arXiv subjects

Miguel Bordallo López

Publications and source records attributed to Miguel Bordallo López.

At least 19 recordsLinked to original sources

arXiv2026

Sensing-Aided Vehicular Beam Tracking: System Gain Over Link Feedback and Probe-Verified Sensing Invocation

Sensor-based beam prediction is usually evaluated against exhaustive beam training, leaving open when sensing adds useful information beyond a deployed tracker's link feedback and when it should be withheld. We separate system gain from the marginal value of sensing in action-restricted causal replay of recorded 64-beam sweeps from four vehicular DeepSense 6G scenarios. The replay exposes only serving-beam and explicitly probed candidate powers and counts probes and model invocations separately. The proposed controller combines a scheduled post-setup re-sweep with probe-verified sensing admission and blacklist backoff. In three scenarios where feedback-only tracking is within 0.25 dB of the recorded-sweep oracle, the controller stays close to feedback-only in mean loss while rarely invoking the model, whereas always-on sensing performs worse. In the sole high-innovation scenario, the controller's system gain is 0.82 dB (95% confidence interval [0.30, 1.40]) over the plain feedback-only tracker and 0.15 dB over a probe-limited re-sweeping reference, with fewer probes than either. Sensing and the re-sweep both correct setup lock loss. At the native decision interval, enabling sensing in the same controller yields no statistically resolved loss reduction but cuts probing by 21%. In this scenario, accurate sensing reduces loss relative to the sensor-disabled controller under emulated link noise, staleness or longer decision intervals. Weak or delayed sensing can instead increase loss despite probe verification. These exploratory results characterize sensing as a conditional substitute for RF probing or a source of loss reduction, depending on the limitations of link feedback and on the accuracy and timeliness of sensing.

eess.SP↗

arXiv2026

Radar-Only Long-Term Beam Prediction in mmWave Vehicular Networks: An Empirical Study of Doppler Input and Cross-Modal Distillation

Sensing-aided beam prediction could cut the beam-training overhead of millimeter-wave vehicular links, and two design choices could strengthen a radar-only predictor: a Doppler-resolved input and knowledge distilled from a camera during training. We measure what each is worth in received power rather than in top-1 accuracy, whose differences of a few points amount to only tenths of a decibel. We use real DeepSense 6G measurements, mainly at one roadside site, and one convolutional-recurrent predictor family evaluated open-loop up to 0.67 s ahead. Adding a range-Doppler map to the range-angle map lowers the mean beam-selection loss by 0.28 dB (95% bootstrap interval [0.14, 0.41]). The gain comes from the Doppler content, not from the extra input, and replicates, as pre-specified, at a second base station, although holding the last measured beam beats both predictors there. Cross-modal knowledge distillation from a motion-mask vision-radar teacher, by contrast, changes received power by -0.01 dB ([-0.07, +0.06]). The tested teacher, student, fusion and distillation variants show the same null in the metric each was scored on. Where distillation helps, in an exploratory run with few training passes, a radar-only teacher trained on all training passes reproduces most of the gain. For this predictor family and the full training set, the measurable gain at the link comes from Doppler-resolved radar content; no tested route for transferring training-only visual information adds a resolved gain.

eess.SP↗

arXiv2026

Learning Multimodal Sensor Fusion with JEPA Representations for Breathing Activity and Pose Recognition

Predictive video representations do not by themselves specify how a multimodal system should handle missing sensors. We transfer frozen V-JEPA2 features to a set of heterogeneous sensors comprised by RGB video, depth video, and radar time series. A shared fusion model uses modality queries, fixed sensor slots, and explicit availability to classify breathing activity and pose from all seven non-empty sensor subsets. The contribution is a controlled evaluation of subset supervision, pooling capacity, and representation transfer on 39 OMuSense-23 subjects with five subject-group folds and three seeds. With matched downstream parameter counts, the final model reaches recording-level activity macro-F1 of $75.23%\pm0.60$ averaged across seven subsets. Supervising all subsets in each batch improves the matched query-pooling control by 1.923 percentage points (conditional 95% subject-bootstrap interval [0.647, 3.209]), while query pooling shows no clear advantage over matched mean pooling under balanced supervision. Radar probes support transfer beyond pooled wavelet pixels, 64-token inference approximately preserves mean activity performance, and the tested Consensus-JEPA loss adds no measured benefit against its exact control.

