arXiv subjects

Mitra L. Taheri

Publications and source records attributed to Mitra L. Taheri.

9 recordsLinked to original sources

arXiv2025

Revisiting the Influence of Sn in Cu-Al alloys: A Third Element Effect Enabling Stainless Steel Type Aqueous Passivation Behavior

The influence of Sn alloying additions on the aqueous passivation behavior of Cu-Al alloys was revisited and found to function as a new third element effect in acidified 0.1 M Na2SO4 solution. The role of each element during the process of aqueous passivation was investigated using electrochemical and surface-sensitive ex-situ and in-operando spectroscopic techniques. The connection between passivation and the atomic arrangements of atoms in the solid solution was supported by first principles based cluster expansion calculations and Monte Carlo simulations probing the chemical short-range order in the Cu-Al-Sn system. High purity Sn, like high purity Cu, did not passivate in the test environment, whereas high purity Al formed a passive film with a stable passive current density of 0.01 mA/cm^2. Cu-xAl-Sn solid solution alloys where x greater than 18 at.%, containing less than 3 at.% Sn additions exhibited lower corrosion rates than Cu-xAl alloys, brought by Al(III) and Sn(IV, II) unidentified complex oxides formation on the surface. A strong influence of Sn on Al(III) passivation was observed, i.e., strongly suggesting a third element effect type behavior. Possible governing processes explaining the stainless steel type corrosion behavior are discussed, providing insights for exploring novel synergies in the design of corrosion resistant alloys.

cond-mat.mtrl-sci↗

arXiv2025

Designing Corrosion-Resistant CoCrNi Medium Entropy Alloys via Short-Range Order Modification

Equiatomic CoCrNi medium entropy alloys are known for their unique properties linked to chemical short-range order (CSRO), crucial in both percolation processes and/or nucleation and growth processes influencing alloy passivation in aqueous environments. This study combines extended x-ray absorption fine structure, atomistic simulations, electrochemical methods, x-ray photoelectron spectroscopy, and transmission electron microscopy to explore CSRO evolution, passive film formation, as well as its characteristics in the as-homogenized CoCrNi condition, both before and after aging treatment. Results reveal a shift in local alloying element bonding environments post-aging, with simulations indicating increased Cr-Cr CSRO in 2nd nearest neighbor shells. Enhanced passive film formation kinetics and superior protection of the aged alloy in harsh acidified 3 mol/L NaCl solution indicate improved aqueous passivation correlated with Cr-Cr CSRO. This work establishes a direct connection between alloy CSRO and aqueous passivation in CoCrNi, highlighting its potential for tailored corrosion-resistant applications.

cond-mat.mtrl-sci↗

arXiv2024

Grain boundary metastability controls irradiation resistance in nanocrystalline metals

Grain boundaries (GBs) in polycrystalline materials are powerful sinks for irradiation defects. While standard theories assume that the sink efficiency of a grain boundary is defined solely by its character before irradiation, recent evidence conclusively shows that the irradiation sink efficiency is a highly dynamic property controlled by the intrinsic metastability of GBs under far-from-equilibrium irradiation conditions. In this paper, we reveal that the denuded (i.e., defect-free) zone, typically the signature of a strong sink, can collapse as irradiation damage accumulates. We propose a radiation damage evolution model that captures this behavior based on the emergence of a series of irradiation defect-enabled metastable GB microstate changes that dynamically alter the ability of the GB to absorb further damage. We show that these microstate changes control further defect absorption and give rise to the formation of a defect network that manifests itself as a net Nye-tensor signal detectable via lattice curvature experiments.

cond-mat.mtrl-sci↗

arXiv2024

An experimental high-throughput to high-fidelity study towards discovering Al-Cr containing corrosion-resistant compositionally complex alloys

