arXiv subjects

Mikhail Korobko

Publications and source records attributed to Mikhail Korobko.

At least 19 recordsLinked to original sources

arXiv2026

Assessing the Impact of Instrumental Requirements on the Scientific Performance of the Einstein Telescope

We investigate the relationship between instrumental requirements and the scientific performance of the Einstein Telescope (ET), a third-generation (3G) gravitational-wave (GW) observatory. Different technical design choices result in distinct noise budgets, ultimately shaping the detector's scientific capabilities. To systematically assess and compare their impact, we define a comprehensive set of performance metrics spanning compact binary coalescence (CBC) detection and parameter estimation, as well as other sources, including stochastic GW backgrounds, isolated spinning neutron stars, and core-collapse supernovae (CCSNe). We build a comparative reference framework that links degradations in specific noise contributions and frequency bands to losses in scientific capabilities. We consider a representative selection of technical parameters, such as coating and suspension temperatures, the filter cavity length in the low-frequency instrument, and the beam size in the high-frequency instrument. We evaluate how sensitivity variations across specific frequency bands affect different scientific objectives. We quantify how the sensitivity below 30 Hz impacts the detectability of massive and/or high-redshift sources and the reconstruction of long-duration CBC signals, affecting early warning and sky localization for binary neutron stars (BNSs). Sensitivity in the 30-450 Hz range governs most CBC parameter-estimation metrics, while high-frequency sensitivity above ~450 Hz predominantly impacts BNS post-merger studies and CCSN detectability, with modest effects on detection rates. Even with the most significant degradations considered, the ET science case remains robust overall. Our results provide a comprehensive benchmark linking scientific objectives to instrumental requirements, particularly important as the final design and infrastructure of 3G observatories are being defined.

astro-ph.IM↗

arXiv2026

Hyperloss from coherent spatial-mode mixing in quantum-correlated networks

Quantum-correlated networks distribute quantum resources such as squeezed and entangled states. These states are central to modern quantum technology, including photonic quantum computing, quantum communications, non-destructive biological sensing and gravitational-wave detection. Even for squeezed states of light - the most robust quantum-correlated resource - loss-induced decoherence remains the dominant obstacle to strong quantum advantage in in large-scale interferometric and networked quantum systems. Common design assumption in these applications is treating mismatches between spatial modes as a small, incoherent loss. Here we show that this picture can fail: coherent spatial-mode mixing with higher-order spatial modes can produce an apparent loss exceeding 100% relative to the initial squeezing, a regime we term hyperloss. We experimentally demonstrate hyperloss in a minimal two-node quantum network: with only 8% mode mismatch, a 5.8dB squeezed state is converted into an effectively thermal state with no quadrature squeezing, eliminating the quantum advantage. Because the effect is coherent, it is controllable: lost correlations can be recovered by tuning differential spatial-mode phases (e.g., Gouy-/propagation-phase). We demonstrate this recovery experimentally, not only eliminating the hyperloss, but even significantly suppressing the mode mismatch loss, with 15% geometric mismatch acting like only ~2.8% effective loss. Hyperloss is a design-limiting mechanism for all quantum networks with squeezed light, from from photonic quantum processors to large-scale interferometers and distributed quantum-sensing networks. Our results provide a practical route to avoid hyperloss and turn mode mismatch into an explicit, phase-aware design parameter for future quantum technologies.

quant-ph↗

arXiv2025

Quadrature-witness readout for backscatter mitigation in gravitational-wave detectors limited by back-action

Disturbances in gravitational wave (GW) observational data are often caused by non-stationary noise in the detector itself, such as back-scattering of laser stray light into the signal field. Unlike GW signals, non-stationary noise can appear in both the GW-signal quadrature and the orthogonal quadrature, which is usually not measured. Simultaneous sensing of this orthogonal quadrature provides a witness channel that can be used to reconstruct the disturbance in the signal quadrature enabling a subtraction of non-stationary noise. Here, we present the concept of quadrature witness that is compatible with frequency-dependent squeezing, which is already used to simultaneously reduce photon shot noise and photon radiation pressure noise. We demonstrate that implementing this approach in a GW detector could reduce noise caused by loud back-scatter events, thereby improving the overall sensitivity and robustness of GW observatories.

physics.ins-det↗

arXiv2025

Simultaneous Speedmeter and Position-Meter Response in a Single Tabletop Interferometer

