SearcharxivSearch

arXiv subjects

Mien Van

Publications and source records attributed to Mien Van.

15 recordsLinked to original sources

A Digital Twin Framework for Reinforcement Learning with Real-Time Self-Improvement via Human Assistive Teleoperation

Reinforcement Learning (RL) or Deep Reinforcement Learning (DRL) is a powerful approach to solving Markov Decision Processes (MDPs) when the model of the environment is not known a priori. However, RL models are still faced with challenges such as handling covariate shifts and ensuring the quality of human demonstration. To address these challenges and further advance DRL models, our work develops a human-in-the-loop DRL framework via digital twin that leverages human intelligence after deployment to retrain the DRL model in real time. First, we develop a pre-trained model fully based on learning through trial and error in the simulated environment allowing scalability and automation while eliminating variability and biases that can come from subjective human guidance. Second, instead of deploying the trained model directly on the UGV, we create a digital twin which controls the physical UGV from the virtual environment. Third, to allow continuous learning without catastrophic forgetting, we introduce the ability of the model to self-improve with the help of small human guidance at the start of the retraining. We test the performance of our proposed model in both simulation and real-world environments with both static and dynamic obstacles. The results indicate that our proposed approach not only outperforms the baseline models in terms of reward accumulation but also demonstrates superior training efficiency.

eess.SY

Real-Time Reconfiguration and Connectivity Maintenance for AUVs Network Under External Disturbances using Distributed Nonlinear Model Predictive Control

Advancements in underwater vehicle technology have significantly expanded the potential scope for deploying autonomous or remotely operated underwater vehicles in novel practical applications. However, the efficiency and maneuverability of these vehicles remain critical challenges, particularly in the dynamic aquatic environment. In this work, we propose a novel control scheme for creating multi-agent distributed formation control with limited communication between individual agents. In addition, the formation of the multi-agent can be reconfigured in real-time and the network connectivity can be maintained. The proposed use case for this scheme includes creating underwater mobile communication networks that can adapt to environmental or network conditions to maintain the quality of communication links for long-range exploration, seabed monitoring, or underwater infrastructure inspection. This work introduces a novel Distributed Nonlinear Model Predictive Control (DNMPC) strategy, integrating Control Lyapunov Functions (CLF) and Control Barrier Functions (CBF) with a relaxed decay rate, specifically tailored for 6-DOF underwater robotics. The effectiveness of our proposed DNMPC scheme was demonstrated through rigorous MATLAB simulations for trajectory tracking and formation reconfiguration in a dynamic environment. Our findings, supported by tests conducted using Software In The Loop (SITL) simulation, confirm the approach's applicability in real-time scenarios.

eess.SY

A Twin Delayed Deep Deterministic Policy Gradient Algorithm for Autonomous Ground Vehicle Navigation via Digital Twin Perception Awareness

Autonomous ground vehicle (UGV) navigation has the potential to revolutionize the transportation system by increasing accessibility to disabled people, ensure safety and convenience of use. However, UGV requires extensive and efficient testing and evaluation to ensure its acceptance for public use. This testing are mostly done in a simulator which result to sim2real transfer gap. In this paper, we propose a digital twin perception awareness approach for the control of robot navigation without prior creation of the virtual environment (VT) environment state. To achieve this, we develop a twin delayed deep deterministic policy gradient (TD3) algorithm that ensures collision avoidance and goal-based path planning. We demonstrate the performance of our approach on different environment dynamics. We show that our approach is capable of efficiently avoiding collision with obstacles and navigating to its desired destination, while at the same time safely avoids obstacles using the information received from the LIDAR sensor mounted on the robot. Our approach bridges the gap between sim-to-real transfer and contributes to the adoption of UGVs in real world. We validate our approach in simulation and a real-world application in an office space.

cs.RO

Digital Twin-Driven Reinforcement Learning for Obstacle Avoidance in Robot Manipulators: A Self-Improving Online Training Framework

