular interstellar medium. In the next decade a combination of wide-field surveys with single-dish telescopes and targeted follow-up with ALMA and other facilities should enable rapid progress in answering questions about the origins of planetary systems, stars and galaxies.

astro-ph.IM↗

arXiv2009

Studies of Molecular Clouds associated with H II Regions: S175

We are studying the impact of HII regions on star formation in their associated molecular clouds. In this paper we present JCMT RxA molecular line observations of S175 and environs. This is the first within a sample of ten HII regions and their surrounding molecular clouds selected for our study. We first make 7'x 7' maps in $^{12}$CO(2-1), which are used to investigate the structure of the cloud and to identify individual clumps. Single point observations were made in $^{13}$CO(2-1) and CS(5-4) at the peak of the $^{12}$CO(2-1) emission within each clump in order to measure the physical properties of the gas. Densities, temperatures, clump masses, peak velocities, and line widths were measured and calculated using these observations. We have identified two condensations (S175A and S175B) in the molecular cloud associated with this HII region. S175A is adjacent to the ionization front and is expected to be affected by the HII region while S175B is too distant to be disturbed. We compare the structure and gas properties of these two regions to investigate how the molecular gas has been affected by the HII region. S175A has been heated by the HII region and partially compressed by the ionized gas front, but contrary to our expectation it is a quiescent region while S175B is very turbulent and dynamically active. Our investigation for the source of turbulence in S175B resulted in the detection of an outflow within this region.

astro-ph.SR↗

arXiv2009

Far-infrared Observations of the Very Low-Luminosity Embedded Source L1521F-IRS in the Taurus Star-Forming Region

We investigate the environment of the very low-luminosity object L1521F IRS using data from the Taurus Spitzer Legacy Survey. The MIPS 160 micron image shows both extended emission from the Taurus cloud as well as emission from multiple cold cores over a 1 X 2 deg region. Analysis shows that the cloud dust temperature is 14.2 +- 0.4 K and the extinction ratio is A_160/A_K = 0.010 +- 0.001 up to A_V ~ 4 mag. We find kappa_160 = 0.23 +- 0.046 cm^2/g for the specific opacity of the gas-dust mixture. Therefore, for dust in the Taurus cloud we find the 160 um opacity is significantly higher than that measured for the diffuse ISM, but not too different from dense cores, even at modest extinction values. Furthermore, the 160 um image shows features that do not appear in the IRAS 100 um image. We identify six regions as cold cores, i.e. colder than 14.2 K, all of which have counterparts in extinction maps or C18O maps. We compare the effects of L1521F IRS on its natal core and find there is no evidence for dust heating at 160 or 100 um by the embedded source. From the infrared luminosity L_TIR = 0.024 Lo we find L_bol = 0.034 - 0.046L_o, thus confirming the source's low-luminosity. Comparison of L1521F IRS with theoretical simulations for the very early phases of star formation appears to rule out the first core collapse phase. The evolutionary state appears similar to or younger than the class 0 phase, and the estimated mass is likely to be substellar.

astro-ph.SR↗

arXiv2007

ExoPTF Science Uniquely Enabled by Far-IR Interferometry: Probing the Formation of Planetary Systems, and Finding and Characterizing Exoplanets

By providing sensitive sub-arcsecond images and integral field spectroscopy in the 25 - 400 micron wavelength range, a far-IR interferometer will revolutionize our understanding of planetary system formation, reveal otherwise-undetectable planets through the disk perturbations they induce, and spectroscopically probe the atmospheres of extrasolar giant planets in orbits typical of most of the planets in our solar system. The technical challenges associated with interferometry in the far-IR are greatly relaxed relative to those encountered at shorter wavelengths or when starlight nulling is required. A structurally connected far-IR interferometer with a maximum baseline length of 36 m can resolve the interesting spatial structures in nascent and developed exoplanetary systems and measure exozodiacal emission at a sensitivity level critical to TPF-I mission planning. The Space Infrared Interferometric Telescope was recommended in the Community Plan for Far-IR/Submillimeter Space Astronomy, studied as a Probe-class mission, and estimated to cost 800M dollars. The scientific communities in Europe, Japan, and Canada have also demonstrated a keen interest in far-IR interferometry through mission planning workshops and technology research, suggesting the possibility of an international collaborative effort.

astro-ph↗