arXiv subjects

Mingyun Yuan

Publications and source records attributed to Mingyun Yuan.

12 recordsLinked to original sources

arXiv2026

Interplay between growth conditions and formation of localized light emitters in epitaxial AlN thin films

AlN is a promising material for integrated quantum photonics due to its broad transparency window, its compatibility with CMOS technology, and the possibility to host localized light emitters acting as single photon sources. However, little is understood yet about the microscopic nature and formation mechanisms of these light emitters. In this contribution, we demonstrate that their formation efficiency depends significantly on the growth conditions of the AlN thin film. We reveal that localized light emitters with distinct zero-phonon lines in the 600--800~nm range can be efficiently formed in epitaxial AlN thin films grown under N-rich conditions by exposing the AlN to a post-growth treatment consisting in a proton irradiation followed by an annealing process. In contrast, the density of light emitters formed in AlN grown under Al-rich conditions remains low, even after the thin films have been exposed to the post-growth treatment. These results open a pathway toward a better understanding of the microscopic nature of these light emission centers, as well as their engineered integration as quantum light sources in AlN-based optomechanical platforms.

physics.optics↗

arXiv2026

Al$_{1-x}$Hf$_{x}$N Thin Films with Enhanced Piezoelectric Responses for GHz Surface Acoustic Wave Devices

Ternary compounds obtained by alloying wurtzite AlN with transition metals have emerged as promising materials with significantly enhanced piezoelectric characteristics relative to binary AlN. The increased electromechanical coupling in these compounds boosts the performance of high-frequency acoustic devices. So far, progress has largely focused on Al$_{1-x}$Sc$_x$N, which is costly and poorly compatible with complementary metal-oxide-semiconductor (CMOS) technologies. Here, we investigate aluminum hafnium nitride (Al$_{1-x}$Hf$_{x}$N) as a scalable and potentially CMOS-compatible alternative to Al$_{1-x}$Sc$_x$N. Using reactive co-sputtering on both Si and sapphire substrates, we demonstrate wurtzite Al$_{1-x}$Hf$_{x}$N thin films ($x \leq 0.17$) with strong $c$-axis texture and nearly isotropic lattice expansion upon Hf incorporation. X-ray absorption spectroscopy indicates cross-gap hybridization between N 2$p$ and Hf 5$d$ states, which can enhance the Born effective charge and, thereby, the piezoelectric response. Correspondingly, we observe a nearly two-fold enhancement in the piezoelectric coefficient, $d_{33}$, relative to AlN, despite increasing structural disorder in Al$_{1-x}$Hf$_{x}$N. Building on this finding, we demonstrate Al$_{1-x}$Hf$_{x}$N GHz surface acoustic wave (SAW) resonators that exhibit enhanced performance, as well as efficient excitation of bulk acoustic waves with low propagation losses. These results establish Al$_{1-x}$Hf$_{x}$N as a promising platform for next-generation high-frequency electromechanical devices, with prospects for further piezoelectric enhancements through improved epitaxy.

cond-mat.mtrl-sci↗

arXiv2026

Imaging GHz surface acoustic wave modes in electrostricted LaAlO$_3$/SrTiO$_3$ heterostructures

The LaAlO$_3$/SrTiO$_3$ (LAO/STO) interface hosts a gate-tunable superconducting two-dimensional electron gas (2DEG) which can be programmed to create quantum devices such as ballistic electron waveguides and quantum dots. To fully exploit this platform for quantum transport, a key requirement is the ability to shuttle single electrons, electron pairs, and other exotic states between spatially separated devices with precision. Surface acoustic waves (SAWs), which travel along the surface of a solid, offer a powerful route to achieve this through their moving electrical potential that captures and transfers electrons. %acoustoelectric coupling. In particular, SAWs in the GHz regime enable fast, controlled transport of individual quantum particles. Although this approach is well-explored in GaAs-based 2DEG, SAW generation in STO remains largely unexplored due to the lack of intrinsic piezoelectricity at room temperature. Here, we investigate room-temperature SAWs in LAO/STO and observe SAW modes up to 2.2 GHz with very low propagation loss of the order $10^{-3}$ dB per wavelength. To directly visualize these modes, we employ Atomic Acoustic Force Microscopy (AAFM), achieving sub-micron resolution imaging of the SAW wave forms, providing insight into the electrostriction-induced SAW generation mechanism. Our measurements indicate a shear horizontal-type mode, which provides the ability to couple to in-plane degrees of freedom for future acoustoelectric and quantum device applications. This work studies the fundamentals of SAW excitation and propagation on STO, a widely used and commercially available substrate, enabling straightforward coupling of SAWs to a broad range of materials that can be grown or transferred onto STO.

