arXiv subjects

Ming Tang

Publications and source records attributed to Ming Tang.

At least 181 records · Page 10Linked to original sources

arXiv2020

Improving the spatial resolution of a BOTDA sensor using deconvolution algorithm

Spatial resolution improvement from an acquired measurement using long pulse is developed for Brillouin optical time domain analysis (BOTDA) systems based on the total variation deconvolution algorithm. The frequency dependency of Brillouin gain temporal envelope is investigated by simulation, and its impact on the recovered results of deconvolution algorithm is thoroughly analyzed. To implement a reliable deconvolution process, differential pulse-width pair (DPP) technique is utilized to effectively eliminate the systematic BFS distortion stemming from the frequency dependency of temporal envelope. The width of the pulse pairs should be larger than 40 ns as is analyzed theoretically and verified experimentally. It has been demonstrated that the proposed method can realize flexible adjustment of spatial resolution with enhanced signal-to-noise ratio (SNR) from an established measurement with long pump pulse. In the experiment, the spatial resolution is increased to 0.5 m and 1 m with high measurement accuracy by using the deconvolution algorithm from the measurement of 60/40 ns DPP signals. Compared with the raw DPP results with the same spatial resolution, 9.2 dB and 8.4 dB SNR improvements are obtained for 0.5 m and 1 m spatial resolution respectively, thanks to the denoising capability of the total variation deconvolution algorithm. The impact of sampling rate on the recovery results is also studied. The proposed sensing system allows for distortion-free Brillouin distributed sensing with higher spatial resolution and enhanced SNR from the conventional DPP setup with long pulse pairs.

eess.SP↗

arXiv2020

Learning Feature Embeddings for Discriminant Model based Tracking

After observing that the features used in most online discriminatively trained trackers are not optimal, in this paper, we propose a novel and effective architecture to learn optimal feature embeddings for online discriminative tracking. Our method, called DCFST, integrates the solver of a discriminant model that is differentiable and has a closed-form solution into convolutional neural networks. Then, the resulting network can be trained in an end-to-end way, obtaining optimal feature embeddings for the discriminant model-based tracker. As an instance, we apply the popular ridge regression model in this work to demonstrate the power of DCFST. Extensive experiments on six public benchmarks, OTB2015, NFS, GOT10k, TrackingNet, VOT2018, and VOT2019, show that our approach is efficient and generalizes well to class-agnostic target objects in online tracking, thus achieves state-of-the-art accuracy, while running beyond the real-time speed. Code will be made available.

cs.CV↗

arXiv2020

Self-Supervised Learning and Prediction of Microstructure Evolution with Recurrent Neural Networks

Microstructural evolution is a key aspect of understanding and exploiting the structure-property-performance relation of materials. Modeling microstructure evolution usually relies on coarse-grained simulations with evolution principles described by partial differential equations (PDEs). Here we demonstrate that convolutional recurrent neural networks can learn the underlying physical rules and replace PDE-based simulations in the prediction of microstructure phenomena. Neural nets are trained by self-supervised learning with image sequences from simulations of several common processes, including plane wave propagation, grain growth, spinodal decomposition and dendritic crystal growth. The trained networks can accurately predict both short-term local dynamics and long-term statistical properties of microstructures and is capable of extrapolating beyond the training datasets in spatiotemporal domains and configurational and parametric spaces. Such a data-driven approach offers significant advantages over PDE-based simulations in time stepping efficiency and offers a useful alternative especially when the material parameters or governing PDEs are not well determined.

