arXiv subjects

Mingliang Xiong

Publications and source records attributed to Mingliang Xiong.

30 records · Page 2Linked to original sources

arXiv2022

Optimization of A Mobile Optical SWIPT System With Asymmetric Spatially Separated Laser Resonator

High-power and high-rate simultaneous wireless information and power transfer (SWIPT) becomes more and more important with the development of Internet of Things technologies. Optical SWIPT, also known as simultaneous light information and power transfer (SLIPT), has unique advantages such as abundant spectrum resources and low propagation divergence, compared with radio-frequency (RF) SWIPT. However, optical SWIPT faces many challenges in beam steering and receiver positioning/tracking. Resonant beams generated by spatially separated laser resonators (SSLR) have many advantages, including high power, self-aligned mobility, and intrinsic safety. It has been proposed as the carrier of wireless charging and communication. Using resonant beams, mobile electronic devices can be remotely charged and supported with high-rate data transfer. In this paper, we propose a mobile optical SWIPT system based on asymmetric SSLR and present the system optimization procedure. We also determine the boundary of the charging power and communication rate, and discuss the trade-off between power transfer and information transfer. Numerical results show that both the charging power and the communication rate of the optimized asymmetric system are much higher than those of the symmetric system in the previous work.

eess.SP↗

arXiv2022

Time-Domain Analysis for Resonant Beam Charging and Communications With Delay-Divide Demodulation

Laser has unique advantages such as abundant spectrum resources and low propagation divergence in wireless charging and wireless communications, compared with radio frequency. Resonant beams, as a kind of intra-cavity laser beams, have been proposed as the carrier of wireless charging and communication, as it has unique features including high power, intrinsic safety, and self-aligned mobility. However, this system has problems such as intra-cavity echo interference and power fluctuation. To study the time-domain behavior of the resonant beam system, we create a simulation algorithm by discretizing the laser rate equations which model the dynamics of the excited atom density in the gain medium and the photon density in the cavity. The simulation results are in good agreement with theoretical calculation. We also propose a delay-divide demodulation method to address the echo interference issue, and use the simulation algorithm to verify its feasibility. The results show that the resonant beam charging and communication system with the proposed demodulator is feasible and performs well. The analysis in this work also helps researchers to deeply understand the behavior of the resonant beam system.

eess.SP↗

arXiv2021

Mobile Optical Communications Using Second Harmonic of Intra-Cavity Laser

Optical wireless communication (OWC) meets the demands of the future six-generation mobile network (6G) as it operates at several hundreds of Terahertz and has the potential to enable data rate in the order of Tbps. However, most beam steering OWC technologies require high-accuracy positioning and high-speed control. Resonant beam communication (RBCom), as one kind of non-positioning OWC technologies, has been proposed for high-rate mobile communications. The mobility of RBCom relies on its self-alignment characteristic where no positioning is required. In a previous study, an external-cavity second-harmonic-generation (SHG) RBCom system has been proposed for eliminating the echo interference inside the resonator. However, its energy conversion efficiency and complexity are of concern. In this paper, we propose an intra-cavity SHG RBCom system to simplify the system design and improve the energy conversion efficiency. We elaborate the system structure and establish an analytical model. Numerical results show that the energy consumption of the proposed intra-cavity design is reduced to reach the same level of channel capacity at the receiver compared with the external-cavity one.

eess.SP↗

arXiv2021

Transient Analysis for Resonant Beam Charging and Communication

High communication speed and sufficient energy supply are the directions of technological development. Energy and information available anywhere and anytime has always been people's good wishes. On this basis, resonant beam system (RBS) has demonstrated its unique superiority in meeting the needs for energy and communication. The previous work has mostly focused on the analysis of charging performance of RBS and its steady-state characteristics. In order to analyze the communication performance of RBS more thoroughly, we propose a resonant beam charging and communication (RBCC) system and use the equivalent circuit analysis method to conduct transient analysis on it. The equivalent circuit reveals the dynamic establishment process of the resonant beam from scratch, which facilitates the analysis of the relaxation oscillation process and a deeper understanding of the energy transmission and communication performance. In addition, we explore the energy transmission and communication performance of the RBCC under different energy allocation strategies.