Compositionally complex alloys hold the promise of simultaneously attaining superior combinations of properties, such as corrosion resistance, light-weighting, and strength. Achieving this goal is a challenge due in part to a large number of possible compositions and structures in the vast alloy design space. High-throughput methods offer a path forward, but a strong connection between the synthesis of an alloy of a given composition and structure with its properties has not been fully realized to date. Here, we present the rapid identification of corrosion-resistant alloys based on combinations of Al and Cr in a base Al-Co-Cr-Fe-Ni alloy. Previously unstudied alloy stoichiometries were identified using a combination of high-throughput experimental screening coupled with key metallurgical and electrochemical corrosion tests, identifying alloys with excellent passivation behavior. The alloy native oxide performance and its self-healing attributes were probed using rapid tests in deaerated 0.1 mol/L H2SO4. Importantly, a correlation was found between the electrochemical impedance modulus of the exposure-modified air-formed film and self-healing rate of the CCAs. Multi-element extended x-ray absorption fine structure analyses connected more ordered type chemical short-range order in the Ni-Al 1st nearest-neighbor shell to poorer corrosion resistance. This report underscores the utility of high throughput exploration of compositionally complex alloys for the identification and rapid screening of a vast stoichiometric space.

cond-mat.mtrl-sci↗

arXiv2023

Quantum paramagnetism in a non-Kramers rare-earth oxide: Monoclinic $\rm Pr_2Ti_2O_7$

Little is so far known about the magnetism of the $\rm A_2B_2O_7$ monoclinic layered perovskites that replace the spin-ice supporting pyrochlore structure for $r_A/r_B>1.78$. We show that high quality monoclinic Pr$_2$Ti$_2$O$_7$ single crystals with a three-dimensional network of non-Kramers Pr$^{3+}$ ions that interact through edge-sharing super-exchange interactions, form a singlet ground state quantum paramagnet that does not undergo any magnetic phase transitions down to at least 1.8 K. The chemical phase stability, structure, and magnetic properties of the layered perovskite Pr$_2$Ti$_2$O$_7$ were investigated using x-ray diffraction, transmission electron microscopy, and magnetization measurements. Synthesis of polycrystalline samples with the nominal compositions of Pr$_2$Ti$_{2+x}$O$_7$ ($-0.16 \leq x \leq 0.16$) showed that deviations from the Pr$_2$Ti$_2$O$_7$ stoichiometry lead to secondary phases of related, structures including the perovskite phase Pr$_{2/3}$TiO$_3$ and the orthorhombic phases Pr$_4$Ti$_9$O$_{24}$ and Pr$_2$TiO$_5$. No indications of site disordering (stuffing and anti-stuffing) or vacancy defects were observed in the Pr$_2$Ti$_2$O$_7$ majority phase. A procedure for growth of high-structural-quality, stoichiometric single crystals of Pr$_2$Ti$_2$O$_7$ by the traveling solvent floating zone (TSFZ) method is reported. Thermo-magnetic measurements of single-crystalline Pr$_2$Ti$_2$O$_7$ reveal an isolated singlet ground state that we associate with the low symmetry crystal electric field environments that split the $2J+1=9$-fold degenerate spin-orbital multiplets of the four differently coordinated Pr$^{3+}$ ions into 36 isolated singlets resulting in an anisotropic temperature independent van-Vleck susceptibility at low $T$. A small isotropic Curie term is associated with 0.96(2)\% non-interacting Pr$^{4+}$ impurities.

cond-mat.mtrl-sci↗

arXiv2023

Why is EXAFS analysis for multicomponent metals so hard? Challenges and opportunities for measuring ordering in complex concentrated alloys using x-ray absorption spectroscopy

Short range order is a critical driver of properties (e.g. corrosion resistance and tensile strength) in multicomponent alloys such as complex concentrated alloys (CCAs). Extended x-ray absorption fine structure (EXAFS) is a powerful technique well suited for quantifying this short range order.Here, we described in detail the characteristics of CCAs that make the already challenging task of analyzing EXAFS data even more difficult. We then illustrate novel paths towards robust and scalable quantitative SRO analysis which will accelerate the scientific understanding and development of CCAs.

cond-mat.mtrl-sci↗

arXiv2022

Mapping Structural Heterogeneity at the Nanoscale with Scanning Nano-structure Electron Microscopy (SNEM)

