arXiv subjects

Ming Qi

Publications and source records attributed to Ming Qi.

At least 19 recordsLinked to original sources

arXiv2026

Heterogeneity-Adaptive Diffusion Schrodinger Bridge for PET-Guided Whole-Body MRI Translation

While whole-body multimodal medical imaging scanners have been increasingly recognized for more effective medical applications, the excessive long acquisition time in PET-MR scanning is a major obstacle in more efficient clinical practice. Deep learning-based MRI translation provides a potential solution to reduce scan duration. However, current models often focus on specific anatomical regions and face challenges for whole-body scans that consists of highly heterogeneous feature distributions mainly due to (1) different anatomical regions across whole-body, and (2) lesions or pathological tissues. This paper tackles the challenges through a novel Heterogeneity-Adaptive Diffusion Schrodinger Bridge (HA-DSB) framework. By explicitly modeling translation as stochastic transport between source and target distributions, HA-DSB incorporates region context embeddings derived from a vision-language model (VLM) to enable region-specific modeling. To enhance fidelity of the pathological tissue, lesion-aware metabolic prior from PET is integrated directly into the bridge dynamics through a dual-stage guidance mechanism. Specifically, a PET-guided noise modulation module adaptively scales spatial diffusion perturbations during the forward process, while PET features are leveraged during the reverse process to selectively amplify lesion-relevant structures via an attention mechanism. Experiments demonstrate the superiority of our method across different body regions in whole-body MRI translation and show improved translation quality in lesion areas under PET guidance. Our code is available at Github.

cs.CV↗

arXiv2026

Mountain Muography for China Jinping Underground Laboratory

The China Jinping Underground Laboratory (CJPL), located $\sim 2,400$~m beneath Jinping Mountain, is one of the world's deepest and largest ($\sim 300{,}000~\mathrm{m}^3$) underground facilities, hosting dark matter, nuclear astrophysics, and neutrino experiments. We report the first muon radiography (muography) conducted at this extraordinary depth. Cosmic muons detected by a one-ton prototype developed for the Jinping Neutrino Experiment were used to perform non-invasive subsurface density mapping over a 3~km lateral range. The 1.3~m diameter detector provides nearly isotropic acceptance and an angular resolution of $\sim 4.5^\circ$. By correlating the predicted surface muon flux distributions with the underground measurements, we reconstruct a directional opacity map that constrains the density structure of the overburden and shows excellent agreement with satellite-derived terrain models. This work demonstrates the feasibility of muography at extreme depths with kilometer-scale overburden and establishes a robust methodology for future geophysical applications and large-scale facilities, such as the full Jinping Neutrino Experiment. Based on this validated overburden model, we further predict the total muon fluxes for the eight experimental halls in CJPL-II, providing essential input for their physics programs.

hep-ex↗

arXiv2026

Radiation Resistance of Ge-doped Multi-Mode Fiber for Optical Links in Collider Experiments

The applications of optical links in collider experiments provide the advantage of high-speed data transmission with low mass fibers over distances of a few hundred meters. Ge-doped multi-mode fibers are evaluated for radiation tolerance in ionizing doses of Co-60 gamma rays. The Radiation-Induced Attenuation (RIA) varies significantly depending on doping substances and fabrication technologies. A type of telecom-grade fiber has demonstrated an RIA of 0.05 dB/m under a total ionizing dose of 300 kGy(SiO2). The dependence on dose rate is compared in the range between 5 Gy/hr and 1.4 kGy/hr, and the annealing recovery is observed after the Co-60 source is shielded. The temperature dependence is investigated across a range of -15 oC to room temperature. At cold temperatures, stagnant annealing leads to a substantially higher RIA during irradiation. The recovery of radiation-induced defects is typically within a few hours, resulting in similar RIA levels regardless of the dose rate and temperature during exposure. Ge-doped fibers of chosen fabrication methods are capable of enduring high ionizing doses for use in high-energy physics experiments.

