arXiv subjects

Ming-Min Zhao

Publications and source records attributed to Ming-Min Zhao.

At least 37 records · Page 2Linked to original sources

arXiv2024

Joint Node Selection and Resource Allocation Optimization for Cooperative Sensing with a Shared Wireless Backhaul

In this paper, we consider a cooperative sensing framework in the context of future multi-functional network with both communication and sensing ability, where one base station (BS) serves as a sensing transmitter and several nearby BSs serve as sensing receivers. Each receiver receives the sensing signal reflected by the target and communicates with the fusion center (FC) through a wireless multiple access channel (MAC) for cooperative target localization. To improve the localization performance, we present a hybrid information-signal domain cooperative sensing (HISDCS) design, where each sensing receiver transmits both the estimated time delay/effective reflecting coefficient and the received sensing signal sampled around the estimated time delay to the FC. Then, we propose to minimize the number of channel uses by utilizing an efficient Karhunen-Loéve transformation (KLT) encoding scheme for signal quantization and proper node selection, under the Cramér-Rao lower bound (CRLB) constraint and the capacity limits of MAC. A novel matrix-inequality constrained successive convex approximation (MCSCA) algorithm is proposed to optimize the wireless backhaul resource allocation, together with a greedy strategy for node selection. Despite the high non-convexness of the considered problem, we prove that the proposed MCSCA algorithm is able to converge to the set of Karush-Kuhn-Tucker (KKT) solutions of a relaxed problem obtained by relaxing the discrete variables. Besides, a low-complexity quantization bit reallocation algorithm is designed, which does not perform explicit node selection, and is able to harvest most of the performance gain brought by HISDCS. Finally, numerical simulations are presented to show that the proposed HISDCS design is able to significantly outperform the baseline schemes.

cs.IT↗

arXiv2024

CSI Transfer From Sub-6G to mmWave: Reduced-Overhead Multi-User Hybrid Beamforming

Hybrid beamforming is vital in modern wireless systems, especially for massive MIMO and millimeter-wave (mmWave) deployments, offering efficient directional transmission with reduced hardware complexity. However, effective beamforming in multi-user scenarios relies heavily on accurate channel state information, the acquisition of which often requires significant pilot overhead, degrading system performance. To address this and inspired by the spatial congruence between sub-6GHz (sub-6G) and mmWave channels, we propose a Sub-6G information Aided Multi-User Hybrid Beamforming (SA-MUHBF) framework, avoiding excessive use of pilots at mmWave. SA-MUHBF employs a convolutional neural network to predict mmWave beamspace from sub-6G channel estimate, followed by a novel multi-layer graph neural network for analog beam selection and a linear minimum mean-square error algorithm for digital beamforming. Numerical results demonstrate that SA-MUHBF efficiently predicts the mmWave beamspace representation and achieves superior spectrum efficiency over state-of-the-art benchmarks. Moreover, SA-MUHBF demonstrates robust performance across varied sub-6G system configurations and exhibits strong generalization to unseen scenarios.

cs.IT↗

arXiv2024

Semi-Passive Intelligent Reflecting Surface Enabled Sensing Systems

Intelligent reflecting surface (IRS) has garnered growing interest and attention due to its potential for facilitating and supporting wireless communications and sensing. This paper studies a semi-passive IRS-enabled sensing system, where an IRS consists of both passive reflecting elements and active sensors. Our goal is to minimize the Cramér-Rao bound (CRB) for parameter estimation under both point and extended target cases. Towards this goal, we begin by deriving the CRB for the direction-of-arrival (DoA) estimation in closed-form and then theoretically analyze the IRS reflecting elements and sensors allocation design based on the CRB under the point target case with a single-antenna base station (BS). To efficiently solve the corresponding optimization problem for the case with a multi-antenna BS, we propose an efficient algorithm by jointly optimizing the IRS phase shifts and the BS beamformers. Under the extended target case, the CRB for the target response matrix (TRM) estimation is minimized via the optimization of the BS transmit beamformers. Moreover, we explore the influence of various system parameters on the CRB and compare these effects to those observed under the point target case. Simulation results show the effectiveness of the semi-passive IRS and our proposed beamforming design for improving the performance of the sensing system.

