arXiv subjects

Michele Girfoglio

Publications and source records attributed to Michele Girfoglio.

At least 37 records · Page 2Linked to original sources

arXiv2024

Linear and nonlinear filtering for a two-layer quasi-geostrophic ocean model

Although the two-layer quasi-geostrophic equations (2QGE) are a simplified model for the dynamics of a stratified, wind-driven ocean, their numerical simulation is still plagued by the need for high resolution to capture the full spectrum of turbulent scales. Since such high resolution would lead to unreasonable computational times, it is typical to resort to coarse low-resolution meshes combined with the so-called eddy viscosity parameterization to account for the diffusion mechanisms that are not captured due to mesh under-resolution. We propose to enable the use of further coarsened meshes by adding a (linear or nonlinear) differential low-pass to the 2QGE, without changing the eddy viscosity coefficient. While the linear filter introduces constant (additional) artificial viscosity everywhere in the domain, the nonlinear filter relies on an indicator function to determine where and how much artificial viscosity is needed. Through several numerical results for a double-gyre wind forcing benchmark, we show that with the nonlinear filter we obtain accurate results with very coarse meshes, thereby drastically reducing the computational time (speed up ranging from 30 to 300).

math.NA↗

arXiv2024

A LSTM-enhanced surrogate model to simulate the dynamics of particle-laden fluid systems

The numerical treatment of fluid-particle systems is a very challenging problem because of the complex coupling phenomena occurring between the two phases. Although accurate mathematical modelling is available to address this kind of application, the computational cost of the numerical simulations is very expensive. The use of the most modern high-performance computing infrastructures could help to mitigate such an issue but not completely fix it. In this work, we develop a non-intrusive data-driven reduced order model (ROM) for Computational Fluid Dynamics (CFD) - Discrete Element Method (DEM) simulations. The ROM is built using the proper orthogonal decomposition (POD) for the computation of the reduced basis space and the Long Short-Term Memory (LSTM) network for the computation of the reduced coefficients. We are interested in dealing both with system identification and prediction. The most relevant novelties rely on (i) a filtering procedure of the full-order snapshots to reduce the dimensionality of the reduced problem and (ii) a preliminary treatment of the particle phase. The accuracy of our ROM approach is assessed against the classic Goldschmidt fluidized bed benchmark problem. Finally, we also provide some insights about the efficiency of our ROM approach.

math.NA↗

arXiv2024

A comparative computational study of different formulations of the compressible Euler equations for mesoscale atmospheric flows in a finite volume framework

We consider three conservative forms of the mildly compressible Euler equations, called CE1, CE2 and CE3, with the goal of understanding which leads to the most accurate and robust pressure-based solver in a finite volume environment. Forms CE1 and CE2 are both written in density, momentum, and specific enthalpy, but employ two different treatments of the buoyancy and pressure gradient terms: for CE1 it is the standard pressure splitting implemented in open-source finite volume solvers (e.g., OpenFOAM), while for CE2 it is the typical pressure splitting found in computational atmospheric studies. Form CE3 is written in density, momentum, and potential temperature, with the buoyancy and pressure terms addressed as in CE2. For each formulation, we adopt a computationally efficient splitting approach. The three formulations are thoroughly assessed and compared through six benchmark tests involving dry air flow over a flat terrain or orography. We found that all three models are able to provide accurate results for the tests with a flat terrain, although the solvers based on the CE2 and CE3 forms are more robust. As for the mountain tests, CE1 solutions become unstable, while the CE2 and CE3 models provide results in very good agreement with data in the literature, the CE3 model being the most accurate. Hence, the CE3 model is the most accurate, reliable, and robust for the simulation of mesoscale atmospheric flows when using a pressure-based approach and space discretization by a finite volume method.

physics.flu-dyn↗

arXiv2023

A Reduced Order Model formulation for left atrium flow: an Atrial Fibrillation case

A data-driven Reduced Order Model (ROM) based on a Proper Orthogonal Decomposition - Radial Basis Function (POD-RBF) approach is adopted in this paper for the analysis of blood flow dynamics in a patient-specific case of Atrial Fibrillation (AF). The Full Order Model (FOM) is represented by incompressible Navier-Stokes equations, discretized with a Finite Volume (FV) approach. Both the Newtonian and the Casson's constitutive laws are employed. The aim is to build a computational tool able to efficiently and accurately reconstruct the patterns of relevant hemodynamics indices related to the stasis of the blood in a physical parametrization framework including the cardiac output in the Newtonian case and also the plasma viscosity and the hematocrit in the non-Newtonian one. Many FOM-ROM comparisons are shown to analyze the performance of our approach as regards errors and computational speed-up.