cond-mat.mtrl-sci↗

arXiv2020

Identity-Guided Human Semantic Parsing for Person Re-Identification

Existing alignment-based methods have to employ the pretrained human parsing models to achieve the pixel-level alignment, and cannot identify the personal belongings (e.g., backpacks and reticule) which are crucial to person re-ID. In this paper, we propose the identity-guided human semantic parsing approach (ISP) to locate both the human body parts and personal belongings at pixel-level for aligned person re-ID only with person identity labels. We design the cascaded clustering on feature maps to generate the pseudo-labels of human parts. Specifically, for the pixels of all images of a person, we first group them to foreground or background and then group the foreground pixels to human parts. The cluster assignments are subsequently used as pseudo-labels of human parts to supervise the part estimation and ISP iteratively learns the feature maps and groups them. Finally, local features of both human body parts and personal belongings are obtained according to the selflearned part estimation, and only features of visible parts are utilized for the retrieval. Extensive experiments on three widely used datasets validate the superiority of ISP over lots of state-of-the-art methods. Our code is available at https://github.com/CASIA-IVA-Lab/ISP-reID.

cs.CV↗

arXiv2020

Thermodynamic Origin of Reaction Non-Uniformity in Battery Porous Electrodes and its Mitigation

The development of non-uniform reaction current distribution within porous electrodes is a ubiquitous phenomenon during battery charging / discharging and frequently controls the rate performance of battery cells. Reaction inhomogeneity in porous electrodes is usually attributed to the kinetic limitation of mass transport within the electrolyte and/or solid electrode phase. In this work, however, we reveal that it is also strongly influenced by the intrinsic thermodynamic behavior of electrode materials, specifically the dependence of the equilibrium potential on the state of charge: electrode reaction becomes increasingly non-uniform when the slope of the equilibrium potential curve is reduced. We employ numerical simulation and equivalent circuit model to elucidate such a correlation and show that the degree of reaction inhomogeneity and the resultant discharge capacity can be predicted by a dimensionless reaction uniformity number. For electrode materials that have equilibrium potentials insensitive to the state of charge and exhibit significant reaction non-uniformity, we demonstrate several approaches to spatially homogenizing the reaction current inside porous electrodes, including matching the electronic and ionic resistances, introducing graded electronic conductivity and reducing the surface reaction kinetics.

physics.app-ph↗

arXiv2020

Non-Markovian recovery makes complex networks more resilient against large-scale failures

Non-Markovian spontaneous recovery processes with a time delay (memory) are ubiquitous in the real world. How does the non-Markovian characteristic affect failure propagation in complex networks? We consider failures due to internal causes at the nodal level and external failures due to an adverse environment, and develop a pair approximation analysis taking into account the two-node correlation. In general, a high failure stationary state can arise, corresponding to large-scale failures that can significantly compromise the functioning of the network. We uncover a striking phenomenon: memory associated with nodal recovery can counter-intuitively make the network more resilient against large-scale failures. In natural systems, the intrinsic non-Markovian characteristic of nodal recovery may thus be one reason for their resilience. In engineering design, incorporating certain non-Markovian features into the network may be beneficial to equipping it with a strong resilient capability to resist catastrophic failures.

physics.soc-ph↗

arXiv2020

A Quantitative Analytical Model for Predicting and Optimizing the Rate Performance of Battery Cells

An important objective of designing lithium-ion rechargeable battery cells is to maximize their rate performance without compromising the energy density, which is mainly achieved through computationally expensive numerical simulations at present. Here we present a simple analytical model for predicting the rate performance of battery cells limited by electrolyte transport without any fitting parameters. It exhibits very good agreement with simulations over a wide range of discharge rate and electrode thickness and offers a speedup of >10$^5$ times. The optimal electrode properties predicted by the model are of less than 10% difference from simulation results, suggesting it as an attractive computational tool for the cell-level battery architecture design. The model also offers important insights on practical ways to improve the rate performance of thick electrodes, including avoiding electrode materials such as LiFePO$_4$ and Li$_4$Ti$_5$O$_{12}$ whose open-circuit potentials are insensitive to the state of charge and utilizing lithium metal anode to synergistically accelerate electrolyte transport within thick cathodes.

