arXiv subjects

Mikhail Kostylev

Publications and source records attributed to Mikhail Kostylev.

At least 19 recordsLinked to original sources

arXiv2024

Boundary conditions for and ferromagnetic resonance spectra of magnetic bilayers coupled by interlayer Dzyaloshinskii-Moriya interactions

Interfacial Dzyaloshinskii-Moriya interaction (IF-DMI) leads to non-collinear spin configurations within the magnetic layers of multilayer heterostructures, while its interlayer counterpart (IL-DMI) minimizes chiral states between the layers. Here, we demonstrate that the symmetries of these interactions are very different, even though both arise from pairwise exchange interactions between magnetic sites mediated by nonmagnetic atoms. By deriving new boundary conditions for the exchange operator and solving the associated boundary value problem, we show that, unlike IF-DMI, which does not contribute to the FMR frequencies, IL-DMI alters the frequencies of the fundamental FMR modes and can be separated from other contributions in an FMR experiment.

cond-mat.mes-hall↗

arXiv2024

Dynamic FMR and magneto-optical response of hydrogenated FCC phase Fe25Pd75 thin films and micro patterned devices

In this work, we investigate the effects of H2 on the physical properties of Fe25Pd75. Broadband ferromagnetic resonance (FMR) spectroscopy revealed a significant FMR peak shift induced by H2 absorption for the FCC phased Fe25Pd75. The peak shifted towards higher applied fields, which is contrary to what was previously observed for CoPd alloys. Additionally, we conducted structural and magneto-optical Kerr ellipsometric studies on the Fe25Pd75 film and performed density functional theory calculations to explore the electronic and magnetic properties in both hydrogenated and dehydrogenated states. In the final part of this study, we deposited a Fe25Pd75 layer on top of a microscopic coplanar transmission line and investigated the FMR response of the layer while driven by a microwave current in the coplanar line. We observed a large amplitude FMR response upon hydrogen absorption, as well as desorption rates when cycling between pure N2 and a mixture of 3% H2 + 97% N2.

cond-mat.mtrl-sci↗

arXiv2023

External magnetic fields enhance capture of magnetic nanoparticles flowing through molded microfluidic channels by ferromagnetic nanostructures

Magnetic nanoparticles (MNPs) have many applications which require MNPs to be captured and immobilized for their manipulation and sensing. For example, MNP sensors based on detecting changes to the ferromagnetic resonances of an antidot nanostructure exhibit better performance when the nanoparticles are captured within the antidot inclusions. This study investigates the influence of microfluidics upon the capture of MNPs by four geometries of antidot array nanostructures hollowed into 30 nm-thick Permalloy films. The nanostructures were exposed to a dispersion of 130 nm MNP clusters which passed through PDMS microfluidic channels with a 400 μm circular cross-section fabricated from wire molds. With the microfluidic flow of MNPs, the capture efficiency - the ratio between the number of nanoparticles captured inside of the antidot inclusions to the number outside the inclusions - decreased for all four geometries compared to previous results introducing the particles via droplets on the film surface. This indicates that most MNPs were passing over the nanostructures, since there were no significant magnetophoretic forces acting upon the particles. However, when a static magnetic field is applied, the magnetophoretic forces generated by the nanostructure are stronger and the capture efficiencies are significantly higher than those obtained using droplets. In particular, circular antidots demonstrated the highest capture efficiency among the four geometries of almost 83.1% when the magnetic field is parallel to the film plane. In a magnetic field perpendicular to the film, the circle antidots again show the highest capture efficiency of about 77%. These results suggest that the proportion of nanoparticles captured inside antidot inclusions is highest under a parallel magnetic field. Clearly, the geometry of the nanostructure has a strong influence on the capture of MNPs.

cond-mat.mes-hall↗

arXiv2023

Enhancing the Capture of Magnetic Nanoparticles Inside of Ferromagnetic Nanostructures Using External Magnetic Fields