physics.flu-dyn↗

arXiv2023

A Comparison of Data-Driven Reduced Order Models for the Simulation of Mesoscale Atmospheric Flow

The simulation of atmospheric flows by means of traditional discretization methods remains computationally intensive, hindering the achievement of high forecasting accuracy in short time frames. In this paper, we apply three reduced order models that have successfully reduced the computational time for different applications in computational fluid dynamics while preserving accuracy: Dynamic Mode Decomposition (DMD), Hankel Dynamic Mode Decomposition (HDMD), and Proper Orthogonal Decomposition with Interpolation (PODI). The three methods are compared in terms of computational time and accuracy in the simulation of two well-known benchmarks for mesoscale flow. The accuracy of the DMD and HDMD solutions deteriorates rather quickly as the forecast time window expands, although these methods are designed to predict the dynamics of a system. The reason is likely the strong nonlinearity in the benchmark flows. The PODI solution is accurate for the entire duration of the time interval of interest thanks to the use of interpolation with radial basis functions. This holds true also when the model features a physical parameter expected to vary in a given range, as is typically the case in weather prediction.

physics.flu-dyn↗

arXiv2023

Filter stabilization for the mildly compressible Euler equations with application to atmosphere dynamics simulations

We present a filter stabilization technique for the mildly compressible Euler equations that relies on a linear or nonlinear indicator function to identify the regions of the domain where artificial viscosity is needed and determine its amount. For the realization of this technique, we adopt a three step algorithm called Evolve-Filter-Relax (EFR), which at every time step evolves the solution (i.e., solves the Euler equations on a coarse mesh), then filters the computed solution, and finally performs a relaxation step to combine the filtered and non-filtered solutions. We show that the EFR algorithm is equivalent to an eddy-viscosity model in Large Eddy Simulation. Three indicator functions are considered: a constant function (leading to a linear filter), a function proportional to the norm of the velocity gradient (recovering a Smagorinsky-like model), and a function based on approximate deconvolution operators. Through well-known benchmarks for atmospheric flow, we show that the deconvolution-based filter yields stable solutions that are much less dissipative than the linear filter and the Samgorinsky-like model and we highlight the efficiency of the EFR algorithm.

math.NA↗

arXiv2023

Applicable Methodologies for the Mass Transfer Phenomenon in Tumble Dryers: A Review

Tumble dryers offer a fast and convenient way of drying textiles independent of weather conditions and therefore are frequently used in ordinary households. However, artificial drying of textiles consumes considerable amounts of energy, approximately 8.2 percent of the residential electricity consumption is for drying of textiles in northern European countries (Cranston et al., 2019). Several authors have investigated the aspects of the clothes drying cycle with experimental and numerical methods to understand and improve the process. The first turning point study on understanding the physics of evaporation for tumble dryers was presented by Lambert et al. (1991) in the early 90s. With the aid of Chilton_Colburn analogy, they introduced the concept of area-mass transfer coefficient to address evaporation rate. Afterwards, several experimental or numerical studies were published based on this concept, and furthermore, the model was then developed into 0-dimensional (Deans, 2001) and 1-dimensional (Wei et al., 2017) to gain more accuracy. The evaporation rate is considered to be the main system parameter for dryers with which other performance parameters including drying time, effectiveness, moisture content and efficiency can be estimated. More recent literature focused on utilizing dimensional analysis or image processing techniques to correlate drying indices with system parameters. However, the validity of these regressed models is machine-specific, and hence, cannot be generalized yet. All the previous models for estimating the evaporation rate in tumble dryers are discussed. The review of the related literature showed that all of the previous models for the prediction of the evaporation rate in the clothes dryers have some limitations in terms of accuracy and applicability.

math.NA↗

arXiv2023

GEA: a new finite volume-based open source code for the numerical simulation of atmospheric and ocean flows

We introduce GEA (Geophysical and Environmental Applications), a new open-source atmosphere and ocean modeling framework within the finite volume C++ library OpenFOAM. Here, we present the development of a non-hydrostatic atmospheric model consisting of a pressure-based solver for the Euler equations written in conservative form using density, momentum, and total energy as variables. We validate the solver for two idealized test cases involving buoyancy driven flows: smooth and non-smooth rising thermal bubble. Through qualitative and quantitative comparisons against numerical data available in the literature, we show that our approach is accurate.

physics.flu-dyn↗

arXiv2023

A Non-Intrusive Data-Driven Reduced Order Model for Parametrized CFD-DEM Numerical Simulations