cs.NI↗

arXiv2021

Resonant Beam Communications with Echo Interference Elimination

Resonant beam communications (RBCom) is capable of providing wide bandwidth when using light as the carrier. Besides, the RBCom system possesses the characteristics of mobility, high signal-to-noise ratio (SNR), and multiplexing. Nevertheless, the channel of the RBCom system is distinct from other light communication technologies due to the echo interference issue. In this paper, we reveal the mechanism of the echo interference and propose the method to eliminate the interference. Moreover, we present an exemplary design based on frequency shifting and optical filtering, along with its mathematic model and performance analysis. The numerical evaluation shows that the channel capacity is greater than 15 bit/s/Hz.

eess.SP↗

arXiv2021

Resonant Beam Communications: Principles and Designs

Wireless optical communications (WOC) has carriers up to several hundred terahertz, which offers several advantages, such as ultrawide bandwidth and no electromagnetic interference. Conventional WOC that uses light transmitters such as light emitting diodes (LEDs), directed LEDs, and lasers are facing major challenges in attenuation or tracking. Resonant beam communications (RBCom) meets the requirements of low attenuation, non-mechanical mobility, and multiple access. Yet, RBCom channel undergoes echo interference in contrast to common non-echo channels. An interference elimination method based on optical filtering is presented along with an exemplary interference-free RBCom system.

eess.SY↗

arXiv2021

Retro-Reflective Beam Communications with Spatially Separated Laser Resonator

Optical wireless communications (OWC) utilizing infrared or visible light as the carrier attracts great attention in 6G research. Resonant beam communications (RBCom) is an OWC technology which simultaneously satisfies the needs of non-mechanical mobility and high signal-to-noise ratio~(SNR). It has the self-alignment feature and therefore avoids positioning and pointing operations. However, RBCom undergoes echo interference. Here we propose an echo-interference-free RBCom system design based on second harmonic generation. The transmitter and the receiver constitute a spatially separated laser resonator, in which the retro-reflective resonant beam is formed and tracks the receiver automatically. This structure provides the channel with adaptive capability in beamforming and alignment, which is similar to the concept of intelligent reflecting surface (IRS) enhanced communications, but without hardware and software controllers. Besides, we establish an analytical model to evaluate the beam radius, the beam power, and the channel capacity. The results show that our system achieves longer distance and smaller beam diameter for the transmission beyond 10 Gbit/s, compared with the existing OWC technologies.

eess.SY↗

arXiv2021

Mobility-Enhanced Simultaneous Lightwave Information and Power Transfer

Simultaneous lightwave information and power transfer (SLIPT) has been regarded as a promising technology to deal with the ever-growing energy consumption and data-rate demands in the Internet of Things (IoT). We propose a resonant beam based SLIPT system (RB-SLIPT), which deals with the conflict of high deliverable power and mobile receiver positioning with the existing SLIPT schemes. At first, we establish a mobile transmission channel model and depict the energy distribution in the channel. Then, we present a practical design and evaluate the energy/data transfer performance within the moving range of the RB-SLIPT. Numerical evaluation demonstrates that the RB-SLIPT can deliver 5 W charging power and enable 1.5 Gbit/s achievable data rate with the moving range of 20-degree field of view (FOV) over 3 m distance. Thus, RB-SLIPT can simultaneously provide high-power energy and high-rate data transfer, and mobile receiver positioning capability.

eess.SP↗

arXiv2020

Wireless Power Transmitter Deployment for Balancing Fairness and Charging Service Quality

