arXiv subjects

Mingqing Liu

Publications and source records attributed to Mingqing Liu.

At least 37 records · Page 2Linked to original sources

arXiv2023

Mobile Power Network for Ultimate Mobility without Battery Life Anxiety

Similar to the evolution from the wired Internet to mobile Internet (MI), the growing demand for power delivery anywhere and anytime appeals for power grid transformation from wired to mobile domain. We propose here the next generation of power delivery network -- mobile power network (MPN) for wireless power transfer within a mobile range from several meters to tens of meters. At first, we present the MPN's concept evolution and application scenarios. Then, we introduce the MPN's supporting technology, namely resonant beam charging (RBC). As a long-range wireless power transfer (WPT) method, RBC can safely deliver multi-Watt power to multiple devices concurrently. Meanwhile, the recent progress in RBC research has been summarized. Next, we specify the MPN's architecture to provide the wide-area WPT coverage. Finally, we discuss the MPN's features and challenges. MPN can enable the ultimate mobility by cutting the final cord of mobile devices, realizing the "last-mile" mobile power delivery.

eess.SP↗

arXiv2022

Binocular Localization Using Resonant Beam

Locating mobile devices precisely in indoor scenarios is a challenging task because of the signal diffraction and reflection in complicated environments. One vital cause deteriorating the localization performance is the inevitable power dissipation along the propagation path of localization signals. In this paper, we propose a high-accuracy localization scheme based on the resonant beam system (RBS) and the binocular vision, i.e., binocular based resonant beam localization (BRBL). The BRBL system utilizes the energy-concentrated and self-aligned transmission of RBS to realize high-efficiency signal propagation and self-positioning for the target. The binocular method is combined with RBS to obtain the three-dimensional (3-D) coordinates of the target for the first time. To exhibit the localization mechanism, we first elaborate on the binocular localization model, including the resonant beam transmission analysis and the geometric derivation of the binocular method with RBS. Then, we establish the power model of RBS, and the signal and noise models of beam spot imaging, respectively, to analyse the performance of the BRBL system. Finally, the numerical results show an outstanding performance of centimeter level accuracy (i.e., $<5\mathrm{cm}$ in $0.4\mathrm{m}$ width and $0.4\mathrm{m}$ length effective range at $1\mathrm{m}$ vertical distance, $<13\mathrm{cm}$ in $0.6\mathrm{m}$ width and $0.6\mathrm{m}$ length effective range at $2\mathrm{m}$ vertical distance), which applies to indoor scenarios.

eess.SP↗

arXiv2022

NLOS Transmission Analysis for Mobile SLIPT Using Resonant Beam

Simultaneous lightwave information and power transfer (SLIPT) is a potential way to meet the demands of sustainable power supply and high-rate data transfer in next-generation networks. Although resonant beam-based SLIPT (RB-SLIPT) can realize high-power energy transfer, high-rate data transfer, human safety, and self-alignment simultaneously, mobile transmission channel (MTC) analysis under non-line-of-sight (NLOS) propagation has not been investigated. In this paper, we propose analytical models and simulation tools for reflector-assisted NLOS transmission of RB-SLIPT, where transmission loss and accurate beam field profile of NLOS MTC can be obtained with a receiver at arbitrary positions and attitude angles. We establish analytical models relying on full diffraction theory for beam propagation between tilted or off-axis planes. Then, we provide three numerical methods (i.e., NUFFT-based, cubic interpolation-based, and linear interpolation-based methods) in simulations. Moreover, to deal with the contradiction between limited computing memory and high sampling requirements for long-range transmission analysis, we propose a multi-hop sliding window approach, which can reduce the sampling number by a factor of thousands. Finally, numerical results demonstrate that RB-SLIPT can achieve $4$W charging power and $12$bit/s/Hz data rate over $2$m distance in NLOS scenarios.

physics.optics↗

arXiv2022

Performance of a High Power and Capacity Mobile SLIPT Scheme

The increasing demands of power supply and data rate for mobile devices promote the research of simultaneous wireless information and power transfer (SWIPT). Optical SWIPT, as known as simultaneous light information and power transfer (SLIPT), has the potential for providing high-capacity communication and high-power wireless charging. However, SLIPT technologies based on light-emitting diodes have low efficiency due to energy dissipation over the air. Laser-based SLIPT technologies need strict positioning accuracy and scanning resolution, which may lead to the increase of costs and complexity. In this paper, we propose a mobile SLIPT scheme based on spatially separated laser resonator (SSLR) and intra-cavity second harmonic generation. The power and data are transferred via separated frequencies, while they share the same self-aligned resonant beam path, without the needs of receiver positioning and beam steering. We establish the analysis model of the resonant beam power and its second harmonic power. Numerical results show that the proposed system can achieve watt-level battery charging power and above 10-bit/s/Hz achievable rate at 6-m distance, which satisfies the requirements of most indoor mobile devices.

