arXiv subjects

Mika Juvela

Publications and source records attributed to Mika Juvela.

At least 109 records · Page 6Linked to original sources

arXiv2016

Astrochemical Properties of Planck Cold Clumps

We observed thirteen Planck cold clumps with the James Clerk Maxwell Telescope/SCUBA-2 and with the Nobeyama 45 m radio telescope. The N$_2$H$^+$ distribution obtained with the Nobeyama telescope is quite similar to SCUBA-2 dust distribution. The 82 GHz HC$_3$N, 82 GHz CCS, and 94 GHz CCS emission are often distributed differently with respect to the N$_2$H$^+$ emission. The CCS emission, which is known to be abundant in starless molecular cloud cores, is often very clumpy in the observed targets. We made deep single-pointing observations in DNC, HN$^{13}$C, N$_2$D$^+$, cyclic-C$_3$H$_2$ toward nine clumps. The detection rate of N$_2$D$^+$ is 50\%. Furthermore, we observed the NH$_3$ emission toward 15 Planck cold clumps to estimate the kinetic temperature, and confirmed that most of targets are cold ($\lesssim$ 20 K). In two of the starless clumps observe, the CCS emission is distributed as it surrounds the N$_2$H$^+$ core (chemically evolved gas), which resembles the case of L1544, a prestellar core showing collapse. In addition, we detected both DNC and N$_2$D$^+$. These two clumps are most likely on the verge of star formation. We introduce the Chemical Evolution Factor (CEF) for starless cores to describe the chemical evolutionary stage, and analyze the observed Planck cold clumps.

astro-ph.GA↗

arXiv2016

Star formation laws in both Galactic massive clumps and external galaxies: An extensive study with dust continuum, HCN (4-3), and CS (7-6)

We observed 146 Galactic clumps in HCN (4-3) and CS (7-6) with the Atacama Submillimeter Telescope Experiment (ASTE) 10-m telescope. A tight linear relationship between star formation rate and gas mass traced by dust continuum emission was found for both Galactic clumps and the high redshift (z>1) star forming galaxies (SFGs), indicating a constant gas depletion time of ~100 Myr for molecular gas in both Galactic clumps and high z SFGs. However, low z galaxies do not follow this relation and seem to have a longer global gas depletion time. The correlations between total infrared luminosities (L_TIR) and molecular line luminosities (L'_mol) of HCN (4-3) and CS (7-6) are tight and sublinear extending down to clumps with LTIR~10^{3} L_sun. These correlations become linear when extended to external galaxies. A bimodal behavior in the LTIR--L'mol correlations was found for clumps with different dust temperature, luminosity-to-mass ratio, and sigmaline/sigmavir. Such bimodal behavior may be due to evolutionary effects. The slopes of LTIR--L'mol correlations become more shallow as clumps evolve. We compared our results with lower J transition lines in wu et al. (2010). The correlations between clump masses and line luminosities are close to linear for low effective excitation density tracers but become sublinear for high effective excitation density tracers for clumps with LTIR larger than LTIR~10^4.5 Lsun. High effective excitation density tracers cannot linearly trace the total clump masses, leading to a sublinear correlations for both Mclump-L'mol and LTIR-L'mol relations.