The influence of an external magnetic field upon the capture of 130 nm magnetic nanoparticles (MNPs) by ferromagnetic nanostructures was investigated. The magnetophoretic forces acting upon a nanoparticle were simulated in external magnetic fields parallel and perpendicular to ferromagnetic nanostructures consisting of arrays of antidots and dots. Changing the direction of the external field was found to dramatically alter the magnetophoretic forces acting on the particle and the trajectories of the MNPs. A field parallel to the nanostructures' surfaces generated magnetophoretic forces that directed the nanoparticle into the nanostructures. A perpendicular field produced forces directing particles onto the structures' surfaces. Nanostructures were etched into the surfaces of Permalloy films using ion beam lithography. MNPs were then deposited onto the films' surfaces under a parallel or perpendicular magnetic field. The distributions of particles in the nanostructures were analysed to obtain the capture efficiencies of each structure which indicate the proportion of particles trapped inside. Without an external field, the highest efficiency was displayed by arrays of circular antidots with circular dot arrays displaying the lowest. Antidot arrays displayed higher capture efficiencies than dot arrays. Addition of a field parallel to the surface significantly increased the capture efficiencies and addition of a field perpendicular to the surface decreased the efficiencies. Under the perpendicular field, the particles were instead caught on the outer edges of the nanostructures. These results suggest that application of a parallel external magnetic field promotes the capture of MNPs within ferromagnetic nanostructures and a perpendicular field increases the capture of MNPs onto the outer surface and edges of nanostructures.

cond-mat.mes-hall↗

arXiv2023

Magnonic Hong-Ou-Mandel Effect

We carried out numerical simulations of propagation of spin waves (magnons in quantum language) in a yttrium-iron garnet film. The numerical model is based on an original formalism. We demonstrated that a potential barrier for magnons, created by an Oersted field of a dc current flowing through a wire sitting on top of the film, is able to act as an electrically controlled partly transparent mirror for the magnons. We found that the mirror transparency can be set to 50% by properly adjusting the current strength, thus creating a semi-transparent mirror. A strong Hong-Ou-Mandel Effect for single magnons is expected in this configuration. The effect must be seen as two single magnons, launched simultaneously into the film from two transducers located from the opposite sides of the mirror, creating a two-microwave-photon state at the output port of one of the transducers. The probability of seeing those two-photon states at the output port of either transducer must be the same for both transducers.

cond-mat.mes-hall↗

arXiv2023

Quantifying symmetric exchange in ultrathin ferromagnetic films with chirality

The symmetric (Heisenberg) exchange interaction is fundamental to magnetism and assumes critical importance in designing magnetic materials for novel emergent phenomena and device applications. However, quantifying exchange is extremely challenging for ultrathin ($\sim$ 1 nm) magnetic films, as techniques and approximations reliably used for bulk materials are largely inapplicable in the two-dimensional (2D) limit. Here we present and contrast the measurement of exchange stiffness, $A$, by several methods on a series of five Co/Pt-based ultrathin ($1-2$ nm) films. We compare results from (a) spin-wave spectroscopy by Brillouin light scattering (BLS), (b) three analytical models describing the temperature dependence of magnetization obtained by magnetometry, (c) microscopic domain periodicity measurements and simulations, and (d) ab initio density functional theory (DFT) calculations. While different methods present some qualitatively consistent trends across samples, we note, for any given sample, considerable differences (up to $5\times$) in the absolute values of $A$ across the techniques, consistent with discrepancies of $A$ reported in literature for nominally similar samples. We analyze possible sources of the discrepancies across various methods, notably including their relationship to the spin-wave dispersion, and the wave-vector ranges probed. We compare the strengths and limitations of the techniques, and outline directions for their future use in characterizing exchange interactions in ultrathin films.

cond-mat.mtrl-sci↗

arXiv2022

Excitation and reception of magnetostatic surface spin waves in thin conducting ferromagnetic films by coplanar microwave antennas. Part I: Theory

