arXiv subjects

Min Qiu

Publications and source records attributed to Min Qiu.

At least 37 records · Page 2Linked to original sources

arXiv2025

Parallel Coding for Orthogonal Delay-Doppler Division Multiplexing

This paper proposes a novel parallel coding transmission strategy and an iterative detection and decoding receiver signal processing technique for orthogonal delay-Doppler division multiplexing (ODDM) modulation. Specifically, the proposed approach employs a parallel channel encoding (PCE) scheme that consists of multiple short-length codewords for each delay-Doppler multicarrier (DDMC) symbol. Building upon such a PCE transmission framework, we then introduce an iterative detection and decoding algorithm incorporating a successive decoding feedback (SDF) technique, which enables instant information exchange between the detector and decoder for each DDMC symbol. To characterize the error performance of the proposed scheme, we perform density evolution analysis considering the finite blocklength effects. Our analysis results, coupled with extensive simulations, demonstrate that the proposed PCE scheme with the SDF algorithm not only showcases a better overall performance but also requires much less decoding complexity to implement, compared to the conventional benchmark scheme that relies on a single long channel code for coding the entire ODDM frame.

cs.IT↗

arXiv2025

Orthogonal Delay-Doppler Division Multiplexing Modulation with Hierarchical Mode-Based Index Modulation

The orthogonal time frequency space with index modulation (OTFS-IM) offers flexible tradeoffs between spectral efficiency (SE) and bit error rate (BER) in doubly selective fading channels. While OTFS-IM schemes demonstrated such potential, a persistent challenge lies in the detection complexity. To address this problem, we propose the hierarchical mode-based index modulation (HMIM). HMIM introduces a novel approach to modulate information bits by IM patterns, significantly simplifying the complexity of maximum a posteriori (MAP) estimation with Gaussian noise. Further, we incorporate HMIM with the recently proposed orthogonal delay-Doppler division multiplexing (ODDM) modulation, namely ODDM-HMIM, to exploit the full diversity of the delay-Doppler (DD) channel. The BER performance of ODDM-HMIM is analyzed considering a maximum likelihood (ML) detector. Our numerical results reveal that, with the same SE, HMIM can outperform conventional IM in terms of both BER and computational complexity. In addition, we propose a successive interference cancellation-based minimum mean square error (SIC-MMSE) detector for ODDM-HMIM, which enables low-complexity detection with large frame sizes.

eess.SP↗

arXiv2024

Uplink Multiple Access with Heterogeneous Blocklength and Reliability Constraints: Discrete Signaling with Treating Interference as Noise

We consider the uplink multiple access of heterogeneous users, e.g., ultra-reliable low-latency communications (URLLC) and enhanced mobile broadband (eMBB) users. Each user has its own reliability requirement and blocklength constraint, and users transmitting longer blocks suffer from heterogeneous interference. On top of that, the decoding of URLLC messages cannot leverage successive interference cancellation (SIC) owing to the stringent latency requirements. This can significantly degrade the spectral efficiency of all URLLC users when the interference is strong. To overcome this issue, we propose a new multiple access scheme employing discrete signaling and treating interference as noise (TIN) decoding, i.e., without SIC. Specifically, to handle heterogeneous interference while maintaining the single-user encoding and decoding complexities, each user uses a single channel code and maps its coded bits onto sub-blocks of symbols, where the underlying constellations can be different. We demonstrate theoretically and numerically that the proposed scheme employing quadrature amplitude modulations and TIN decoding can perform very close to the benchmark scheme based on Gaussian signaling with perfect SIC decoding. Interestingly, we show that the proposed scheme does not need to use all the transmit power budget, but also can sometimes even outperform the benchmark scheme.

cs.IT↗

arXiv2024

Performance of orthogonal delay-doppler division multiplexing modulation with imperfect channel estimation

The orthogonal delay-Doppler division multiplexing (ODDM) modulation is a recently proposed multi-carrier modulation that features a realizable pulse orthogonal with respect to the delay-Doppler (DD) plane's fine resolutions. In this paper, we investigate the performance of ODDM systems with imperfect channel estimation considering three detectors, namely the message passing algorithm (MPA) detector, iterative maximum-ratio combining (MRC) detector, and successive interference cancellation with minimum mean square error (SIC-MMSE) detector. We derive the post-equalization signal-to-interference-plus-noise ratio (SINR) for MRC and SIC-MMSE and analyze their bit error rate (BER) performance. Based on this analysis, we propose the MRC with subtractive dither (MRC-SD) and soft SIC-MMSE initialized MRC (SSMI-MRC) detector to improve the BER of iterative MRC. Our results demonstrate that soft SIC-MMSE consistently outperforms the other detectors in BER performance under perfect and imperfect CSI. While MRC exhibits a BER floor above $10^{-5}$, MRC-SD effectively lowers the BER with a negligible increase in detection complexity. SSMI-MRC achieves better BER than hard SIC-MMSE with the same detection complexity order. Additionally, we show that MPA has an error floor and is sensitive to imperfect CSI.