cond-mat.str-el↗

arXiv2026

Topical review on acousto-optical Floquet engineering of single-photon emitters

The combination of solid state single-photon emitters and mechanical excitations on a common platform is a promising approach for the development of hybrid quantum technologies. In this topical review we discuss state-of-the-art platforms for emitter-based acousto-optics and their feasibility for acousto-optical Floquet engineering. To this aim we investigate theoretically the resonance fluorescence (RF) spectrum of an acoustically modulated single-photon emitter under arbitrarily strong optical driving. In the spectrum, the combination of Mollow triplet physics and phonon sidebands results in a complex structure of crossings, anti-crossings, and line suppressions. We apply Floquet theory to develop an analytical expression for the RF spectrum. Complemented with perturbative and non-perturbative techniques, this allows us to fully understand the underlying acousto-optical double dressing physics of the hybrid quantum system, explaining the observed spectral features. We use these insights to perform an experimental feasibility study of existing emitter-based acousto-optical platforms and come to the conclusion that surface and bulk acoustic waves interfaced with quantum dots as an established Mollow triplet platform represent particularly promising infrastructures for acousto-optical Floquet engineering.

cond-mat.mes-hall↗

arXiv2019

Sound-driven single-electron transfer in a circuit of coupled quantum rails

Surface acoustic waves (SAWs) strongly modulate the shallow electric potential in piezoelectric materials. In semiconductor heterostructures such as GaAs/AlGaAs, SAWs can thus be employed to transfer individual electrons between distant quantum dots. This transfer mechanism makes SAW technologies a promising candidate to convey quantum information through a circuit of quantum logic gates. Here we present two essential building blocks of such a SAW-driven quantum circuit. First, we implement a directional coupler allowing to partition a flying electron arbitrarily into two paths of transportation. Second, we demonstrate a triggered single-electron source enabling synchronisation of the SAW-driven sending process. Exceeding a single-shot transfer efficiency of 99 %, we show that a SAW-driven integrated circuit is feasible with single electrons on a large scale. Our results pave the way to perform quantum logic operations with flying electron qubits.

cond-mat.mes-hall↗

arXiv2019

Cavity electromechanics with parametric mechanical driving

Microwave optomechanical circuits have been demonstrated in the past years to be extremely powerfool tools for both, exploring fundamental physics of macroscopic mechanical oscillators as well as being promising candidates for novel on-chip quantum limited microwave devices. In most experiments so far, the mechanical oscillator is either used as a passive device element and its displacement is detected using the superconducting cavity or manipulated by intracavity fields. Here, we explore the possibility to directly and parametrically manipulate the mechanical nanobeam resonator of a cavity electromechanical system, which provides additional functionality to the toolbox of microwave optomechanical devices. In addition to using the cavity as an interferometer to detect parametrically modulated mechanical displacement and squeezed thermomechanical motion, we demonstrate that parametric modulation of the nanobeam resonance frequency can realize a phase-sensitive parametric amplifier for intracavity microwave photons. In contrast to many other microwave amplification schemes using electromechanical circuits, the presented technique allows for simultaneous cooling of the mechanical element, which potentially enables this type of optomechanical microwave amplifier to be quantum-limited.