hep-ex↗

arXiv2026

Measuring high-precision luminosity at the CEPC

Purpose: Luminosity measurement at the Circular Electron-Positron Collider (CEPC) is required to achieve 10^{-4} precision when operating at the center-of-mass energy of the Z-pole. Approximately 10^{12} Z-bosons will be collected to refine measurements of Standard Model processes. The design of the luminosity calorimeter (LumiCal) takes into account the geometry of the Machine-Detector-Interface (MDI) for detection of Bhabha events. The detector simulation with GEANT predicts measurements of scattered electrons, positrons, and radiation photons. Results: The luminosity measurement by counting Bhabha events depends on the accuracy of the lower acceptance angle ({\theta}_{acc}) at the detector's fiducial edge. The beam-pipe design incorporates lowmass windows of 1 mm thick beryllium (Be) layers to reduce multiple scattering effects. The LumiCal has pixelated silicon detectors with better than 5 um resolution and LYSO crystals segmented into 3x3 mm2, which enhances the capability for detecting radiative Bhabha events. To achieve a precision level of 10^{-4}, it is crucial to monitor the interaction point (IP) of colliding beams and the positions of detectors with the error on mean of better than 1 urad. Conclusion: The LumiCal measures Bhabha scattering events using Si-detectors and finely segmented LYSO arrays. Its design is optimized for detecting radiative photons that are separated from electrons by a sufficiently large opening angle. This measurement aims to detect higher order corrections to the Bhabha interaction. Emphasis is placed on steering the beams for IP distribution and survey monitoring of detector positions to achieve high-precision luminosity measurements.lation with GEANT predicts measurements of scattered electrons, positrons, and radiation photons.

hep-ex↗

arXiv2025

Radiation tolerance test and damage of single-crystal CVD Diamond sensor under high fluence particles

Single-crystal chemical vapor deposition (CVD) diamond is a promising material for radiation detectors operating in extreme environments, owing to its outstanding radiation hardness. As nuclear and high-energy physics applications demand particle detectors that withstand higher radiation fluences, understanding the damage thresholds and degradation mechanisms of diamond-based detectors is essential. In this study, single-crystal CVD diamond sensors were exposed to fast neutron irradiation at fluences up to $3.3\times10^{17}$ ${n/cm^2}$. Modules exhibited stable output confirming potential for application in future high-dose radiation environments. The dominant defects were identified as point defects including <100> self interstitials, vacancies, and lattice disorder. Macroscopic defects including nanocavities and cracks were observed with areal densities approaching $10^7$ $cm^{-2}$. The impact of 100 MeV proton irradiation on diamond detector response was quantified by extracting a damage constant of $k^{100 MeV}_{proton}=(1.452\pm0.006)\times10^{-18}cm^2/(p\cdot\mu m)$ from a linear carrier drift degradation model. The mean free path of carriers was found to exhibit saturation behavior beyond a fluence of $4\times10^{16}$ ${p/cm^2}$ under 100 MeV proton irradiation. Monte Carlo together with molecular dynamics simulations were performed to assess irradiation induced defect and its influence on carrier transport. By considering saturation effects and defect-interaction corrections, we develop an enhanced carrier-drift degradation model that accurately captures detector response under high-dose irradiation. Furthermore, the simulation framework was applied to evaluate damage induced by protons and pions on diamond at various energies, yielding results that show better agreement with experimental data than conventional NIEL based estimates.

physics.ins-det↗

arXiv2025

Investigating Production of TeV-scale Muons in Extensive Air Shower at 2400 Meters Underground

Deep underground experiments present a new avenue to probe the first interactions in extensive air showers or hadronic interactions in the extreme forward phase space. The China Jinping Underground Laboratory, characterized by a vertical rock overburden of 2,400~m, provides an exceptionally effective shield against cosmic muons with energies below 3~TeV. The surviving high-energy muons, produced in the first interactions of extensive air showers, open a unique observational window into primary cosmic rays from tens of TeV up to the PeV scale and beyond. This distinctive feature also enables detailed studies of charged hadron production in the earliest stages of shower development. Using 1,338.6 live days of data collected with a one-ton prototype detector for the Jinping Neutrino Experiment, we measured the underground muon flux originating from air showers. The results show discrepancies of about 40\% corresponding to significances of more than 2$\sigma$, relative to predictions from several leading hadronic interaction models. We interpret these findings from two complementary perspectives: (i) by adopting the expected cosmic-ray spectra, we constrain the modeling of the first hadronic interactions in air showers and provide novel insights into resolving the long-standing \textit{muon puzzle}; and (ii) by assuming specific hadronic interaction models, we infer the mass composition of cosmic rays, and our data favor a lighter component in the corresponding energy range. Our study demonstrates the potential of deep underground laboratories to provide new experimental insights into air shower physics and cosmic rays.

hep-ex↗

arXiv2025

Evaluation of PID Performance at CEPC and Optimization with Combined dN/dx and Time-of-Flight Data