cs.CV↗

arXiv2026

Oracle headroom without signal: null-calibrated evaluation of candidate selection for thermal heart rate estimation

Camera-based physiological monitoring can produce multiple estimates from several facial regions, extraction methods, and processing settings. Signal quality indices aim to select reliable estimates without a physiological reference, and their potential is often assessed with an oracle that selects the estimate closest to the reference in each window. This retrospective selection can reward chance agreement. We model the effect with order statistics. For K independent candidates unrelated to the reference, the expected oracle error decreases approximately as 1/K. We analyze thermal heart rate estimation on 96 iBVP recordings with 168 candidates per 10 s window. The oracle achieves a mean absolute error of 0.91 bpm, compared with 10.74 bpm for the best fixed configuration, 18.03 bpm for the best quality index, and 8.61 bpm for a constant predictor. With K = 24, a forehead signal from another recording matches the correct one, with 4.62 against 4.61 bpm. Oracle evaluations should report candidate count, valid coverage, and matched null controls.

cs.CV↗

arXiv2026

GA-EIRFS: A Geometry-Augmented Repeat-Factor Sampling Method for Long-Tailed LiDAR 3D Object Detection

Long-tailed 3D object detection is treated as a class-frequency problem, but LiDAR supervision quality depends on object observability: similar frequencies can hide different geometric evidence. We introduce Geometry-Augmented Exponentially Weighted Instance-Aware Repeat Factor Sampling (GA-EIRFS), a detector-agnostic method that modulates a frequency-based repeat factor with a fixed geometry score combining point count, surface-normal entropy, and surface coverage. GA-EIRFS changes only frame-sampling probabilities, leaving the detector and inference unchanged. On nuScenes it improves mean average precision (mAP) and the nuScenes detection score (NDS) in four converged experiments with CenterPoint and PointPillars over two seeds; for CenterPoint at seed 666, mAP rises from 0.552 to 0.563 and bicycle AP from 0.306 to 0.359. Per-class gains correlate with the class sampling-weight increase (Spearman rho=0.70, p=0.025) but not with geometry score alone (rho=0.32, p=0.37), so geometry amplifies frequency-driven need. KITTI results vary across seeds, most for the rarest class. Code: https://github.com/Multimodal-Sensing-Lab/GA-EIRFS.

cs.CV↗

arXiv2026

Agentic Service Markets Across the Computing Continuum: A Polymatroidal Architecture

Autonomous AI agents are becoming economic actors. They compose deadline-bound services across the device-edge-cloud continuum and contend for capacity no single operator owns. This article asks when decentralised pricing can coordinate them exactly and truthfully, and what their service dependencies must satisfy. We model the pipelines as service-dependency graphs under governance constraints and identify the decisive property: laminarity of the induced leaf-block family. Where it holds, the feasible allocation space is a polymatroid and efficient incentive-compatible clearing exists per epoch; where a crossing breaks it, exactness and truthfulness can fail, while clearing prices survive on every totally unimodular family. The formal results instantiate polymatroid, gross-substitutes and Vickrey-Clarke-Groves theory; the contribution is the bridge from dependency structure to that machinery and an integrator architecture that exposes a laminar interface. The node-level evaluation (32,020 runs), at testbed-calibrated congestion, locates the boundary. One crossing costs exactness in 14.7% of high-load rounds and none on laminar instances, and truthfulness fails where exactness does, across contention. An integrator's inner exposure restores exactness at a cost in admitted volume, and before translation overhead it cuts median latency by 16 to 17 percent. Against truth-free posted prices the tuned market leads at medium load and trails a demand-responsive one in four of six high-load cells. Recorded and composed agent workloads drive the allocation. For platform designers, laminar pipelines admit exact decentralised pricing, truthful under the VCG mechanism, and a crossing needs an integrator's inner exposure.

