arXiv subjects

Miguel Alfonso Mendez

Publications and source records attributed to Miguel Alfonso Mendez.

26 records · Page 2Linked to original sources

arXiv2023

Real-time data assimilation for the thermodynamic modeling of cryogenic storage tanks

The thermal management of cryogenic storage tanks requires advanced control strategies to minimize the boil-off losses produced by heat leakages and sloshing-enhanced heat and mass transfer. This work presents a data-assimilation approach to calibrate a 0D thermodynamic model for cryogenic fuel tanks from data collected in real time from multiple tanks. The model combines energy and mass balance between three control volumes (the ullage vapor, the liquid, and the solid tank) with an Artificial Neural Network (ANN) for predicting the heat transfer coefficients from the current tank state. The proposed approach combines ideas from traditional data assimilation and multi-environment reinforcement learning, where an agent's training (model assimilation) is carried out simultaneously on multiple environments (systems). The real-time assimilation uses a mini-batch version of the Limited-memory Broyden-Fletcher-Goldfarb-Shanno with bounds (L-BFGS-B) and adjoint-based gradient computation for solving the underlying optimization problem. The approach is tested on synthetic datasets simulating multiple tanks undergoing different operation phases (pressurization, hold, long-term storage, and sloshing). The results show that the assimilation is robust against measurement noise and uses it to explore the parameter space further. Moreover, we show that sampling from multiple environments simultaneously accelerates the assimilation.

physics.flu-dyn↗

arXiv2023

Dynamic wetting experiment with nitrogen in a quasi-capillary tube

This work investigates the wetting dynamics of cryogenic fluids in inertia-dominated conditions. We experimentally characterized an oscillating gas-liquid interface of liquid nitrogen in a partially filled U-shaped quartz tube. The experiments were carried out in controlled cryogenic conditions, with interface oscillations produced by releasing the liquid column from an unbalanced position and having nitrogen vapor as the only ullage gas. During the experiments, the interface shape was tracked via image processing and used to fit a model from which the contact angle could be accurately determined. The results show that the dynamic contact angle evolution in advancing conditions is linearly linked to the Capillary number, with a slope depending on whether the interface moves over a dry or a pre-wet surface. However, the contact angle remains close to the one at equilibrium in receding conditions. To analyze the relation between contact angle and interface dynamics, we define an equivalent contact angle as the one that would make a spherical interface produce the same capillary pressure drop as the actual interface shape. The evolution of this equivalent contact angle proved to be independent of the evolution of the actual one, suggesting that the interface shape is not influenced by it. Finally, a theoretical analysis of the interface motion using a simplified model shows that viscous forces dominate the damping of the interface for small tube sizes, while gravity and inertial forces dominate the oscillating dynamics of the liquid column for larger tubes.

physics.flu-dyn↗

arXiv2023

Data-driven modeling of hypersonic reentry flow with heat and mass transfer

The entry phase constitutes a design driver for aerospace systems that include such a critical step. This phase is characterized by hypersonic flows encompassing multiscale phenomena that require advanced modeling capabilities. However, since high fidelity simulations are often computationally prohibitive, simplified models are needed in multidisciplinary analyses requiring fast predictions. This work proposes data-driven surrogate models to predict the flow, and mixture properties along the stagnation streamline of hypersonic flows past spherical objects. Surrogate models are designed to predict velocity, pressure, temperature, density and air composition as a function of the object's radius, velocity, reentry altitude and surface temperature. These models are trained with data produced by numerical simulation of the quasi-one-dimensional Navier-Stokes formulation and a selected Earth atmospheric model. Physics-constrained parametric functions are constructed for each flow variable of interest, and artificial neural networks are used to map the model parameters to the model's inputs. Surrogate models were also developed to predict surface quantities of interest for the case of nonreacting or ablative carbon-based surfaces, providing alternatives to semiempirical correlations. A validation study is presented for all the developed models, and their predictive capabilities are showcased along selected reentry trajectories of space debris from low-Earth orbits.

physics.flu-dyn↗

arXiv2023

Damping of three-dimensional waves on coating films dragged by moving substrates

Paints and coatings often feature interfacial defects due to disturbances during the deposition process which, if they persist until solidification, worsen the product quality. In this article, we investigate the stability of a thin liquid film dragged by a vertical substrate moving against gravity, a flow configuration found in a variety of coating processes. The receptivity of the liquid film to three-dimensional disturbances is discussed with Direct Numerical Simulations (DNS), an in-house non-linear Integral Boundary Layer (IBL) film model, and Linear Stability Analysis (LSA). The thin film model, successfully validated with the DNS computations, implements a pseudo-spectral approach for the capillary terms that allows for investigating non-periodic surface tension dominated flows. The combination of these numerical tools allows for describing the mechanisms of capillary and non-linear damping, and identifying the instability threshold of the coating processes. The results show that transverse modulations can be beneficial for the damping of two-dimensional waves within the range of operational conditions considered in this study, typical of air-knife and slot-die coating.

