Searcharxiv⌕ Search

arXiv subjects

Michele Zorzi

Publications and source records attributed to Michele Zorzi.

At least 37 records · Page 2Linked to original sources

Federated Reinforcement Learning to Optimize Teleoperated Driving Networks

Several sixth generation (6G) use cases have tight requirements in terms of reliability and latency, in particular teleoperated driving (TD). To address those requirements, Predictive Quality of Service (PQoS), possibly combined with reinforcement learning (RL), has emerged as a valid approach to dynamically adapt the configuration of the TD application (e.g., the level of compression of automotive data) to the experienced network conditions. In this work, we explore different classes of RL algorithms for PQoS, namely MAB (stateless), SARSA (stateful on-policy), Q-Learning (stateful off-policy), and DSARSA and DDQN (with Neural Network (NN) approximation). We trained the agents in a federated learning (FL) setup to improve the convergence time and fairness, and to promote privacy and security. The goal is to optimize the trade-off between Quality of Service (QoS), measured in terms of the end-to-end latency, and Quality of Experience (QoE), measured in terms of the quality of the resulting compression operation. We show that Q-Learning uses a small number of learnable parameters, and is the best approach to perform PQoS in the TD scenario in terms of average reward, convergence, and computational cost.

cs.NI↗

Monitoring the Venice Lagoon: an IoT Cloud-Based Sensor Nerwork Approach

Monitoring the coastal area of the Venice Lagoon is of significant importance. While the impact of global warming is felt worldwide, coastal and littoral regions bear the brunt more prominently. These areas not only face the threat of rising sea levels but also contend with the escalating occurrence of seaquakes and floods. Additionally, the intricate ecosystems of rivers, seas, and lakes undergo profound transformations due to climate change and pollutants. Employing devices like the SENSWICH floating wireless sensor presented in this article and similar measurement instruments proves invaluable to automate environmental monitoring, hence eliminating the need for manual sampling campaigns. The utilization of wireless measurement devices offers cost-effectiveness, real-time analysis, and a reduction in human resource requirements. Storing data in cloud services further enhances the ability to monitor parameter changes over extended time intervals. In this article, we present an enhanced sensing device aimed at automating water quality assessment, while considering power consumption and reducing circuit complexity. Specifically, we will introduce the new schematic and circuit of SENSWICH which had changes in circuit and electronic aspects. Furthermore, we outline the methodology for aggregating data in a cloud service environment, such as Amazon Web Service (AWS), and using Grafana for visualization.

cs.NI↗

Optimizing Energy Efficiency of 5G RedCap Beam Management for Smart Agriculture Applications

Beam management in 5G NR involves the transmission and reception of control signals such as Synchronization Signal Blocks (SSBs), crucial for tasks like initial access and/or channel estimation. However, this procedure consumes energy, which is particularly challenging to handle for battery-constrained nodes such as RedCap devices. Specifically, in this work we study a mid-market Internet of Things (IoT) Smart Agriculture (SmA) deployment where an Unmanned Autonomous Vehicle (UAV) acts as a base station "from the sky" (UAV-gNB) to monitor and control ground User Equipments (UEs) in the field. Then, we formalize a multi-variate optimization problem to determine the optimal beam management design for RedCap SmA devices in order to reduce the energy consumption at the UAV-gNB. Specifically, we jointly optimize the transmission power and the beamwidth at the UAV-gNB. Based on the analysis, we derive the so-called "regions of feasibility," i.e., the upper limit(s) of the beam management parameters for which RedCap Quality of Service (QoS) and energy constraints are met. We study the impact of factors like the total transmission power at the gNB, the Signal-to-Noise Ratio (SNR) threshold for successful packet decoding, the number of UEs in the region, and the misdetection probability. Simulation results demonstrate that there exists an optimal configuration for beam management to promote energy efficiency, which depends on the speed of the UEs, the beamwidth, and other network parameters.