Quantum radiation-pressure noise (QRPN) limits the low-frequency sensitivity of gravitational wave detectors. The established method for suppressing QRPN is the injection of frequency-dependent squeezed light. It requires long-baseline filter cavities introducing substantial experimental complexity. A completely different interferometer concept is the speedmeter. It avoids QRPN at the source by measuring test mass speed instead of position. While extensively researched theoretically, speedmeters are yet to be demonstrated with a moving test mass in an optomechanical setting. In this work, we present the first experimental observation of speedmeter behavior in a system with a movable test mass. We realize a novel hybrid readout cavity configuration that enables simultaneous extraction of position and speed signals from two distinct output ports. We compare the optical transfer functions associated with each channel and observe the expected scaling behavior that distinguishes a speedmeter from a position-meter. We support our observations with a detailed theoretical model, showing how the hybrid readout cavity implements key speedmeter features. Our results underscore the relevance of the speedmeter concept as an alternative for mitigating QRPN in future detectors and lay the groundwork for further experimental exploration.

quant-ph↗

arXiv2024

Optical sensitivities of current gravitational wave observatories at higher kHz, MHz and GHz frequencies

GEO 600, Kagra, LIGO, and Virgo were built to observe gravitational waves at frequencies in the audio band, where the highest event rates combined with the largest signal to noise ratios had been predicted. Currently, hypothetical sources of cosmological origin that could have produced signals at higher frequencies are under discussion. What is not widely known is that current interferometric GW observatories have a frequency comb of high optical sensitivity that encompasses these high frequencies. Here we calculate the high-frequency noise spectral densities of operating GW observatories under the justified assumption that photon shot noise is the dominant noise source. We explain the underlying physics of why high sensitivity is achieved for all integer multiples of the free spectral ranges of the observatory's resonators when an interferometer arm is not orientated perpendicular to the propagation direction of the GW. Proposals for new concepts of high-frequency GW detectors must be compared with the high-frequency sensitivities presented here.

astro-ph.IM↗

arXiv2024

Observation of Noise Suppression during High-Efficiency Wavelength Doubling of Intense Quasi-Monochromatic Laser Light

Ultra-stable, quasi-monochromatic laser light forms the basis for high-precision interferometric measurements, e.g. for observing gravitational waves and for time keeping with optical clocks. Optical frequency conversion enables access to wavelengths at which optical materials have the lowest absorption and the lowest mechanical loss. Here we report a 25 % reduction in relative intensity noise (of technical origin) when converting 1064 nm to 2128 nm for powers far above parametric oscillation threshold. The new wavelength has high potential for improving gravitational wave detection and other ultra-high-precision experiments as well. Our results provide a better understanding of the dynamics of nonlinear optical processes and have great potential for the stabilisation of laser sources in optical sensing and metrology.

physics.optics↗

arXiv2024

Coherent feedback for quantum expander in gravitational wave observatories

The observation of gravitational waves from binary neutron star mergers offers insights into properties of extreme nuclear matter. However, their high-frequency signals in the kHz range are often masked by quantum noise of the laser light used. Here, we propose the "quantum expander with coherent feedback", a new detector design that features an additional optical cavity in the detector output and an internal squeeze operation. This approach allows to boost the sensitivity at high frequencies, at the same time providing a compact and tunable design for signal extraction. It allows to tailor the sensitivity of the detector to the specific signal frequency range. We demonstrate that our design allows to improve the sensitivity of the high-frequency detector concept NEMO (neutron star extreme matter observatory), increasing the detection rates by around 15%. Our approach promises new level of flexibility in designing the detectors aiming at high-frequency signals.

physics.ins-det↗

arXiv2023

Transverse Mode Control in Quantum Enhanced Interferometers: A Review and Recommendations for a New Generation

Adaptive optics has made significant advancement over the past decade, becoming the essential technology in a wide variety of applications, particularly in the realm of quantum optics. One key area of impact is gravitational-wave detection, where quantum correlations are distributed over kilometer-long distances by beams with hundreds of kilowatts of optical power. Decades of development were required to develop robust and stable techniques to sense mismatches between the Gaussian beams and the resonators, all while maintaining the quantum correlations. Here we summarize the crucial advancements in transverse mode control required for gravitational-wave detection. As we look towards the advanced designs of future detectors, we highlight key challenges and offer recommendations for the design of these instruments. We conclude the review with a discussion of the broader application of adaptive optics in quantum technologies: communication, computation, imaging and sensing.

physics.optics↗

arXiv2023

Fundamental sensitivity limit of lossy cavity-enhanced interferometers with external and internal squeezing

