SearcharxivSearch

arXiv subjects

Miho Yamada

Publications and source records attributed to Miho Yamada.

2 recordsLinked to original sources

Precision beam telescope based on SOI pixel sensor technology for electrons in the energy range of sub-GeV to GeV

We developed a beam telescope system comprising five layers of 300-$μ$m-thick INTPIX4NA monolithic pixel sensors with each pixel size of 17 $μ$m square. The sensors were fabricated using silicon-on-insulator (SOI) technology. The signal-to-noise ratio of 140--230 is realized at a bias voltage of 20~V. The tracker system was tested using a positron beam of 200--822 MeV/c, and various tracking methods are examined to optimize spatial precision achievable at these energies. The best tracking precision including the precision of the sensor under test itself is 11.04 $\pm$ 0.10 $μ$m for 822-MeV/c positrons for an equidistant sensor spacing of 32 mm. The achieved precision results combined with the intrinsic spatial resolution value obtained for a similar system using 120 GeV protons are used to estimate the tracking performance of electrons in the GeV energy range; a tracking precision of 2.22 $μ$m is evaluated for 5-GeV electrons. The method to estimate the tracking performance is verified using a Geant4-based simulation. The developed high precision tracker system enables to map the detailed performance of the sensors with pixel sizes of $\mathcal{O}$(10 $μ$m), therefore will be a powerful system for development of devices targeting precision position resolutions.

physics.ins-det

Compensation of radiation damages for SOI pixel detector via tunneling

We are developing monolithic pixel detectors based on SOI technology for high energy physics, X-ray applications and so on.To employ SOI pixel detector on such radiation environments, we have to solve effects of total ionizing dose (TID) for transistors which are enclosed in oxide layer.The holes which are generated and trapped in the oxide layers after irradiation affect characteristics of near-by transistors due to its positive electric field.Annealing and radiation of ultraviolet are not realistic to remove trapped holes for a fabricated detector due to thermal resistance of components and difficulty of handling. We studied compensation of TID effects by tunneling using a high-voltage. For decrease of trapped holes, applied high-voltage to buried p-well which is under oxide layer to inject the electrons into the oxide layer.In this report, recent progress of this study is shown.

physics.ins-det