cs.NI↗

Adaptive Compression in Federated Learning via Side Information

The high communication cost of sending model updates from the clients to the server is a significant bottleneck for scalable federated learning (FL). Among existing approaches, state-of-the-art bitrate-accuracy tradeoffs have been achieved using stochastic compression methods -- in which the client $n$ sends a sample from a client-only probability distribution $q_{ϕ^{(n)}}$, and the server estimates the mean of the clients' distributions using these samples. However, such methods do not take full advantage of the FL setup where the server, throughout the training process, has side information in the form of a global distribution $p_θ$ that is close to the clients' distribution $q_{ϕ^{(n)}}$ in Kullback-Leibler (KL) divergence. In this work, we exploit this closeness between the clients' distributions $q_{ϕ^{(n)}}$'s and the side information $p_θ$ at the server, and propose a framework that requires approximately $D_{KL}(q_{ϕ^{(n)}}|| p_θ)$ bits of communication. We show that our method can be integrated into many existing stochastic compression frameworks to attain the same (and often higher) test accuracy with up to $82$ times smaller bitrate than the prior work -- corresponding to 2,650 times overall compression.

cs.LG↗

Downlink Clustering-Based Scheduling of IRS-Assisted Communications With Reconfiguration Constraints

Intelligent reflecting surfaces (IRSs) are being widely investigated as a potential low-cost and energy-efficient alternative to active relays for improving coverage in next-generation cellular networks. However, technical constraints in the configuration of IRSs should be taken into account in the design of scheduling solutions and the assessment of their performance. To this end, we examine an IRS-assisted time division multiple access (TDMA) cellular network where the reconfiguration of the IRS incurs a communication cost; thus, we aim at limiting the number of reconfigurations over time. Along these lines, we propose a clustering-based heuristic scheduling scheme that maximizes the cell sum capacity, subject to a fixed number of reconfigurations within a TDMA frame. First, the best configuration of each user equipment (UE), in terms of joint beamforming and optimal IRS configuration, is determined using an iterative algorithm. Then, we propose different clustering techniques to divide the UEs into subsets sharing the same sub-optimal IRS configuration, derived through distance- and capacity-based algorithms. Finally, UEs within the same cluster are scheduled accordingly. We provide extensive numerical results for different propagation scenarios, IRS sizes, and phase shifters quantization constraints, showing the effectiveness of our approach in supporting multi-user IRS systems with practical constraints.

eess.SP↗

Effective Communication with Dynamic Feature Compression

The remote wireless control of industrial systems is one of the major use cases for 5G and beyond systems: in these cases, the massive amounts of sensory information that need to be shared over the wireless medium may overload even high-capacity connections. Consequently, solving the effective communication problem by optimizing the transmission strategy to discard irrelevant information can provide a significant advantage, but is often a very complex task. In this work, we consider a prototypal system in which an observer must communicate its sensory data to a robot controlling a task (e.g., a mobile robot in a factory). We then model it as a remote Partially Observable Markov Decision Process (POMDP), considering the effect of adopting semantic and effective communication-oriented solutions on the overall system performance. We split the communication problem by considering an ensemble Vector Quantized Variational Autoencoder (VQ-VAE) encoding, and train a Deep Reinforcement Learning (DRL) agent to dynamically adapt the quantization level, considering both the current state of the environment and the memory of past messages. We tested the proposed approach on the well-known CartPole reference control problem, obtaining a significant performance increase over traditional approaches.

cs.LG↗

On the Energy Consumption of UAV Edge Computing in Non-Terrestrial Networks

During the last few years, the use of Unmanned Aerial Vehicles (UAVs) equipped with sensors and cameras has emerged as a cutting-edge technology to provide services such as surveillance, infrastructure inspections, and target acquisition. However, this approach requires UAVs to process data onboard, mainly for person/object detection and recognition, which may pose significant energy constraints as UAVs are battery-powered. A possible solution can be the support of Non-Terrestrial Networks (NTNs) for edge computing. In particular, UAVs can partially offload data (e.g., video acquisitions from onboard sensors) to more powerful upstream High Altitude Platforms (HAPs) or satellites acting as edge computing servers to increase the battery autonomy compared to local processing, even though at the expense of some data transmission delays. Accordingly, in this study we model the energy consumption of UAVs, HAPs, and satellites considering the energy for data processing, offloading, and hovering. Then, we investigate whether data offloading can improve the system performance. Simulations demonstrate that edge computing can improve both UAV autonomy and end-to-end delay compared to onboard processing in many configurations.