eess.SP↗

arXiv2024

Ultra-Thin, Ultra-Light, Rainbow-Free AR Glasses Based on Single-Layer Full-Color SiC Diffrcative Waveguide

As information interaction technology advances, the efficiency, dimensionality, and user experience of information transmission have significantly improved. Communication has evolved from letters to telegraphs, markedly increasing transmission speed; from telephones to video calls, enhancing communication dimensions; and from smartphones to augmented reality (AR) displays, which provide increasingly immersive user experiences. Surface relief grating (SRG) diffractive waveguides have attracted considerable attention for their optimal balance between weight, size, optical performance, and mass production capabilities, positioning them as a leading solution for AR displays. However, as consumer expectations for higher display quality and better device integration rise, traditional high-refractive-index glass-based diffractive waveguides face limitations, including bulkiness, heavy weight, and conspicuous rainbow artifacts in full-color displays. To overcome these challenges, a novel solution: ultra-thin, lightweight silicon carbide (SiC) AR prescription glasses was proposed. This solution achieves full-color displays without rainbow artifacts, with total weight of just 2.685 g and thickness of only 0.55 mm. Moreover, these glasses are compatible with prescription Fresnel lenses and are well-suited for scalable mass production. This innovation provides a robust platform for the seamless integration of augmented reality into daily life, offering significant potential to enhance user interaction.

physics.optics↗

arXiv2024

Channel Coding Toward 6G: Technical Overview and Outlook

Channel coding plays a pivotal role in ensuring reliable communication over wireless channels. With the growing need for ultra-reliable communication in emerging wireless use cases, the significance of channel coding has amplified. Furthermore, minimizing decoding latency is crucial for critical-mission applications, while optimizing energy efficiency is paramount for mobile and the Internet of Things (IoT) communications. As the fifth generation (5G) of mobile communications is currently in operation and 5G-advanced is on the horizon, the objective of this paper is to assess prominent channel coding schemes in the context of recent advancements and the anticipated requirements for the sixth generation (6G). In this paper, after considering the potential impact of channel coding on key performance indicators (KPIs) of wireless networks, we review the evolution of mobile communication standards and the organizations involved in the standardization, from the first generation (1G) to the current 5G, highlighting the technologies integral to achieving targeted KPIs such as reliability, data rate, latency, energy efficiency, spectral efficiency, connection density, and traffic capacity. Following this, we delve into the anticipated requirements for potential use cases in 6G. The subsequent sections of the paper focus on a comprehensive review of three primary coding schemes utilized in past generations and their recent advancements: low-density parity-check (LDPC) codes, turbo codes (including convolutional codes), polar codes (alongside Reed-Muller codes). Additionally, we examine alternative coding schemes like Fountain codes and sparse regression codes. Our evaluation includes a comparative analysis of error correction performance and the performance of hardware implementation for these coding schemes, providing insights into their potential and suitability for the upcoming 6G era.

cs.IT↗

arXiv2024

Low Complexity Turbo SIC-MMSE Detection for Orthogonal Time Frequency Space Modulation

Recently, orthogonal time frequency space (OTFS) modulation has garnered considerable attention due to its robustness against doubly-selective wireless channels. In this paper, we propose a low-complexity iterative successive interference cancellation based minimum mean squared error (SIC-MMSE) detection algorithm for zero-padded OTFS (ZP-OTFS) modulation. In the proposed algorithm, signals are detected based on layers processed by multiple SIC-MMSE linear filters for each sub-channel, with interference on the targeted signal layer being successively canceled either by hard or soft information. To reduce the complexity of computing individual layer filter coefficients, we also propose a novel filter coefficients recycling approach in place of generating the exact form of MMSE filter weights. Moreover, we design a joint detection and decoding algorithm for ZP-OTFS to enhance error performance. Compared to the conventional SIC-MMSE detection, our proposed algorithms outperform other linear detectors, e.g., maximal ratio combining (MRC), for ZP-OTFS with up to 3 dB gain while maintaining comparable computation complexity.

