arXiv subjects

Michele Ceriotti

Publications and source records attributed to Michele Ceriotti.

At least 163 records · Page 9Linked to original sources

arXiv2014

Efficient first-principles calculation of the quantum kinetic energy and momentum distribution of nuclei

Light nuclei at room temperature and below exhibit a kinetic energy which significantly deviates from the predictions of classical statistical mechanics. This quantum kinetic energy is responsible for a wide variety of isotope effects of interest in fields ranging from chemistry to climatology. It also furnishes the second moment of the nuclear momentum distribution, which contains subtle information about the chemical environment and has recently become accessible to deep inelastic neutron scattering experiments. Here we show how, by combining imaginary time path integral dynamics with a carefully designed generalized Langevin equation, it is possible to dramatically reduce the expense of computing the quantum kinetic energy. We also introduce a transient anisotropic Gaussian approximation to the nuclear momentum distribution which can be calculated with negligible additional effort. As an example, we evaluate the structural properties, the quantum kinetic energy, and the nuclear momentum distribution for a first-principles simulation of liquid water.

cond-mat.mtrl-sci↗

arXiv2014

Quantum fluctuations and isotope effects in ab initio descriptions of water

Nuclear quantum effects, such as zero-point energy and tunneling, cause significant changes to the structure and dynamics of hydrogen bonded systems such as liquid water. However, due to the current inability to simulate liquid water using an exact description of its electronic structure, the interplay between nuclear and electronic quantum effects remains unclear. Here we use simulations that incorporate the quantum mechanical nature of both the nuclei and electrons to provide a fully ab initio determination of the particle quantum kinetic energies, free energy change upon exchanging hydrogen for deuterium and the isotope fractionation ratio in water. These properties, which selectively probe the quantum nature of the nuclear degrees of freedom, allow us to make direct comparison to recent experiments and elucidate how electronic exchange and correlation and nuclear quantum fluctuations determine the structure of the hydrogen bond in water.

physics.chem-ph↗

arXiv2014

How to remove the spurious resonances from ring polymer molecular dynamics

Two of the most successful methods that are presently available for simulating the quantum dynamics of condensed phase systems are centroid molecular dynamics (CMD) and ring polymer molecular dynamics (RPMD). Despite their conceptual differences, practical implementations of these methods differ in just two respects: the choice of the Parrinello-Rahman mass matrix and whether or not a thermostat is applied to the internal modes of the ring polymer during the dynamics. Here we explore a method which is halfway between the two approximations: we keep the path integral bead masses equal to the physical particle masses but attach a Langevin thermostat to the internal modes of the ring polymer during the dynamics. We justify this by showing analytically that the inclusion of an internal mode thermostat does not affect any of the desirable features of RPMD: thermostatted RPMD (TRPMD) is equally valid with respect to everything that has actually been proven about the method as RPMD itself. In particular, because of the choice of bead masses, the resulting method is still optimum in the short-time limit, and the transition state approximation to its reaction rate theory remains closely related to the semiclassical instanton approximation in the deep quantum tunneling regime. In effect, there is a continuous family of methods with these properties, parameterised by the strength of the Langevin friction. Here we explore numerically how the approximation to quantum dynamics depends on this friction, with a particular emphasis on vibrational spectroscopy. We find that a broad range of frictions approaching optimal damping give similar results, and that these results are immune to both the resonance problem of RPMD and the curvature problem of CMD.

physics.chem-ph↗

arXiv2014

Evaluating functions of positive-definite matrices using colored noise thermostats

Many applications in computational science require computing the elements of a function of a large matrix. A commonly used approach is based on the the evaluation of the eigenvalue decomposition, a task that, in general, involves a computing time that scales with the cube of the size of the matrix. We present here a method that can be used to evaluate the elements of a function of a positive-definite matrix with a scaling that is linear for sparse matrices and quadratic in the general case. This methodology is based on the properties of the dynamics of a multidimensional harmonic potential coupled with colored noise generalized Langevin equation (GLE) thermostats. This "$f-$thermostat" (FTH) approach allows us to calculate directly elements of functions of a positive-definite matrix by carefully tailoring the properties of the stochastic dynamics. We demonstrate the scaling and the accuracy of this approach for both dense and sparse problems and compare the results with other established methodologies.