cs.NI↗

A Distributed Neural Linear Thompson Sampling Framework to Achieve URLLC in Industrial IoT

Industrial Internet of Things (IIoT) networks will provide Ultra-Reliable Low-Latency Communication (URLLC) to support critical processes underlying the production chains. However, standard protocols for allocating wireless resources may not optimize the latency-reliability trade-off, especially for uplink communication. For example, centralized grant-based scheduling can ensure almost zero collisions, but introduces delays in the way resources are requested by the User Equipments (UEs) and granted by the gNB. In turn, distributed scheduling (e.g., based on random access), in which UEs autonomously choose the resources for transmission, may lead to potentially many collisions especially when the traffic increases. In this work we propose DIStributed combinatorial NEural linear Thompson Sampling (DISNETS), a novel scheduling framework that combines the best of the two worlds. By leveraging a feedback signal from the gNB and reinforcement learning, the UEs are trained to autonomously optimize their uplink transmissions by selecting the available resources to minimize the number of collisions, without additional message exchange to/from the gNB. DISNETS is a distributed, multi-agent adaptation of the Neural Linear Thompson Sampling (NLTS) algorithm, which has been further extended to admit multiple parallel actions. We demonstrate the superior performance of DISNETS in addressing URLLC in IIoT scenarios compared to other baselines.

cs.NI↗

Preliminary Performance Evaluation of a Satellite-to-HAP Communication Link

The emergence of Fifth-Generation (5G) communication networks has brought forth unprecedented connectivity with ultra-low latency, high data rates, and pervasive coverage. However, meeting the increasing demands of applications for seamless and high-quality communication, especially in rural areas, requires exploring innovative solutions that expand 5G beyond traditional terrestrial networks. Within the context of Non-Terrestrial Networks (NTNs), two promising technologies with vast potential are High Altitude Platforms (HAPs) and satellites. The combination of these two platforms is able to provide wide coverage and reliable communication in remote and inaccessible areas, and/or where terrestrial infrastructure is unavailable. This study evaluates the performance of the communication link between a Geostationary Equatorial Orbit (GEO) satellite and a HAP using the Internet of Drones Simulator (IoD-Sim), implemented in ns-3 and incorporating the 3GPP TR 38.811 channel model. The code base of IoD-Sim is extended to simulate HAPs, accounting for the Earths curvature in various geographic coordinate systems, and considering realistic mobility patterns. A simulation campaign is conducted to evaluate the GEO-to-HAP communication link in terms of Signal-to-Noise Ratio (SNR) in two different scenarios, considering the mobility of the HAP, and as a function of the frequency and the distance.

cs.NI↗

Minimizing Energy Consumption for 5G NR Beam Management for RedCap Devices

In 5G New Radio (NR), beam management entails periodic and continuous transmission and reception of control signals in the form of synchronization signal blocks (SSBs), used to perform initial access and/or channel estimation. However, this procedure demands continuous energy consumption, which is particularly challenging to handle for low-cost, low-complexity, and battery-constrained devices, such as RedCap devices to support mid-market Internet of Things (IoT) use cases. In this context, this work aims at reducing the energy consumption during beam management for RedCap devices, while ensuring that the desired Quality of Service (QoS) requirements are met. To do so, we formalize an optimization problem in an Indoor Factory (InF) scenario to select the best beam management parameters, including the beam update periodicity and the beamwidth, to minimize energy consumption based on users' distribution and their speed. The analysis yields the regions of feasibility, i.e., the upper limit(s) on the beam management parameters for RedCap devices, that we use to provide design guidelines accordingly.