cs.IT↗

arXiv2024

Multiple Access Techniques for Intelligent and Multi-Functional 6G: Tutorial, Survey, and Outlook

Multiple access (MA) is a crucial part of any wireless system and refers to techniques that make use of the resource dimensions to serve multiple users/devices/machines/services, ideally in the most efficient way. Given the needs of multi-functional wireless networks for integrated communications, sensing, localization, computing, coupled with the surge of machine learning / artificial intelligence (AI) in wireless networks, MA techniques are expected to experience a paradigm shift in 6G and beyond. In this paper, we provide a tutorial, survey and outlook of past, emerging and future MA techniques and pay a particular attention to how wireless network intelligence and multi-functionality will lead to a re-thinking of those techniques. The paper starts with an overview of orthogonal, physical layer multicasting, space domain, power domain, ratesplitting, code domain MAs, and other domains, and highlight the importance of researching universal multiple access to shrink instead of grow the knowledge tree of MA schemes by providing a unified understanding of MA schemes across all resource dimensions. It then jumps into rethinking MA schemes in the era of wireless network intelligence, covering AI for MA such as AI-empowered resource allocation, optimization, channel estimation, receiver designs, user behavior predictions, and MA for AI such as federated learning/edge intelligence and over the air computation. We then discuss MA for network multi-functionality and the interplay between MA and integrated sensing, localization, and communications. We finish with studying MA for emerging intelligent applications before presenting a roadmap toward 6G standardization. We also point out numerous directions that are promising for future research.

cs.IT↗

arXiv2023

Achieving Covert Communication With A Probabilistic Jamming Strategy

In this work, we consider a covert communication scenario, where a transmitter Alice communicates to a receiver Bob with the aid of a probabilistic and uninformed jammer against an adversary warden's detection. The transmission status and power of the jammer are random and follow some priori probabilities. We first analyze the warden's detection performance as a function of the jammer's transmission probability, transmit power distribution, and Alice's transmit power. We then maximize the covert throughput from Alice to Bob subject to a covertness constraint, by designing the covert communication strategies from three different perspectives: Alice's perspective, the jammer's perspective, and the global perspective. Our analysis reveals that the minimum jamming power should not always be zero in the probabilistic jamming strategy, which is different from that in the continuous jamming strategy presented in the literature. In addition, we prove that the minimum jamming power should be the same as Alice's covert transmit power, depending on the covertness and average jamming power constraints. Furthermore, our results show that the probabilistic jamming can outperform the continuous jamming in terms of achieving a higher covert throughput under the same covertness and average jamming power constraints.

eess.SP↗

arXiv2023

Coexistence of Heterogeneous Services in the Uplink with Discrete Signaling and Treating Interference as Noise

The problem of enabling the coexistence of heterogeneous services, e.g., different ultra-reliable low-latency communications (URLLC) services and/or enhanced mobile broadband (eMBB) services, in the uplink is studied. Each service has its own error probability and blocklength constraints and the longer transmission block suffers from heterogeneous interference. Due to the latency concern, the decoding of URLLC messages cannot leverage successive interference cancellation (SIC) and should always be performed before the decoding of eMBB messages. This can significantly degrade the achievable rates of URLLC users when the interference from other users is strong. To overcome this issue, we propose a new transmission scheme based on discrete signaling and treating interference as noise decoding, i.e., without SIC. Guided by the deterministic model, we provide a systematic way to construct discrete signaling for handling heterogeneous interference effectively. We demonstrate theoretically and numerically that the proposed scheme can perform close to the benchmark scheme based on capacity-achieving Gaussian signaling with the assumption of perfect SIC.

cs.IT↗

arXiv2023

Self-Connected Spatially Coupled LDPC Codes with Improved Termination

This paper investigates the design of self-connected spatially coupled low-density parity-check (SC-LDPC) codes. First, a termination method is proposed to reduce rate loss. Particularly, a single-side open SC-LDPC ensemble is introduced, which halves the rate loss of a conventional terminated SC-LDPC by reducing the number of check nodes. We further propose a self-connection method that allows reliable information to propagate from several directions to improve the decoding threshold. We demonstrate that the proposed ensembles not only achieve a better trade-off between rate loss and gap to capacity than several existing protograph SC-LDPC codes with short chain lengths but also exhibit threshold saturation behavior. Finite blocklength error performance is provided to exemplify the superiority of the proposed codes over conventional protograph SC-LDPC codes.