eess.SP↗

arXiv2022

Charging A Smartphone Over the Air: The Resonant Beam Charging Method

Wireless charging for mobile Internet of Things (IoT) devices such as smartphones is extremely difficult. To reduce energy dissipation during wireless transmission in mobile scenarios, laser or narrow radio beams with sophisticated tracking control are typically required. However, reaching the necessary tracking accuracy and reliability is really difficult. In this paper, inspired by the features of optical resonators and retroreflectors, we develop an experiment on a self-aligned resonant beam charging system for long-distance mobile power transfer. It exploits light resonances inside a double-retroreflector-based spatially separated laser resonator (SSLR), which eliminates the requirement for any kind of tracking control. Focal telecentric cat's eye retroreflectors are employed here. The SSLR was investigated by both theoretical calculation and experiment. We also well assembled the transmitter and the receiver and demonstrated its application in mobile smartphone charging. The results show that above 5-W optical power (also obtained more than 0.6-W electrical power) transferring with negligible diffraction loss to a few-centimeter-size receiver is realized while the receiver moves arbitrarily within 2-m vertical distance and 6° field of view from the transmitter. The maximum horizontal moving range is up to 18cm. This wireless charging system empowers a smartphone in mobile operation with unlimited battery life without the need for a cable.

eess.SP↗

arXiv2021

Transient Analysis for Resonant Beam Charging and Communication

High communication speed and sufficient energy supply are the directions of technological development. Energy and information available anywhere and anytime has always been people's good wishes. On this basis, resonant beam system (RBS) has demonstrated its unique superiority in meeting the needs for energy and communication. The previous work has mostly focused on the analysis of charging performance of RBS and its steady-state characteristics. In order to analyze the communication performance of RBS more thoroughly, we propose a resonant beam charging and communication (RBCC) system and use the equivalent circuit analysis method to conduct transient analysis on it. The equivalent circuit reveals the dynamic establishment process of the resonant beam from scratch, which facilitates the analysis of the relaxation oscillation process and a deeper understanding of the energy transmission and communication performance. In addition, we explore the energy transmission and communication performance of the RBCC under different energy allocation strategies.

cs.NI↗

arXiv2021

Retro-Reflective Beam Communications with Spatially Separated Laser Resonator

Optical wireless communications (OWC) utilizing infrared or visible light as the carrier attracts great attention in 6G research. Resonant beam communications (RBCom) is an OWC technology which simultaneously satisfies the needs of non-mechanical mobility and high signal-to-noise ratio~(SNR). It has the self-alignment feature and therefore avoids positioning and pointing operations. However, RBCom undergoes echo interference. Here we propose an echo-interference-free RBCom system design based on second harmonic generation. The transmitter and the receiver constitute a spatially separated laser resonator, in which the retro-reflective resonant beam is formed and tracks the receiver automatically. This structure provides the channel with adaptive capability in beamforming and alignment, which is similar to the concept of intelligent reflecting surface (IRS) enhanced communications, but without hardware and software controllers. Besides, we establish an analytical model to evaluate the beam radius, the beam power, and the channel capacity. The results show that our system achieves longer distance and smaller beam diameter for the transmission beyond 10 Gbit/s, compared with the existing OWC technologies.

eess.SY↗

arXiv2021

End-to-End Transmission Analysis of Simultaneous Wireless Information and Power Transfer using Resonant Beam

Integrating the wireless power transfer (WPT) technology into the wireless communication system has been important for operational cost saving and power-hungry problem solving of electronic devices. In this paper, we propose a resonant beam simultaneous wireless information and power transfer (RB-SWIPT) system, which utilizes a gain medium and two retro-reflecting surfaces to enhance and retro-reflect energy, and allows devices to recharge their batteries and exchange information from the resonant beam wirelessly. To reveal the SWIPT mechanism and evaluate the SWIPT performance, we establish an analytical end-to-end (E2E) transmission model based on a modular approach and the electromagnetic field propagation. Then, the intra-cavity power intensity distribution, transmission loss, output power, and E2E efficiency can be obtained. The numerical evaluation illustrates that the exemplary RB-SWIPT system can provide about 4.20W electric power and 12.41bps/Hz spectral efficiency, and shorter transmission distance or larger retro-reflecting surface size can lead to higher E2E efficiency. The RB-SWIPT presents a new way for high-power, long-range WPT, and high-rate communication.