Charged-hadron identification (PID) is a critical requirement for the physics program of the Circular Electron-Positron Collider (CEPC). The baseline detector relies on ionization measurements from a time projection chamber (TPC), which provides strong PID capability at low momenta but becomes less effective at higher momenta. In this work, we investigate an extended PID strategy that combines dN/dx information from the TPC with time-of-flight (ToF) measurements from a silicon-based outer tracker (OTK) and a timing-upgraded inner tracker (ITK) equipped with AC-LGAD sensors. A unified discriminant is constructed to exploit the complementary sensitivity of ionization and timing observables. The performance is evaluated using simulated $Z \to q\bar{q}$ events, focusing on kaon identification in the presence of dominant pion backgrounds. The combined configuration significantly improves both efficiency and purity over a broad kinematic range, extending PID capability to both sub-GeV and multi-GeV regions. These results highlight the impact of precision timing on tracking detectors and demonstrate a viable path to enhanced PID performance for future lepton colliders.

hep-ex↗

arXiv2025

Characteristics of Ge-doped Multi-Mode Fibers in Total Ionizing Dose

Purpose: The fiber optical links in 850 nm band with Ge-doped multi-mode (MM) fibers are well developed for data transmission at 10 Gbps and higher. The applications in nuclear environments require radiation resistance. The characteristics of Ge-doped MM fibers are investigated for Radiation Induced Attenuation (RIA) in Total Ionizing Dose (TID). Methods: Commercial samples of Ge-doped MM fibers were irradiated in Go-60 gamma rays at dose rates of 5 to 1.4k Gy(SiO2)/hr. The fiber samples were packaged in water tanks maintained at constant temperatures in the range of -15 to 45 degC. The optical power transmitted through the fibers were recorded in irradiation, and in annealing when the source was shielded. The measurements of RIA in time are analyzed for dose rate and temperature dependences. Results: Ge-doped fiber samples of OM2 to OM4 grades were investigated for attenuation of optical power in radiation ionizing dose. Depending on the fabrication technology, two of the fiber types show radiation resistance with the RIAs of 0.2 dB/m and 0.05 dB/m, respectively, for the TID of 300 kGy(SiO2). At low dose rate of 5 Gy/hr, the RIA increases steadily and the annealing of low density ionizing defects does not cause notable deviation. At 1.4 kGy/hr the accumulated defects result to twice higher RIA during irradiation, and is worsen to a factor three in cold temperature. However, once the source is shielded the recovery is effective in a few hours. Conclusion: The telecom products of 850 nm Ge-doped MM fibers provide high speed communication in distances of a few hundred meters. The industrial fabrication methods provide fibers that can endure radiation ionizing dose for applications in nuclear instrumentation.

physics.med-ph↗

arXiv2025

Imaging neutron radiation-induced defects in single-crystal chemical vapor deposition diamond at the atomic level

Diamond's exceptional properties make it highly suited for applications in challenging radiation environments. Understanding radiation-induced damage in diamond is crucial for enabling its practical applications and advancing materials science. However, direct imaging of radiation-induced crystal defects at the atomic scale remains rare due to diamond's compact lattice structure. Here, we report the atomic-level characterization of crystal defects induced by high-flux fast neutron radiation (up to $3 \times10^{17}$ n/$cm^2$) in single-crystal chemical vapor deposition diamonds. Through Raman spectroscopy, the phase transition from carbon $sp^3$ to $sp^2$ hybridization was identified, primarily associated with the formation of dumbbell-shaped interstitial defects. Using electron energy loss spectroscopy and aberration-corrected transmission electron microscopy, we observed a clustering trend in defect distribution, where $sp^2$ rich clusters manifested as dislocation structures with a density up to $10^{14}$ $cm^{-2}$. Lomer-Cottrell junctions were identified, offering a possible explanation for defect cluster formation. Radiation-induced point defects were found to be dispersed throughout the diamond lattice, highlighting the widespread nature of primary defect formation. Vacancy defects, along with $\langle 111 \rangle$ and $\langle 100 \rangle$ oriented dumbbell-shaped interstitial defects induced by high-dose neutron irradiation, were directly imaged, providing microscopic structural evidence that complements spectroscopic studies of point defects. Dynamical simulations combined with an adiabatic recombination-based damage model provided insights into the correlation between irradiation dose and resulting crystal damage. These findings advance our understanding of neutron-induced damage mechanisms in diamond and contribute to the development of radiation-resistant diamond materials.

cond-mat.mtrl-sci↗

arXiv2025

Beam test result and digitization of TaichuPix-3: A Monolithic Active Pixel Sensors for CEPC vertex detector