The evolution and growing automation of collaborative robots introduce more complexity and unpredictability to systems, highlighting the crucial need for robot's adaptability and flexibility to address the increasing complexities of their environment. In typical industrial production scenarios, robots are often required to be re-programmed when facing a more demanding task or even a few changes in workspace conditions. To increase productivity, efficiency and reduce human effort in the design process, this paper explores the potential of using digital twin combined with Reinforcement Learning (RL) to enable robots to generate self-improving collision-free trajectories in real time. The digital twin, acting as a virtual counterpart of the physical system, serves as a 'forward run' for monitoring, controlling, and optimizing the physical system in a safe and cost-effective manner. The physical system sends data to synchronize the digital system through the video feeds from cameras, which allows the virtual robot to update its observation and policy based on real scenarios. The bidirectional communication between digital and physical systems provides a promising platform for hardware-in-the-loop RL training through trial and error until the robot successfully adapts to its new environment. The proposed online training framework is demonstrated on the Unfactory Xarm5 collaborative robot, where the robot end-effector aims to reach the target position while avoiding obstacles. The experiment suggest that proposed framework is capable of performing policy online training, and that there remains significant room for improvement.

cs.RO

Adaptive Safety-critical Control with Uncertainty Estimation for Human-robot Collaboration

In advanced manufacturing, strict safety guarantees are required to allow humans and robots to work together in a shared workspace. One of the challenges in this application field is the variety and unpredictability of human behavior, leading to potential dangers for human coworkers. This paper presents a novel control framework by adopting safety-critical control and uncertainty estimation for human-robot collaboration. Additionally, to select the shortest path during collaboration, a novel quadratic penalty method is presented. The innovation of the proposed approach is that the proposed controller will prevent the robot from violating any safety constraints even in cases where humans move accidentally in a collaboration task. This is implemented by the combination of a time-varying integral barrier Lyapunov function (TVIBLF) and an adaptive exponential control barrier function (AECBF) to achieve a flexible mode switch between path tracking and collision avoidance with guaranteed closed-loop system stability. The performance of our approach is demonstrated in simulation studies on a 7-DOF robot manipulator. Additionally, a comparison between the tasks involving static and dynamic targets is provided.

cs.RO

An NMPC-ECBF Framework for Dynamic Motion Planning and Execution in vision-based Human-Robot Collaboration

To enable safe and effective human-robot collaboration (HRC) in smart manufacturing, seamless integration of sensing, cognition, and prediction into the robot controller is critical for real-time awareness, response, and communication inside a heterogeneous environment (robots, humans, and equipment). The proposed approach takes advantage of the prediction capabilities of nonlinear model predictive control (NMPC) to execute a safe path planning based on feedback from a vision system. In order to satisfy the requirement of real-time path planning, an embedded solver based on a penalty method is applied. However, due to tight sampling times NMPC solutions are approximate, and hence the safety of the system cannot be guaranteed. To address this we formulate a novel safety-critical paradigm with an exponential control barrier function (ECBF) used as a safety filter. We also design a simple human-robot collaboration scenario using V-REP to evaluate the performance of the proposed controller and investigate whether integrating human pose prediction can help with safe and efficient collaboration. The robot uses OptiTrack cameras for perception and dynamically generates collision-free trajectories to the predicted target interactive position. Results for a number of different configurations confirm the efficiency of the proposed motion planning and execution framework. It yields a 19.8% reduction in execution time for the HRC task considered.

cs.RO

Fixed-time Adaptive Neural Control for Physical Human-Robot Collaboration with Time-Varying Workspace Constraints

Physical human-robot collaboration (pHRC) requires both compliance and safety guarantees since robots coordinate with human actions in a shared workspace. This paper presents a novel fixed-time adaptive neural control methodology for handling time-varying workspace constraints that occur in physical human-robot collaboration while also guaranteeing compliance during intended force interactions. The proposed methodology combines the benefits of compliance control, time-varying integral barrier Lyapunov function (TVIBLF) and fixed-time techniques, which not only achieve compliance during physical contact with human operators but also guarantee time-varying workspace constraints and fast tracking error convergence without any restriction on the initial conditions. Furthermore, a neural adaptive control law is designed to compensate for the unknown dynamics and disturbances of the robot manipulator such that the proposed control framework is overall fixed-time converged and capable of online learning without any prior knowledge of robot dynamics and disturbances. The proposed approach is finally validated on a simulated two-link robot manipulator. Simulation results show that the proposed controller is superior in the sense of both tracking error and convergence time compared with the existing barrier Lyapunov functions based controllers, while simultaneously guaranteeing compliance and safety.