cond-mat.mtrl-sci↗

arXiv2020

Stress-Induced Intercalation Instability

We present a linear stability analysis to demonstrate that a flat coherent phase boundary formed by the (de)intercalation of solutes into a compound is unstable against perturbations with wavelengths larger than a critical wavelength. This critical wavelength is controlled by the competition between the interface energy and the elastic strain energy caused by the misfit between the solute-rich and solute-poor phases. It increases with the distance between the phase boundary and free surface of the compound, and so the instability is most pronounced when the boundary is close to the surface at the early stage of the (de)intercalation process. Numerical calculations show that such instability leads to non-uniform intercalation behavior. We find that uniform intercalation cannot be achieved unless the phase boundary moves at a speed greater than a critical velocity. Estimate of the magnitude of this velocity suggests that the stress-induced intercalation instability is generally operative in intercalation compounds used for battery applications.

cond-mat.mtrl-sci↗

arXiv2020

Deep Reinforcement Learning for Task Offloading in Mobile Edge Computing Systems

In mobile edge computing systems, an edge node may have a high load when a large number of mobile devices offload their tasks to it. Those offloaded tasks may experience large processing delay or even be dropped when their deadlines expire. Due to the uncertain load dynamics at the edge nodes, it is challenging for each device to determine its offloading decision (i.e., whether to offload or not, and which edge node it should offload its task to) in a decentralized manner. In this work, we consider non-divisible and delay-sensitive tasks as well as edge load dynamics, and formulate a task offloading problem to minimize the expected long-term cost. We propose a model-free deep reinforcement learning-based distributed algorithm, where each device can determine its offloading decision without knowing the task models and offloading decision of other devices. To improve the estimation of the long-term cost in the algorithm, we incorporate the long short-term memory (LSTM), dueling deep Q-network (DQN), and double-DQN techniques. Simulation results with 50 mobile devices and five edge nodes show that the proposed algorithm can reduce the ratio of dropped tasks and average task delay by 86.4%-95.4% and 18.0%-30.1%, respectively, when compared with several existing algorithms.

cs.NI↗

arXiv2020

Online Bitrate Selection for Viewport Adaptive 360-Degree Video Streaming

360-degree video streaming provides users with immersive experience by letting users determine their field-of-views (FoVs) in real time. To enhance the users' quality of experience (QoE) given their limited bandwidth, recent works have proposed a viewport adaptive 360-degree video streaming model by exploiting the bitrate adaptation in spatial and temporal domains. Under this video streaming model, in this paper, we consider a scenario with a newly generated 360-degree video without viewing history from other users. To maximize the user's QoE, we propose an online bitrate selection algorithm, called OBS360. The proposed online algorithm can adapt to the unknown and heterogeneous users' FoVs and downloading capacities. We prove that the proposed algorithm achieves sublinear dynamic regret under a convex decision set. This suggests that as the number of video segments increases, the performance of the online algorithm approaches the performance of the offline algorithm, where the users' FoVs and downloading capacities are known. We perform simulations with real-world dataset to evaluate the performance of the proposed algorithm. Results show that compared with several existing methods, our proposed algorithm can enhance the users' QoE significantly by improving the viewing bitrate and reducing the inter-segment and intra-segment degradation losses of the users.

cs.NI↗

arXiv2020

Quantitative assessment of the role of undocumented infection in the 2019 novel coronavirus (COVID-19) pandemic

An urgent problem in controlling COVID-19 spreading is to understand the role of undocumented infection. We develop a five-state model for COVID-19, taking into account the unique features of the novel coronavirus, with key parameters determined by the government reports and mathematical optimization. Tests using data from China, South Korea, Italy, and Iran indicate that the model is capable of generating accurate prediction of the daily accumulated number of confirmed cases and is entirely suitable for real-time prediction. The drastically disparate testing and diagnostic standards/policies among different countries lead to large variations in the estimated parameter values such as the duration of the outbreak, but such uncertainties have little effect on the occurrence time of the inflection point as predicted by the model, indicating its reliability and robustness. Model prediction for Italy suggests that insufficient government action leading to a large fraction of undocumented infection plays an important role in the abnormally high mortality in that country. With the data currently available from United Kingdom, our model predicts catastrophic epidemic scenarios in the country if the government did not impose strict travel and social distancing restrictions. A key finding is that, if the percentage of undocumented infection exceeds a threshold, a non-negligible hidden population can exist even after the the epidemic has been deemed over, implying the likelihood of future outbreaks should the currently imposed strict government actions be relaxed. This could make COVID-19 evolving into a long-term epidemic or a community disease a real possibility, suggesting the necessity to conduct universal testing and monitoring to identify the hidden individuals.