astro-ph.GA↗

arXiv2016

Supernova Driving. III. Synthetic Molecular Cloud Observations

We present a comparison of molecular clouds (MCs) from a simulation of supernova-driven interstellar medium (ISM) turbulence with real MCs from the Outer Galaxy Survey. The radiative transfer calculations to compute synthetic CO spectra are carried out assuming the CO relative abundance depends only on gas density, according to four different models. Synthetic MCs are selected above a threshold brightness temperature value, $T_{\rm B,min}=1.4$ K, of the $J=1-0$ $^{12}$CO line, generating 16 synthetic catalogs (four different spatial resolutions and four CO abundance models), each containing up to several thousands MCs. The comparison with the observations focuses on the mass and size distributions and on the velocity-size and mass-size Larson relations. The mass and size distributions are found to be consistent with the observations, with no significant variations with spatial resolution or chemical model, except in the case of the unrealistic model with constant CO abundance. The velocity-size relation is slightly too steep for some of the models, while the mass-size relation is a bit too shallow for all models only at a spatial resolution $dx\approx 1$ pc. The normalizations of the Larson relations show a clear dependence on spatial resolution, for both the synthetic and the real MCs. The comparison of the velocity-size normalization suggests that the SN rate in the Perseus arm is approximately 70\% or less of the rate adopted in the simulation. Overall, the realistic properties of the synthetic clouds confirm that supernova-driven turbulence can explain the origin and dynamics of MCs.

astro-ph.GA↗

arXiv2016

Composite biasing in Monte Carlo radiative transfer

Biasing or importance sampling is a powerful technique in Monte Carlo radiative transfer, and can be applied in different forms to increase the accuracy and efficiency of simulations. One of the drawbacks of the use of biasing is the potential introduction of large weight factors. We discuss a general strategy, composite biasing, to suppress the appearance of large weight factors. We use this composite biasing approach for two different problems faced by current state-of-the-art Monte Carlo radiative transfer codes: the generation of photon packages from multiple components, and the penetration of radiation through high optical depth barriers. In both cases, the implementation of the relevant algorithms is trivial and does not interfere with any other optimisation techniques. Through simple test models, we demonstrate the general applicability, accuracy and efficiency of the composite biasing approach. In particular, for the penetration of high optical depths, the gain in efficiency is spectacular for the specific problems that we consider: in simulations with composite path length stretching, high accuracy results are obtained even for simulations with modest numbers of photon packages, while simulations without biasing cannot reach convergence, even with a huge number of photon packages.

astro-ph.IM↗

arXiv2015

Planck cold clumps in the $λ$ Orionis complex: I. Discovery of an extremely young Class 0 protostellar object and a proto-brown dwarf candidate in a bright rimmed clump PGCC G192.32-11.88

We are performing a series of observations with ground-based telescopes toward Planck Galactic cold clumps (PGCCs) in the $λ$ Orionis complex in order to systematically investigate the effects of stellar feedback. In the particular case of PGCC G192.32-11.88, we discovered an extremely young Class 0 protostellar object (G192N) and a proto-brown dwarf candidate (G192S). G192N and G192S are located in a gravitationally bound bright-rimmed clump. The velocity and temperature gradients seen in line emission of CO isotopologues indicate that PGCC G192.32-11.88 is externally heated and compressed. G192N probably has the lowest bolometric luminosity ($\sim0.8$ L$_{\sun}$) and accretion rate (6.3$\times10^{-7}$ M$_{\sun}$~yr$^{-1}$) when compared with other young Class 0 sources (e.g. PACS Bright Red sources (PBRs)) in the Orion complex. It has slightly larger internal luminosity ($0.21\pm0.01$ L$_{\sun}$) and outflow velocity ($\sim$14 km~s$^{-1}$) than the predictions of first hydrostatic cores (FHSCs). G192N might be among the youngest Class 0 sources, which are slightly more evolved than a FHSC. Considering its low internal luminosity ($0.08\pm0.01$ L$_{\odot}$) and accretion rate (2.8$\times10^{-8}$ M$_{\sun}$~yr$^{-1}$), G192S is an ideal proto-brown dwarf candidate. The star formation efficiency ($\sim$0.3\%-0.4\%) and core formation efficiency ($\sim$1\%) in PGCC G192.32-11.88 are significantly smaller than in other giant molecular clouds or filaments, indicating that the star formation therein is greatly suppressed due to stellar feedback.

astro-ph.GA↗

arXiv2015

Benchmarking the Calculation of Stochastic Heating and Emissivity of Dust Grains in the Context of Radiative Transfer Simulations

