arXiv subjects

Miguel A. L. Marques

Publications and source records attributed to Miguel A. L. Marques.

At least 37 records · Page 2Linked to original sources

arXiv2025

Theory of Superconductivity in LaRu$_3$Si$_2$ and Predictions of New Kagome Flat Band Superconductors

We present a comprehensive investigation of the flat-band kagome superconductor LaRu$_3$Si$_2$, which has recently been reported to host charge density wave (CDW) order above room temperature ($T_{CDW} \simeq 400$ K). The stable crystal structure above the CDW transition is identified via soft phonon condensation and confirmed to be harmonically stable through ab initio calculations, consistent with recent X-ray diffraction refinements. The electron-phonon coupling (EPC) in LaRu$_3$Si$_2$ is found to be mode-selective, primarily driven by strong interactions between Ru-$B_{3u}$ phonons (local $x$-direction, pointing toward the hexagon center) and Ru-$A_g$ electrons (local $d_{x^2-y^2}$ orbital) within the kagome lattice. Using a spring-ball model, we identify this mode-selective EPC as a universal feature of kagome materials. Employing the newly developed Gaussian approximation of the hopping parameters, we derive an analytical expression for the EPC and demonstrate that superconductivity in LaRu$_3$Si$_2$ is mostly driven by the coupling between the kagome $B_{3u}$ phonons and the $A_g$ electrons. The impact of doping is also investigated, revealing that light hole doping (approximately one hole per unit cell) significantly enhances the superconducting critical temperature $T_c$ by 50%, whereas heavy doping induces structural instability and ferromagnetism. Furthermore, high-throughput screening identifies 3063 stable 1:3:2 kagome materials, of which 428 are predicted to exhibit superconductivity with $T_c > 1$ K, and the highest $T_c$ reaching 15 K. These findings establish LaRu$_3$Si$_2$ and related materials as promising platforms for exploring the interplay among kagome flat bands, EPC, and superconductivity. Additionally, they may offer valuable insights into potential limitations on the $T_c$ of flat-band superconductivity in real materials.

cond-mat.supr-con↗

arXiv2025

High-throughput study of kagome compounds in the AV3Sb5 family

The kagome lattice has emerged as a fertile ground for exotic quantum phenomena, including superconductivity, charge density waves, and topologically nontrivial states. While AV3Sb5 (A = K, Rb, Cs) compounds have been extensively studied in this context, the broader AB3C5 family remains largely unexplored. In this work, we employ machine-learning-accelerated, high-throughput density functional theory calculations to systematically investigate the stability and electronic properties of kagome materials derived from atomic substitutions in the AV3Sb5 structure. We identify 36 promising candidates that are thermodynamically stable, with many more close to the convex hull. Stable compounds are not only found with a pnictogen (Sb or Bi) as the C atom but also with Au, Hg, Tl, and Ce. This diverse chemistry opens the way to tune the electronic properties of the compounds. In fact, many of these compounds exhibit Dirac points, Van Hove singularities, or flat bands close to the Fermi level. Our findings provide an array of compounds for experimental synthesis and further theoretical exploration of kagome superconductors beyond the already known systems.

cond-mat.mtrl-sci↗

arXiv2025

A non-orthogonal representation of the chemical space

We present a novel approach to generate a fingerprint for crystalline materials that balances efficiency for machine processing and human interpretability, allowing its application in both machine learning inference and understanding of structure-property relationships. Our proposed material encoding has two components: one representing the crystal structure and the other characterizing the chemical composition, that we call Pettifor embedding. For the latter we construct a non-orthogonal space where each axis represents a chemical element and where the angle between the axes quantifies a measure of the similarity between them. The chemical composition is then defined by the point on the unit sphere in this non-orthogonal space. We show that the Pettifor embeddings systematically outperform other commonly used elemental embeddings in compositional machine learning models. Using the Pettifor embeddings to define a distance metric and applying dimension reduction techniques, we construct a two-dimensional global map of the space of thermodynamically stable crystalline compounds. Despite their simplicity, such maps succeed in providing a physical separation of material classes according to basic physical properties.