q-bio.PE↗

arXiv2020

Distributed Brillouin frequency shift extraction via a convolutional neural network

Distributed optical fiber Brillouin sensors detect the temperature and strain along a fiber according to the local Brillouin frequency shift, which is usually calculated by the measured Brillouin spectrum using Lorentzian curve fitting. In addition, cross-correlation, principal component analysis, and machine learning methods have been proposed for the more efficient extraction of Brillouin frequency shifts. However, existing methods only process the Brillouin spectrum individually, ignoring the correlation in the time domain, indicating that there is still room for improvement. Here, we propose and experimentally demonstrate a full convolution neural network to extract the distributed Brillouin frequency shift directly from the measured two-dimensional data. Simulated ideal Brillouin spectrum with various parameters are used to train the network. Both the simulation and experimental results show that the extraction accuracy of the network is better than that of the traditional curve fitting algorithm with a much shorter processing time. This network has good universality and robustness and can effectively improve the performances of existing Brillouin sensors.

eess.SP↗

arXiv2019

Period-doubling bifurcation of dissipative-soliton-resonance pulses in a passively mode-locked fiber laser

We report on the experimental observation of period-doubling bifurcation of dissipative-soliton-resonance (DSR) pulses in a fiber laser passively mode-locked by using the nonlinear optical loop mirror. Increasing the pump power of the fiber laser, we show that temporally a stable, uniform DSR pulse train could be transformed into a period-doubling state, exhibiting two sets of pulse parameters between the adjacent cavity roundtrip. It is found that DSR pulses in the period-doubling state could maintain the typical feature of DSR pulse: fixed pulse peak power and linear variation in pulse width with respect to the pump power change. The mechanism for achieving period-doubling of DSR pulses is discussed.

physics.optics↗

arXiv2019

Learning epidemic threshold in complex networks by Convolutional Neural Network

Deep learning has taken part in the competition since not long ago to learn and identify phase transitions in physical systems such as many body quantum systems, whose underlying lattice structures are generally regular as they're in euclidean space. Real networks have complex structural features which play a significant role in dynamics in them, and thus the structural and dynamical information of complex networks can not be directly learned by existing neural network models. Here we propose a novel and effective framework to learn the epidemic threshold in complex networks by combining the structural and dynamical information into the learning procedure. Considering the strong performance of learning in Euclidean space, Convolutional Neural Network (CNN) is used and, with the help of confusion scheme, we can identify precisely the outbreak threshold of epidemic dynamics. To represent the high dimensional network data set in Euclidean space for CNN, we reduce the dimensionality of a network by using graph representation learning algorithms and discretize the embedded space to convert it into an image-like structure. We then creatively merge the nodal dynamical states with the structural embedding by multi-channel images. In this manner, the proposed model can draw the conclusion from both structural and dynamical information. A large number of simulations show a great performance in both synthetic and empirical network data set. Our end-to-end machine learning framework is robust and universally applicable to complex networks with arbitrary size and topology.