The investigation of fluid-solid systems is very important in a lot of industrial processes. From a computational point of view, the simulation of such systems is very expensive, especially when a huge number of parametric configurations needs to be studied. In this context, we develop a non-intrusive data-driven reduced order model (ROM) built using the proper orthogonal decomposition with interpolation (PODI) method for Computational Fluid Dynamics (CFD) -- Discrete Element Method (DEM) simulations. The main novelties of the proposed approach rely in (i) the combination of ROM and FV methods, (ii) a numerical sensitivity analysis of the ROM accuracy with respect to the number of POD modes and to the cardinality of the training set and (iii) a parametric study with respect to the Stokes number. We test our ROM on the fluidized bed benchmark problem. The accuracy of the ROM is assessed against results obtained with the FOM both for Eulerian (the fluid volume fraction) and Lagrangian (position and velocity of the particles) quantities. We also discuss the efficiency of our ROM approach.

physics.flu-dyn↗

arXiv2023

Validation of an OpenFOAM-based solver for the Euler equations with benchmarks for mesoscale atmospheric modeling

Within OpenFOAM, we develop a pressure-based solver for the Euler equations written in conservative form using density, momentum, and total energy as variables. Under simplifying assumptions, these equations are used to describe non-hydrostatic atmospheric flow. For the stabilization of the Euler equations and to capture sub-grid processes, we consider two Large Eddy Simulation models: the classical Smagorinsky model and the one equation eddy-viscosity model. To achieve high computational efficiency, our solver uses a splitting scheme that decouples the computation of each variable. The numerical results obtained with our solver are validated against numerical data available in the literature for two classical benchmarks: the rising thermal bubble and the density current. Through qualitative and quantitative comparisons, we show that our approach is accurate. This work is meant to lay the foundation for a new open source package specifically created for quick assessment of new computational approaches for the simulation of atmospheric flows at the mesoscale level

physics.flu-dyn↗

arXiv2022

A linear filter regularization for POD-based reduced order models of the quasi-geostrophic equations

We propose a regularization for Reduced Order Models (ROMs) of the quasi-geostrophic equations (QGE) to increase accuracy when the Proper Orthogonal Decomposition (POD) modes retained to construct the reduced basis are insufficient to describe the system dynamics. Our regularization is based on the so-called BV-alpha model, which modifies the nonlinear term in the QGE and adds a linear differential filter for the vorticity. To show the effectiveness of the BV-alpha model for ROM closure, we compare the results computed by a POD-Galerkin ROM with and without regularization for the classical double-gyre wind forcing benchmark. Our numerical results show that the solution computed by the regularized ROM is more accurate, even when the retained POD modes account for a small percentage of the eigenvalue energy. Additionally, we show that, although computationally more expensive that the ROM with no regularization, the regularized ROM is still a competitive alternative to full order simulations of the QGE.

math.NA↗

arXiv2022

Thermomechanical modelling for industrial applications

In this work we briefly present a thermomechanical model that could serve as starting point for industrial applications. We address the non-linearity due to temperature dependence of material properties and heterogeneity due to presence of different materials. Finally a numerical example related to the simplified geometry of blast furnace hearth walls is shown with the aim of assessing the feasibility of the modelling framework. Keywords: nonlinear thermomechanical model, finite element method, heterogeneous material, blast furnace.

math.NA↗

arXiv2022

A data-driven Reduced Order Method for parametric optimal blood flow control: application to coronary bypass graft

We consider an optimal flow control problem in a patient-specific coronary artery bypass graft with the aim of matching the blood flow velocity with given measurements as the Reynolds number varies in a physiological range. Blood flow is modelled with the steady incompressible Navier-Stokes equations. The geometry consists in a stenosed left anterior descending artery where a single bypass is performed with the right internal thoracic artery. The control variable is the unknown value of the normal stress at the outlet boundary, which is need for a correct set-up of the outlet boundary condition. For the numerical solution of the parametric optimal flow control problem, we develop a data-driven reduced order method that combines proper orthogonal decomposition (POD) with neural networks. We present numerical results showing that our data-driven approach leads to a substantial speed-up with respect to a more classical POD-Galerkin strategy proposed in [59], while having comparable accuracy.

physics.med-ph↗

arXiv2022

Finite element based model order reduction for parametrized one-way coupled steady state linear thermomechanical problems

This contribution focuses on the development of Model Order Reduction (MOR) for one-way coupled steady state linear thermomechanical problems in a finite element setting. We apply Proper Orthogonal Decomposition (POD) for the computation of reduced basis space. On the other hand, for the evaluation of the modal coefficients, we use two different methodologies: the one based on the Galerkin projection (G) and the other one based on Artificial Neural Network (ANN). We aim at comparing POD-G and POD-ANN in terms of relevant features including errors and computational efficiency. In this context, both physical and geometrical parametrization are considered. We also carry out a validation of the Full Order Model (FOM) based on customized benchmarks in order to provide a complete computational pipeline. The framework proposed is applied to a relevant industrial problem related to the investigation of thermomechanical phenomena arising in blast furnace hearth walls. Keywords: Thermomechanical problems, Finite element method, Proper orthogonal decomposition, Galerkin projection, Artificial neural network, Geometric and physical parametrization, Blast furnace.