Quantum optical sensors are ubiquitous in various fields of research, from biological or medical sensors to large-scale experiments searching for dark matter or gravitational waves. Gravitational-wave detectors have been very successful in implementing cavities and quantum squeezed light for enhancing sensitivity to signals from black hole or neutron star mergers. However, the sensitivity to weak forces is limited by available energy and optical decoherence in the system. Here, we derive the fundamental sensitivity limit of cavity and squeezed-light enhanced interferometers with optical loss.This limit is attained by the optimal use of an additional internal squeeze operation, which allows to mitigate readout loss. We demonstrate the application of internal squeezing to various scenarios and confirm that it indeed allows to reach the best sensitivity in cavity and squeezed-light enhanced linear force sensors. Our work establishes the groundwork for the future development of optimal sensors in real-world scenarios where, up until now, the application of squeezed light was curtailed by various sources of decoherence.

quant-ph↗

arXiv2023

Mitigating quantum decoherence in force sensors by internal squeezing

The most efficient approach to laser interferometric force sensing to date uses monochromatic carrier light with its signal sideband spectrum in a squeezed vacuum state. Quantum decoherence, i.e. mixing with an ordinary vacuum state due to optical losses, is the main sensitivity limit. In this work, we present both theoretical and experimental evidence that quantum decoherence in high-precision laser interferometric force sensors enhanced with optical cavities and squeezed light injection can be mitigated by a quantum squeeze operation inside the sensor's cavity. Our experiment shows an enhanced measurement sensitivity that is independent of the optical readout loss in a wide range. Our results pave the way for quantum improvements in scenarios where high decoherence previously precluded the use of squeezed light. Our results hold significant potential for advancing the field of quantum sensors and enabling new experimental approaches in high-precision measurement technology.

quant-ph↗

arXiv2023

Enhanced optomechanical interaction in the unbalanced interferometer

Quantum optomechanical systems enable the study of fundamental questions on quantum nature of massive objects. For that a strong coupling between light and mechanical motion is required, which presents a challenge for massive objects. In particular large interferometric sensors with low frequency oscillators are difficult to bring into quantum regime. Here we propose a modification of the Michelson-Sagnac interferometer, which allows to boost the optomechanical coupling strength. This is done by unbalancing the central beam-splitter of the interferometer, allowing to balance two types of optomechanical coupling present in the system: dissipative and dispersive. We analyse two different configurations, when the optomechanical cavity is formed by the mirror for the laser pump field (power-recycling), and by the mirror for the signal field (signal-recycling). We show that the imbalance of the beam splitter allows to dramatically increase the optical cooling of the test mass motion. We also formulate the conditions for observing quantum radiation-pressure noise and ponderomotive squeezing. Our configuration can serve as the basis for more complex modifications of the interferometer that would utilize the enhanced coupling strength. This will allow to efficiently reach quantum state of large test masses, opening the way to studying fundamental aspects of quantum mechanics and experimental search for quantum gravity.

quant-ph↗

arXiv2022

Macroscopic quantum mechanics in gravitational-wave observatories and beyond

The existence of quantum correlations affects both microscopic and macroscopic systems. On macroscopic systems they are difficult to observe and usually irrelevant for the system's evolution due to the frequent energy exchange with the environment. The world-wide network of gravitational-wave (GW) observatories exploits optical as well as mechanical systems that are highly macroscopic and largely decoupled from the environment. The quasi-monochromatic light fields in the kilometre-scale arm resonators have photon excitation numbers larger than $10^{19}$, and the mirrors that are quasi-free falling in propagation direction of the light fields have masses of around 40 kg. Recent observations on the GW observatories LIGO and Virgo clearly showed that the quantum uncertainty of one system affected the uncertainty of the other. Here, we review these observations and provide links to research goals targeted with mesoscopic optomechanical systems in other fields of fundamental physical research. These may have Gaussian quantum uncertainties as the ones in GW observatories or even non-Gaussian ones, such as Schrödinger cat states.

quant-ph↗

arXiv2021

Legacy of the First Workshop on Gravitational Wave Astrophysics for Early Career Scientists

Gravitational wave science is a dynamical, fast-expanding research field founded on results, tools and methodologies drawn from different research areas and communities. Early career scientists entering this field must learn and combine knowledge and techniques from a range of disciplines. The Workshop on Gravitational-Wave Astrophysics for Early Career Scientists (GWAECS), held virtually in May 2021, planted the seeds of an interdisciplinary, well-connected and all-inclusive community of early career scientists working on gravitational waves, able to exchange relevant information and ideas, build a healthy professional and international environment, share and learn valuable skills, and ensure that ongoing research efforts are perpetuated and expanded in order to attain the main scientific goals envisioned by the whole community. GWAECS was the first event unifying early career scientists belonging to different communities, historically associated with different large-scale gravitational wave experiments. It provided a broad perspective on the future of gravitational waves, offered training on soft and transferable skills and allowed ample time for informal discussions between early career scientists and well-known research experts. The essence of those activities is summarised and collected in the present document, which presents a recap of each session of the workshop and aims to provide all early career scientists with a long-lasting, useful reference which constitutes the legacy of all the ideas that circulated at GWAECS.