physics.soc-ph↗

arXiv2019

Machine learning dynamical phase transitions in complex networks

In recent years, machine learning has been adopted to complex networks, but most existing works concern about the structural properties. To use machine learning to detect phase transitions and accurately identify the critical transition point associated with dynamical processes on complex networks thus stands out as an open and significant problem. Here we develop a framework combining supervised and unsupervised learning, incorporating proper sampling of training data set. In particular, using epidemic spreading dynamics on complex networks as a paradigmatic setting, we start from supervised learning alone and identify situations that degrade the performance. To overcome the difficulties leads to the idea of exploiting confusion scheme, effectively a combination of supervised and unsupervised learning. We demonstrate that the scheme performs well for identifying phase transitions associated with spreading dynamics on homogeneous networks, but the performance deteriorates for heterogeneous networks. To strive to meet this challenge leads to the realization that sampling the training data set is necessary for heterogeneous networks, and we test two sampling methods: one based on the hub nodes together with their neighbors and another based on k-core of the network. The end result is a general machine learning framework for detecting phase transition and accurately identifying the critical transition point, which is robust, computationally efficient, and universally applicable to complex networks of arbitrary size and topology. Extensive tests using synthetic and empirical networks verify the virtues of the articulated framework, opening the door to exploiting machine learning for understanding, detection, prediction, and control of complex dynamical systems in general.

physics.soc-ph↗

arXiv2019

Repositioning Bikes with Carrier Vehicles and Bike Trailers in Bike Sharing Systems

Bike Sharing Systems (BSSs) have been adopted in many major cities of the world due to traffic congestion and carbon emissions. Although there have been approaches to exploiting either bike trailers via crowdsourcing or carrier vehicles to reposition bikes in the ``right'' stations in the ``right'' time, they do not jointly consider the usage of both bike trailers and carrier vehicles. In this paper, we aim to take advantage of both bike trailers and carrier vehicles to reduce the loss of demand with regard to the crowdsourcing of bike trailers and the fuel cost of carrier vehicles. In the experiment, we exhibit that our approach outperforms baselines in several datasets from bike sharing companies.

cs.AI↗

arXiv2019

Semantic Alignment: Finding Semantically Consistent Ground-truth for Facial Landmark Detection

Recently, deep learning based facial landmark detection has achieved great success. Despite this, we notice that the semantic ambiguity greatly degrades the detection performance. Specifically, the semantic ambiguity means that some landmarks (e.g. those evenly distributed along the face contour) do not have clear and accurate definition, causing inconsistent annotations by annotators. Accordingly, these inconsistent annotations, which are usually provided by public databases, commonly work as the ground-truth to supervise network training, leading to the degraded accuracy. To our knowledge, little research has investigated this problem. In this paper, we propose a novel probabilistic model which introduces a latent variable, i.e. the 'real' ground-truth which is semantically consistent, to optimize. This framework couples two parts (1) training landmark detection CNN and (2) searching the 'real' ground-truth. These two parts are alternatively optimized: the searched 'real' ground-truth supervises the CNN training; and the trained CNN assists the searching of 'real' ground-truth. In addition, to recover the unconfidently predicted landmarks due to occlusion and low quality, we propose a global heatmap correction unit (GHCU) to correct outliers by considering the global face shape as a constraint. Extensive experiments on both image-based (300W and AFLW) and video-based (300-VW) databases demonstrate that our method effectively improves the landmark detection accuracy and achieves the state of the art performance.

cs.CV↗

arXiv2018

Social contagions with communication channels alternation on multiplex networks

Internet communication channels, e.g., Facebook, Twitter, and email, are multiplex networks that facilitate interaction and information-sharing among individuals. During brief time periods users often use a single communication channel, but then communication channel alteration (CCA) occurs. This means that we must refine our understanding of the dynamics of social contagions. We propose a non-Markovian behavior spreading model in multiplex networks that takes into account the CCA mechanism, and we develop a generalized edge-based compartmental method to describe the spreading dynamics. Through extensive numerical simulations and theoretical analyses we find that the time delays induced by CCA slow the behavior spreading but do not affect the final adoption size. We also find that the CCA suppresses behavior spreading. On two coupled random regular networks, the adoption size exhibits hybrid growth, i.e., it grows first continuously and then discontinuously with the information transmission probability. CCA in ER-SF multiplex networks in which two subnetworks are Erdős-Rényi (ER) and scale-free (SF) introduces a crossover from continuous to hybrid growth in adoption size versus information transmission probability. Our results extend our understanding of the role of CCA in spreading dynamics, and may elicit further research.

physics.soc-ph↗