physics.flu-dyn↗

arXiv2022

Experimental analysis of heat and mass transfer in non-isothermal sloshing using a model-based inverse method

Nonisothermal liquid sloshing in partially filled reservoirs can significantly enhance heat and mass transfer between liquid and ullage gasses. This can result in large temperature and pressure fluctuations, producing thrust oscillations in spacecraft and challenging thermal management control systems. This work presents an experimental characterization of the thermodynamic evolution of a cylindrical reservoir undergoing sloshing-induced thermal de-stratification. We use a 0D model-based inverse method to retrieve the heat and mass transfer coefficients in planar and swirl sloshing conditions from the temperature and pressure measurements in the liquid and the ullage gas. The experiments were carried out in the SHAKESPEARE shaking table of the von Karman Institute in a cuboid quartz cell with a cylindrical cut-out of 80 mm diameter in the centre, filled up to 60mm with the cryogenic replacement fluid HFE-7200. A thermal stratification with 25 K difference between the ullage gas and liquid was set as the initial conditions. A pressure drop of 90% in the ullage gas was documented in swirling conditions. Despite its simplicity, the model could predict the system's thermodynamic evolution once the proper transfer coefficients were derived.

physics.flu-dyn↗

arXiv2022

Effect of inertia on the dynamic contact angle in oscillating menisci

The contact angle between a gas-liquid interface and a solid surface is a function of the dynamic conditions of the contact line. Classic steady correlations link the contact angle to the contact line velocity. However, it is not clear whether they hold in presence of inertia and in the case of perfect wetting fluids. We analyze the shape of a liquid interface and the corresponding contact angle in accelerating conditions for two different fluids, i.e. HFE7200 (perfect wetting) and demineralized water. The set-up consists of a U-shaped quasi-capillary tube in which the liquid column oscillates in response to a pressure step on one of the two sides. We obtained the evolution of the interface shape from high-speed back-light visualization, and we fit interface models to the experimental data to estimate the contributions of all the governing forces and the contact angle. Traditional interface models fail to predict the interface shape and its contact angle at large interface and contact line accelerations. We propose a new model to account for the acceleration, and we discuss its impact on the measurement of the transient contact angle.

physics.flu-dyn↗

arXiv2022

Physics-constrained machine learning for thermal turbulence modelling at low Prandtl numbers

Liquid metals play a central role in new generation liquid metal cooled nuclear reactors, for which numerical investigations require the use of appropriate thermal turbulence models for low Prandtl number fluids. Given the limitations of traditional modelling approaches and the increasing availability of high-fidelity data for this class of fluids, we propose a Machine Learning strategy for the modelling of the turbulent heat flux. A comprehensive algebraic mathematical structure is derived and physical constraints are imposed to ensure attractive properties promoting applicability, robustness and stability. The closure coefficients of the model are predicted by an Artificial Neural Network (ANN) which is trained with DNS data at different Prandtl numbers. The validity of the approach was verified through a priori and a posteriori validation for two and three-dimensional liquid metal flows. The model provides a complete vectorial representation of the turbulent heat flux and the predictions fit the DNS data in a wide range of Prandtl numbers (Pr=0.01-0.71). The comparison with other existing thermal models shows that the methodology is very promising.

physics.flu-dyn↗

arXiv2022

Statistical Treatment, Fourier and Modal Decomposition

These are lecture notes for the lecture "Statistical Treatment, Fourier and Modal Decompositions", given at the VKI Lecture series "Fundamentals and Recent Advances in Particle Image Velocimetry and Lagrangian Particle Tracking". The course was held at the von Karman Institute for fluid dynamics from 15 November to 18 November 2021. This lecture provides a guided tour through the processing of data acquired via image velocimetry. Far from being an exhaustive account of the field, which would require an entire course on its own, the scope is to provide a hands-on tutorial. This begins with basic statistical treatment, briefly reviews frequency and modal analysis, and conclude with more advanced research topics such as multiscale modal decompositions and nonlinear dimensionality reduction. The material covered should hopefully propel newcomers into the subject while remaining of interest to experienced practitioners. All the codes related to this lecture are made available on a github repository.

physics.flu-dyn↗