A fully self-consistent model for the excitation and reception of magnetostatic surface waves in thin ferromagnetic films by a set of coplanar antennas was developed and implemented numerically. The model assumes that the ferromagnetic film is highly conducting and is interfaced with non-magnetic metallic films, but is also suitable for modeling magneto-insulating films. Perpendicular magnetic anisotropy and Dzyaloshinskii-Moriya interaction can be included at both interfaces of the ferromagnetic layer. The model calculates the coupling impedances between the different strips constituting the coplanar antennas. In some situations, this leads to a frequency non-reciprocity between counter-propagating waves even in the case of no asymmetry in the spin-wave dispersion relation. Several intermediate results of the model were checked numerically and the final output of the model, given as the scattering parameters, $S_{11}$, $S_{12}$, and $S_{21}$ of the antenna system, were in good agreement with previous experimental studies.

physics.app-ph↗

arXiv2022

Excitation and reception of magnetostatic surface spin waves in thin conducting ferromagnetic films by coplanar microwave antennas. Part II: Experiment

We report on propagating spin-wave spectroscopy measurements carried out on coplanar nano-antenna devices made from a Si/SiO$_2$/Ru(5nm)/Co(20)/Pt(5nm) film. The measurements were analyzed in detail by employing newly developed theoretical modeling and de-embedding procedures. The magnetic parameters of the film were determined by complementary Brillouin light scattering and ferromagnetic resonance measurements. The propagating spin wave signals could be accounted for quantitatively for the range of externally applied magnetic fields investigated in this study: 130-1500 Oe.

physics.app-ph↗

arXiv2021

Magneto-electronic hydrogen gas sensors: a critical review

Devices enabling early detection of low concentrations of leaking hydrogen and precision measurements in a wide range of hydrogen concentrations in hydrogen storage systems are essential for the mass-production of fuel-cell vehicles and, more broadly, for the transition to the hydrogen economy. Whereas several competing sensor technologies are potentially suitable for this role, ultra-low fire-hazard, contactless and technically simple magneto-electronic sensors stand apart because they have been able to detect the presence of hydrogen gas in a range of hydrogen concentrations from 0.06% to 100% at atmospheric pressure with the response time approaching the industry gold standard of one second. This new kind of hydrogen sensors is the subject of this review article, where we inform the academic physics, chemistry, material science and engineering communities as well as industry researchers about the recent developments in the field of magneto-electronic hydrogen sensors, including those based on magneto-optical Kerr effect, anomalous Hall effect and Ferromagnetic Resonance with a special focus on Ferromagnetic Resonance (FMR) based devices. In particular, we present the physical foundations of magneto-electronic hydrogen sensors and we critically overview their advantages and disadvantages for applications in the vital areas of the safety of hydrogen-powered cars and hydrogen fuelling stations as well as hydrogen concentration meters, including those operating directly inside hydrogen-fuelled fuel cells. We believe that this review will be of interest to a broad readership, also facilitating the translation of research results into policy and practice.

cond-mat.mtrl-sci↗

arXiv2021

Implementing a magnonic time-delay reservoir computer model

Recently we demonstrated experimentally that microwave oscillators based on the time delay feedback provided by traveling spin waves could operate as reservoir computers. In the present paper, we extend this concept by adding the feature of time multiplexing made available by the large propagation times/distances of traveling spin waves. The system utilizes the nonlinear behavior of propagating magnetostatic surface spin waves in a yttrium-iron garnet thin film and the time delay inherent in the active ring configuration to process time dependent data streams. Higher reservoir dimensionality is obtained through the time-multiplexing method, emulating "virtual" neurons as temporally separated spin-wave pulses circulating in the active ring below the auto-oscillation threshold. To demonstrate the efficacy of the concept, the active ring reservoir computer is evaluated on the short-term memory and parity check benchmark tasks, and the physical system parameters are tuned to optimize performance. By incorporating a reference line to mix the input signal directly onto the active ring output, both the amplitude and phase nonlinearity of the spin waves can be exploited, resulting in significant improvement on the nonlinear parity check task. We also find that the fading memory capacity of the system can be easily tuned by controlling the active ring gain. Finally, we show that the addition of a second spin-wave delay line configured to transmit backward volume spin waves can partly compensate dispersive pulse broadening and enhance the fading memory capacity of the active ring.