cs.AI↗

arXiv2026

Handwritten Digit Leakage from Smartphone Motion Sensors Across Unseen Users and Phone Models

Smartphone motion sensors support interactive applications, but their readings may also reveal touchscreen input beyond their intended use. Assuming known drawing intervals, we study whether handwritten digits remain predictable across users and devices, as a 10-class problem on 19,628 HuMIdb recordings from 481 participants. We compare handcrafted features with classical machine learning algorithms, MiniRocket kernels, and a compact sensor patch transformer on accelerometer, linear acceleration, gyroscope, and gravity signals. The transformer achieves 57.74\% accuracy and 82.64\% top-3 accuracy on 75 unseen participants, and 58.77$\pm$0.95\% over 3 seeds for unseen participants on 9 unseen phone models. Low motion recordings remain informative, accuracy is not monotonic in motion level, and the tested contrastive pretraining, augmentation, and derived signals give no consistent gains. Digits are thus predictable beyond familiar users and phone models under assumed segmentation, while acquisition-order shortcuts limit conclusions about practical privacy exposure. Code available at: https://github.com/Arritmic/motion-digit-leakage.

cs.LG↗

arXiv2026

Phenomenon-Graph JEPA: Label-Efficient Representation Learning for Contactless Cardiorespiratory Sensing

Millimeter-wave (mmWave) radar and RGB-D cameras can record cardiac and respiratory waveforms continuously and without contact, but labeled recordings remain scarce because every label requires a supervised acquisition session. Self-supervised pretraining can exploit the unlabeled signals, yet contrastive methods depend on signal transformations and negative pairs whose validity is uncertain for cardiorespiratory data, where time warping changes breathing rate and distant windows can share the same physiological state. We present Phenomenon-Graph JEPA, a joint-embedding predictive architecture that learns from four processed one-dimensional streams without negative pairs or synthetic augmentation in its base configuration. Each stream is encoded by a temporal convolutional branch and a band-limited spectral branch. During pretraining, the model predicts stopped target embeddings along typed edges, which connect streams assigned to the same physiological phenomenon, and forward in time within a state episode. We treat this physiological typing as a testable hypothesis and compare it with wrong-edge and all-pairs prediction graphs. In the OMuSense-23 dataset, pretraining improves label-efficiency area over matched supervised training by 3.91 percentage points (95% interval 2.08 to 5.80, Holm-adjusted p = 0.006), and by 3.74 points under a second configuration evaluated on the same test participants. However, the wrong-edge and all-pairs controls do not establish a benefit from physiological typing. Optional Takens-inspired delay coordinates improve a validation comparison with learned history, whereas two wrist-only WESAD protocols do not establish a pretraining advantage. The study therefore separates the measured benefit of predictive representations from the physiological prior used to organize their training.

cs.LG↗

arXiv2026

Thermal Imaging for Contactless Cardiorespiratory and Sudomotor Response Monitoring