The Circular Electron-Positron Collider (CEPC), as the next-generation electron-positron collider, is tasked with advancing not only Higgs physics but also the discovery of new physics. Achieving these goals requires high-precision measurements of particles. Taichu seires, Monolithic Active Pixel Sensor (MAPS), a key component of the vertex detector for CEPC was designed to meet the CEPC's requirements. For the geometry of vertex detector is long barrel with no endcap, and current silicon lacks a complete digitization model, precise estimation of cluster size particularly causing by particle with large incident angle is needed. Testbeam results were conducted at the Beijing Synchrotron Radiation Facility (BSRF) to evaluate cluster size dependence on different incident angles and threshold settings. Experimental results confirmed that cluster size increases with incident angle. Simulations using the Allpix$^2$ framework replicated experimental trends at small angles but exhibited discrepancies at large angles, suggesting limitations in linear electric field assumptions and sensor thickness approximations. The results from both testbeam and simulations have provided insights into the performance of the TaichuPix chip at large incident angles, offering a crucial foundation for the establishment of a digital model and addressing the estimation of cluster size in the forward region of the long barrel. Furthermore, it offers valuable references for future iterations of TaichuPix, the development of digital models, and the simulation and estimation of the vertex detector's performance.

physics.ins-det↗

arXiv2024

Study of neutron production for 360 GeV cosmic muons

The China Jinping underground Laboratory (CJPL) is an excellent location for studying solar, terrestrial, and supernova neutrinos due to its 2400-meter vertical rock overburden. Its unparalleled depth gives an opportunity to investigate the cosmic-ray muons with exceptionally high average energy at $\sim360$ GeV. This paper details a study of muon-related backgrounds based on 1178 days of data collected by the 1-ton prototype neutrino detector used for the Jinping Neutrino Experiment (JNE) since 2017. The apparent effects for the leakage of muons' secondary particles due to detector's finite size on the measured neutron yield are first discussed in detail. The analysis of 493 cosmic-ray muon candidates and $13.6\pm5.7$ cosmogenic neutron candidates, along with a thorough evaluation of detection efficiency and uncertainties, gives a muon flux of $(3.56\pm0.16_{\mathrm{stat.}}\pm0.10_{\mathrm{syst.}})\times10^{-10}~\mathrm{cm}^{-2}\mathrm{s^{-1}}$ and a cosmogenic neutron yield of $(3.37\pm 1.41_{\mathrm{stat.}}\pm 0.31_{\mathrm{syst.}}) \times 10^{-4}~\mathrm{\mu}^{-1} \mathrm{g}^{-1} \mathrm{cm}^{2}$ in LAB-based liquid scintillator.

hep-ex↗

arXiv2024

Beam test of a baseline vertex detector prototype for CEPC

The Circular Electron Positron Collider (CEPC) has been proposed to enable more thorough and precise measurements of the properties of Higgs, W, and Z bosons, as well as to search for new physics. In response to the stringent performance requirements of the vertex detector for the CEPC, a baseline vertex detector prototype was tested and characterized for the first time using a 6 GeV electron beam at DESY II Test Beam Line 21. The baseline vertex detector prototype is designed with a cylindrical barrel structure that contains six double-sided detector modules (ladders). Each side of the ladder includes TaichuPix-3 sensors based on Monolithic Active Pixel Sensor (MAPS) technology, a flexible printed circuit, and a carbon fiber support structure. Additionally, the readout electronics and the Data Acquisition system were also examined during this beam test. The performance of the prototype was evaluated using an electron beam that passed through six ladders in a perpendicular direction. The offline data analysis indicates a spatial resolution of about 5 um, with detection efficiency exceeding 99 % and an impact parameter resolution of about 5.1 um. These promising results from this baseline vertex detector prototype mark a significant step toward realizing the optimal vertex detector for the CEPC.

physics.ins-det↗

arXiv2024

High precision proton beam monitor system concept design on CSNS based on SiC

A high precision beam monitor system based on silicon carbide PIN sensor is designed for China Spallation Neutron Source 1.6 GeV proton beam to monitor the proton beam fluence.The concept design of the beam monitor system is finished together with front-end electronics with silicon carbide PIN sensors, readout system and mechanical system.Several tests are performed to study the performance of each component of the system.The charge collection of the SiC PIN sensors after proton radiation is studied with 80 MeV proton beam for continuous running. Research on the performance of the front-end electronics and readout system is finished for better data acquisition.The uncertainty of proton beam fluence is below 1% in the beam monitor system.