math.NA↗

arXiv2022

Fast and accurate numerical simulations for the study of coronary artery bypass grafts by artificial neural network

In this work a machine learning-based Reduced Order Model (ROM) is developed to investigate in a rapid and reliable way the hemodynamic patterns in a patient-specific configuration of Coronary Artery Bypass Graft (CABG). The computational domain is composed by the left branches of coronary arteries when a stenosis of the Left Main Coronary Artery (LMCA) occurs. A reduced basis space is extracted from a collection of Finite Volume (FV) solutions of the incompressible Navier-Stokes equations by using the Proper Orthogonal Decomposition (POD) algorithm. Artificial Neural Networks (ANNs) are employed to compute the modal coefficients. Stenosis is introduced by morphing the volume meshes with a Free Form Deformation (FFD) by means of a Non-Uniform Rational Basis Spline (NURBS) volumetric parameterization.

math.NA↗

arXiv2022

An introduction to POD-Greedy-Galerkin reduced basis method

Partial differential equations can be used to model many problems in several fields of application including, e.g., fluid mechanics, heat and mass transfer, and electromagnetism. Accurate discretization methods (e.g., finite element or finite volume methods, the so-called full order models) are widely used to numerically solve these problems. However, when many physical and/or geometrical parameters are involved, the computational cost required by full order models becomes prohibitively expensive and this is not acceptable for real-time computations that are becoming more and more popular for rapid prototyping. Therefore, there is the need to introduce reduced order methods (also referred to as reduced basis methods) able to provide, as the input parameters change, fast and reliable solutions at a reduced computational cost.

math.NA↗

arXiv2022

Data-driven reduced order modelling for patient-specific hemodynamics of coronary artery bypass grafts with physical and geometrical parameters

In this work the development of a machine learning-based Reduced Order Model (ROM) for the investigation of hemodynamics in a patient-specific configuration of Coronary Artery Bypass Graft (CABG) is proposed. The computational domain is referred to left branches of coronary arteries when a stenosis of the Left Main Coronary Artery (LMCA) occurs. The method extracts a reduced basis space from a collection of high-fidelity solutions via a Proper Orthogonal Decomposition (POD) algorithm and employs Artificial Neural Networks (ANNs) for the computation of the modal coefficients. The Full Order Model (FOM) is represented by the incompressible Navier-Stokes equations discretized using a Finite Volume (FV) technique. Both physical and geometrical parametrization are taken into account, the former one related to the inlet flow rate and the latter one related to the stenosis severity. With respect to the previous works focused on the development of a ROM framework for the evaluation of coronary artery disease, the novelties of our study include the use of the FV method in a patient-specific configuration, the use of a data-driven ROM technique and the mesh deformation strategy based on a Free Form Deformation (FFD) technique. The performance of our ROM approach is analyzed in terms of the error between full order and reduced order solutions as well as the speedup achieved at the online stage.

physics.med-ph↗

arXiv2022

Consistency of the Full and Reduced Order Models for Evolve-Filter-Relax Regularization of Convection-Dominated, Marginally-Resolved Flows

Numerical stabilization is often used to eliminate (alleviate) the spurious oscillations generally produced by full order models (FOMs) in under-resolved or marginally-resolved simulations of convection-dominated flows. In this paper we investigate the role of numerical stabilization in reduced order models (ROMs) of convection-dominated, marginally-resolved flows. Specifically, we investigate the FOM-ROM consistency, i.e., whether the numerical stabilization is beneficial both at the FOM and the ROM level. As a numerical stabilization strategy, we focus on the evolve-filter-relax (EFR) regularization algorithm, which centers around spatial filtering. To investigate the FOM-ROM consistency, we consider two ROM strategies: (i) the EFR-ROM, in which the EFR stabilization is used at the FOM level, but not at the ROM level; and (ii) the EFR-EFRROM, in which the EFR stabilization is used both at the FOM and at the ROM level. We compare the EFR-ROM with the EFR-EFRROM in the numerical simulation of a 2D flow past a circular cylinder in the convection-dominated, marginally-resolved regime. We also perform model reduction with respect to both time and Reynolds number. Our numerical investigation shows that the EFR-EFRROM is more accurate than the EFR-ROM, which suggests that FOM-ROM consistency is beneficial in convection-dominated, marginally-resolved flows.

physics.flu-dyn↗