eess.SP↗

arXiv2023

Fast List Decoding of High-Rate Polar Codes

Due to the ability to provide superior error-correction performance, the successive cancellation list (SCL) algorithm is widely regarded as one of the most promising decoding algorithms for polar codes with short-to-moderate code lengths. However, the application of SCL decoding in low-latency communication scenarios is limited due to its sequential nature. To reduce the decoding latency, developing tailored fast and efficient list decoding algorithms of specific polar substituent codes (special nodes) is a promising solution. Recently, fast list decoding algorithms are proposed by considering special nodes with low code rates. Aiming to further speedup the SCL decoding, this paper presents fast list decoding algorithms for two types of high-rate special nodes, namely single-parity-check (SPC) nodes and sequence rate one or single-parity-check (SR1/SPC) nodes. In particular, we develop two classes of fast list decoding algorithms for these nodes, where the first class uses a sequential decoding procedure to yield decoding latency that is linear with the list size, and the second further parallelizes the decoding process by pre-determining the redundant candidate paths offline. Simulation results show that the proposed list decoding algorithms are able to achieve up to 70.7\% lower decoding latency than state-of-the-art fast SCL decoders, while exhibiting the same error-correction performance.

cs.IT↗

arXiv2023

Joint Location Sensing and Channel Estimation for IRS-Aided mmWave ISAC Systems

In this paper, we investigate a self-sensing intelligent reflecting surface (IRS) aided millimeter wave (mmWave) integrated sensing and communication (ISAC) system. Unlike the conventional purely passive IRS, the self-sensing IRS can effectively reduce the path loss of sensing-related links, thus rendering it advantageous in ISAC systems. Aiming to jointly sense the target/scatterer/user positions as well as estimate the sensing and communication (SAC) channels in the considered system, we propose a two-phase transmission scheme, where the coarse and refined sensing/channel estimation (CE) results are respectively obtained in the first phase (using scanning-based IRS reflection coefficients) and second phase (using optimized IRS reflection coefficients). For each phase, an angle-based sensing turbo variational Bayesian inference (AS-TVBI) algorithm, which combines the VBI, messaging passing and expectation-maximization (EM) methods, is developed to solve the considered joint location sensing and CE problem. The proposed algorithm effectively exploits the partial overlapping structured (POS) sparsity and 2-dimensional (2D) block sparsity inherent in the SAC channels to enhance the overall performance. Based on the estimation results from the first phase, we formulate a Cramér-Rao bound (CRB) minimization problem for optimizing IRS reflection coefficients, and through proper reformulations, a low-complexity manifold-based optimization algorithm is proposed to solve this problem. Simulation results are provided to verify the superiority of the proposed transmission scheme and associated algorithms.

eess.SP↗

arXiv2023

Intelligent Reflecting Surface Aided Multi-Tier Hybrid Computing

The digital twin edge network (DITEN) aims to integrate mobile edge computing (MEC) and digital twin (DT) to provide real-time system configuration and flexible resource allocation for the sixth-generation network. This paper investigates an intelligent reflecting surface (IRS)-aided multi-tier hybrid computing system that can achieve mutual benefits for DT and MEC in the DITEN. For the first time, this paper presents the opportunity to realize the network-wide convergence of DT and MEC. In the considered system, specifically, over-the-air computation (AirComp) is employed to monitor the status of the DT system, while MEC is performed with the assistance of DT to provide low-latency computing services. Besides, the IRS is utilized to enhance signal transmission and mitigate interference among heterogeneous nodes. We propose a framework for designing the hybrid computing system, aiming to maximize the sum computation rate under communication and computation resources constraints. To tackle the non-convex optimization problem, alternative optimization and successive convex approximation techniques are leveraged to decouple variables and then transform the problem into a more tractable form. Simulation results verify the effectiveness of the proposed algorithm and demonstrate the IRS can significantly improve the system performance with appropriate phase shift configurations. Moreover, the results indicate that the DT assisted MEC system can precisely achieve the balance between local computing and task offloading since real-time system status can be obtained with the help of DT.

eess.SP↗

arXiv2022

Secrecy Rate Maximization of RIS-assisted SWIPT Systems: A Two-Timescale Beamforming Design Approach

