arXiv subjects

Mihai Bondarescu

Publications and source records attributed to Mihai Bondarescu.

14 recordsLinked to original sources

arXiv2015

The Potential of Continuous, Local Atomic Clock Measurements for Earthquake Prediction and Volcanology

Modern optical atomic clocks along with the optical fiber technology currently being developed can measure the geoid, which is the equipotential surface that extends the mean sea level on continents, to a precision that competes with existing technology. In this proceeding, we point out that atomic clocks have the potential to not only map the sea level surface on continents, but also look at variations of the geoid as a function of time with unprecedented timing resolution. The local time series of the geoid has a plethora of applications. These include potential improvement in the predictions of earthquakes and volcanoes, and closer monitoring of ground uplift in areas where hydraulic fracturing is performed.

physics.geo-ph↗

arXiv2015

Atomic clocks as a tool to monitor vertical surface motion

Atomic clock technology is advancing rapidly, now reaching stabilities of $Δf/f \sim 10^{-18}$, which corresponds to resolving $1$ cm in equivalent geoid height over an integration timescale of about 7 hours. At this level of performance, ground-based atomic clock networks emerge as a tool for monitoring a variety of geophysical processes by directly measuring changes in the gravitational potential. Vertical changes of the clock's position due to magmatic, volcanic, post-seismic or tidal deformations can result in measurable variations in the clock tick rate. As an example, we discuss the geopotential change arising due to an inflating point source (Mogi model), and apply it to the Etna volcano. Its effect on an observer on the Earth's surface can be divided into two different terms: one purely due to uplift and one due to the redistribution of matter. Thus, with the centimetre-level precision of current clocks it is already possible to monitor volcanoes. The matter redistribution term is estimated to be 2-3 orders of magnitude smaller than the uplift term, and should be resolvable when clocks improve their stability to the sub-millimetre level. Additionally, clocks can be compared over distances of thousands of kilometres on a short-term basis (e.g. hourly). These clock networks will improve our ability to monitor periodic effects with long-wavelength like the solid Earth tide.

physics.geo-ph↗

arXiv2013

The Physics of the Far Future

We observe the past and present of the universe, but can we predict the far future? Observations suggest that in thousands of billions of years from now most matter and radiation will be absorbed by the cosmological horizon. As it absorbs the contents of the universe, the cosmological horizon is pushed further and further away. In time, the universe asymptotes towards an equilibrium state of the gravitational field. Flat Minkowski space is the limit of this process. It is indistinguishable from a space with an extremely small cosmological constant (Λ-> 0) and thus has divergent entropy.

gr-qc↗

arXiv2013

Merging Gravitation with Thermodynamics to Understand Cosmology

We discuss the evolution of the universe in the context of the second law of thermodynamics from its early stages to the far future. Cosmological observations suggest that most matter and radiation will be absorbed by the cosmological horizon. On the local scale, the matter that is not ejected from our supercluster will collapse to a supermassive black hole and then slowly evaporate. The history of the universe is that of an approach to the equilibrium state of the gravitational field.

gr-qc↗

arXiv2012

Geophysical applicability of atomic clocks: direct continental geoid mapping

The geoid is the true physical figure of the Earth, a particular equipotential surface of the gravity field of the Earth that accounts for the effect of all subsurface density variations. Its shape approximates best (in the sense of least squares) the mean level of oceans, but the geoid is more difficult to determine over continents. Satellite missions carry out distance measurements and derive the gravity field to provide geoid maps over the entire globe. However, they require calibration and extensive computations including integration, which is a non-unique operation. Here we propose a direct method and a new tool that directly measures geopotential differences on continents using atomic clocks. General Relativity Theory predicts constant clock rate at sea level, and faster (resp. slower) clock rate above (resp. below) sea level. The technology of atomic clocks is on the doorstep of reaching an accuracy level in clock rate that is equivalent to 1 cm in determining equipotential surface (including geoid) height. We discuss the value and future applicability of such measurements including direct geoid mapping on continents, and joint gravity and geopotential surveying to invert for subsurface density anomalies. Our synthetic calculations show that the geoid perturbation caused by a 1.5 km radius sphere with 20% density anomaly buried at 2 km depth in the crust of the Earth is already detectable by atomic clocks of achievable accuracy. Therefore atomic clock geopotential surveys, used together with relative gravity data to benefit from their different depth sensitivities, can become a useful tool in mapping density anomalies within the Earth.

