arXiv subjects

Mingxian Huang

Publications and source records attributed to Mingxian Huang.

5 recordsLinked to original sources

arXiv2024

Giant Nonreciprocity of Surface Acoustic Waves induced by a positive-negative magnetostrictive heterostructure

Lack of nonreciprocity is one of the major drawbacks of solid-state acoustic devices, which has hindered the development of microwave-frequency acoustic isolators and circulators. Here we report giant nonreciprocal transmission of shear-horizontal surface acoustic waves (SH-SAWs) on a LiTaO3 substrate coated with a negative-positive magnetostrictive bilayer structure of Ni/Ti/FeCoSiB. Although the static magnetic moments of two layers are parallel, SH-SAWs can excite optical-mode spin waves much stronger than acoustic-mode ones at relatively low frequencies via magnetoelastic coupling. The measured magnitude nonreciprocity exceeds 40 dB (or 80 dB/mm) at 2.333 GHz. In addition, maximum nonreciprocal phase accumulation reaches 188° (376°/mm), which is desired for an effective SAW circulator. Our theoretical model and calculations provide an insight into the observed phenomena and demonstrate a pathway for further improvement of nonreciprocal acoustic devices.

physics.app-ph↗

arXiv2023

Large Nonreciprocity of Shear-Horizontal Surface Acoustic Waves induced by Magnetoelastic Bilayers

We report large nonreciprocity in the transmission of shear-horizontal surface acoustic waves (SAWs) on LiTaO3 substrate coated with a FeCoSiB/NiFeCu magnetoelastic bilayer. The large difference in saturation magnetization of the two layers not only brings nonreciprocal spin waves (SWs), but also ensures the phonon-magnon (SAWs-SWs) coupling at relatively low wavenumbers. It is found that the angle between the magnetization and the wavevector play important roles in determining the strength of magnetoelastic coupling and nonreciprocity, simultaneously. A large nonreciprocal transmission of SAWs about 30 dB (i.e. 60 dB/mm) is demonstrated at 2.33 GHz. In addition, the dispersion relation between coupled SH-SAWs and nonreciprocal SWs is developed, which provide a good insight into the observed phenomena. Our results offer a convenient approach to implement nonreciprocal SAW isolators or circulators.

physics.app-ph↗

arXiv2023

Observation of Enhanced Dynamic ΔG effect near Ferromagnetic Resonance Frequency

The field-dependence elastic modulus of magnetostrictive films, also called ΔE or ΔG effect, is crucial for ultrasensitive magnetic field sensors based on surface acoustic waves (SAWs). In spite of a lot of successful demonstrations, rare attention was paid to the frequency-dependence of ΔE or ΔG effect. In current work, shear horizontal-type SAW delay lines coated with a thin FeCoSiB layer have been studied at various frequencies upon applying magnetic fields. The change of shear modulus of FeCoSiB has been extracted by measuring the field-dependent phase shift of SAWs. It is found that the ΔG effect is significantly enhanced at high-order harmonic frequencies close to the ferromagnetic resonance frequency, increasing by ~82% compared to that at the first SAW mode (128 MHz). In addition, the smaller the effective damping factor of magnetostrictive layer, the more pronounced ΔG effect can be obtained, which is explained by our proposed dynamic magnetoelastic coupling model.

physics.app-ph↗

arXiv2023

Giant spin-vorticity coupling excited by shear-horizontal surface acoustic waves

A non-magnetic layer can inject spin-polarized currents into an adjacent ferromagnetic layer via spin vorticity coupling (SVC), inducing spin wave resonance (SWR). In this work, we present the theoretical model of SWR generated by shear-horizontal surface acoustic wave (SH-SAW) via SVC, which contains distinct vorticities from well-studied Rayleigh SAW. Both Rayleigh- and SH-SAW delay lines have been designed and fabricated with a Ni81Fe19/Cu bilayer integrated on ST-cut quartz. Given the same wavelength, the measured power absorption of SH-SAW is four orders of magnitudes higher than that of the Rayleigh SAW. In addition, a high-order frequency dependence of the SWR is observed in the SH-SAW, indicating SVC can be strong enough to compare with magnetoelastic coupling.

physics.app-ph↗

arXiv2022

Self-biased SAW Magnetic Field Sensors Based on Angle Dependent Magneto-acoustic Coupling

Surface-acoustic-wave (SAW) based devices have emerged as a promising technology in magnetic field sensing by integrating a magnetostrictive layer with the giant ΔE/ΔG effect. However, almost all SAW magnetic field sensors require a bias field to obtain high sensitivity. In addition, the true nature of magneto-acoustic coupling still presents a major challenge in understanding and designing of this kind of devices. In current work, a dynamic magnetoelastic model for the ΔE/ΔG effect is established in consideration of the important role of the dipole-dipole interaction. The model is also implemented into a FEM software to calculate the resonance frequency responses of multiple fabricated sensors with different ψ angles between of the acoustic wave vector and the induced uniaxial magnetic anisotropy. The measured results are in excellent agreement with the simulated ones. A strong resonance frequency sensitivity (RFS) of 630.4 kHz/Oe was achieved at zero bias field for the device with optimized ψ angle. Furthermore, the RFS measurements along different directions verify its vector-sensing capability.

physics.app-ph↗