Reconfigurable intelligent surfaces (RISs) achieve high passive beamforming gains for signal enhancement or interference nulling by dynamically adjusting their reflection coefficients. Their employment is particularly appealing for improving both the wireless security and the efficiency of radio frequency (RF)-based wireless power transfer. Motivated by this, we conceive and investigate a RIS-assisted secure simultaneous wireless information and power transfer (SWIPT) system designed for information and power transfer from a base station (BS) to an information user (IU) and to multiple energy users (EUs), respectively. Moreover, the EUs are also potential eavesdroppers that may overhear the communication between the BS and IU. We adopt two-timescale transmission for reducing the signal processing complexity as well as channel training overhead, and aim for maximizing the average worst-case secrecy rate achieved by the IU. This is achieved by jointly optimizing the short-term transmit beamforming vectors at the BS as well as the long-term phase shifts at the RIS, under the energy harvesting constraints considered at the EUs and the power constraint at the BS. The stochastic optimization problem formulated is non-convex with intricately coupled variables, and is non-smooth due to the existence of multiple EUs/eavesdroppers. No standard optimization approach is available for this challenging scenario. To tackle this challenge, we propose a smooth approximation aided stochastic successive convex approximation (SA-SSCA) algorithm. Furthermore, a low-complexity heuristic algorithm is proposed for reducing the computational complexity without unduly eroding the performance. Simulation results show the efficiency of the RIS in securing SWIPT systems. The significant performance gains achieved by our proposed algorithms over the relevant benchmark schemes are also demonstrated.

cs.IT↗

arXiv2022

Fast Successive-Cancellation Decoding of Polar Codes with Sequence Nodes

Due to the sequential nature of the successive-cancellation (SC) algorithm, the decoding of polar codes suffers from significant decoding latencies. Fast SC decoding is able to speed up the SC decoding process, by implementing parallel decoders at the intermediate levels of the SC decoding tree for some special nodes with specific information and frozen bit patterns. To further improve the parallelism of SC decoding, this paper present a new class of special nodes composed of a sequence of rate one or single-parity-check (SR1/SPC) nodes, which can be easily found especially in high-rate polar code and is able to envelop a wide variety of existing special node types. Then, we analyse the parity constraints caused by the frozen bits in each descendant node, such that the decoding performance of the SR1/SPC node can be preserved once the parity constraints are satisfied. Finally, a generalized fast decoding algorithm is proposed to decode SR1/SPC nodes efficiently, where the corresponding parity constraints are taken into consideration. Simulation results show that the proposed decoding algorithm of the SR1/SPC node can achieve near-ML performance, and the overall decoding latency can be reduced by 43.8% as compared to the state-of-the-art fast SC decoder.

cs.IT↗

arXiv2022

Channel Tracking and Prediction for IRS-aided Wireless Communications

For intelligent reflecting surface (IRS)-aided wireless communications, channel estimation is essential and usually requires excessive channel training overhead when the number of IRS reflecting elements is large. The acquisition of accurate channel state information (CSI) becomes more challenging when the channel is not quasi-static due to the mobility of the transmitter and/or receiver. In this work, we study an IRS-aided wireless communication system with a time-varying channel model and propose an innovative two-stage transmission protocol. In the first stage, we send pilot symbols and track the direct/reflected channels based on the received signal, and then data signals are transmitted. In the second stage, instead of sending pilot symbols first, we directly predict the direct/reflected channels and all the time slots are used for data transmission. Based on the proposed transmission protocol, we propose a two-stage channel tracking and prediction (2SCTP) scheme to obtain the direct and reflected channels with low channel training overhead, which is achieved by exploiting the temporal correlation of the time-varying channels. Specifically, we first consider a special case where the IRS-access point (AP) channel is assumed to be static, for which a Kalman filter (KF)-based algorithm and a long short-term memory (LSTM)-based neural network are proposed for channel tracking and prediction, respectively. Then, for the more general case where the IRS-AP, user-IRS and user-AP channels are all assumed to be time-varying, we present a generalized KF (GKF)-based channel tracking algorithm, where proper approximations are employed to handle the underlying non-Gaussian random variables. Numerical simulations are provided to verify the effectiveness of our proposed transmission protocol and channel tracking/prediction algorithms as compared to existing ones.