cs.RO

Distributed Fixed-Time Consensus Control for Multiple AUV Systems with Input Saturations

This study proposes a new distributed control method based on an adaptive fuzzy control for multiple collaborative autonomous underwater vehicles (AUVs) to track a desired formation shape within a fixed time. First, a formation control protocol based on a fixed-time backstepping sliding mode control is designed, in which the consensus cooperative tracking errors for each AUV will be formulated. Then, to compensate for the saturated control torques, an adaptive auxiliary variable is introduced. Finally, a fixed-time adaptive fuzzy logic control (FLC) is derived to approximate the unknown dynamics, in which the adaptive laws of the FLC is derived such that the adaptive signals and errors can be convergent within a fixed time. The fixed time convergence is desired in practice because it provides an exciting property that the global convergence of the whole system is independent with the initial states of the AUVs. The computer simulation results for a consensus formation control of four AUVs show that the proposed formation control can provide high tracking performance with lower and smoother control efforts

eess.SY

Digital Twins for Marine Operations: A Brief Review on Their Implementation

While the concept of a digital twin to support maritime operations is gaining attention for predictive maintenance, real-time monitoring, control, and overall process optimization, clarity on its implementation is missing in the literature. Therefore, in this review we show how different authors implemented their digital twins, discuss our findings, and finally give insights on future research directions.

eess.SY

Reinforcement Learning-Enhanced Control Barrier Functions for Robot Manipulators

In this paper we present the implementation of a Control Barrier Function (CBF) using a quadratic program (QP) formulation that provides obstacle avoidance for a robotic manipulator arm system. CBF is a control technique that has emerged and developed over the past decade and has been extensively explored in the literature on its mathematical foundations, proof of set invariance and potential applications for a variety of safety-critical control systems. In this work we will look at the design of CBF for the robotic manipulator obstacle avoidance, discuss the selection of the CBF parameters and present a Reinforcement Learning (RL) scheme to assist with finding parameters values that provide the most efficient trajectory to successfully avoid different sized obstacles. We then create a data-set across a range of scenarios used to train a Neural-Network (NN) model that can be used within the control scheme to allow the system to efficiently adapt to different obstacle scenarios. Computer simulations (based on Matlab/Simulink) demonstrate the effectiveness of the proposed algorithm.

cs.RO

Enhancing Mobile Robot Navigation Safety and Efficiency through NMPC with Relaxed CBF in Dynamic Environments

In this paper, a safety-critical control strategy for a nonholonomic robot is developed to generate control signals that result in optimal, obstacle-free paths through dynamic environments. We formulate the control synthesis problem as an Optimal Control Problem (OCP) that enforces Control Lyapunov Function (CLF) constraints for system stability as well as safety-critical constraints using Control Barrier Function (CBF) with a relaxing decay rate of the barrier function. A Nonlinear Model Predictive Control (NMPC) integrates with CLF and CBF to ensure system safety and facilitate optimal performance within a short prediction horizon, reducing the computational burden in real-time implementation. Additionally, we incorporate an obstacle avoidance constraint based on the Euclidean norm into the NMPC framework, showcasing the CBF approach's superiority in addressing mobile robotic systems' point stabilisation and trajectory tracking challenges. Through extensive simulations, the proposed controller demonstrates proficiency in static and dynamic obstacle avoidance under various scenarios. Experimental validations conducted using the Husky A200 robot align with simulation results, reinforcing the applicability of our proposed approach in real-world scenarios, notably improving the computational efficiency and safety in practical mobile robot applications.