physics.comp-ph↗

arXiv2014

i-PI: A Python interface for ab initio path integral molecular dynamics simulations

Recent developments in path integral methodology have significantly reduced the computational expense of including quantum mechanical effects in the nuclear motion in ab initio molecular dynamics simulations. However, the implementation of these developments requires a considerable programming effort, which has hindered their adoption. Here we describe i-PI, an interface written in Python that has been designed to minimise the effort required to bring state-of-the-art path integral techniques to an electronic structure program. While it is best suited to first principles calculations and path integral molecular dynamics, i-PI can also be used to perform classical molecular dynamics simulations, and can just as easily be interfaced with an empirical forcefield code. To give just one example of the many potential applications of the interface, we use it in conjunction with the CP2K electronic structure package to showcase the importance of nuclear quantum effects in high pressure water.

physics.comp-ph↗

arXiv2013

Direct Measurement of Competing Quantum Effects on the Kinetic Energy of Heavy Water upon Melting

Even at room temperature, quantum mechanics plays a major role in determining the quantitative behaviour of light nuclei, changing significantly the values of physical properties such as the heat capacity. However, other observables appear to be only weakly affected by nuclear quantum effects (NQEs): for instance, the melting temperatures of light and heavy water differ by less than 4 K. Recent theoretical work has attributed this to a competition between intra and inter molecular NQEs, which can be separated by computing the anisotropy of the quantum kinetic energy tensor. The principal values of this tensor change in opposite directions when ice melts, leading to a very small net quantum mechanical effect on the melting point. This paper presents the first direct experimental observation of this phenomenon, achieved by measuring the deuterium momentum distributions n(p) in heavy water and ice using Deep Inelastic Neutron Scattering (DINS), and resolving their anisotropy. Results from the experiments, supplemented by a theoretical analysis, show that the anisotropy of the quantum kinetic energy tensor can also be captured for heavier atoms such as oxygen.

cond-mat.mtrl-sci↗

arXiv2012

Efficient methods and practical guidelines for simulating isotope effects

The shift in chemical equilibria due to isotope substitution is often exploited to gain insight into a wide variety of chemical and physical processes. It is a purely quantum mechanical effect, which can be computed exactly using simulations based on the path integral formalism. Here we discuss how these techniques can be made dramatically more efficient, and how they ultimately outperform quasi-harmonic approximations to treat quantum liquids not only in terms of accuracy, but also in terms of computational efficiency. To achieve this goal we introduce path integral quantum mechanics estimators based on free energy perturbation, which enable the evaluation of isotope effects using only a single path integral molecular dynamics trajectory of the naturally abundant isotope. We use as an example the calculation of the free energy change associated with H/D and 16O/18O substitutions in liquid water, and of the fractionation of those isotopes between the liquid and the vapor phase. In doing so, we demonstrate and discuss quantitatively the relative benefits of each approach, thereby providing a set of guidelines that should facilitate the choice of the most appropriate method in different, commonly encountered scenarios. The efficiency of the estimators we introduce and the analysis that we perform should in particular facilitate accurate ab initio calculation of isotope effects in condensed phase systems.

cond-mat.stat-mech↗

arXiv2012

Colored-noise thermostats à la carte

Recently, we have shown how a colored-noise Langevin equation can be used in the context of molecular dynamics as a tool to obtain dynamical trajectories whose properties are tailored to display desired sampling features. In the present paper, after having reviewed some analytical results for the stochastic differential equations forming the basis of our approach, we describe in detail the implementation of the generalized Langevin equation thermostat and the fitting procedure used to obtain optimal parameters. We discuss in detail the simulation of nuclear quantum effects, and demonstrate that, by carefully choosing parameters, one can successfully model strongly anharmonic solids such as neon. For the reader's convenience, a library of thermostat parameters and some demonstrative code can be downloaded from an on-line repository.