cond-mat.mtrl-sci↗

arXiv2025

The Maximum $T_c$ of Conventional Superconductors at Ambient Pressure

The theoretical maximum critical temperature ($T_c$) for conventional superconductors at ambient pressure remains a fundamental question in condensed matter physics. Through analysis of electron-phonon calculations for over 20,000 metals, we critically examine this question. We find that while hydride metals can exhibit maximum phonon frequencies of more than 5000 K, the crucial logarithmic average frequency $ω_\text{log}$ rarely exceeds 1800 K. Our data reveals an inherent trade-off between $ω_\text{log}$ and the electron-phonon coupling constant $λ$, suggesting that the optimal Eliashberg function that maximizes $T_c$ is unphysical. Based on our calculations, we identify Li$_2$AgH$_6$ and its sibling Li$_2$AuH$_6$ as theoretical materials that likely approach the practical limit for conventional superconductivity at ambient pressure. Analysis of thermodynamic stability indicates that compounds with higher predicted $T_c$ values are increasingly unstable, making their synthesis challenging. While fundamental physical laws do not strictly limit $T_c$ to low-temperatures, our analysis suggests that achieving room-temperature conventional superconductivity at ambient pressure is extremely unlikely.

cond-mat.supr-con↗

arXiv2025

A generative material transformer using Wyckoff representation

Materials play a critical role in various technological applications. Identifying and enumerating stable compounds, those near the convex hull, is therefore essential. Despite recent progress, generative models either have a relatively low rate of stable compounds, are computationally expensive, or lack symmetry. In this work we present Matra-Genoa, an autoregressive transformer model built on invertible tokenized representations of symmetrized crystals, including free coordinates. This approach enables sampling from a hybrid action space. The model is trained across the periodic table and space groups and can be conditioned on specific properties. We demonstrate its ability to generate stable, novel, and unique crystal structures by conditioning on the distance to the convex hull. Resulting structures are 8 times more likely to be stable than baselines using PyXtal with charge compensation, while maintaining high computational efficiency. We also release a dataset of 3 million unique crystals generated by our method, including 4,000 compounds verified by density-functional theory to be within 0.001 eV/atom of the convex hull.

cond-mat.mtrl-sci↗

arXiv2024

Ambient pressure high temperature superconductivity in RbPH$_3$ facilitated by ionic anharmonicity

Recent predictions of metastable high-temperature hydride superconductors give hope that superconductivity at ambient conditions is within reach. In this work, we predict RbPH$_3$ as a new compound with a superconducting critical temperature around 100 K at ambient pressure, dynamically stabilized thanks to ionic quantum anharmonic effects. RbPH$_3$ is thermodynamically stable at 30 GPa in a perovskite $Pm\bar{3}m$ phase, allowing its experimental synthesis at moderate pressures far from the megabar regime. With lowering pressure it is expected to transform to a $R3m$ phase that should stay dynamically stable thanks to quantum fluctuations down to ambient pressures. Both phases are metallic, with the $R3m$ phase having three distinct Fermi surfaces, composed mostly of states with phosphorus and hydrogen character. The structures are held together by strong P-H covalent bonds, resembling the pattern observed in the high-temperature superconducting H$_3$S, with extra electrons donated by rubidium. These results demonstrate that quantum ionic fluctuations, neglected thus far in high-throughput calculations, can stabilize at ambient pressure hydride superconductors with a high critical temperature.

cond-mat.supr-con↗

arXiv2024

In-architecture X-ray assisted C-Br dissociation for on-surface fabrication of diamondoid chains