Here we explore the use of scanning electron diffraction coupled with electron atomic pair distribution function analysis (ePDF) to understand the local order as a function of position in a complex multicomponent system, a hot rolled, Ni-encapsulated, Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ bulk metallic glass (BMG), with a spatial resolution of 3 nm. We show that it is possible to gain insight into the chemistry and chemical clustering/ordering tendency in different regions of the sample, including in the vicinity of nano-scale crystallites that are identified from virtual dark field images and in heavily deformed regions at the edge of the BMG. In addition to simpler analysis, unsupervised machine learning was used to extract partial PDFs from the material, modeled as a quasi-binary alloy, and map them in space. These maps allowed key insights not only into the local average composition, as validated by EELS, but also a unique insight into chemical short-range ordering tendencies in different regions of the sample during formation. The experiments are straightforward and rapid and, unlike spectroscopic measurements, don't require energy filters on the instrument. We spatially map different quantities of interest (QoI's), defined as scalars that can be computed directly from positions and widths of ePDF peaks or parameters refined from fits to the patterns. We developed a flexible and rapid data reduction and analysis software framework that allows experimenters to rapidly explore images of the sample on the basis of different QoI's. The power and flexibility of this approach are explored and described in detail. Because of the fact that we are getting spatially resolved images of the nanoscale structure obtained from ePDFs we call this approach scanning nano-structure electron microscopy (SNEM), and we believe that it will be powerful and useful extension of current 4D-STEM methods.

cond-mat.mtrl-sci↗

arXiv2021

Multi-modal Spectroscopic Study of Surface Termination Evolution in Cr2TiC2Tx MXene

Control of surface functionalization of MXenes holds great potential, and in particular, may lead to tuning of magnetic and electronic order in the recently reported magnetic Cr2TiC2Tx. Here, vacuum annealing experiments of Cr2TiC2Tx are reported with in situ electron energy loss spectroscopy and novel in situ Cr K-edge extended energy loss fine structure analysis, which directly tracks the evolution of the MXene surface coordination environment. These in situ probes are accompanied by benchmarking synchrotron X-ray absorption fine structure measurements and density functional theory calculations. With the etching method used here, the MXene has an initial termination chemistry of Cr2TiC2O1.3F0.8. Annealing to 600 C results in the complete loss of -F, but -O termination is thermally stable up to (at least) 700 C. These findings demonstrate thermal control of -F termination in Cr2TiC2Tx and offer a first step towards termination engineering this MXene for magnetic applications. Moreover, this work demonstrates high energy electron spectroscopy as a powerful approach for surface characterization in 2D materials.

cond-mat.mtrl-sci↗

arXiv2018

Control of hidden ground-state order in NdNiO$_3$ superlattices

The combination of charge and spin degrees of freedom with electronic correlations in condensed matter systems leads to a rich array of phenomena, such as magnetism, superconductivity, and novel conduction mechanisms. While such phenomena are observed in bulk materials, a richer array of behaviors becomes possible when these degrees of freedom are controlled in atomically layered heterostructures, where one can constrain dimensionality and impose interfacial boundary conditions. Here, we unlock a host of unique, hidden electronic and magnetic phase transitions in NdNiO$_3$ while approaching the two-dimensional (2D) limit, resulting from the differing influences of dimensional confinement and interfacial coupling. Most notably, we discover a new phase in fully 2D, single layer NdNiO$_3$, in which all signatures of the bulk magnetic and charge ordering are found to vanish. In addition, for quasi two-dimensional layers down to a thickness of two unit cells, bulk-type ordering persists but separates from the onset of insulating behavior in a manner distinct from that found in the bulk or thin film nickelates. Using resonant x-ray spectroscopies, first-principles theory, and model calculations, we propose that the single layer phase suppression results from a new mechanism of interfacial electronic reconstruction based on ionicity differences across the interface, while the phase separation in multi-layer NdNiO$_3$ emerges due to enhanced 2D fluctuations. These findings provide insights into the intertwined mechanisms of charge and spin ordering in strongly correlated systems in reduced dimensions and illustrate the ability to use atomic layering to access hidden phases.

cond-mat.str-el↗