We define an appropriate problem for benchmarking dust emissivity calculations in the context of radiative transfer (RT) simulations, specifically including the emission from stochastically heated dust grains. Our aim is to provide a self-contained guide for implementors of such functionality, and to offer insights in the effects of the various approximations and heuristics implemented by the participating codes to accelerate the calculations. The benchmark problem definition includes the optical and calorimetric material properties, and the grain size distributions, for a typical astronomical dust mixture with silicate, graphite and PAH components; a series of analytically defined radiation fields to which the dust population is to be exposed; and instructions for the desired output. We process this problem using six RT codes participating in this benchmark effort, and compare the results to a reference solution computed with the publicly available dust emission code DustEM. The participating codes implement different heuristics to keep the calculation time at an acceptable level. We study the effects of these mechanisms on the calculated solutions, and report on the level of (dis)agreement between the participating codes. For all but the most extreme input fields, we find agreement within 10% across the important wavelength range from 3 to 1000 micron. We conclude that the relevant modules in RT codes can and do produce fairly consistent results for the emissivity spectra of stochastically heated dust grains.

astro-ph.IM↗

arXiv2015

Can we trace very cold dust from its emission alone ?

Context. Dust is a good tracer of cold dark clouds but its column density is difficult to quantify. Aims. We want to check whether the far-infrared and submillimeter high-resolution data from Herschel SPIRE and PACS cameras combined with ground-based telescope bolometers allow us to retrieve the whole dust content of cold dark clouds. Methods. We compare far-infrared and submillimeter emission across L183 to the 8 $μ$m absorption map from Spitzer data and fit modified blackbody functions towards three different positions. Results. We find that none of the Herschel SPIRE channels follow the cold dust profile seen in absorption. Even the ground-based submillimeter telescope observations, although more closely following the absorption profile, cannot help to characterize the cold dust without external information such as the dust column density itself. The difference in dust opacity can reach up to a factor of 3 in prestellar cores of high extinction. Conclusions. In dark clouds, the amount of very cold dust cannot be measured from its emission alone. In particular, studies of dark clouds based only on Herschel data can miss a large fraction of the dust content. This has an impact on core and filament density profiles, masse and stability estimates.

astro-ph.GA↗

arXiv2014

Follow-up observations toward Planck cold clumps with ground-based radio telescopes

The physical and chemical properties of prestellar cores, especially massive ones, are still far from being well understood due to the lack of a large sample. The low dust temperature ($<$14 K) of Planck cold clumps makes them promising candidates for prestellar objects or for sources at the very initial stages of protostellar collapse. We have been conducting a series of observations toward Planck cold clumps (PCCs) with ground-based radio telescopes. In general, when compared with other star forming samples (e.g. infrared dark clouds), PCCs are more quiescent, suggesting that most of them may be in the earliest phase of star formation. However, some PCCs are associated with protostars and molecular outflows, indicating that not all PCCs are in a prestellar phase. We have identified hundreds of starless dense clumps from the mapping survey with the Purple Mountain Observatory (PMO) 13.7-m telescope. Follow-up observations suggest that these dense clumps are ideal targets to search for prestellar objects.