Human-machine interfaces in industrial automation need sensing modules that monitor operator actions and physiological state. This is important in factories, vehicles, machinery cabins, and human-robot collaboration, where workload, stress, fatigue, or reduced attention can affect safety. RGB monitoring is limited by low light, shadows, and privacy concerns, while thermal infrared imaging captures skin temperature dynamics without visible illumination. This paper studies thermal video as a contactless computer vision modality for estimating electrodermal activity (EDA), heart rate (HR), and breathing rate (BR), with the goal of supporting adaptive human-machine interfaces and operator-state awareness. We propose a signal-processing pipeline that tracks facial regions, aggregates thermal signals, and separates slow sudomotor trends from faster cardiorespiratory components. HR is estimated using orthogonal matrix image transformation (OMIT) across multiple facial regions, while BR is estimated from nasal and cheek thermal signals using spectral peak detection. We characterize 288 ROI-method configurations against contact references with lag-tolerant metrics using 31 sessions from the public SIMULATOR STUDY 1 (SIM1) driver monitoring dataset. The best fixed EDA configuration reaches a mean absolute correlation of $0.40 \pm 0.23$ against palm EDA, with individual sessions reaching $0.89$. BR estimation achieves $3.1 \pm 1.1$ bpm mean absolute error, while HR estimation yields $13.8 \pm 7.5$ bpm MAE, limited by the $7.5$ Hz thermal camera frame rate. The results show that thermal video provides useful respiratory and sudomotor cues, while revealing limitations caused by ROI selection, polarity changes, latency, and subject variability. These findings provide baseline design guidance for thermal computer vision as an auxiliary sensing layer in adaptive industrial HMI systems.

cs.CV↗

arXiv2026

Differentiable Ray Tracing with Gaussians for Unified Radio Propagation Simulation and View Synthesis

Explicit neural representations such as 3D Gaussian Splatting (3DGS) enable high-fidelity and real-time novel view synthesis, yet optimize for alpha-composited optical appearance rather than ray-intersectable geometry. In contrast, radio-frequency (RF) digital twins require deterministic multi-bounce paths, where the geometry dictates trajectories and their associated attenuation and delay. We introduce a framework enabling differentiable RF propagation simulation directly within visually reconstructed neural scenes, allowing point-to-point path computation between arbitrary 3D locations while preserving high-quality visual rendering. Unlike conventional RF simulation pipelines that rely on manually constructed meshes, we embed Gaussian primitives into a hardware-accelerated ray tracing structure as the underlying spatial representation. By extracting physically meaningful channel impulse responses from visual-only reconstructions, we provide cross-modal evidence that neural reconstructions can serve as unified spatial representations for both electromagnetic propagation simulation and photorealistic view synthesis.

cs.CV↗

arXiv2025

From Theory to Throughput: CUDA-Optimized APML for Large-Batch 3D Learning

Loss functions are fundamental to learning accurate 3D point cloud models, yet common choices trade geometric fidelity for computational cost. Chamfer Distance is efficient but permits many-to-one correspondences, while Earth Mover Distance better reflects one-to-one transport at high computational cost. APML approximates transport with differentiable Sinkhorn iterations and an analytically derived temperature, but its dense formulation scales quadratically in memory. We present CUDA-APML, a sparse GPU implementation that thresholds negligible assignments and runs adaptive softmax, bidirectional symmetrization, and Sinkhorn normalization directly in COO form. This yields near-linear memory scaling and preserves gradients on the stored support, while pairwise distance evaluation remains quadratic in the current implementation. On ShapeNet and MM-Fi, CUDA-APML matches dense APML within a small tolerance while reducing peak GPU memory by 99.9%. Code available at: https://github.com/Multimodal-Sensing-Lab/apml

cs.LG↗

arXiv2025

Quality-Aware Framework for Video-Derived Respiratory Signals

Video-based respiratory rate (RR) estimation is often unreliable due to inconsistent signal quality across extraction methods. We present a predictive, quality-aware framework that integrates heterogeneous signal sources with dynamic assessment of reliability. Ten signals are extracted from facial remote photoplethysmography (rPPG), upper-body motion, and deep learning pipelines, and analyzed using four spectral estimators: Welch's method, Multiple Signal Classification (MUSIC), Fast Fourier Transform (FFT), and peak detection. Segment-level quality indices are then used to train machine learning models that predict accuracy or select the most reliable signal. This enables adaptive signal fusion and quality-based segment filtering. Experiments on three public datasets (OMuSense-23, COHFACE, MAHNOB-HCI) show that the proposed framework achieves lower RR estimation errors than individual methods in most cases, with performance gains depending on dataset characteristics. These findings highlight the potential of quality-driven predictive modeling to deliver scalable and generalizable video-based respiratory monitoring solutions.