Wireless Energy Transfer (WET) has recently emerged as an appealing solution for power supplying mobile / Internet of Things (IoT) devices. As an enabling WET technology, Resonant Beam Charging (RBC) is well-documented for its long-range, high-power, and safe "WiFi-like" mobile power supply. To provide high-quality wireless charging services for multi-user in a given region, we formulate a deployment problem of multiple RBC transmitters for balancing the charging fairness and quality of charging service. Based on the RBC transmitter's coverage model and receiver's charging / discharging model, a Genetic Algorithm (GA)-based and a Particle Swarm Optimization (PSO)-based scheme are put forth to resolve the above issue. Moreover, we present a scheduling method to evaluate the performance of the proposed algorithms. Numerical results corroborate that the optimized deployment schemes outperform uniform and random deployment in 10%-20% charging efficiency improvement.

cs.ET↗

arXiv2020

Resonant Beam Communications with Photovoltaic Receiver for Optical Data and Power Transfer

The vision and requirements of the sixth generation (6G) mobile communication systems are expected to adopt freespace optical communication (FSO) and wireless power transfer (WPT). The laser-based WPT or wireless information transfer (WIT) usually faces the challenges of mobility and safety. We present a mobile and safe resonant beam communication (RBCom) system, which can realize high-rate simultaneous wireless information and power transfer (SWIPT). We propose an analytical model to depict its carrier beam and information transfer procedures. The numerical results show that RBCom can achieve more than 40 mW charging power and 1:6 Gbit/s channel capacity with orthogonal frequency division multiplexing (OFDM) scheme, which can be applied in future scenario where power and high-rate data are simultaneously desired.

eess.SP↗

arXiv2018

Adaptive Resonant Beam Charging for Intelligent Wireless Power Transfer

As a long-range high-power wireless power transfer (WPT) technology, resonant beam charging (RBC) can transmit Watt-level power over long distance for the devices in the internet of things (IoT). Due to its open-loop architecture, RBC faces the challenge of providing dynamic current and voltage to optimize battery charging performance. In RBC, battery overcharge may cause energy waste, thermal effects, and even safety issues. On the other hand, battery undercharge may lead to charging time extension and significant battery capacity reduction. In this paper, we present an adaptive resonant beam charging (ARBC) system for battery charging optimization. Based on RBC, ARBC uses a feedback system to control the supplied power dynamically according to the battery preferred charging values. Moreover, in order to transform the received current and voltage to match the battery preferred charging values, ARBC adopts a direct current to direct current (DC-DC) conversion circuit. Relying on the analytical models for RBC power transmission, we obtain the end-to-end power transfer relationship in the approximate linear closed-form of ARBC. Thus, the battery preferred charging power at the receiver can be mapped to the supplied power at the transmitter for feedback control. Numerical evaluation demonstrates that ARBC can save 61% battery charging energy and 53%-60% supplied energy compared with RBC. Furthermore, ARBC has high energy-saving gain over RBC when the WPT is unefficient. ARBC in WPT is similar to link adaption in wireless communications. Both of them play the important roles in their respective areas.

eess.SY↗

arXiv2018

TDMA in Adaptive Resonant Beam Charging for IoT Devices

Resonant beam charging (RBC) can realize wireless power transfer (WPT) from a transmitter to multiple receivers via resonant beams. The adaptive RBC (ARBC) can effectively improve its energy utilization. In order to support multi-user WPT in the ARBC system, we propose the time-division multiple access (TDMA) method and design the TDMA-based WPT scheduling algorithm. Our TDMA WPT method has the features of concurrently charging, continuous charging current, individual user power control, constant driving power and flexible driving power control. The simulation shows that the TDMA scheduling algorithm has high efficiency, as the total charging time is roughly half (46.9% when charging 50 receivers) of that of the alternative scheduling algorithm. Furthermore, the TDMA for WPT inspires the ideas of enhancing the ARBC system, such as flow control and quality of service (QoS).

eess.SP↗