astro-ph.SR↗

arXiv2014

Dust properties inside molecular clouds from coreshine modeling and observations

Context. Using observations to deduce dust properties, grain size distribution, and physical conditions in molecular clouds is a highly degenerate problem. Aims. The coreshine phenomenon, a scattering process at 3.6 and 4.5 $μ$m that dominates absorption, has revealed its ability to explore the densest parts of clouds. We want to use this effect to constrain the dust parameters. The goal is to investigate to what extent grain growth (at constant dust mass) inside molecular clouds is able to explain the coreshine observations. We aim to find dust models that can explain a sample of Spitzer coreshine data. We also look at the consistency with near-infrared data we obtained for a few clouds. Methods. We selected four regions with a very high occurrence of coreshine cases: Taurus-Perseus, Cepheus, Chameleon and L183/L134. We built a grid of dust models and investigated the key parameters to reproduce the general trend of surface bright- nesses and intensity ratios of both coreshine and near-infrared observations with the help of a 3D Monte-Carlo radiative transfer code. The grid parameters allow to investigate the effect of coagulation upon spherical grains up to 5 $μ$m in size derived from the DustEm diffuse interstellar medium grains. Fluffiness (porosity or fractal degree), ices, and a handful of classical grain size distributions were also tested. We used the near- and mostly mid-infrared intensity ratios as strong discriminants between dust models. Results. The determination of the background field intensity at each wavelength is a key issue. In particular, an especially strong background field explains why we do not see coreshine in the Galactic plane at 3.6 and 4.5 $μ$m. For starless cores, where detected, the observed 4.5 $μ$m / 3.6 $μ$m coreshine intensity ratio is always lower than $\sim$0.5 which is also what we find in the models for the Taurus-Perseus and L183 directions. Embedded sources can lead to higher fluxes (up to four times greater than the strongest starless core fluxes) and higher coreshine ratios (from 0.5 to 1.1 in our selected sample). Normal interstellar radiation field conditions are sufficient to find suitable grain models at all wavelengths for starless cores. The standard interstellar grains are not able to reproduce observations and, due to the multi-wavelength approach, only a few grain types meet the criteria set by the data. Porosity does not affect the flux ratios while the fractal dimension helps to explain coreshine ratios but does not seem able to reproduce near-infrared observations without a mix of other grain types. Conclusions. Combined near- and mid-infrared wavelengths confirm the potential to reveal the nature and size distribution of dust grains. Careful assessment of the environmental parameters (interstellar and background fields, embedded or nearby reddened sources) is required to validate this new diagnostic.

astro-ph.GA↗

arXiv2013

Variation in dust properties in a dense filament of the Taurus molecular complex (L1506)

We observed the L1506 filament, which is located in the Taurus molecular complex, with the Herschel PACS and SPIRE instruments. Our aim is to prove the variation in grain properties along the entire length of the filament. In particular, we want to determine above which gas density this variation arises and what changes in the grain optical properties/size distribution are required. We use the 3D radiative transfer code CRT, coupled to the dust emission and extinction code DustEM, to model the emission and extinction of the dense filament. We test a range of optical properties and size distributions for the grains: dust of the diffuse interstellar medium (interstellar PAHs and amorphous carbons and silicates) and both compact and fluffy aggregates. We find that the grain opacity has to increase across the filament to fit simultaneously the near-IR extinction and Herschel emission profiles of L1506. We interpret this change to be a consequence of the coagulation of dust grains to form fluffy aggregates. Grains similar to those in the diffuse medium have to be present in the outer layers of the cloud, whereas aggregates must prevail above gas densities of a few 1000 H/cm3. This corresponds to line-of-sights with visual extinction in the V band of the order of 2 to 3. The dust opacity at 250 microns is raised by a factor of 1.8 to 2.2, while the grain average size is increased by a factor of 5. These exact numbers depend naturally on the dust model chosen to fit the data. Our findings agree with the constraints given by the study of the gas molecular lines. Using a simple approach, we show that the aggregates may have time to form inside the filament within the cloud lifetime. Our model also characterises the density structure of the filament, showing that the filament width is not constant along L1506 but instead varies by a factor of the order of 4.

astro-ph.GA↗

arXiv2013

Luminous Infrared Galaxies With the Submillimeter Array. IV. 12CO J=6-5 Observations of VV 114