physics.geo-ph↗

arXiv2012

Depressing de Sitter in the Frozen Future

In this paper we focus on the gravitational thermodynamics of the far future. Cosmological observations suggest that most matter will be diluted away by the cosmological expansion, with the rest collapsing into supermassive black holes. The likely future state of our local universe is a supermassive black hole slowly evaporating in an empty universe dominated by a positive cosmological constant. We describe some overlooked features of how the cosmological horizon responds to the black hole evaporation. The presence of a black hole depresses the entropy of the cosmological horizon by an amount proportional to the geometric mean of the entropies of the black hole and cosmological horizons. As the black hole evaporates and loses its mass in the process, the total entropy increases obeying the second law of thermodynamics. The entropy is produced by the heat from the black hole flowing across the extremely cold cosmological horizon. Once the evaporation is complete, the universe becomes empty de Sitter space that (in the presence of a true cosmological constant) is the maximum entropy thermodynamic equilibrium state. We propose that flat Minkowski space is an improper limit of this process which obscures the thermodynamics. The cosmological constant should be regarded not only as an energy scale, but also as a scale for the maximum entropy of a universe. In this context, flat Minkowski space is indistinguishable from de Sitter with extremely small cosmological constant, yielding a divergent entropy. This introduces an unregulated infinity in black hole thermodynamics calculations, giving possibly misleading results.

gr-qc↗

arXiv2010

Lukewarm dark matter: Bose condensation of ultralight particles

We discuss the thermal evolution and Bose-Einstein condensation of ultra-light dark matter particles at finite, realistic cosmological temperatures. We find that if these particles decouple from regular matter before Standard model particles annihilate, their temperature will be about 0.9 K. This temperature is substantially lower than the temperature of CMB neutrinos and thus Big Bang Nucleosynthesis remains unaffected. In addition the temperature is consistent with WMAP 7-year+BAO+H0 observations without fine-tuning. We focus on particles of mass of $m\sim 10^{-23}$ eV, which have Compton wavelengths of galactic scales. Agglomerations of these particles can form stable halos and naturally prohibit small scale structure. They avoid over-abundance of dwarf galaxies and may be favored by observations of dark matter distributions. We present numerical as well as approximate analytical solutions of the Friedmann-Klein-Gordon equations and study the cosmological evolution of this scalar field dark matter from the early universe to the era of matter domination. Today, the particles in the ground state mimic presureless matter, while the excited state particles are radiation like.

astro-ph.CO↗

arXiv2008

Optimal Light Beams and Mirror Shapes for Future LIGO Interferometers

We report the results of a recent search for the lowest value of thermal noise that can be achieved in LIGO by changing the shape of mirrors, while fixing the mirror radius and maintaining a low diffractional loss. The result of this minimization is a beam with thermal noise a factor of 2.32 (in power) lower than previously considered Mesa Beams and a factor of 5.45 (in power) lower than the Gaussian beams employed in the current baseline design. Mirrors that confine these beams have been found to be roughly conical in shape, with an average slope approximately equal to the mirror radius divided by arm length, and with mild corrections varying at the Fresnel scale. Such a mirror system, if built, would impact the sensitivity of LIGO, increasing the event rate of observing gravitational waves in the frequency range of maximum sensitivity roughly by a factor of three compared to an Advanced LIGO using Mesa beams (assuming all other noises remain unchanged). We discuss the resulting beam and mirror properties and study requirements on mirror tilt, displacement and figure error, in order for this beam to be used in LIGO detectors.

gr-qc↗

arXiv2008

Numerical Simulations of Oscillating Soliton Stars: Excited States in Spherical Symmetry and Ground State Evolutions in 3D

Excited state soliton stars are studied numerically for the first time. The stability of spherically symmetric S-branch excited state oscillatons under radial perturbations is investigated using a 1D code. We find that these stars are inherently unstable either migrating to the ground state or collapsing to black holes. Higher excited state configurations are observed to cascade through intermediate excited states during their migration to the ground state. This is similar to excited state boson stars. Ground state oscillatons are then studied in full 3D numerical relativity. Finding the appropriate gauge condition for the dynamic oscillatons is much more challenging than in the case of boson stars. Different slicing conditions are explored, and a customized gauge condition that approximates polar slicing in spherical symmetry is implemented. Comparisons with 1D results and convergence tests are performed. The behavior of these stars under small axisymmetric perturbations is studied and gravitational waveforms are extracted. We find that the gravitational waves damp out on a short timescale, enabling us to obtain the complete waveform. This work is a starting point for the evolution of real scalar field systems with arbitrary symmetries.