physics.acc-ph↗

arXiv2023

Beam test of a 180 nm CMOS Pixel Sensor for the CEPC vertex detector

The proposed Circular Electron Positron Collider (CEPC) imposes new challenges for the vertex detector in terms of pixel size and material budget. A Monolithic Active Pixel Sensor (MAPS) prototype called TaichuPix, based on a column drain readout architecture, has been developed to address the need for high spatial resolution. In order to evaluate the performance of the TaichuPix-3 chips, a beam test was carried out at DESY II TB21 in December 2022. Meanwhile, the Data Acquisition (DAQ) for a muti-plane configuration was tested during the beam test. This work presents the characterization of the TaichuPix-3 chips with two different processes, including cluster size, spatial resolution, and detection efficiency. The analysis results indicate the spatial resolution better than 5 $\mu m$ and the detection efficiency exceeds 99.5 % for both TaichuPix-3 chips with the two different processes.

physics.ins-det↗

arXiv2023

Analysis of Light Attenuation Length Measurement of a High Quality Linear Alkylbenzene for the JUNO Experiment

Jiangmen Underground Neutrino Observatory (JUNO) is the next generation neutrino experiment which aims at neutrino mass hierarchy problem along with many other cutting-edge studies concerning neutrinos. Located 700m underground in Jiangmen China, JUNO's central detector is an acrylic sphere filled with 20kt liquid scintillator with linear alkylbenzene(LAB) as scintillator solvent. To ensure that an unprecedented energy resolution of $\sigma_E/E \leqslant 3\%$ can be reached, LAB used in JUNO must have excellent transparency at the wavelength ranging from 350nm to 450nm. In the past decade much effort has been devoted to the development of high transparency LAB based on the measurement of light attenuation length. Through a close cooperation with Jingling Petrochemical Corporation in Nanjing, transparency of LAB samples prepared for JUNO has been improved progressively. However, this improvement is also pushing our apparatus towards approaching its measuring limit, undermining the credibility of our measurement. In order to get a result accurate and precise, an apparatus upgrading and a more detailed error analysis is inevitable. In this article, we present an analysis of how apparatus upgrading helps with decreasing measuring errors, and we conducted measurements using the new apparatus on several samples. A detailed error analysis is followed to validate the results. We propose to apply statistical methods featuring Monte Carlo simulation to estimate systematic uncertainties. Deviations caused by fit models is also considered and the overall uncertainty is obtained by combining two independent measurements. We finally report the light attenuation length of a newly improved LAB sample to be $29.90\pm 0.95$m, which gives a new high of all the preceding samples we tested. This study may provide a strong evidence of JUNO's feasibility to reach its energy resolution.

physics.ins-det↗

arXiv2023

MUX64, an analogue 64-to-1 multiplexer ASIC for the ATLAS High Granularity Timing Detector

We present the design and the performance of MUX64, a 64-to-1 analogue multiplexer ASIC for the ATLAS High Granularity Timing Detector (HGTD). The MUX64 transmits one of its 64 inputs selected by six address lines for the voltages or temperatures being monitored to an lpGBT ADC channel. The prototype ASICs fabricated in TSMC 130 nm CMOS technology were prepared in wire-bonding and QFN88 packaging format. A total of 280 chips was examined for functionality and quality assurance. The accelerated aging test conducted at 85 degrees celsius shows negligible degradation over 16 days.

physics.ins-det↗

arXiv2022

Performance of the 1-ton Prototype Neutrino Detector at CJPL-I

China Jinping Underground Laboratory provides an ideal site for solar, geo-, and supernova neutrino studies. With a prototype neutrino detector running since 2017, containing 1-ton liquid scintillator, we tested its experimental hardware, performed the detector calibration and simulation, and measured its radioactive backgrounds, as an early stage of the Jinping Neutrino Experiment (JNE). We investigated the radon background and implemented the nitrogen sealing technology to control it. This paper presents the details of these studies and will serve as a key reference for the construction and optimization of the future large detector of JNE.

hep-ex↗

arXiv2022

Optical property measurements of lithium chloride aqueous solution for a novel solar neutrino experiment

The lithium chloride aqueous solution has great potential to be the detection medium of a novel solar neutrino detector. The nuclide \ce{^7 Li} provides a charged-current interaction channel with a high cross-section for the MeV-scale solar electron-neutrinos, enabling measurement of the solar neutrino spectrum. This work measures the optical properties and the light yields of a saturated lithium chloride solution. After adsorption with activated carbon and recrystallization, the solution shows little absorption in the sensitive wavelength range of the bialkali photomultipliers. The attenuation length is evaluated to reach 50 meters at 430 nm. In addition to being a pure Cherenkov detector medium, a wavelength shifter, carbostyril 124, is added to the LiCl aqueous solution. The compatibility and the enhancement of the light yield are confirmed, enabling the development of a water-based Cherenkov-enhanced lithium-rich detector.

physics.ins-det↗