eess.SP↗

arXiv2021

Two-timescale Beamforming Optimization for Intelligent Reflecting Surface Aided Multiuser Communication with QoS Constraints

Intelligent reflecting surface (IRS) is an emerging technology that is able to reconfigure the wireless channel via tunable passive signal reflection and thereby enhance the spectral and energy efficiency of wireless networks cost-effectively. In this paper, we study an IRS-aided multiuser multiple-input single-output (MISO) wireless system and adopt the two-timescale (TTS) transmission to reduce the signal processing complexity and channel training overhead as compared to the existing schemes based on the instantaneous channel state information (I-CSI), and at the same time, exploit the multiuser channel diversity in transmission scheduling. Specifically, the long-term passive beamforming is designed based on the statistical CSI (S-CSI) of all links, while the short-term active beamforming is designed to cater to the I-CSI of all users' reconfigured channels with optimized IRS phase shifts. We aim to minimize the average transmit power at the access point (AP), subject to the users' individual quality of service (QoS) constraints. The formulated stochastic optimization problem is non-convex and difficult to solve since the long-term and short-term design variables are complicatedly coupled in the QoS constraints. To tackle this problem, we propose an efficient algorithm, called the primal-dual decomposition based TTS joint active and passive beamforming (PDD-TJAPB), where the original problem is decomposed into a long-term problem and a family of short-term problems, and the deep unfolding technique is employed to extract gradient information from the short-term problems to construct a convex surrogate problem for the long-term problem. The proposed algorithm is proved to converge to a stationary solution of the original problem almost surely. Simulation results are presented which demonstrate the advantages and effectiveness of the proposed algorithm as compared to benchmark schemes.

cs.IT↗

arXiv2021

Exploiting Amplitude Control in Intelligent Reflecting Surface Aided Wireless Communication with Imperfect CSI

Intelligent reflecting surface (IRS) is a promising new paradigm to achieve high spectral and energy efficiency for future wireless networks by reconfiguring the wireless signal propagation via passive reflection. To reap the potential gains of IRS, channel state information (CSI) is essential, whereas channel estimation errors are inevitable in practice due to limited channel training resources. In this paper, in order to optimize the performance of IRS-aided multiuser systems with imperfect CSI, we propose to jointly design the active transmit precoding at the access point (AP) and passive reflection coefficients of IRS, each consisting of not only the conventional phase shift and also the newly exploited amplitude variation. First, the achievable rate of each user is derived assuming a practical IRS channel estimation method, which shows that the interference due to CSI errors is intricately related to the AP transmit precoders, the channel training power and the IRS reflection coefficients during both channel training and data transmission. Then, for the single-user case, by combining the benefits of the penalty method, Dinkelbach method and block successive upper-bound minimization (BSUM) method, a new penalized Dinkelbach-BSUM algorithm is proposed to optimize the IRS reflection coefficients for maximizing the achievable data transmission rate subjected to CSI errors; while for the multiuser case, a new penalty dual decomposition (PDD)-based algorithm is proposed to maximize the users' weighted sum-rate. Simulation results are presented to validate the effectiveness of our proposed algorithms as compared to benchmark schemes. In particular, useful insights are drawn to characterize the effect of IRS reflection amplitude control (with/without the conventional phase shift) on the system performance under imperfect CSI.

cs.IT↗

arXiv2021

Outage-Constrained Robust Beamforming for Intelligent Reflecting Surface Aided Wireless Communication