eess.SY↗

arXiv2021

Mobility-Enhanced Simultaneous Lightwave Information and Power Transfer

Simultaneous lightwave information and power transfer (SLIPT) has been regarded as a promising technology to deal with the ever-growing energy consumption and data-rate demands in the Internet of Things (IoT). We propose a resonant beam based SLIPT system (RB-SLIPT), which deals with the conflict of high deliverable power and mobile receiver positioning with the existing SLIPT schemes. At first, we establish a mobile transmission channel model and depict the energy distribution in the channel. Then, we present a practical design and evaluate the energy/data transfer performance within the moving range of the RB-SLIPT. Numerical evaluation demonstrates that the RB-SLIPT can deliver 5 W charging power and enable 1.5 Gbit/s achievable data rate with the moving range of 20-degree field of view (FOV) over 3 m distance. Thus, RB-SLIPT can simultaneously provide high-power energy and high-rate data transfer, and mobile receiver positioning capability.

eess.SP↗

arXiv2020

Lightweight Mask R-CNN for Long-Range Wireless Power Transfer Systems

Resonant Beam Charging (RBC) is a wireless charging technology which supports multi-watt power transfer over meter-level distance. The features of safety, mobility and simultaneous charging capability enable RBC to charge multiple mobile devices safely at the same time. To detect the devices that need to be charged, a Mask R-CNN based dection model is proposed in previous work. However, considering the constraints of the RBC system, it's not easy to apply Mask R-CNN in lightweight hardware-embedded devices because of its heavy model and huge computation. Thus, we propose a machine learning detection approach which provides a lighter and faster model based on traditional Mask R-CNN. The proposed approach makes the object detection much easier to be transplanted on mobile devices and reduce the burden of hardware computation. By adjusting the structure of the backbone and the head part of Mask R-CNN, we reduce the average detection time from $1.02\mbox{s}$ per image to $0.6132\mbox{s}$, and reduce the model size from $245\mbox{MB}$ to $47.1\mbox{MB}$. The improved model is much more suitable for the application in the RBC system.

cs.CV↗

arXiv2020

Wireless Power Transmitter Deployment for Balancing Fairness and Charging Service Quality

Wireless Energy Transfer (WET) has recently emerged as an appealing solution for power supplying mobile / Internet of Things (IoT) devices. As an enabling WET technology, Resonant Beam Charging (RBC) is well-documented for its long-range, high-power, and safe "WiFi-like" mobile power supply. To provide high-quality wireless charging services for multi-user in a given region, we formulate a deployment problem of multiple RBC transmitters for balancing the charging fairness and quality of charging service. Based on the RBC transmitter's coverage model and receiver's charging / discharging model, a Genetic Algorithm (GA)-based and a Particle Swarm Optimization (PSO)-based scheme are put forth to resolve the above issue. Moreover, we present a scheduling method to evaluate the performance of the proposed algorithms. Numerical results corroborate that the optimized deployment schemes outperform uniform and random deployment in 10%-20% charging efficiency improvement.

cs.ET↗

arXiv2020

Resonant Beam Communications with Photovoltaic Receiver for Optical Data and Power Transfer

The vision and requirements of the sixth generation (6G) mobile communication systems are expected to adopt freespace optical communication (FSO) and wireless power transfer (WPT). The laser-based WPT or wireless information transfer (WIT) usually faces the challenges of mobility and safety. We present a mobile and safe resonant beam communication (RBCom) system, which can realize high-rate simultaneous wireless information and power transfer (SWIPT). We propose an analytical model to depict its carrier beam and information transfer procedures. The numerical results show that RBCom can achieve more than 40 mW charging power and 1:6 Gbit/s channel capacity with orthogonal frequency division multiplexing (OFDM) scheme, which can be applied in future scenario where power and high-rate data are simultaneously desired.

eess.SP↗

arXiv2020

The effect of Coulomb field on laser-induced ultrafast imaging methods

By performing a joint theoretical and experimental investigation on the high-order above-threshold ionization (HATI) spectrum, the dominant role of the 3rd-return-recollision trajectories in the region near the cutoff due to the ionic Coulomb field is identified. This invalidates the key assumption adopted in the conventional laser-induced electron diffraction (LIED) approach that the 1st-returnrecollision trajectories dominate the spectrum according to strong field approximation (SFA). Our results show that the incident (return) electron beams produced by the 1st and 3rd returns possess distinct characteristics of beam energy, beam diameter and temporal evolution law due to the influence of Coulomb field, and therefore the extracted results in the LIED will be altered if the significance of the 3rd-return-recollision trajectories is properly considered in the analysis. Such Coulomb field effect should be taken into account in all kinds of laser-induced imaging schemes based on recollision.

physics.atom-ph↗

arXiv2019

Quantum dynamics of atomic Rydberg excitation in strong laser fields

Neutral atoms have been observed to survive intense laser pulses in high Rydberg states with surprisingly large probability. Only with this Rydberg-state excitation (RSE) included is the picture of intense-laser-atom interaction complete. Various mechanisms have been proposed to explain the underlying physics. However, neither one can explain all the features observed in experiments and in time-dependent Schrödinger equation (TDSE) simulations. Here we propose a fully quantum-mechanical model based on the strong-field approximation (SFA). It well reproduces the intensity dependence of RSE obtained by the TDSE, which exhibits a series of modulated peaks. They are due to recapture of the liberated electron and the fact that the pertinent probability strongly depends on the position and the parity of the Rydberg state. We also present measurements of RSE in xenon at 800 nm, which display the peak structure consistent with the calculations.