physics.comp-ph↗

arXiv2012

Accelerating the convergence of path integral dynamics with a generalized Langevin equation

The quantum nature of nuclei plays an important role in the accurate modelling of light atoms such as hydrogen, but it is often neglected in simulations due to the high computational overhead involved. It has recently been shown that zero-point energy effects can be included comparatively cheaply in simulations of harmonic and quasi-harmonic systems by augmenting classical molecular dynamics with a generalized Langevin equation (GLE). Here we describe how a similar approach can be used to accelerate the convergence of path integral (PI) molecular dynamics to the exact quantum mechanical result in more strongly anharmonic systems exhibiting both zero point energy and tunnelling effects. The resulting PI-GLE method is illustrated with applications to a double-well tunnelling problem and to liquid water.

physics.comp-ph↗

arXiv2011

The inefficiency of re-weighted sampling and the curse of system size in high order path integration

Computing averages over a target probability density by statistical re-weighting of a set of samples with a different distribution is a strategy which is commonly adopted in fields as diverse as atomistic simulation and finance. Here we present a very general analysis of the accuracy and efficiency of this approach, highlighting some of its weaknesses. We then give an example of how our results can be used, specifically to assess the feasibility of high-order path integral methods. We demonstrate that the most promising of these techniques -- which is based on re-weighted sampling -- is bound to fail as the size of the system is increased, because of the exponential growth of the statistical uncertainty in the re-weighted average.

physics.chem-ph↗

arXiv2010

Efficient multiple time scale molecular dynamics: using colored noise thermostats to stabilize resonances

Multiple time scale molecular dynamics enhances computational efficiency by updating slow motions less frequently than fast motions. However, in practice the largest outer time step possible is limited not by the physical forces but by resonances between the fast and slow modes. In this paper we show that this problem can be alleviated by using a simple colored noise thermostatting scheme which selectively targets the high frequency modes in the system. For two sample problems, flexible water and solvated alanine dipeptide, we demonstrate that this allows the use of large outer time steps while still obtaining accurate sampling and minimizing the perturbation of the dynamics. Furthermore, this approach is shown to be comparable to constraining fast motions, thus providing an alternative to molecular dynamics with constraints.

cond-mat.stat-mech↗

arXiv2010

Nuclear quantum effects in ab initio dynamics: theory and experiments for lithium imide

Owing to their small mass, hydrogen atoms exhibit strong quantum behavior even at room temperature. Including these effects in first principles calculations is challenging, because of the huge computational effort required by conventional techniques. Here we present the first ab-initio application of a recently-developed stochastic scheme, which allows to approximate nuclear quantum effects inexpensively. The proton momentum distribution of lithium imide, a material of interest for hydrogen storage, was experimentally measured by inelastic neutron scattering experiments and compared with the outcome of quantum thermostatted ab initio dynamics. We obtain favorable agreement between theory and experiments for this purely quantum mechanical property, thereby demonstrating that it is possible to improve the modelling of complex hydrogen-containing materials without additional computational effort.

cond-mat.mtrl-sci↗

arXiv2010

Static disorder and structural correlations in the low temperature phase of lithium imide

Based on ab-initio molecular dynamics simulations, we investigate the low temperature crystal structure of Li2NH which in spite of its great interest as H-storage material is still matter of debate. The dynamical simulations reveal a precise correlation in the fractional occupation of Li sites which leads average atomic positions in excellent agreement with diffraction data and solves inconsistencies of previous proposals.

