arXiv subjects

Milton S. Torikachvili

Publications and source records attributed to Milton S. Torikachvili.

7 recordsLinked to original sources

arXiv2024

Role of filler lanthanide ions on lattice dynamics of phosphide skutterudites RFe$_4$P$_{12}$ (R = La, Ce, and Pr) from first principles

Phosphide skutterudites primarily show promise for thermoelectric applications due to their chemical stability at high temperatures and relatively low cost. Ion doping and band gap engineering have been used to enhance their typically poor thermoelectric performance, opening avenues for practical applications. Herein, we report a comparative lattice dynamics study on the impact of filler and temperature on the structural and vibrational properties of RFe$_4$P$_{12}$ (R = La, Ce, and Pr) skutterudites. Calculations are performed within the quasi-harmonic approximation, and the results are critically compared against experimental data and other \textit{ab initio} calculations. We found gaps between the heat-carrying acoustic and optical modes, a-o gaps, of approximately 4, -2, and 0.01\,cm$^{-1}$ for La, Ce, and Pr compounds, respectively. These results suggest a filler-induced reduction in the a-o gap is attributed to the softening of the optical modes instead of the conventionally considered upward shift of acoustic modes proposed in the \textit{rattling} scenario. The distinct softening of the optical modes is rationalized by the stiffening of chemical bonds between the filler and host lattice.

cond-mat.mtrl-sci↗

arXiv2022

Growth of Pure and Intercalated ZrTe2, TiTe2 and HfTe2 Dichalcogenide Single Crystals by Isothermal Chemical Vapor Transport

We report on a modified chemical vapor transport (CVT) methodology for the growth of pure and intercalated Zr, Ti, and Hf dichalcogenide single crystals, e.g. ZrTe2, Gd0.05ZrTe2, HfTe2, and Cu0.05TiTe2. While the most common method for CVT growth is carried out in quartz tubes subjected to a temperature gradient between the charge and the growth location, the growth using this isothermal-CVT (ICVT) method takes place isothermally in sealed quartz tubes placed horizontally in box furnaces, using iodine (I2) as the transport agent. The structure and composition of crystals were determined by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and induced coupling plasma (ICP). The crystals grown with this method can be large, and show excellent crystallinity and homogeneity. Their morphology is plate-like, and the larger dimensions can be as long as 15 mm.

cond-mat.mtrl-sci↗

arXiv2022

Evidence for multiband superconductivity and charge density waves in Ni-doped ZrTe$_2$

We carried out a comprehensive study of the electronic, magnetic, and thermodynamic properties of Ni-doped ZrTe$_2$. High quality Ni$_{0.04}$ZrTe$_{1.89}$ single crystals show a possible coexistence of charge density waves (CDW, T$_{CDW}\approx287$\,K) with superconductivity (T$_c\approx 4.1$\,K), which we report here for the first time. The temperature dependence of the lower (H$_{c_1}$) and upper (H$_{c_2}$) critical magnetic fields both deviate significantly from the behaviors expected in conventional single-gap s-wave superconductors. However, the behaviors of the normalized superfluid density $ρ_s(T)$ and H$_{c_2}(T)$ can be described well using a two-gap model for the Fermi surface, in a manner consistent with conventional multiband superconductivity. Electrical resistivity and specific heat measurements show clear anomalies centered near 287\,K consistent with a CDW phase transition. Additionally, electronic-structure calculations support the coexistence of electron-phonon multiband superconductivity and CDW order due to the compensated disconnected nature of the electron- and hole-pockets at the Fermi surface. Our electronic structure calculations also suggest that ZrTe$_2$ could reach a non-trivial topological type-II Dirac semimetallic state. These findings highlight that Ni-doped ZrTe2 can be uniquely important for probing the coexistence of superconducting and CDW ground states in an electronic system with non-trivial topology.