The fabrication of well-defined, low-dimensional diamondoid-based materials is a promising approach for tailoring diamond properties such as superconductivity. On-surface self-assembly of halogenated diamondoids under ultrahigh vacuum conditions represents an effective strategy in this direction, enabling reactivity exploration and on-surface synthesis approaches. Here we demonstrate through scanning probe microscopy, time-of-flight mass spectrometry and photoelectron spectroscopy, that self-assembled layers of dibromodiamantanes on gold can be debrominated at atomic wavelengths (Al K$α$ at 8.87 $\mathring{A}$ and Mg K$α$ at 9.89 $\mathring{A}$) and low temperatures without affecting their well-defined arrangement. The resulting 'in-architecture' debromination enables the fabrication of diamantane chains from self-assembled precursors in close proximity, which is otherwise inaccessible through annealing on metal surfaces. Our work introduces a novel approach for the fabrication of nanodiamond chains, with significant implications for in-architecture and layer-by-layer synthesis.

cond-mat.mtrl-sci↗

arXiv2024

Developments and applications of the OPTIMADE API for materials discovery, design, and data exchange

The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 release, and has underpinned multiple scientific studies. In this work, we highlight the latest features of the API format, accompanying software tools, and provide an update on the implementation of OPTIMADE in contributing materials databases. We end by providing several use cases that demonstrate the utility of the OPTIMADE API in materials research that continue to drive its ongoing development.

cond-mat.mtrl-sci↗

arXiv2024

Searching Materials Space for Hydride Superconductors at Ambient Pressure

We employed a machine-learning assisted approach to search for superconducting hydrides under ambient pressure within an extensive dataset comprising over 150 000 compounds. Our investigation yielded around 50 systems with transition temperatures surpassing 20 K, and some even reaching above 70 K. These compounds have very different crystal structures, with different dimensionality, chemical composition, stoichiometry, and arrangement of the hydrogens. Interestingly, most of these systems displayed slight thermodynamic instability, implying that their synthesis would require conditions beyond ambient equilibrium. Moreover, we found a consistent chemical composition in the majority of these systems, which combines alkali or alkali-earth elements with noble metals. This observation suggests a promising avenue for future experimental investigations into high-temperature superconductivity within hydrides at ambient pressure.

cond-mat.supr-con↗

arXiv2023

Two-Dimensional Noble Metal Chalcogenides in the Frustrated Snub-Square Lattice

We study two-dimensional noble metal chalcogenides, with composition {Cu, Ag, Au}2{S, Se, Te}, crystallizing in a snub-square lattice. This is a semi-regular two-dimensional tesselation formed by triangles and squares that exhibits geometrical frustration. We use for comparison a square lattice, from which the snub-square tiling can be derived by a simple rotation of the squares. The mono-layer snub-square chalcogenides are very close to thermodynamic stability, with the most stable system (Ag2Se) a mere 7 meV/atom above the convex hull of stability. All compounds studied in the square and snub-square lattice are semiconductors, with band gaps ranging from 0.1 to more than 2.5 eV. Excitonic effects are strong, with an exciton binding energy of around 0.3 eV. We propose the Cu (001) surface as a possible substrate to synthesize Cu2Se, although many other metal and semiconducting surfaces can be found with very good lattice matching.

cond-mat.mtrl-sci↗

arXiv2023

Prediction of Ambient Pressure Conventional Superconductivity above 80K in Thermodynamically Stable Hydride Compounds

The primary challenge in the field of high-temperature superconductivity in hydrides is to achieve a superconducting state at ambient pressure rather than the extreme pressures that have been required in experiments so far. Here, we propose a family of compounds, of composition Mg$_2$XH$_6$ with X$=$Rh, Ir, Pd, or Pt, that achieves this goal. These materials were identified by scrutinizing more than a million compounds using a machine-learning accelerated high-throughput workflow. They are thermodynamically stable, indicating that they are serious candidates for experimental synthesis. We predict that their superconducting transition temperatures are in the range of 45-80K, or even above 100K with appropriate electron doping of the Pt compound. These results indicate that, although very rare, high-temperature superconductivity in thermodynamically stable hydrides is achievable at room pressure.

cond-mat.supr-con↗

arXiv2023

Reproducibility of density functional approximations: how new functionals should be reported