cond-mat.mes-hall↗

arXiv2017

Incorporation of a dc bias in a high-Q 3d microwave cavity

We report a technique for applying a dc bias in a 3d microwave cavity. This is achieved by isolating the two halves of the cavity with a dielectric and directly using them as dc electrodes. By embedding a variable capacitance diode in the cavity, we tune the resonant frequency with a dc voltage at room temperature, demonstrating the introduction of a dc bias into the 3d cavity without compromising its high quality factor.

cond-mat.mes-hall↗

arXiv2017

A split-cavity design for the incorporation of a DC bias in a 3D microwave cavity

We report on a technique for applying a DC bias in a 3D microwave cavity. We achieve this by isolating the two halves of the cavity with a dielectric and directly using them as DC electrodes. As a proof of concept, we embed a variable capacitance diode in the cavity and tune the resonant frequency with a DC voltage, demonstrating the incorporation of a DC bias into the 3D cavity with no measurable change in its quality factor at room temperature. We also characterize the architecture at millikelvin temperatures and show that the split cavity design maintains a quality factor $Q_\text{i} \sim 8.8 \times 10^5$, making it promising for future quantum applications.

cond-mat.mes-hall↗

arXiv2016

Silicon nitride membrane resonators at millikelvin temperatures with quality factors exceeding $10^8$

We study mechanical dissipation of the fundamental mode of millimeter-sized, high quality-factor ($Q$) metalized silicon nitride membranes at temperatures down to 14 mK using a three-dimensional optomechanical cavity. Below 200 mK, high-$Q$ modes of the membranes show a diverging increase of $Q$ with decreasing temperature, reaching $Q=1.27\times10^8$ at 14 mK, an order of magnitude higher than reported before. The ultra-low dissipation makes the membranes highly attractive for the study of optomechanics in the quantum regime, as well as for other applications of optomechanics such as microwave to optical photon conversion.

cond-mat.mes-hall↗

arXiv2015

Large cooperativity and microkelvin cooling with a three-dimensional optomechanical cavity

In cavity optomechanics, light is used to control mechanical motion. A central goal of the field is achieving single-photon strong coupling, which would enable the creation of quantum superposition states of motion. Reaching this limit requires significant improvements in optomechanical coupling and cavity coherence. Here we introduce an optomechanical architecture consisting of a silicon nitride membrane coupled to a three-dimensional superconducting microwave cavity. Exploiting their large quality factors, we achieve an optomechanical cooperativity of 146,000 and perform sideband cooling of the kilohertz-frequency membrane motion to 34$\pm$5 $μ$K, the lowest mechanical mode temperature reported to date. The achieved cooling is limited only by classical noise of the signal generator, and should extend deep into the ground state with superconducting filters. Our results suggest that this realization of optomechanics has the potential to reach the regimes of ultra-large cooperativity and single-photon strong coupling, opening up a new generation of experiments.

cond-mat.mes-hall↗

arXiv2014

Signatures of Valley Kondo Effect in Si/SiGe Quantum Dots

We report measurements consistent with the valley Kondo effect in Si/SiGe quantum dots, evidenced by peaks in the conductance versus source-drain voltage that show strong temperature dependence. The Kondo peaks show unusual behavior in a magnetic field that we interpret as arising from the valley degree of freedom. The interplay of valley and Zeeman splittings is suggested by the presence of side peaks, revealing a zero-field valley splitting between 0.28 to 0.34 meV. A zero-bias conductance peak for non-zero magnetic field, a phenomenon consistent with valley non- conservation in tunneling, is observed in two samples.

cond-mat.mes-hall↗

arXiv2011

Si/SiGe quantum dot with superconducting single-electron transistor charge sensor

We report a robust process for fabrication of surface-gated Si/SiGe quantum dots (QDs) with an integrated superconducting single-electron transistor (S-SET) charge sensor. A combination of a deep mesa etch and AlOx backfill is used to reduce gate leakage. After the leakage current is suppressed, Coulomb oscillations of the QD and the current-voltage characteristics of the S-SET are observed at a temperature of 0.3 K. Coupling of the S-SET to the QD is confirmed by using the S-SET to perform sensing of the QD charge state.

cond-mat.mes-hall↗