We present high-resolution (~2.5") observations of 12CO J=6-5 towards the luminous infrared galaxy VV 114 using the Submillimeter Array. We detect 12CO J=6-5 emission from the eastern nucleus of VV 114 but do not detect the western nucleus or the central region. We combine the new 12CO J=6-5 observations with previously published or archival low-J CO observations, that include 13CO J=1-0 Atacama Large Millimeter/submillimeter Array cycle 0 observations, to analyze the beam-averaged physical conditions of the molecular gas in the eastern nucleus. We use the radiative transfer code RADEX and a Bayesian likelihood code to constrain the temperature (T_kin), density (n(H2)) and column density (N(12CO)) of the molecular gas. We find that the most probable scenario for the eastern nucleus is a cold (T_kin = 38 K), moderately dense (n(H2) = 10^2.89 cm^-3) molecular gas component. We find the most probable 12CO to 13CO abundance ratio ([12CO]/[13CO]) is 229, roughly three times higher than the Milky Way value. This high abundance ratio may explain the observed high 12CO/ 13CO line ratio (> 25). The unusual 13CO J=2-1/J=1-0 line ratio of 0.6 is produced by a combination of moderate 13CO optical depths (tau = 0.4 - 1.1) and extremely subthermal excitation temperatures. We measure the CO-to-H2 conversion factor, alpha_co to be 0.5 M_sol (K km s^-1 pc^2)^-1, which agrees with the widely used factor for ultra luminous infrared galaxies of Downes & Solomon (1998; alpha_co =0.8 M_sol (K km s^-1 pc^2)^-1).

astro-ph.CO↗

arXiv2013

Determination of the far-infrared dust opacity in a prestellar core

(abridged) We correlated near-infrared stellar H-Ks colour excesses of background stars from NTT/SOFI with the far-IR optical depth map, tauFIR, derived from Herschel 160, 250, 350, and 500 um data. The Herschel maps were also used to construct a model for the cloud to examine the effect of temperature gradients on the estimated optical depths and dust absorption cross-sections. A linear correlation is seen between the colour H-Ks and tauFIR up to high extinctions (AV ~ 25). The correlation translates to the average extinction ratio A250um/AJ = 0.0014 +/- 0.0002, assuming a standard near-infrared extinction law and a dust emissivity index beta=2. Using an empirical NH/AJ ratio we obtain an average absorption cross-section per H nucleus of sigmaH(250um) = (1.8 +/- 0.3) * 10^(-25) cm^2 / H-atom, corresponding to a cross-section per unit mass of gas kappaG(250 um) = 0.08 +/- 0.01 cm^2 / g. The cloud model however suggests that owing to the bias caused by temperature changes along the line-of-sight these values underestimate the true cross-sections by up to 40% near the centre of the core. Assuming that the model describes the effect of the temperature variation on tauFIR correctly, we find that the relationship between H-Ks and tauFIR agrees with the recently determined relationship between sigmaH and NH in Orion A. The derived far-IR cross-section agrees with previous determinations in molecular clouds with moderate column densities, and is not particularly large compared with some other cold cores. We suggest that this is connected to the core not beng very dense (the central density is likely to be ~10^5 cm^-3) and judging from previous molecular line data, it appears to be at an early stage of chemical evolution.

astro-ph.GA↗

arXiv2012

Luminous Infrared Galaxies With the Submillimeter Array. III. The Dense Kiloparsec Molecular Concentrations of Arp 299

We have used high resolution (~2.3") observations of the local (D = 46 Mpc) luminous infrared galaxy Arp 299 to map out the physical properties of the molecular gas which provides the fuel for its extreme star formation activity. The 12CO J=3-2, 12CO J=2-1 and 13CO J=2-1 lines were observed with the Submillimeter Array and the short spacings of the 12CO J=2-1 and J=3-2 observations have been recovered using James Clerk Maxwell Telescope single dish observations. We use the radiative transfer code RADEX to estimate the physical properties (density, column density and temperature) of the different regions in this system. The RADEX solutions of the two galaxy nuclei, IC 694 and NGC 3690, are consistent with a wide range of gas components, from warm moderately dense gas with T_{kin} > 30 K and n(H_{2}) ~ 0.3 - 3 x 10^{3} cm^{-3} to cold dense gas with T_{kin} ~ 10-30 K and n(H_{2}) > 3 x 10^{3} cm^{-3}. The overlap region is shown to have a better constrained solution with T_{\rm{kin}}$ ~ 10-50 K and n(H_{2}) ~ 1-30 x 10^{3} cm^{-3}. We estimate the gas masses and star formation rates of each region in order to derive molecular gas depletion times. The depletion times of all regions (20-60 Myr) are found to be about 2 orders of magnitude lower than those of normal spiral galaxies. This rapid depletion time can probably be explained by a high fraction of dense gas on kiloparsec scales in Arp 299. We estimate the CO-to-H_{2} factor, α_{co} to be 0.4 \pm 0.3 (3 x 10^{-4}/ x_{CO}) M_{sol} (K km s^{-1} pc^{2})^{-1} for the overlap region. This value agrees well with values determined previously for more advanced merger systems.