physics.app-ph↗

arXiv2020

Controlling the propagation of dipole-exchange spin waves using local inhomogeneity of the anisotropy

Spin waves are promising candidates to carry, transport, and process information. Controlling the propagation characteristics of spin waves in magnetic materials is an essential ingredient for designing spin-wave based computing architectures. Here, we study the influence of surface inhomogeneities on the spin-wave signals transmitted through thin films. We use micromagnetic simulations to study the spin-wave dynamics in an in-plane magnetized yttrium iron garnet thin film with a thickness in the nanometre range in the presence of surface defects in the form of locally introduced uniaxial anisotropies. These defects are used to demonstrate that the Backward Volume Magnetostatic Spin Waves (BVMSW) are more responsive to backscattering in comparison to Magnetostatic Surface Spin Waves (MSSWs). For this particular defect type, the reason for this behavior can be quantitatively related to the difference in the magnon band structures for the two types of spin waves. To demonstrate this, we develop a quasi-analytical theory for the scattering process. It shows an excellent agreement with the micromagnetic simulations, sheds light on the backscattering processes and provides a new way to analyze the spin-wave transmission rates in the presence of surface inhomogeneities in sufficiently thin films, for which the role of exchange energy in the spin-wave dynamics is significant. Our study paves the way to designing magnonic logic devices for data processing which rely on a designed control of the spin-wave transmission.

physics.app-ph↗

arXiv2020

Spoken digit classification using a spin-wave delay-line active-ring reservoir computing

As a test of general applicability, we use the recently proposed spin-wave delay line active-ring reservoir computer to perform the spoken digit recognition task. On this, classification accuracies of up to 93% are achieved. The tested device prototype employs improved spin wave transducers (antennas). Therefore, in addition, we also let the computer complete the short-term memory (STM) task and the parity check (PC) tasks, because the fading memory and nonlinearity are essential to reservoir computing performance. The resulting STM and PC capacities reach maximum values of 4.77 and 1.47 respectively.

cs.NE↗

arXiv2019

Reservoir computing using a spin-wave delay line active ring resonator

The authors demonstrate the use of a propagating spin waves for implementing a reservoir computing architecture. The proposed concept utilises an active ring resonator comprising a magnetic thin film delay line integrated into a feedback loop. These systems exhibit strong nonlinearity and delayed response behaviour, two important properties required for an effective reservoir computing implementation. In a simple design, we exploit the nonlinear damping of spin waves at different feedback gains to inject input data into the active ring resonator and use a microwave diode to read out the amplitude of the spin waves circulating in the ring. We employ two baseline tasks, namely the short term memory and parity check tasks, to evaluate the suitability of this architecture for processing time series data.

physics.app-ph↗

arXiv2019

Manipulation of Inverse Spin Hall Effect in Palladium by Absorption of Hydrogen Gas

The spintronic properties of a palladium thin film have been investigated in the presence of hydrogen gas in cobalt/palladium bilayers. Measurements of the inverse spin Hall Effect (ISHE) using cavity ferromagnetic resonance allow estimations of the spin Hall conductivity and spin diffusion length in both nitrogen and hydrogen gas atmospheres. Unwanted spin rectification effects are removed using a simple method of inverting the spin current direction with respect to the measurement setup. Absorption of hydrogen gas in the Pd layer at just 3% concentration results in a reduced ISHE voltage amplitude and bilayer resistance. Fitting the ISHE voltage against the Pd layer thickness demonstrates that the spin diffusion length decreases by 23% in the presence of a hydrogen gas. On the other hand, the results indicate that there is no significant change in the spin Hall conductivity of Pd due to hydrogen absorption.

cond-mat.mtrl-sci↗

arXiv2018

Cavity Magnon Polaritons with Lithium Ferrite and 3D Microwave Resonators at milli-Kelvin Temperatures