physics.atom-ph↗

arXiv2019

Accuracy of the semiclassical picture of photoionization in intense laser fields

In the semiclassical picture of photoionization process in intense laser fields, the ionization rate solely depends on the amplitude of the electric field and the final photoelectron momentum corresponds to the instant of ionization of the photoelectron, however, this picture has never been checked rigorously. Recently an attosecond angular streaking technique based on this semiclassical perspective has been widely applied to temporal measurement of the atomic and molecular dynamics in intense laser fields. We use a Wigner-distribution-like function to calculate the time-emission angle distribution, angular distribution and ionization time distribution for atomic ionization process in elliptically polarized few-cycle laser fields. By comparing with semiclassical calculations, we find that the two methods always show discrepancies except in some specific cases and the offset angles are generally not consistent with the offset times of the ionization time distributions obtained by the two methods even when the non-adiabatic effect is taken into account, indicating that the "attoclock" technique is in principle inaccurate. Moreover, calculations for linearly polarized laser fields also show similar discrepancies between two methods in the ionization time distribution. Our analysis indicates that the discrepancy between the semiclassical and quantum calculations can be attributed to correlation, i. e., temporal nonlocalization effect.

physics.atom-ph↗

arXiv2018

Optimal Resonant Beam Charging for Electronic Vehicles in Internet of Intelligent Vehicles

To enable electric vehicles (EVs) to access to the internet of intelligent vehicles (IoIV), charging EVs wirelessly anytime and anywhere becomes an urgent need. The resonant beam charging (RBC) technology can provide high-power and long-range wireless energy for EVs. However, the RBC system is unefficient. To improve the RBC power transmission efficiency, the adaptive resonant beam charging (ARBC) technology was introduced. In this paper, after analyzing the modular model of the ARBC system, we obtain the closed-form formula of the end-to-end power transmission efficiency. Then, we prove that the optimal power transmission efficiency uniquely exists. Moreover, we analyze the relationships among the optimal power transmission efficiency, the source power, the output power, and the beam transmission efficiency, which provide the guidelines for the optimal ARBC system design and implementation. Hence, perpetual energy can be supplied to EVs in IoIV virtually.

eess.SY↗

arXiv2018

Earning Maximization with Quality of Charging Service Guarantee for IoT Devices

Resonant Beam Charging (RBC) is a promising Wireless Power Transfer (WPT) technology to provide long-range, high-power, mobile and safe wireless power for the Internet of Things (IoT) devices. The Point-to-Multipoint (PtMP) RBC system can charge multiple receivers simultaneously similar to WiFi communications. To guarantee the Quality of Charging Service (QoCS) for each receiver and maximize the overall earning in the PtMP RBC service, we specify the Charging Pricing Strategy (CPS) and develop the High Priority Charge (HPC) scheduling algorithm to control the charging order and power allocation. Each receiver is assigned a priority, which is updated dynamically based on its State of Charging (SOC) and specified charging power. The receivers with high priorities are scheduled to be charged in each time slot. We present the pseudo code of the HPC algorithm based on quantifying the receiver's SOC, discharging energy and various relevant parameters. Relying on simulation analysis, we demonstrate that the HPC algorithm can achieve better QoCS and earning than the Round-Robin Charge (RRC) scheduling algorithm. Based on the performance evaluation, we illustrate that the methods to improve the PtMP RBC service are: 1) limiting the receiver number within a reasonable range and 2) prolonging the charging duration as long as possible. In summary, the HPC scheduling algorithm provides a practical strategy to maximize the earning of the PtMP RBC service with each receiver's QoCS guarantee.

eess.SY↗

arXiv2018

TDMA in Adaptive Resonant Beam Charging for IoT Devices

Resonant beam charging (RBC) can realize wireless power transfer (WPT) from a transmitter to multiple receivers via resonant beams. The adaptive RBC (ARBC) can effectively improve its energy utilization. In order to support multi-user WPT in the ARBC system, we propose the time-division multiple access (TDMA) method and design the TDMA-based WPT scheduling algorithm. Our TDMA WPT method has the features of concurrently charging, continuous charging current, individual user power control, constant driving power and flexible driving power control. The simulation shows that the TDMA scheduling algorithm has high efficiency, as the total charging time is roughly half (46.9% when charging 50 receivers) of that of the alternative scheduling algorithm. Furthermore, the TDMA for WPT inspires the ideas of enhancing the ARBC system, such as flow control and quality of service (QoS).

eess.SP↗