cond-mat.supr-con↗

arXiv2021

Possible multiband superconductivity in the quaternary carbide YRe2SiC

We report for the first time the occurrence of superconductivity in the quaternary silicide carbide YRe2SiC with Tc = 5.9 K. The emergence of superconductivity was confirmed by means of magnetic susceptibility, electrical resistivity, and heat capacity measurements. The presence of a well developed heat capacity feature at Tc confirms that superconductivity is a bulk phenomenon, while a second feature in the heat capacity near 0.5 Tc combined with the unusual temperature dependence of the upper critical field Hc2(T) indicate the presence of a multiband superconducting state. Additionally, the linear dependence of the lower critical field Hc1 with temperature resemble the behavior found in compounds with unconventional pairing symmetry. Band structure calculations reveal YRe2SiC could harbor a non-trivial topological state and that the low-energy states occupy multiple disconnected sheets at the Fermi surface, with different degrees of hybridization, nesting, and screening effects, therefore making unconventional multiband superconductivity plausible.

cond-mat.supr-con↗

arXiv2011

Physical properties of SrSn4 single crystals

We present detailed thermodynamic and transport measurements on single crystals of the recently discovered binary intermetallic superconductor, SrSn4. We find this material to be a slightly anisotropic three-dimensional, strongly-coupled, possibly multi-band, superconductor. Hydrostatic pressure causes a decrease in the superconducting transition temperature at the rate of -0.068 K/kbar. Band structure calculations are consistent with experimental data on Sommerfeld coefficient and upper superconducting critical field anisotropy and suggest complex, multi-sheet Fermi surface formed by four bands.

cond-mat.supr-con↗

arXiv2010

Experimental Setup for the Measurement of the Thermoelectric Power in Zero and Applied Magnetic Field

An experimental setup was developed for the measurement of the thermoelectric power (TEP, Seebeck coefficient) in the temperature range from 2 to 350 K and magnetic fields up to 140 kOe. The system was built to fit in a commercial cryostat and is versatile, accurate and automated; using two heaters and two thermometers increases the accuracy of the TEP measurement. High density data of temperature sweeps from 2 to 350 K can be acquired in under 16 hours and high density data of isothermal field sweeps from 0 to 140 kOe can be obtained in under 2 hours. Calibrations for the system have been performed on a platinum wire and Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8+δ}$ high $T_{c}$ superconductors. The measured TEP of phosphor-bronze (voltage lead wire) turns to be very small, where the absolute TEP value of phosphor-bronze wire is much less than 0.5 $μ$V/K below 80 K. For copper and platinum wires measured against to the phosphor-bronze wire, the agreement between measured results and the literature data is good. To demonstrate the applied magnetic field response of the system, we report measurements of the TEP on single crystal samples of LaAgSb$_{2}$ and CeAgSb$_{2}$ in fields up to 140 kOe.

physics.ins-det↗

arXiv2008

Pressure induced superconductivity in CaFe$_2$As$_2$

CaFe$_2$As$_2$ has been found to be exceptionally sensitive to the application of hydrostatic pressure and superconductivity has been found to exist in a narrow pressure region that appears to be at the interface between two different phase transitions. The pressure - temperature ($P - T$) phase diagram of CaFe$_2$As$_2$ reveals that this stoichiometric, highly ordered, compound can be easily tuned to reveal all the salient features associated with FeAs-based superconductivity without introducing any disorder. Whereas at ambient pressure CaFe$_2$As$_2$ does not superconduct for $T > 1.8$ K and manifests a first order structural phase transition near $T \approx 170$ K, the application of $\sim 5$ kbar hydrostatic pressure fully suppresses the resistive signature of the structural phase transition and instead superconductivity is detected for $T < 12$ K. For $P \ge 5.5$ kbar a different transition is detected, one associated with a clear reduction in resistivity and for $P > 8.6$ kbar superconductivity is no longer detected. This higher pressure transition temperature increases rapidly with increasing pressure, exceeding 300 K by $P \sim 17$ kbar. The low temperature, superconducting dome is centered around 5 kbar, extending down to 2.3 kbar and up to 8.6 kbar. This superconducting phase appears to exist when the low pressure transition is suppressed sufficiently, but before the high pressure transition has reduced the resistivity, and possibly the associated fluctuations, too dramatically.

cond-mat.supr-con↗