Single crystal Lithium Ferrite (LiFe) spheres of sub-mm dimension are examined at mK temperatures, microwave frequencies and variable DC magnetic field, for use in hybrid quantum systems and condensed matter and fundamental physics experiments. Strong coupling regimes of the photon-magnon interaction (cavity magnon polariton quasi-particles) were observed with coupling strength of up to 250 MHz at 9.5 GHz (2.6\%) with magnon linewidths of order 4 MHz (with potential improvement to sub-MHz values). We show that the photon-magnon coupling can be significantly improved and exceed that of the widely used Yttrium Iron Garnet crystal, due to the small unit cell of LiFe, allowing twice more spins per unit volume. Magnon mode softening was observed at low DC fields and combined with the normal Zeeman effect creates magnon spin wave modes that are insensitive to first order order magnetic field fluctuations. This effect is observed in the Kittel mode at 5.5 GHz (and another higher order mode at 6.5 GHz) with a DC magnetic field close to 0.19 Tesla. We show that if the cavity is tuned close to this frequency, the magnon polariton particles exhibit an enhanced range of strong coupling and insensitivity to magnetic field fluctuations with both first order and second order insensitivity to magnetic field as a function of frequency (double magic point clock transition), which could potentially be exploited in cavity QED experiments.

cond-mat.str-el↗

arXiv2018

Sensitivity of ferromagnetic resonance in PdCo alloyed films to hydrogen gas

In this work we studied the ferromagnetic resonance response of Co(x)Pd(1-x) alloy samples with different cobalt contents (x = 0.65, 0.39, 0.24 & 0.14). We found significant differences in the response of the samples to the presence of hydrogen gas in the samples' environment. Two particular films (with x=0.39 and 0.24) demonstrated behaviour which is promising for application in hydrogen gas sensing. Using the Co(39)Pd(61) alloy thin film, we were able to measure hydrogen gas concentration in a very broad range (from <0.1% to 100%) at a fixed value of the external magnetic field. Finally, we demonstrate that the Co(24)Pd(76) alloy thin film is sensitive to ultra-low hydrogen gas concentrations - from 10 to 10000 ppm.

cond-mat.mtrl-sci↗

arXiv2017

Microwave to optical photon conversion by means of travelling-wave magnons in YIG films

In this work we study theoretically the efficiency of a travelling magnon based microwave to optical photon converter for applications in Quantum Information (QI). The converter employs an epitaxially grown yttrium iron garnet (YIG) film as the medium for propagation of travelling magnons (spin waves). The conversion is achieved through coupling of magnons to guided optical modes of the film. The total microwave to optical photon conversion efficiency is found to be larger than in a similar process employing a YIG sphere by at least 4 orders of magnitude. By creating an optical resonator of a large length from the film (such that the traveling magnon decays before forming a standing wave over the resonator length) one will be able to further increase the efficiency by several orders of magnitude, potentially reaching a value similar to achieved with opto-mechanical resonators. Also, as a spin-off result, it is shown that isolation of more that 20 dB with direct insertion losses about 5 dBm can be achieved with YIG film based microwave isolators for applications in Quantum Information. An important advantage of the suggested concept of the QI devices based on travelling spin waves is a perfectly planar geometry and a possibility of implementing a the device as a hybrid opto-microwave chip.

cond-mat.mes-hall↗

arXiv2017

Strong Coupling of 3D Cavity Photons to Travelling Magnons At Low Temperatures

We demonstrate strong coupling between travelling magnons in an Yttrium Iron Garnet film and 3D microwave cavity photons at milli-Kelvin temperatures. The coupling strength of $350$MHz or $7.3$\% of resonance frequency is observed. The magnonic subsystem is represented by the Damon-Eshbach magnetostatic surface wave with a distribution of wave numbers giving the linewidth of 15MHz. The ways to improve this parameter are discussed. The energy gap in the spectrum given by the Zeeman energy and the shape-anisotropy energy in the film geometry give rise to a significant asymmetry of the double peak structure of the photon-magnon avoided level crossing. A structure of two parallel YIG films is investigated using the same re-entrant magnetostatic surface wave transducer revealing a higher order magnon modes existing in both films. Combination of a multi-post re-entrant cavity and multiple films is a potential base for engineering both magnon and photon spectra.

cond-mat.mtrl-sci↗