arXiv subjects

Michele Marino

Publications and source records attributed to Michele Marino.

9 recordsLinked to original sources

arXiv2025

An Insight into Parameter Identifiability Issues in the Carreau-Yasuda Model: a More Consistent Rheological Formulation for Shear-thinning non-Newtonian Inelastic Fluids

The Carreau-Yasuda rheological model is widely employed in both research and industrial applications to describe the shear-thinning behaviour of non-Newtonian inelastic fluids. However, the model parameter traditionally employed to characterize the shear thinning response exhibits only a weak correlation with the actual shear thinning rate observed in experimental data. This limitation leads to intrinsic identifiability issues, which may result in misleading physical interpretations of the model parameters and unreliable flow predictions. Aiming to contribute to overcoming these issues, this paper introduces a novel heuristic rheological formulation for shear-thinning non-Newtonian inelastic fluids, as an alternative to the Carreau-Yasuda model. Analytical results and exemplary numerical case studies demonstrate that the proposed formulation is based on physically meaningful model parameters, whose identifiability is not compromised by the key limitations of the Carreau-Yasuda model. The new approach allows for effective parameter estimation through a straightforward direct identification strategy, eliminating the need for inverse identification procedures based on nonlinear regression techniques. Moreover, the proposed formulation naturally enables the identication of two Carreau numbers based on the two characteristic shear rates of the fluid.

physics.flu-dyn↗

arXiv2025

A Quasi-Analytical Solution for "Carreau-Yasuda-like" Shear-thinning Fluids Flowing in Slightly Tapered Pipes

This paper presents a quasi-analytical framework for "Carreau-Yasuda-like" fluids with a viscosity characterized by two constant plateau at low and high shear rates connected by a shear-thinning branch, and flowing in slightly tapered pipes. This setup is common in research and industrial applications since the last century, by assuming both a Newtonian or a non-Newtonian inelastic behaviour. Nevertheless, an analytical solution for "Carreau-Yasuda-like" fluids is still lacking. The expressions have been derived by using the order-of-magnitude analysis and neglecting the inertial terms in the momentum balance equations. The analytical solutions are employed to an extrusion bioprinting process as an application example, and verified through numerical procedures.

physics.flu-dyn↗

arXiv2024

A comparative analysis of transient finite-strain coupled diffusion-deformation theories for hydrogels

This work presents a comparative review and classification between some well-known thermodynamically consistent models of hydrogel behavior in a large deformation setting, specifically focusing on solvent absorption/desorption and its impact on mechanical deformation and network swelling. The proposed discussion addresses formulation aspects, general mathematical classification of the governing equations, and numerical implementation issues based on the finite element method. The theories are presented in a unified framework demonstrating that, despite not being evident in some cases, all of them follow equivalent thermodynamic arguments. A detailed numerical analysis is carried out where Taylor-Hood elements are employed in the spatial discretization to satisfy the inf-sup condition and to prevent spurious numerical oscillations. The resulting discrete problems are solved using the FEniCS platform through consistent variational formulations, employing both monolithic and staggered approaches. We conduct benchmark tests on various hydrogel structures, demonstrating that major differences arise from the chosen volumetric response of the hydrogel. The significance of this choice is frequently underestimated in the state-of-the-art literature but has been shown to have substantial implications on the resulting hydrogel behavior.

cs.CE↗

arXiv2024

Analysis of a combined Filtered/phase-field approach to topology optimization in elasticit

We advance a combined filtered/phase-field approach to topology optimization in the setting of linearized elasticity. Existence of minimizers is proved and rigorous parameter asymptotics are discussed by means of variational convergence techniques. Moreover, we investigate an abstract space discretization in the spirit of conformal finite elements. Eventually, stationarity is equivalently reformulated in terms of a Lagrangian.

math.OC↗

arXiv2021

Local approximate Gaussian process regression for data-driven constitutive laws: Development and comparison with neural networks

Hierarchical computational methods for multiscale mechanics such as the FE$^2$ and FE-FFT methods are generally accompanied by high computational costs. Data-driven approaches are able to speed the process up significantly by enabling to incorporate the effective micromechanical response in macroscale simulations without the need of performing additional computations at each Gauss point explicitly. Traditionally artificial neural networks (ANNs) have been the surrogate modeling technique of choice in the solid mechanics community. However they suffer from severe drawbacks due to their parametric nature and suboptimal training and inference properties for the investigated datasets in a three dimensional setting. These problems can be avoided using local approximate Gaussian process regression (laGPR). This method can allow the prediction of stress outputs at particular strain space locations by training local regression models based on Gaussian processes, using only a subset of the data for each local model, offering better and more reliable accuracy than ANNs. A modified Newton-Raphson approach is proposed to accommodate for the local nature of the laGPR approximation when solving the global structural problem in a FE setting. Hence, the presented work offers a complete and general framework enabling multiscale calculations combining a data-driven constitutive prediction using laGPR, and macroscopic calculations using an FE scheme that we test for finite-strain three-dimensional hyperelastic problems.