cs.NI↗

SeBaSi system-level Integrated Access and Backhaul simulator for self-backhauling

millimeter wave (mmWave) and sub-terahertz (THz) communications have the potential of increasing mobile network throughput drastically. However, the challenging propagation conditions experienced at mmWave and beyond frequencies can potentially limit the range of the wireless link down to a few meters, compared to up to kilometers for sub-6GHz links. Thus, increasing the density of base station deployments is required to achieve sufficient coverage in the Radio Access Network (RAN). To such end, 3rd Generation Partnership Project (3GPP) introduced wireless backhauled base stations with Integrated Access and Backhaul (IAB), a key technology to achieve dense networks while preventing the need for costly fiber deployments. In this paper, we introduce SeBaSi, a system-level simulator for IAB networks, and demonstrate its functionality by simulating IAB deployments in Manhattan, New York City and Padova. Finally, we show how SeBaSi can represent a useful tool for the performance evaluation of self-backhauled cellular networks, thanks to its high level of network abstraction, coupled with its open and customizable design, which allows users to extend it to support novel technologies such as Reconfigurable Intelligent Surfaces (RISs)

cs.NI↗

Modeling Interference for the Coexistence of 6G Networks and Passive Sensing Systems

Future wireless networks and sensing systems will benefit from access to large chunks of spectrum above 100 GHz, to achieve terabit-per-second data rates in 6th Generation (6G) cellular systems and improve accuracy and reach of Earth exploration and sensing and radio astronomy applications. These are extremely sensitive to interference from artificial signals, thus the spectrum above 100 GHz features several bands which are protected from active transmissions under current spectrum regulations. To provide more agile access to the spectrum for both services, active and passive users will have to coexist without harming passive sensing operations. In this paper, we provide the first, fundamental analysis of Radio Frequency Interference (RFI) that large-scale terrestrial deployments introduce in different satellite sensing systems now orbiting the Earth. We develop a geometry-based analysis and extend it into a data-driven model which accounts for realistic propagation, building obstruction, ground reflection, for network topology with up to $10^5$ nodes in more than $85$ km$^2$. We show that the presence of harmful RFI depends on several factors, including network load, density and topology, satellite orientation, and building density. The results and methodology provide the foundation for the development of coexistence solutions and spectrum policy towards 6G.

eess.SP↗

Semantic Communication of Learnable Concepts

We consider the problem of communicating a sequence of concepts, i.e., unknown and potentially stochastic maps, which can be observed only through examples, i.e., the mapping rules are unknown. The transmitter applies a learning algorithm to the available examples, and extracts knowledge from the data by optimizing a probability distribution over a set of models, i.e., known functions, which can better describe the observed data, and so potentially the underlying concepts. The transmitter then needs to communicate the learned models to a remote receiver through a rate-limited channel, to allow the receiver to decode the models that can describe the underlying sampled concepts as accurately as possible in their semantic space. After motivating our analysis, we propose the formal problem of communicating concepts, and provide its rate-distortion characterization, pointing out its connection with the concepts of empirical and strong coordination in a network. We also provide a bound for the distortion-rate function.

cs.IT↗

Implementation of a Channel Model for Non-Terrestrial Networks in ns-3

While the 5th generation (5G) of mobile networks has landed in the commercial area, the research community is exploring new functionalities for 6th generation (6G) networks, for example non-terrestrial networks (NTNs) via space/air nodes such as Unmanned Aerial Vehicles (UAVs), High Altitute Platforms (HAPs) or satellites. Specifically, satellite-based communication offers new opportunities for future wireless applications, such as providing connectivity to remote or otherwise unconnected areas, complementing terrestrial networks to reduce connection downtime, as well as increasing traffic efficiency in hot spot areas. In this context, an accurate characterization of the NTN channel is the first step towards proper protocol design. Along these lines, this paper provides an ns-3 implementation of the 3rd Generation Partnership Project (3GPP) channel and antenna models for NTN described in Technical Report 38.811. In particular, we extend the ns-3 code base with new modules to implement the attenuation of the signal in air/space due to atmospheric gases and scintillation, and new mobility and fading models to account for the Geocentric Cartesian coordinate system of satellites. Finally, we validate the accuracy of our ns-3 module via simulations against 3GPP calibration results