cond-mat.mtrl-sci↗

arXiv2010

A self-learning algorithm for biased molecular dynamics

A new self-learning algorithm for accelerated dynamics, reconnaissance metadynamics, is proposed that is able to work with a very large number of collective coordinates. Acceleration of the dynamics is achieved by constructing a bias potential in terms of a patchwork of one-dimensional, locally valid collective coordinates. These collective coordinates are obtained from trajectory analyses so that they adapt to any new features encountered during the simulation. We show how this methodology can be used to enhance sampling in real chemical systems citing examples both from the physics of clusters and from the biological sciences.

physics.comp-ph↗

arXiv2010

Efficient stochastic thermostatting of path integral molecular dynamics

The path integral molecular dynamics (PIMD) method provides a convenient way to compute the quantum mechanical structural and thermodynamic properties of condensed phase systems at the expense of introducing an additional set of high-frequency normal modes on top of the physical vibrations of the system. Efficiently sampling such a wide range of frequencies provides a considerable thermostatting challenge. Here we introduce a simple stochastic path integral Langevin equation (PILE) thermostat which exploits an analytic knowledge of the free path integral normal mode frequencies. We also apply a recently-developed colored-noise thermostat based on a generalized Langevin equation (GLE), which automatically achieves a similar, frequency-optimized sampling. The sampling efficiencies of these thermostats are compared with that of the more conventional Nosé-Hoover chain (NHC) thermostat for a number of physically relevant properties of the liquid water and hydrogen-in-palladium systems. In nearly every case, the new PILE thermostat is found to perform just as well as the NHC thermostat while allowing for a computationally more efficient implementation. The GLE thermostat also proves to be very robust delivering a near-optimum sampling efficiency in all of the cases considered. We suspect that these simple stochastic thermostats will therefore find useful application in many future PIMD simulations.

cond-mat.stat-mech↗

arXiv2010

Solid-liquid interface free energy through metadynamics simulations

The solid-liquid interface free energy γsl is a key parameter controlling nucleation and growth during solidification and other phenomena. There are intrinsic difficulties in obtaining accurate experimental values, and the previous approaches to compute γsl with atomistic simulations are computationally demanding. We propose a new approach, which is to obtain γsl from a free energy map of the phase transition reconstructed by metadynamics. We apply this to the benchmark case of a Lennard-Jones potential and the results confirm the most reliable data obtained previously. We demonstrate several advantages of our new approach: it is simple to implement, robust and free of hysteresis problems, it allows a rigorous and unbiased estimate of the statistical uncertainty and it returns a good estimate of of the thermodynamic limit with system sizes of a just a few hundred atoms. It is therefore attractive for using with more realistic and specific models of interatomic forces.

cond-mat.mtrl-sci↗

arXiv2010

Langevin equation with colored noise for constant-temperature molecular dynamics simulations

We discuss the use of a Langevin equation with a colored (correlated) noise to perform constant-temperature molecular dynamics simulations. Since the equations of motion are linear in nature, it is easy to predict the response of a Hamiltonian system to such a thermostat and to tune at will the relaxation time of modes of different frequency. This allows one to optimize the time needed to thermalize the system and generate independent configurations. We show how this frequency-dependent response can be exploited to control the temperature of Car-Parrinello-like dynamics, keeping at low temperature the electronic degrees of freedom, without affecting the adiabatic separation from the vibrations of the ions.

cond-mat.stat-mech↗

arXiv2009

Nuclear quantum effects in solids using a colored-noise thermostat

We present a method, based on a non-Markovian Langevin equation, to include quantum corrections to the classical dynamics of ions in a quasi-harmonic system. By properly fitting the correlation function of the noise, one can vary the fluctuations in positions and momenta as a function of the vibrational frequency, and fit them so as to reproduce the quantum-mechanical behavior, with minimal a priori knowledge of the details of the system. We discuss the application of the thermostat to diamond and to ice Ih. We find that results in agreement with path-integral molecular dynamics can be obtained using only a fraction of the computational effort.

cond-mat.stat-mech↗