gr-qc↗

arXiv2020

Squeezed-light interferometry on a cryogenically-cooled micro-mechanical membrane

Squeezed states of light reduce the signal-normalized photon counting noise of measurements without increasing the light power and enable fundamental research on quantum entanglement in hybrid systems of light and matter. Furthermore, the completion of squeezed states with cryo-cooling has high potential. First, measurement sensitivities are usually limited by quantum noise and thermal noise. Second, squeezed states allow for reducing the heat load on cooled devices without losing measurement precision. Here, we demonstrate squeezed-light position sensing of a cryo-cooled micro-mechanical membrane. The sensing precision is improved by up to 4.8 dB below photon counting noise, limited by optical loss in two Faraday rotators, at a membrane temperature of about 20K, limited by our cryo-cooler. We prove that realising a high interference contrast in a cryogenic Michelson interferometer is feasible. Our setup is the first conceptual demonstration towards the envisioned European gravitational-wave detector, the 'Einstein Telescope', which is planned to use squeezed states of light together with cryo-cooling of its mirror test masses.

quant-ph↗

arXiv2020

A Cryogenic Silicon Interferometer for Gravitational-wave Detection

The detection of gravitational waves from compact binary mergers by LIGO has opened the era of gravitational wave astronomy, revealing a previously hidden side of the cosmos. To maximize the reach of the existing LIGO observatory facilities, we have designed a new instrument that will have 5 times the range of Advanced LIGO, or greater than 100 times the event rate. Observations with this new instrument will make possible dramatic steps toward understanding the physics of the nearby universe, as well as observing the universe out to cosmological distances by the detection of binary black hole coalescences. This article presents the instrument design and a quantitative analysis of the anticipated noise floor.

astro-ph.IM↗

arXiv2019

Demonstration of interferometer enhancement through EPR entanglement

The sensitivity of laser interferometers used for the detection of gravitational waves (GWs) is limited by quantum noise of light. An improvement is given by light with squeezed quantum uncertainties, as employed in the GW detector GEO600 since 2010. To achieve simultaneous noise reduction at all signal frequencies, however, the spectrum of squeezed states needs to be processed by 100m-scale low-loss optical filter cavities in vacuum. Here, we report on the proof-of-principle of an interferometer setup that achieves the required processed squeezed spectrum by employing Einstein-Podolsky-Rosen (EPR) entangled states. Applied to GW detectors, the cost-intensive cavities would become obsolete, while the price to pay is a 3dB quantum penalty.

quant-ph↗

arXiv2019

Coherent coupling completes an unambiguous optomechanical classification framework

In most optomechanical systems a movable mirror is a part of an optical cavity, and its oscillation modulates either the resonance frequency of the cavity, or its coupling to the environment. There exists the third option -- which we call a "coherent coupling" -- when the mechanical oscillation couples several non-degenerate optical modes supported by the cavity. Identifying the nature of the coupling can be an important step in designing the setup for a specific application. In order to unambiguously distinguish between different optomechanical couplings, we develop a general framework based on the Hamiltonian of the system. Using this framework we give examples of different couplings, and discuss in details one particular case of a purely coherent coupling in a ring cavity with a movable mirror inside. We demonstrate that in certain cases coherent coupling can be beneficial for cooling the motion of the mechanical oscillator. Our general framework allows to approach the design of optomechanical experiments in a methodological way, for precise exploitation of the strengths of particular optomechanical couplings.

quant-ph↗

arXiv2019

Quantum expander for gravitational-wave observatories

Quantum uncertainty of laser light limits the sensitivity of gravitational-wave observatories. In the past 30 years, techniques for squeezing the quantum uncertainty as well as for enhancing the gravitational-wave signal with optical resonators were invented. Resonators, however, have finite linewidths; and the high signal frequencies that are produced during the scientifically highly interesting ring-down of astrophysical compact-binary mergers cannot be resolved today. Here, we propose an optical approach for expanding the detection bandwidth. It uses quantum uncertainty squeezing inside one of the optical resonators, compensating for finite resonators' linewidths while maintaining the low-frequency sensitivity unchanged. Introducing the quantum expander for boosting the sensitivity of future gravitational-wave detectors, we envision it to become a new tool in other cavity-enhanced metrological experiments.

quant-ph↗