cs.NI↗

Improving the Efficiency of MIMO Simulations in ns-3

Channel modeling is a fundamental task for the design and evaluation of wireless technologies and networks, before actual prototyping, commercial product development and real deployments. The recent trends of current and future mobile networks, which include large antenna systems, massive deployments, and high-frequency bands, require complex channel models for the accurate simulation of massive MIMO in mmWave and THz bands. To address the complexity/accuracy trade-off, a spatial channel model has been defined by 3GPP (TR 38.901), which has been shown to be the main bottleneck of current system-level simulations in ns-3. In this paper, we focus on improving the channel modeling efficiency for large-scale MIMO system-level simulations. Extensions are developed in two directions. First, we improve the efficiency of the current 3GPP TR 38.901 implementation code in ns-3, by allowing the use of the Eigen library for more efficient matrix algebra operations, among other optimizations and a more modular code structure. Second, we propose a new performance-oriented MIMO channel model for reduced complexity, as an alternative model suitable for mmWave}/THz bands, and calibrate it against the 3GPP TR 38.901 model. Simulation results demonstrate the proper calibration of the newly introduced model for various scenarios and channel conditions, and exhibit an effective reduction of the simulation time (up to 16 times compared to the previous baseline) thanks to the various proposed improvements.

cs.NI↗

ns-3 Implementation of Sub-Terahertz and Millimeter Wave Drop-based NYU Channel Model (NYUSIM)

The next generation of wireless networks will use sub-THz frequencies alongside mmWave frequencies to enable multi-Gbps and low-latency applications. To enable different verticals and use cases, engineers must take a holistic approach to build, analyze, and study different parts of the network and the interplay among the lower and higher layers of the protocol stack. It is of paramount importance to accurately characterize the radio propagation in diverse scenarios such as urban microcell (UMi), urban macrocell (UMa), rural macrocell (RMa), indoor hotspot (InH), and indoor factory (InF) for a wide range of frequencies. The 3GPP statistical channel model (SCM) is oversimplified and restricted to the frequency range of 0.5-100 GHz. Thus, to overcome these limitations, this paper presents a detailed implementation of the drop-based NYU channel model (NYUSIM) for the frequency range of 0.5-150 GHz for the UMi, UMa, RMa, InH, and InF scenarios. NYUSIM allows researchers to design and evaluate new algorithms and protocols for future sub-THz wireless networks in ns-3.

cs.IT↗

Golden Modulation: a New and Effective Waveform for Massive IoT

This paper considers massive Internet of Things systems, especially for LoW Power Wide Area Networks, that aim at connecting billions of low-cost devices with multi-year battery life requirements. Current systems for massive Internet of Things exhibit severe problems when trying to pursue the target of serving a very large number of users. In this paper, a novel asynchronous spread spectrum modulation, called Golden Modulation, is introduced. This modulation provides a vast family of equivalent waveforms with very low cross-interference even in asynchronous conditions, hence enabling natural multiuser operation without the need for inter-user synchronization or for interference cancellation receivers. Thanks to minimal interference between waveforms, coupled with the absence of coordination requirements, this modulation can accommodate very high system capacity. The basic modulation principles, relying on spectrum spreading via direct Zadoff-Chu sequences modulation, are presented and the corresponding theoretical bit error rate performance in an additive white Gaussian noise channel is derived and compared by simulation with realistic Golden Modulation receiver performance. The demodulation of the Golden Modulation is also described, and its performance in the presence of uncoordinated multiple users is characterized.

cs.IT↗

A Markov Game of Age of Information From Strategic Sources With Full Online Information

We investigate the performance of concurrent remote sensing from independent strategic sources, whose goal is to minimize a linear combination of the freshness of information and the updating cost. In the literature, this is often investigated from a static perspective of setting the update rate of the sources a priori, either in a centralized optimal way or with a distributed game-theoretic approach. However, we argue that truly rational sources would better make such a decision with full awareness of the current age of information, resulting in a more efficient implementation of the updating policies. To this end, we investigate the scenario where sources independently perform a stateful optimization of their objective. Their strategic character leads to the formalization of this problem as a Markov game, for which we find the resulting Nash equilibrium. This can be translated into practical smooth threshold policies for their update. The results are eventually tested in a sample scenario, comparing a centralized optimal approach with two distributed approaches with different objectives for the players.

cs.GT↗