cs.CV↗

arXiv2025

LiDAR-based Human Activity Recognition through Laplacian Spectral Analysis

Human Activity Recognition supports applications in healthcare, manufacturing, and human-machine interaction. LiDAR point clouds offer a privacy-preserving alternative to cameras and are robust to illumination. We propose a HAR method based on graph spectral analysis. Each LiDAR frame is mapped to a proximity graph (epsilon-graph) and the Laplacian spectrum is computed. Eigenvalues and statistics of eigenvectors form pose descriptors, and temporal statistics over sliding windows yield fixed vectors for classification with support vector machines and random forests. On the MM-Fi dataset with 40 subjects and 27 activities, under a strict subject-independent protocol, the method reaches 94.4% accuracy on a 13-class rehabilitation set and 90.3% on all 27 activities. It also surpasses the skeleton-based baselines reported for MM-Fi. The contribution is a compact and interpretable feature set derived directly from point cloud geometry that provides an accurate and efficient alternative to end-to-end deep learning.

cs.CV↗

arXiv2025

3DPCNet: Pose Canonicalization for Robust Viewpoint-Invariant 3D Kinematic Analysis from Monocular RGB cameras

Monocular 3D pose estimators produce camera-centered skeletons, creating view-dependent kinematic signals that complicate comparative analysis in applications such as health and sports science. We present 3DPCNet, a compact, estimator-agnostic module that operates directly on 3D joint coordinates to rectify any input pose into a consistent, body-centered canonical frame. Its hybrid encoder fuses local skeletal features from a graph convolutional network with global context from a transformer via a gated cross-attention mechanism. From this representation, the model predicts a continuous 6D rotation that is mapped to an $SO(3)$ matrix to align the pose. We train the model in a self-supervised manner on the MM-Fi dataset using synthetically rotated poses, guided by a composite loss ensuring both accurate rotation and pose reconstruction. On the MM-Fi benchmark, 3DPCNet reduces the mean rotation error from over 20$^{\circ}$ to 3.4$^{\circ}$ and the Mean Per Joint Position Error from ~64 mm to 47 mm compared to a geometric baseline. Qualitative evaluations on the TotalCapture dataset further demonstrate that our method produces acceleration signals from video that show strong visual correspondence to ground-truth IMU sensor data, confirming that our module removes viewpoint variability to enable physically plausible motion analysis.

cs.CV↗

arXiv2025

APML: Adaptive Probabilistic Matching Loss for Robust 3D Point Cloud Reconstruction

Training deep learning models for point cloud prediction tasks such as shape completion and generation depends critically on loss functions that measure discrepancies between predicted and ground-truth point sets. Commonly used functions such as Chamfer Distance (CD), HyperCD, and InfoCD rely on nearest-neighbor assignments, which often induce many-to-one correspondences, leading to point congestion in dense regions and poor coverage in sparse regions. These losses also involve non-differentiable operations due to index selection, which may affect gradient-based optimization. Earth Mover Distance (EMD) enforces one-to-one correspondences and captures structural similarity more effectively, but its cubic computational complexity limits its practical use. We propose the Adaptive Probabilistic Matching Loss (APML), a fully differentiable approximation of one-to-one matching that leverages Sinkhorn iterations on a temperature-scaled similarity matrix derived from pairwise distances. We analytically compute the temperature to guarantee a minimum assignment probability, eliminating manual tuning. APML achieves near-quadratic runtime, comparable to Chamfer-based losses, and avoids non-differentiable operations. When integrated into state-of-the-art architectures (PoinTr, PCN, FoldingNet) on ShapeNet benchmarks and on a spatiotemporal Transformer (CSI2PC) that generates 3D human point clouds from WiFi CSI measurements, APM loss yields faster convergence, superior spatial distribution, especially in low-density regions, and improved or on-par quantitative performance without additional hyperparameter search. The code is available at: https://github.com/apm-loss/apml.