gr-qc↗

arXiv2007

Finite Mirror Effects in Advanced Interferometric Gravitational Wave Detectors

Thermal noise is expected to be the dominant source of noise in the most sensitive frequency band of second generation ground based gravitational wave detectors. Reshaping the beam to a flatter wider profile which probes more of the mirror surface reduces this noise. The "Mesa" beam shape has been proposed for this purpose and was subsequently generalized to a family of hyperboloidal beams with two parameters: twist angle alpha and beam width D. Varying alpha allows a continuous transition from the nearly-flat to the nearly-concentric Mesa beam configurations. We analytically prove that in the limit of infinite D hyperboloidal beams become Gaussians. The Advanced LIGO diffraction loss design constraint is 1 ppm per bounce. In the past the diffraction loss has often been calculated using the clipping approximation that, in general, underestimates the diffraction loss. We develop a code using pseudo-spectral methods to compute the diffraction loss directly from the propagator. We find that the diffraction loss is not a strictly monotonic function of beam width, but has local minima that occur due to finite mirror effects and leads to natural choices of D. For the Mesa beam a local minimum occurs at D = 10.67 cm and leads to a diffraction loss of 1.4 ppm. We find that if one requires a diffraction loss of strictly 1 ppm, the alpha = 0.91 pi hyperboloidal beam is optimal, leading to the coating thermal noise being lower by about 10% than for a Mesa beam while other types of thermal noise decrease as well. We then develop an iterative process that reconstructs the mirror to specifically account for finite mirror effects. This allows us to increase the D parameter and lower the coating noise by about 30% compared to the original Mesa configuration.

gr-qc↗

arXiv2006

Isometric embeddings of black hole horizons in three-dimensional flat space

The geometry of a two-dimensional surface in a curved space can be most easily visualized by using an isometric embedding in flat three-dimensional space. Here we present a new method for embedding surfaces with spherical topology in flat space when such a embedding exists. Our method is based on expanding the surface in spherical harmonics and minimizing for the differences between the metric on the original surface and the metric on the trial surface in the space of the expansion coefficients. We have applied this method to study the geometry of back hole horizons in the presence of strong, non-axisymmetric, gravitational waves (Brill waves). We have noticed that, in many cases, although the metric of the horizon seems to have large deviations from axisymmetry, the intrinsic geometry of the horizon is almost axisymmetric. The origin of the large apparent non-axisymmetry of the metric is the deformation of the coordinate system in which the metric was computed.

gr-qc↗

arXiv2006

Orbifolds in Numerical Relativity

Numerical Relativity has been using orbifolds for a long time, although they appear under different names in the literature. We review orbifolds previously used in simulations also discuss some that have not been used yet but are likely to be useful in the future.

gr-qc↗

arXiv2006

Simple solutions to the Einstein Equations in spaces with unusual topology

We discuss simple vacuum solutions to the Einstein Equations in five dimensional space-times compactified in two different ways. In such spaces, one black hole phase and more then one black string phase may exist. Several old metrics are adapted to new background topologies to yield new solutions to the Einstein Equations. We then briefly talk about the angular momentum they may carry, the horizon topology and phase transitions that may occur.

hep-th↗

arXiv2004

A New Family of Light Beams and Mirror Shapes for Future LIGO Interferometers

Advanced LIGO's present baseline design uses arm cavities with Gaussian light beams supported by spherical mirrors. Because Gaussian beams have large intensity gradients in regions of high intensity, they average poorly over fluctuating bumps and valleys on the mirror surfaces, caused by random thermal fluctuations (thermoelastic noise). Flat-topped light beams (mesa beams) are being considered as an alternative because they average over the thermoelastic fluctuations much more effectively. However, the proposed mesa beams are supported by nearly flat mirrors, which experience a very serious tilt instability. In this paper we propose an alternative configuration in which mesa-shaped beams are supported by nearly concentric spheres, which experience only a weak tilt instability. The tilt instability is analyzed for these mirrors in a companion paper by Savov and Vyatchanin. We also propose a one-parameter family of light beams and mirrors in which, as the parameter alpha varies continuously from 0 to pi, the beams and supporting mirrors get deformed continuously from the nearly flat-mirrored mesa configuration ("FM") at alpha=0, to the nearly concentric-mirrored mesa configuration ("CM") at alpha=pi. The FM and CM configurations at the endpoints are close to optically unstable, and as alpha moves away from 0 or pi, the optical stability improves.

gr-qc↗