cs.CE↗

arXiv2021

Model-data-driven constitutive responses: application to a multiscale computational framework

Computational multiscale methods for analyzing and deriving constitutive responses have been used as a tool in engineering problems because of their ability to combine information at different length scales. However, their application in a nonlinear framework can be limited by high computational costs, numerical difficulties, and/or inaccuracies. In this paper, a hybrid methodology is presented which combines classical constitutive laws (model-based), a data-driven correction component, and computational multiscale approaches. A model-based material representation is locally improved with data from lower scales obtained by means of a nonlinear numerical homogenization procedure leading to a model-data-driven approach. Therefore, macroscale simulations explicitly incorporate the true microscale response, maintaining the same level of accuracy that would be obtained with online micro-macro simulations but with a computational cost comparable to classical model-driven approaches. In the proposed approach, both model and data play a fundamental role allowing for the synergistic integration between a physics-based response and a machine learning black-box. Numerical applications are implemented in two dimensions for different tests investigating both material and structural responses in large deformation.

stat.ML↗

arXiv2021

Mixed variational formulations for structural topology optimization based on the phase-field approach

We propose a variational principle combining a phase-field functional for structural topology optimization with a mixed (three-field) Hu-Washizu functional, then including directly in the formulation equilibrium, constitutive, and compatibility equations. The resulting mixed variational functional is then specialized to derive a classical topology optimization formulation (where the amount of material to be distributed is an \emph{a priori} assigned quantity acting as a global constraint for the problem) as well as a novel topology optimization formulation (where the amount of material to be distributed is minimized, hence with no pre imposed constraint for the problem). Both formulations are numerically solved by implementing a mixed finite element scheme, with the second approach avoiding the introduction of a global constraint, hence respecting the convenient local nature of the finite element discretization. Furthermore, within the proposed approach it is possible to obtain guidelines for settings proper values of phase-field-related simulation parameters and, thanks to the combined phase-field and Hu-Washizu rationale, a monolithic algorithm solution scheme can be easily adopted. An insightful and extensive numerical investigation results in a detailed convergence study and a discussion on the obtained final designs. The numerical results clearly highlight differences between the two formulations as well as advantages related to the monolithic solution strategy; numerical investigations address both two-dimensional and three-dimensional applications.

math.NA↗

arXiv2020

Electro-magneto-mechanically response of polycrystalline materials: Computational Homogenization via the Virtual Element Method

This work presents a study on the computational homogenization of electro-magneto-mechanically coupled problems through the Virtual Element Method (VEM). VE-approaches have great potential for the homogenization of the physical properties of heterogeneous polycrystalline microstructures with anisotropic grains. The flexibility in element shapes can be exploited for creating VE-mesh with a significant lower number of degrees of freedom if compared to finite element (FE) meshes, while maintaining a high accuracy. Evidence that VE-approaches outperform FEM are available in the literature, but only addressing purely-mechanic problems (i.e. elastic properties) and transversely anisotropic materials. The aim of this work is twofold. On one hand, the study compares VE-and FE-based numerical homogenization schemes for electro-mechanically coupled problems for different crystal lattice structures and degrees of elastic anisotropy. Within all considered materials, the VE-approach outperforms the FE-approach for the same number of nodes. On the other hand a hybrid microstructure made up by both electro-mechanical and magneto-mechanical grains is investigated resulting in a electro-magneto-mechanically coupled microstructure. Again, VEM provides a more accurate solution strategy.

cs.CE↗

arXiv2017

Collisions in shape memory alloys

We present here a model for instantaneous collisions in a solid made of shape memory alloys (SMA) by means of a predictive theory which is based on the introduction not only of macroscopic velocities and temperature, but also of microscopic velocities responsible of the austenite-martensites phase changes. Assuming time discontinuities for velocities, volume fractions and temperature, and applying the principles of thermodynamics for non-smooth evolutions together with constitutive laws typical of SMA, we end up with a system of nonlinearly coupled elliptic equations for which we prove an existence and uniqueness result in the 2 and 3 D cases. Finally, we also present numerical results for a SMA 2D solid subject to an external percussion by an hammer stroke.

math.AP↗