cs.CV↗

arXiv2025

Design, Implementation and Evaluation of a Real-Time Remote Photoplethysmography (rPPG) Acquisition System for Non-Invasive Vital Sign Monitoring

The growing integration of smart environments and low-power computing devices, coupled with mass-market sensor technologies, is driving advancements in remote and non-contact physiological monitoring. However, deploying these systems in real-time on resource-constrained platforms introduces significant challenges related to scalability, interoperability, and performance. This paper presents a real-time remote photoplethysmography (rPPG) system optimized for low-power devices, designed to extract physiological signals, such as heart rate (HR), respiratory rate (RR), and oxygen saturation (SpO2), from facial video streams. The system is built on the Face2PPG pipeline, which processes video frames sequentially for rPPG signal extraction and analysis, while leveraging a multithreaded architecture to manage video capture, real-time processing, network communication, and graphical user interface (GUI) updates concurrently. This design ensures continuous, reliable operation at 30 frames per second (fps), with adaptive feedback through a collaborative user interface to guide optimal signal capture conditions. The network interface includes both an HTTP server for continuous video streaming and a RESTful API for on-demand vital sign retrieval. To ensure accurate performance despite the limitations of low-power devices, we use a hybrid programming model combining Functional Reactive Programming (FRP) and the Actor Model, allowing event-driven processing and efficient task parallelization. The system is evaluated under real-time constraints, demonstrating robustness while minimizing computational overhead. Our work addresses key challenges in real-time biosignal monitoring, offering practical solutions for optimizing performance in modern healthcare and human-computer interaction applications.

cs.CV↗

arXiv2025

Exponentially Weighted Instance-Aware Repeat Factor Sampling for Long-Tailed Object Detection Model Training in Unmanned Aerial Vehicles Surveillance Scenarios

Object detection models often struggle with class imbalance, where rare categories appear significantly less frequently than common ones. Existing sampling-based rebalancing strategies, such as Repeat Factor Sampling (RFS) and Instance-Aware Repeat Factor Sampling (IRFS), mitigate this issue by adjusting sample frequencies based on image and instance counts. However, these methods are based on linear adjustments, which limit their effectiveness in long-tailed distributions. This work introduces Exponentially Weighted Instance-Aware Repeat Factor Sampling (E-IRFS), an extension of IRFS that applies exponential scaling to better differentiate between rare and frequent classes. E-IRFS adjusts sampling probabilities using an exponential function applied to the geometric mean of image and instance frequencies, ensuring a more adaptive rebalancing strategy. We evaluate E-IRFS on a dataset derived from the Fireman-UAV-RGBT Dataset and four additional public datasets, using YOLOv11 object detection models to identify fire, smoke, people and lakes in emergency scenarios. The results show that E-IRFS improves detection performance by 22\% over the baseline and outperforms RFS and IRFS, particularly for rare categories. The analysis also highlights that E-IRFS has a stronger effect on lightweight models with limited capacity, as these models rely more on data sampling strategies to address class imbalance. The findings demonstrate that E-IRFS improves rare object detection in resource-constrained environments, making it a suitable solution for real-time applications such as UAV-based emergency monitoring. The code is available at: https://github.com/futurians/E-IRFS.

cs.CV↗

arXiv2025

Differentiable High-Performance Ray Tracing-Based Simulation of Radio Propagation with Point Clouds

Ray tracing is a widely used deterministic method for radio propagation simulations, capable of producing physically accurate multipath components. The accuracy depends on the quality of the environment model and its electromagnetic properties. Recent advances in computer vision and machine learning have made it possible to reconstruct detailed environment models augmented with semantic segmentation labels. In this letter, we propose a differentiable ray tracing-based radio propagation simulator that operates directly on point clouds. We showcase the efficiency of our method by simulating multi-bounce propagation paths with up to five interactions with specular reflections and diffuse scattering in two indoor scenarios, each completing in less than 90 ms. Lastly, we demonstrate how the differentiability of electromagnetic computations can be combined with segmentation labels to learn the electromagnetic properties of the environment.

eess.SP↗