astro-ph.GA↗

arXiv2011

A (sub)millimetre study of dense cores in Orion B9

We aim to further constrain the properties and evolutionary stages of dense cores in Orion B9. The central part of Orion B9 was mapped at 350 micron with APEX/SABOCA. A sample of nine cores in the region were observed in C17O(2-1), H13CO+(4-3) (towards 3 sources), DCO+(4-3), N2H+(3-2), and N2D+(3-2) with APEX/SHFI. These data are used in conjunction with our previous APEX/LABOCA 870-micron dust continuum data. Many of the LABOCA cores show evidence of substructure in the higher-resolution SABOCA image. In particular, we report on the discovery of multiple very low-mass condensations in the prestellar core SMM 6. Based on the 350-to-870 micron flux density ratios, we determine dust temperatures of ~7.9-10.8 K, and dust emissivity indices of ~0.5-1.8. The CO depletion factors are in the range ~1.6-10.8. The degree of deuteration in N2H+ is ~0.04-0.99, where the highest value (seen towards the prestellar core SMM 1) is, to our knowledge, the most extreme level of N2H+ deuteration reported so far. The level of HCO+ deuteration is about 1-2%. We also detected D2CO towards two sources. The detection of subcondensations within SMM 6 shows that core fragmentation can already take place during the prestellar phase. The origin of this substructure is likely caused by thermal Jeans fragmentation of the elongated parent core. A low depletion factor and the presence of gas-phase D2CO in SMM 1 suggest that the core chemistry is affected by the nearby outflow. The very high N2H+ deuteration in SMM 1 is likely to be remnant of the earlier CO-depleted phase.

astro-ph.GA↗

arXiv2011

Mapping the prestellar core Ophiuchus D (L1696A) in ammonia

The gas kinetic temperature in the centres of starless, high-density cores is predicted to fall as low as 5-6 K. The aim of this study was to determine the kinetic temperature distribution in the low-mass prestellar core Oph D where previous observations suggest a very low central temperature. The densest part of the Oph D core was mapped in the NH3(1,1) and (2,2) inversion lines using the Very Large Array (VLA). The physical quantities were derived from the observed spectra by fitting the hyperfine structure of the lines, and subsequently the temperature distribution of Oph D was calculated using the standard rotational temperature techniques. A physical model of the cores was constructed, and the simulated spectra after radiative transfer calculations with a 3D Monte Carlo code were compared with the observed spectra. Temperature, density, and ammonia abundance of the core model were tuned until a satisfactory match with the observation was obtained. The high resolution of the interferometric data reveals that the southern part of Oph D comprises of two small cores. The gas kinetic temperatures, as derived from ammonia towards the centres of the southern and northern core are 7.4 and 8.9 K, respectively. The observed masses of the cores are only 0.2 M_Sun. Their potential collapse could lead to formation of brown dwarfs or low-mass stars.