In intelligent reflecting surface (IRS) aided wireless communication systems, channel state information (CSI) is crucial to achieve its promising passive beamforming gains. However, CSI errors are inevitable in practice and generally correlated over the IRS reflecting elements due to the limited training with discrete phase shifts, which degrade the data transmission rate and reliability. In this paper, we focus on investigating the effect of CSI errors to the outage performance in an IRS-aided multiuser downlink communication system. Specifically, we aim to jointly optimize the active transmit precoding vectors at the access point (AP) and passive discrete phase shifts at the IRS to minimize the AP's transmit power, subject to the constraints on the maximum CSI-error induced outage probability for the users. First, we consider the single-user case and derive the user's outage probability in terms of the mean signal power (MSP) and variance of the received signal at the user. Since there is a trade-off in tuning these two parameters to minimize the outage probability, we propose to maximize their weighted sum with the optimal weight found by one-dimensional search. Then, for the general multiuser case, since the users' outage probabilities are difficult to obtain in closed-form due to the inter-user interference, we propose a novel constrained stochastic successive convex approximation (CSSCA) algorithm, which replaces the non-convex outage probability constraints with properly designed convex surrogate approximations. Simulation results verify the effectiveness of the proposed robust beamfoming algorithms and show their significant performance improvement over various benchmark schemes.

cs.IT↗

arXiv2021

Channel Estimation for IRS-aided Multiuser Communications with Reduced Error Propagation

Intelligent reflecting surface (IRS) has emerged as a promising paradigm to improve the capacity and reliability of a wireless communication system by smartly reconfiguring the wireless propagation environment. To achieve the promising gains of IRS, the acquisition of the channel state information (CSI) is essential, which however is practically difficult since the IRS does not employ any transmit/receive radio frequency (RF) chains in general and it has limited signal processing capability. In this paper, we study the uplink channel estimation problem for an IRS-aided multiuser single-input multi-output (SIMO) system, and propose a novel two-phase channel estimation (2PCE) strategy which can alleviate the negative effects caused by error propagation in the existing three-phase channel estimation approach, i.e., the channel estimation errors in previous phases will deteriorate the estimation performance in later phases, and enhance the channel estimation performance with the same amount of channel training overhead as in the existing approach. Moreover, the asymptotic mean squared error (MSE) of the 2PCE strategy is analyzed when the least-square (LS) channel estimation method is employed, and we show that the 2PCE strategy can outperform the existing approach. Finally, extensive simulation results are presented to validate the effectiveness of the 2PCE strategy.

eess.SP↗

arXiv2020

Intelligent Reflecting Surface Aided Full-Duplex Communication: Passive Beamforming and Deployment Design

This paper investigates the passive beamforming and deployment design for an intelligent reflecting surface (IRS) aided full-duplex (FD) wireless system, where an FD access point (AP) communicates with an uplink (UL) user and a downlink (DL) user simultaneously over the same time-frequency dimension with the help of IRS. Under this setup, we consider three deployment cases: 1) two distributed IRSs placed near the UL user and DL user, respectively; 2) one centralized IRS placed near the DL user; 3) one centralized IRS placed near the UL user. In each case, we aim to minimize the weighted sum transmit power consumption of the AP and UL user by jointly optimizing their transmit power and the passive reflection coefficients at the IRS (or IRSs), subject to the UL and DL users' rate constraints and the uni-modulus constraints on the IRS reflection coefficients. First, we analyze the minimum transmit power required in the IRS-aided FD system under each deployment scheme, and compare it with that of the corresponding half-duplex (HD) system. We show that the FD system outperforms its HD counterpart for all IRS deployment schemes, while the distributed deployment further outperforms the other two centralized deployment schemes. Next, we transform the challenging power minimization problem into an equivalent but more tractable form and propose an efficient algorithm to solve it based on the block coordinate descent (BCD) method. Finally, numerical results are presented to validate our analysis as well as the efficacy of the proposed passive beamforming design.

cs.IT↗

arXiv2020

Intelligent Reflecting Surface Enhanced Wireless Network: Two-timescale Beamforming Optimization