eess.SY

Adaptive Admittance Control for Safety-Critical Physical Human Robot Collaboration

Physical human-robot collaboration requires strict safety guarantees since robots and humans work in a shared workspace. This letter presents a novel control framework to handle safety-critical position-based constraints for human-robot physical interaction. The proposed methodology is based on admittance control, exponential control barrier functions (ECBFs) and quadratic program (QP) to achieve compliance during the force interaction between human and robot, while simultaneously guaranteeing safety constraints. In particular, the formulation of admittance control is rewritten as a second-order nonlinear control system, and the interaction forces between humans and robots are regarded as the control input. A virtual force feedback for admittance control is provided in real-time by using the ECBFs-QP framework as a compensator of the external human forces. A safe trajectory is therefore derived from the proposed adaptive admittance control scheme for a low-level controller to track. The innovation of the proposed approach is that the proposed controller will enable the robot to comply with human forces with natural fluidity without violation of any safety constraints even in cases where human external forces incidentally force the robot to violate constraints. The effectiveness of our approach is demonstrated in simulation studies on a two-link planar robot manipulator.

cs.RO

Fixed-time Integral Sliding Mode Control for Admittance Control of a Robot Manipulator

This paper proposes a novel fixed-time integral sliding mode controller for admittance control to enhance physical human-robot collaboration. The proposed method combines the benefits of compliance to external forces of admittance control and high robustness to uncertainties of integral sliding mode control (ISMC), such that the system can collaborate with a human partner in an uncertain environment effectively. Firstly, a fixed-time sliding surface is applied in the ISMC to make the tracking error of the system converge within a fixed-time regardless of the initial condition. Then, a fixed-time backstepping controller (BSP) is integrated into the ISMC as the nominal controller to realize global fixed-time convergence. Furthermore, to overcome the singularity problem, a non-singular fixed-time sliding surface is designed and integrated into the controller, which is useful for practical application. Finally, the proposed controller is validated for a two-link robot manipulator with uncertainties and external human forces. The results show that the proposed controller is superior in the sense of both tracking error and convergence time, and at the same time, can comply with human motion in a shared workspace.

cs.RO

Towards More Efficient EfficientDets and Low-Light Real-Time Marine Debris Detection

Marine debris is a problem both for the health of marine environments and for the human health since tiny pieces of plastic called "microplastics" resulting from the debris decomposition over the time are entering the food chain at any levels. For marine debris detection and removal, autonomous underwater vehicles (AUVs) are a potential solution. In this letter, we focus on the efficiency of AUV vision for real-time and low-light object detection. First, we improved the efficiency of a class of state-of-the-art object detectors, namely EfficientDets, by 1.5% AP on D0, 2.6% AP on D1, 1.2% AP on D2 and 1.3% AP on D3 without increasing the GPU latency. Subsequently, we created and made publicly available a dataset for the detection of in-water plastic bags and bottles and trained our improved EfficientDets on this and another dataset for marine debris detection. Finally, we investigated how the detector performance is affected by low-light conditions and compared two low-light underwater image enhancement strategies both in terms of accuracy and latency. Source code and dataset are publicly available.

cs.CV

Non-local Graph Convolutional Network for joint Activity Recognition and Motion Prediction

3D skeleton-based motion prediction and activity recognition are two interwoven tasks in human behaviour analysis. In this work, we propose a motion context modeling methodology that provides a new way to combine the advantages of both graph convolutional neural networks and recurrent neural networks for joint human motion prediction and activity recognition. Our approach is based on using an LSTM encoder-decoder and a non-local feature extraction attention mechanism to model the spatial correlation of human skeleton data and temporal correlation among motion frames. The proposed network can easily include two output branches, one for Activity Recognition and one for Future Motion Prediction, which can be jointly trained for enhanced performance. Experimental results on Human 3.6M, CMU Mocap and NTU RGB-D datasets show that our proposed approach provides the best prediction capability among baseline LSTM-based methods, while achieving comparable performance to other state-of-the-art methods.

cs.CV