cs.IT↗

arXiv2023

A Non-topological Extension of Bending-immune Valley Topological Edge States

Breaking parity (P) symmetry in C$_6$ symmetric crystals is a common routine to implement a valley-topological phase. At an interface between two crystals of opposite valley phases, the so-called valley topological edge states emerge, and they have been proven useful for wave transport with robustness against 120$^\circ$ bending and a certain level of disorder. However, whether these attractive transport features are bound with the valley topology or due to topological-irrelevant mechanisms remains unclear. In this letter, we discuss this question by examining transport properties of photonic edge states with varied degrees of the P-breaking that tune the valley topology, and reveal that the edge states preserve their transport robustness insensitive to the topology even when the P-symmetry is recovered. Instead, a unique modal character of the edge states -- with localized momentum hotspots around high-symmetric $K$ ($K'$) points -- is recognized to play the key role, which only concerns the existence of the valleys in the bulk band structures, and has no special requirement on the topology. The "non-topological" notion of valley edge states is introduced to conceptualize this modal character, leading to a coherent understanding of bending immunity in a range of edge modes implemented in C$_3$ symmetric crystals -- such as valley topological edge states, topological edge states of 2D Zak phase, topological-trivial edge states and so on, and to new designs in general rhombic lattices -- with exemplified bending angle as large as 150$^\circ$.

physics.optics↗

arXiv2023

Photonic Integrated Neuro-Synaptic Core for Convolutional Spiking Neural Network

Neuromorphic photonic computing has emerged as a competitive computing paradigm to overcome the bottlenecks of the von-Neumann architecture. Linear weighting and nonlinear spiking activation are two fundamental functions of a photonic spiking neural network (PSNN). However, they are separately implemented with different photonic materials and devices, hindering the large-scale integration of PSNN. Here, we propose, fabricate and experimentally demonstrate a photonic neuro-synaptic chip enabling the simultaneous implementation of linear weighting and nonlinear spiking activation based on a distributed feedback (DFB) laser with a saturable absorber (DFB-SA). A prototypical system is experimentally constructed to demonstrate the parallel weighted function and nonlinear spike activation. Furthermore, a four-channel DFB-SA array is fabricated for realizing matrix convolution of a spiking convolutional neural network, achieving a recognition accuracy of 87% for the MNIST dataset. The fabricated neuro-synaptic chip offers a fundamental building block to construct the large-scale integrated PSNN chip.

physics.optics↗

arXiv2023

Downlink Transmission with Heterogeneous URLLC Services: Discrete Signaling With Single-User Decoding

The problem of designing downlink transmission schemes for supporting heterogeneous ultra-reliable low-latency communications (URLLC) and/or with other types of services is investigated. We consider the broadcast channel, where the base station sends superimposed signals to multiple users. Under heterogeneous blocklength constraints, strong users who are URLLC users cannot wait to receive the entire transmission frame and perform successive interference cancellation (SIC) due to stringent latency requirements, in contrast to the conventional infinite blocklength cases. Even if SIC is feasible, SIC may be imperfect under finite blocklength constraints. To cope with the heterogeneity in latency and reliability requirements, we propose a practical downlink transmission scheme with discrete signaling and single-user decoding (SUD), i.e., without SIC. We carefully design the discrete input distributions to enable efficient SUD by exploiting the structural interference. Furthermore, we derive the second-order achievable rate under heterogenous blocklength and error probability constraints and use it to guide the design of channel coding and modulations. It is shown that in terms of achievable rate under short blocklength, the proposed scheme with regular quadrature amplitude modulations and SUD can operate extremely close to the benchmark schemes that assume perfect SIC with Gaussian signaling.

cs.IT↗

arXiv2023

Nanomotion of micro-objects driven by light-induced elastic waves on solid interfaces

It has been recently reported that elastic waves induced by nanosecond light pulses can be used to drive nano-motion of micro-objects on frictional solid interfaces, a challenging task for traditional techniques using tiny optical force. In this technique, the main physical quantities/parameters involved are: temporal width and energy of light pulses, thermal heating and cooling time, friction force and elastic waves. Despite a few experimental observations based on micro-fiber systems, a microscopic theory, which reveals how these quantities collaboratively enable motion of the micro-objects and derives what the underlying manipulation principles emerge, is absent. In this article, a comprehensive theoretical analysis--centralized around the above listed physical quantities, and illuminated by a single-friction-point model in conjunction with numerical simulations--is established to pedagogically clarify the physics. Our results reveal the two essential factors in this technique: (1) the use of short light pulses for rapid thermal expansion overwhelming friction resistance and (2) the timescale asymmetry in thermal heating and cooling for accumulating a net sliding distance. Moreover, we examine the effects of spatially distributed friction beyond the single-friction-point consideration, and show "tug-of-war"-like friction stretching in the driving process. Given these insights, we positively predict that this elastic-wave-based manipulation principle could be directly translated to micro/nano-scale optical waveguides on optical chips, and propose a practical design. We wish that these results offer theoretical guidelines for ongoing efforts of optical manipulation on solid interfaces with light-induced elastic waves.