astro-ph.GA↗

arXiv2011

CH abundance gradient in TMC-1

We observed the 9-cm Lambda-doubling lines of CH along the dense filament of TMC-1. The CH column densities were compared with the total H2 column densities derived using the 2MASS NIR data and previously published SCUBA maps and with OH column densities derived using previous observations with Effelsberg. We also modelled the chemical evolution of TMC-1 adopting physical conditions typical of dark clouds using the UMIST Database for Astrochemistry gas-phase reaction network to aid the interpretation of the observed OH/CH abundance ratios. The CH column density has a clear peak in the vicinity of the cyanopolyyne maximum of TMC-1. The fractional CH abundance relative to H2 increases steadily from the northwestern end of the filament where it lies around 1.0e-8, to the southeast where it reaches a value of 2.0e-8. The OH and CH column densities are well correlated, and we obtained OH/CH abundance ratios of ~ 16 - 20. These values are clearly larger than what has been measured recently in diffuse interstellar gas and is likely to be related to C to CO conversion at higher densities. The good correlation between CH and OH can be explained by similar production and destruction pathways. We suggest that the observed CH and OH abundance gradients are mainly due to enhanced abundances in a low-density envelope which becomes more prominent in the southeastern part and seems to continue beyond the dense filament. An extensive envelope probably signifies an early stage of dynamical evolution, and conforms with the detection of a large CH abundance in the southeastern part of the cloud. The implied presence of other simple forms of carbon in the gas phase provides a natural explanation for the observation of "early-type" molecules in this region.

astro-ph.SR↗

arXiv2010

Physical properties of dense cores in Orion B9

We aim to determine the physical and chemical properties of dense cores in Orion B9. We observed the NH3(1,1) and (2,2), and the N2H+(3-2) lines towards the submm peak positions. These data are used in conjunction with our LABOCA 870 micron dust continuum data. The gas kinetic temperature in the cores is between ~9.4-13.9 K. The non-thermal velocity dispersion is subsonic in most of the cores. The non-thermal linewidth in protostellar cores appears to increase with increasing bolometric luminosity. The core masses are very likely drawn from the same parent distribution as the core masses in Orion B North. Starless cores in the region are likely to be gravitationally bound, and thus prestellar. Some of the cores have a lower radial velocity than the systemic velocity of the region, suggesting that they are members of the "low-velocity part" of Orion B. The observed core-separation distances deviate from the corresponding random-like model distributions. The distances between the nearest-neighbours are comparable to the thermal Jeans length. The fractional abundances of NH3 and N2H+ in the cores are ~1.5-9.8x10^{-8} and ~0.2-5.9x10^{-10}, respectively. The NH3 abundance appears to decrease with increasing H2 column and number densities. The NH3/N2H+ column density ratio is larger in starless cores than in cores with embedded protostars. The core population in Orion B9 is comparable in physical properties to those in nearby low-mass star-forming regions. It is unclear if the origin of cores could be explained by turbulent fragmentation. On the other hand, many of the core properties conform with the picture of dynamic core evolution. The Orion B9 region has probably been influenced by the feedback from the nearby Ori OB 1b group, and the fragmentation of the parental cloud into cores could be caused by gravitational instability.

astro-ph.GA↗

arXiv2009

The Power Spectrum of Turbulence in NGC 1333: Outflows or Large-Scale Driving?

Is the turbulence in cluster-forming regions internally driven by stellar outflows or the consequence of a large-scale turbulent cascade? We address this question by studying the turbulent energy spectrum in NGC 1333. Using synthetic 13CO maps computed with a snapshot of a supersonic turbulence simulation, we show that the VCS method of Lazarian and Pogosyan provides an accurate estimate of the turbulent energy spectrum. We then apply this method to the 13CO map of NGC 1333 from the COMPLETE database. We find the turbulent energy spectrum is a power law, E(k) k^-beta, in the range of scales 0.06 pc < ell < 1.5 pc, with slope beta=1.85\pm 0.04. The estimated energy injection scale of stellar outflows in NGC 1333 is ell_inj 0.3 pc, well resolved by the observations. There is no evidence of the flattening of the energy spectrum above the scale ell_inj predicted by outflow-driven simulations and analytical models. The power spectrum of integrated intensity is also a nearly perfect power law in the range of scales 0.16 pc < ell < 7.9 pc, with no feature above ell_inj. We conclude that the observed turbulence in NGC 1333 does not appear to be driven primarily by stellar outflows.

astro-ph.GA↗