Density functional theory is the workhorse of chemistry and materials science, and novel density functional approximations (DFAs) are published every year. To become available in program packages, the novel DFAs need to be (re)implemented. However, according to our experience as developers of Libxc [Lehtola et al, SoftwareX 7, 1 (2018)], a constant problem in this task is verification, due to the lack of reliable reference data. As we discuss in this work, this lack has lead to several non-equivalent implementations of functionals such as BP86, PW91, PBE, and B3LYP across various program packages, yielding different total energies. Through careful verification, we have also found many issues with incorrect functional forms in recent DFAs. The goal of this work is to ensure the reproducibility of DFAs: DFAs must be verifiable in order to prevent reappearances of the abovementioned errors and incompatibilities. A common framework for verification and testing is therefore needed. We suggest several ways in which reference energies can be produced with free and open source software, either with non-self-consistent calculations with tabulated atomic densities or via self-consistent calculations with various program packages. The employed numerical parameters -- especially, the quadrature grid -- need to be converged to guarantee a $\lesssim0.1μE_{h}$ precision in the total energy, which is nowadays routinely achievable in fully numerical calculations. Moreover, as such sub-$μE_{h}$ level agreement can only be achieved when fully equivalent implementations of the DFA are used, also the source code of the reference implementation should be made available in any publication describing a new DFA.

physics.comp-ph↗

arXiv2023

Sampling the Whole Materials Space for Conventional Superconducting Materials

We perform a large scale study of conventional superconducting materials using a machine-learning accelerated high-throughput workflow. We start by creating a comprehensive dataset of around 7000 electron-phonon calculations performed with reasonable convergence parameters. This dataset is then used to train a robust machine learning model capable of predicting the electron-phonon and superconducting properties based on structural, compositional, and electronic ground-state properties. Using this machine, we evaluate the transition temperature (Tc ) of approximately 200000 metallic compounds, all of which on the convex hull of thermodynamic stability (or close to it) to maximize the probability of synthesizability. Compounds predicted to have Tc values exceeding 5 K are further validated using density-functional perturbation theory. As a result, we identify 545 compounds with Tc values surpassing 10 K, encompassing a variety of crystal structures and chemical compositions. This work is complemented with a detailed examination of several interesting materials, including nitrides, hydrides, and intermetallic compounds. Particularly noteworthy is LiMoN2 , which we predict to be superconducting in the stoichiometric trigonal phase, with a Tc exceeding 38 K. LiMoN2 has been previously synthesized in this phase, further heightening its potential for practical applications.

cond-mat.supr-con↗

arXiv2023

Searching for ductile superconducting Heusler X2YZ compounds

Heusler compounds have always attracted a great deal of attention from researchers thanks to a wealth of interesting properties for technological applications. They are intermetallic ductile compounds, and some of them have been found to be superconducting. With this in mind, we perform an extensive study of the superconducting and elastic properties of the cubic (full-)Heusler family. Starting from thermodynamically stable compounds, we use ab initio methods for the calculation of the phonon spectra, electron-phonon couplings, superconducting critical temperatures and elastic tensors. By analyzing the statistical distributions of these properties and comparing them to anti-perovskites we recognize universal behaviors that should be common to all conventional superconductors while others turn out to be specific to the material family. The resulting data is used to train interpretable and predictive machine learning models, that are used to extend our knowledge of superconductivity in Heuslers and to provide an interpretation of our results. In total, we discover a total of 8 hypothetical materials with critical temperatures above 10 K, to be compared with the current record of Tc = 4.7 K in this family. Furthermore, we expect most of these materials to be highly ductile, making them potential candidates for the manufacture of wires and tapes for superconducting magnets.

cond-mat.supr-con↗

arXiv2023

Structure prediction and characterization of CuI-based ternary $p$-type transparent conductors