Intelligent reflecting surface (IRS) has drawn a lot of attention recently as a promising new solution to achieve high spectral and energy efficiency for future wireless networks. By utilizing massive low-cost passive reflecting elements, the wireless propagation environment becomes controllable and thus can be made favorable for improving the communication performance. Prior works on IRS mainly rely on the instantaneous channel state information (I-CSI), which, however, is practically difficult to obtain for IRS-associated links due to its passive operation and large number of elements. To overcome this difficulty, we propose in this paper a new two-timescale (TTS) transmission protocol to maximize the achievable average sum-rate for an IRS-aided multiuser system under the general correlated Rician channel model. Specifically, the passive IRS phase-shifts are first optimized based on the statistical CSI (S-CSI) of all links, which varies much slowly as compared to their I-CSI, while the transmit beamforming/precoding vectors at the access point (AP) are then designed to cater to the I-CSI of the users' effective channels with the optimized IRS phase-shifts, thus significantly reducing the channel training overhead and passive beamforming complexity over the existing schemes based on the I-CSI of all channels. For the single-user case, a novel penalty dual decomposition (PDD)-based algorithm is proposed, where the IRS phase-shifts are updated in parallel to reduce the computational time. For the multiuser case, we propose a general TTS optimization algorithm by constructing a quadratic surrogate of the objective function, which cannot be explicitly expressed in closed-form. Simulation results are presented to validate the effectiveness of our proposed algorithms and evaluate the impact of S-CSI and channel correlation on the system performance.

cs.IT↗

arXiv2020

Low-Complexity Joint Power Allocation and Trajectory Design for UAV-Enabled Secure Communications with Power Splitting

An unmanned aerial vehicle (UAV)-aided secure communication system is conceived and investigated, where the UAV transmits legitimate information to a ground user in the presence of an eavesdropper (Eve). To guarantee the security, the UAV employs a power splitting approach, where its transmit power can be divided into two parts for transmitting confidential messages and artificial noise (AN), respectively. We aim to maximize the average secrecy rate by jointly optimizing the UAV's trajectory, the transmit power levels and the corresponding power splitting ratios allocated to different time slots during the whole flight time, subject to both the maximum UAV speed constraint, the total mobility energy constraint, the total transmit power constraint, and other related constraints. To efficiently tackle this non-convex optimization problem, we propose an iterative algorithm by blending the benefits of the block coordinate descent (BCD) method, the concave-convex procedure (CCCP) and the alternating direction method of multipliers (ADMM). Specially, we show that the proposed algorithm exhibits very low computational complexity and each of its updating steps can be formulated in a nearly closed form. Our simulation results validate the efficiency of the proposed algorithm.

eess.SP↗

arXiv2020

A PDD Decoder for Binary Linear Codes With Neural Check Polytope Projection

Linear Programming (LP) is an important decoding technique for binary linear codes. However, the advantages of LP decoding, such as low error floor and strong theoretical guarantee, etc., come at the cost of high computational complexity and poor performance at the low signal-to-noise ratio (SNR) region. In this letter, we adopt the penalty dual decomposition (PDD) framework and propose a PDD algorithm to address the fundamental polytope based maximum likelihood (ML) decoding problem. Furthermore, we propose to integrate machine learning techniques into the most time-consuming part of the PDD decoding algorithm, i.e., check polytope projection (CPP). Inspired by the fact that a multi-layer perception (MLP) can theoretically approximate any nonlinear mapping function, we present a specially designed neural CPP (NCPP) algorithm to decrease the decoding latency. Simulation results demonstrate the effectiveness of the proposed algorithms.

eess.SP↗

arXiv2020

Learned Conjugate Gradient Descent Network for Massive MIMO Detection

In this work, we consider the use of model-driven deep learning techniques for massive multiple-input multiple-output (MIMO) detection. Compared with conventional MIMO systems, massive MIMO promises improved spectral efficiency, coverage and range. Unfortunately, these benefits are coming at the cost of significantly increased computational complexity. To reduce the complexity of signal detection and guarantee the performance, we present a learned conjugate gradient descent network (LcgNet), which is constructed by unfolding the iterative conjugate gradient descent (CG) detector. In the proposed network, instead of calculating the exact values of the scalar step-sizes, we explicitly learn their universal values. Also, we can enhance the proposed network by augmenting the dimensions of these step-sizes. Furthermore, in order to reduce the memory costs, a novel quantized LcgNet is proposed, where a low-resolution nonuniform quantizer is integrated into the LcgNet to smartly quantize the aforementioned step-sizes. The quantizer is based on a specially designed soft staircase function with learnable parameters to adjust its shape. Meanwhile, due to fact that the number of learnable parameters is limited, the proposed networks are easy and fast to train. Numerical results demonstrate that the proposed network can achieve promising performance with much lower complexity.

eess.SP↗