physics.optics↗

arXiv2023

Downlink Transmission under Heterogeneous Blocklength Constraints: Discrete Signaling with Single-User Decoding

In this paper, we consider the downlink broadcast channel under heterogenous blocklength constraints, where each user experiences different interference statistics across its received symbols. Different from the homogeneous blocklength case, the strong users with short blocklength transmitted symbol blocks usually cannot wait to receive the entire transmission frame and perform successive interference cancellation (SIC) owing to their stringent latency requirements. Even if SIC is feasible, it may not be perfect under finite blocklength constraints. To cope with the heterogeneity in latency and reliability requirements, we propose a practical downlink transmission scheme with discrete signaling and single-user decoding, i.e., without SIC. In addition, we derive the finite blocklength achievable rate and use it for guiding the design of channel coding and modulations. Both achievable rate and error probability simulation show that the proposed scheme can operate close to the benchmark scheme which assumes capacity-achieving signaling and perfect SIC.

cs.IT↗

arXiv2022

Plug-Play Plasmonic Metafibers for Ultrafast Fiber Lasers

Metafibers expand the functionalities of conventional optical fibers to unprecedented nanoscale light manipulations by integrating metasurfaces on the fiber tips, becoming an emerging light-coupling platform for both nanoscience and fiber optics communities. Mostly exploring the isolated bare fibers, current metafibers remain as proof-of-concept demonstrations due to a lack of standard interfaces with the universal fiber networks. Here, we develop new methodologies to fabricate well-defined plasmonic metasurfaces directly on the end facets of commercial single mode fiber jumpers using standard planar technologies and provide a first demonstration of their practical applications in the nonlinear optics regime. Featuring plug-play connections with fiber circuitry and arbitrary metasurfaces landscapes, the metafibers with tunable plasmonic resonances are implemented into fiber laser cavities, yielding all-fiber sub-picosecond (minimum 513 fs) soliton mode locked lasers at optical wavelengths of 1.5 micrometer and 2 micrometer, demonstrating their unusual polarimetric nonlinear transfer functions and superior saturation absorption responses. Novel insights into the physical mechanisms behind the saturable absorption of plasmonic metasurfaces are provided. The nanofabrication process flow is compatible with existing cleanroom technologies, offering metafibers an avenue to be a regular member of functionalized fiber components. The work paves the way towards next generation of ultrafast fiber lasers, optical frequency combs, optical neural networks and ultracompact "all-in-fibers" optical systems for sensing, imaging, communications, and many others.

physics.optics↗

arXiv2022

High-speed laser writing of structural colors for full-color inkless printing

It is a formidable challenge to simultaneously achieve wide gamut, high resolution, high-speed while low-cost manufacturability, long-term stability, and viewing-angle independence in structural colors for practical applications. The conventional nanofabrication techniques fail to match the requirement in low-cost, large-scale and flexible manufacturing. Processing by ultrashort lasers can achieve extremely high throughput while suffering from a narrow gamut of 15% sRGB or angle-dependent colors. Here, we demonstrate an all-in-one solution for ultrafast laser-produced structural colors on ultrathin hybrid films that comprise an absorbent TiAlN layer coating on a metallic TiN layer. Under pulsed laser irradiation, the absorption behaviors of the TiAlN-TiN hybrid films are tailored by photothermal-induced oxidation on the topmost TiAlN. The oxidized films exhibit double-resonance absorption, which is attributed to the non-trivial phase shifts both at the oxide-TiAlN interface, and at the TiAlN-TiN interface. By varying the accumulated laser fluence to modulate the oxidation depth, an unprecedented large gamut of 90% sRGB is obtained. Our highly reproducible printing technique manifests angle-insensitive colors the variation of Hue is <0.14pi when viewing angles changing from 6 to 60. The full-color printing speed reaches to 1.4 cm2/s and the highest printing resolution exceeds 25000 dpi. The durability of the laser-printed colors is confirmed by fastness examination, including salt fog, double-85, light bleaching, and adhesion tests. These features render our technique to be competitive for high-throughput industrial applications.

physics.optics↗