Zincblende copper iodide has attracted significant interest as a potential material for transparent electronics, thanks to its exceptional light transmission capabilities in the visible range and remarkable hole conductivity. However, remaining challenges hinder the utilization of copper iodide's unique properties in real-world applications. To address this, chalcogen doping has emerged as a viable approach to enhance the hole concentration in copper iodide. In search of further strategies to improve and tune the electronic properties of this transparent semiconductor, we investigate the ternary phase diagram of copper and iodine with sulphur or selenium by performing structure prediction calculations using the minima hopping method. As a result, we find 11 structures located on or near the convex hull, 9 of which are unreported. Based on our band structure calculations, it appears that sulphur and selenium are promising candidates for achieving ternary semiconductors suitable as $p$-type transparent conducting materials. Additionally, our study reveals the presence of unreported phases that exhibit intriguing topological properties. These findings broaden the scope of potential applications for these ternary systems, highlighting the possibility of harnessing their unique electronic characteristics in diverse electronic devices and systems.

cond-mat.mtrl-sci↗

arXiv2023

Symmetry-based computational search for novel binary and ternary 2D materials

We present a symmetry-based exhaustive approach to explore the structural and compositional richness of two-dimensional materials. We use a ``combinatorial engine'' that constructs potential compounds by occupying all possible Wyckoff positions for a certain space group with combinations of chemical elements. These combinations are restricted by imposing charge neutrality and the Pauling test for electronegativities. The structures are then pre-optimized with a specially crafted universal neural-network force-field, before a final step of geometry optimization using density-functional theory is performed. In this way we unveil an unprecedented variety of two-dimensional materials, covering the whole periodic table in more than 30 different stoichiometries of form A$_n$B$_m$ or A$_n$B$_m$C$_k$. Among the found structures we find examples that can be built by decorating nearly all Platonic and Archimedean tesselations as well as their dual Laves or Catalan tilings. We also obtain a rich, and unexpected, polymorphism for some specific compounds. We further accelerate the exploration of the chemical space of two-dimensional materials by employing machine-learning-accelerated prototype search, based on the structural types discovered in the exhaustive search. In total, we obtain around 6500 compounds, not present in previous available databases of 2D materials, with an energy of less than 250~meV/atom above the convex hull of thermodynamic stability.

cond-mat.mtrl-sci↗

arXiv2023

Transfer learning on large datasets for the accurate prediction of material properties

Graph neural networks trained on large crystal structure databases are extremely effective in replacing ab initio calculations in the discovery and characterization of materials. However, crystal structure datasets comprising millions of materials exist only for the Perdew-Burke-Ernzerhof (PBE) functional. In this work, we investigate the effectiveness of transfer learning to extend these models to other density functionals. We show that pre-training significantly reduces the size of the dataset required to achieve chemical accuracy and beyond. We also analyze in detail the relationship between the transfer-learning performance and the size of the datasets used for the initial training of the model and transfer learning. We confirm a linear dependence of the error on the size of the datasets on a log-log scale, with a similar slope for both training and the pre-training datasets. This shows that further increasing the size of the pre-training dataset, i.e. performing additional calculations with a low-cost functional, is also effective, through transfer learning, in improving machine-learning predictions with the quality of a more accurate, and possibly computationally more involved functional. Lastly, we compare the efficacy of interproperty and intraproperty transfer learning.

cond-mat.mtrl-sci↗

arXiv2023

Homogeneous Electron Liquid in Arbitrary Dimensions: Exchange and Correlation Using the Singwi-Tosi-Land-Sjölander Approach

The ground states of the homogeneous electron gas and the homogeneous electron liquid are cornerstones in quantum physics and chemistry. They are archetypal systems in the regime of slowly varying densities in which the exchange-correlation energy can be estimated with a myriad of methods. For high densities, the behavior of the energy is well-known for 1, 2, and 3 dimensions. Here, we extend this model to arbitrary integer dimensions, and compute its correlation energy beyond the random phase approximation (RPA), using the celebrated approach developed by Singwi, Tosi, Land, and Sjölander (STLS), which is known to be remarkably accurate in the description of the full electronic density response for $2D$ and $3D$, both in the paramagnetic and ferromagnetic ground states. For higher dimensions, we compare the results obtained for the correlation energy using the STLS method with the values previously obtained using RPA. We found that at high dimensions STLS tends to be more physical in the sense that the infamous sum rules are better satisfied by the theory. We furthermore illustrate the importance of the plasmon contribution to STLS theory.

cond-mat.str-el↗