SearcharxivSearch

arXiv subjects

Miyu Feng

Publications and source records attributed to Miyu Feng.

5 recordsLinked to original sources

Reliability-Constrained Blind Beam Alignment for Backscatter-MIMO mounted Target in Cluttered Multipath Channels

Practical ISAC is constrained by static clutter and NLoS multipath, which obscure target-coupled echoes and induce spurious peaks for beam alignment. Existing receiver-side methods largely model targets as passive scatterers, limiting the structural separability of target echoes from the environment. This paper establishes a structural correspondence between these limitations and target-side Backscatter-MIMO responses: reflection modulation enables waveform-domain separation from unmodulated clutter, while retro-directional passive beamforming concentrates the tagged echo toward the BS-facing direction and suppresses NLoS-induced false-peak locking. To operationalize this correspondence, dual-end spatial locking is required to overcome cascaded backscatter loss and provide beam-domain angular information. We propose a downlink-triggered blind dual-end alignment protocol that jointly selects the BS and Backscatter-MIMO codeword indices from the tagged echo observed at the BS, without pilots, CSI feedback, or target synchronization. We further derive a clutter-aware remodulation waveform robust to fractional timing offsets and construct adjustable-width BS/Backscatter-MIMO codebooks via quadratic phase spoiling. For reliability characterization, we derive closed-form expressions for the coherence-averaged end-to-end success probability. The analysis shows that beam narrowing is not universally beneficial: in NLoS-dominated regimes, enlarging the array aperture may degrade alignment reliability. The optimal beamwidth is instead governed by cross-phase competition between discovery and alignment, yielding a nontrivial feasible region with an analytically characterized boundary. Simulations validate the analysis and demonstrate improved reliability-gated locked-link performance under strong clutter, severe NLoS multipath, and finite coherence time.

cs.IT

Metasurface-Enabled Superheterodyne Transmitter With Decoupled Harmonic-Free Signal Generation and Precoding

The evolution of programmable metasurfaces (PM) from passive beamforming to active information transmission marks a paradigm shift for next-generation wireless systems. However, this transition is hindered by fundamental limitations in conventional metasurface transmitter architectures, including restricted modulation orders, symbol-level spatial inconsistency, and significant harmonic interference. These issues stem from the intrinsic coupling between baseband signal processing and radio-frequency beamforming in monolithic designs reliant on simplistic switching mechanisms. This paper proposes a novel metasurface-enabled superheterodyne architecture (MSA) that fundamentally decouples these functionalities. The MSA introduces a dual-stage up-conversion process, comprising a digital up-conversion module for in-phase/quadrature modulation and baseband-to-intermediate frequency conversion, a precoder module for precoding, and a custom-designed magnitude-phase-decoupled metasurface that acts as a reconfigurable reflective mixer array. This decoupling of harmonic-free waveform generation from spatial precoding overcomes the critical drawbacks of existing approaches. Experimental results from a 5.8 GHz proof-of-concept prototype system validate the MSA's superior performance. The system generates spatially isotropic constellations for arbitrary-order QAM modulations, ensures consistent time-frequency signatures for applications like Doppler-spoofing, and achieves data rates up to 20 Mbps within a linear operating region that minimizes nonlinear distortion. The capability of employing spatial diversity and multi-stream interference cancellation has been demonstrated for the first time in a PM-based transmitter.

cs.IT

Swarm Antenna Arrays: From Deterministic to Stochastic Modeling

Swarm antenna arrays, composed of spatially distributed antennas mounted on unmanned agents, offer unprecedented flexibility and adaptability for wireless sensing and communication. However, their reconfigurable architecture, susceptibility to collisions, and inherently stochastic nature present significant challenges to realizing collaborative gain. It remains unclear how spatial coordination, positional perturbations, and large-scale topological configurations affect coherent signal aggregation and overall system performance. This paper investigates the feasibility of achieving coherent beamforming in such systems from both deterministic and stochastic perspectives. First, we develop a rigorous theoretical framework that characterizes the necessary and sufficient conditions for the emergence of grating lobes in multiple linear configurations. Notably, we show that for dual linear arrays, the classical half-wavelength spacing constraint can be safely relaxed without introducing spatial aliasing. This result challenges traditional array design principles and enables more flexible, collision-aware topologies. Second, we present a theoretical analysis, supported by empirical validation, demonstrating that coherent gain can be approximately preserved under realistic positional perturbations. Our results reveal that spatial perturbations introduce measurable degradation in the main lobe, an effect that cannot be mitigated merely by increasing the number of antennas. Instead, the primary benefit of scaling lies in reducing the variance of perturbation-induced fluctuations.

eess.SP

Metasurface-Enabled Superheterodyne Transmitter for Arbitrary-Order Modulation with Spatially Isotropic Symbol Distribution

Electromagnetically programmable information metasurfaces, as dynamically controllable 2D metamaterials, hold significant promise as low-profile hardware enabling passive wave control and signal generation for backscatter systems. However, current metasurface-based transmitters architecture fundamentally suffer from hardware non-modularization, forcing all transmitter functions onto nonlinear switch-based unit cells, which introduces symbol mapping inconsistency via phase coupling. Moreover, both temporal coding (limited by unit cell diodes) and space-time coding (impaired by symbol anisotropy) exhibit irreducible harmonic interference and entangled control of amplitude, phase, and beam direction. This paper proposes a metasurface-enabled superheterodyne architecture (MSA), comprising a digital up-conversion (DUC) module performing baseband-to-intermediate frequency (IF) conversion, filtering, and digital-to-analog conversion (DAC), and a reconfigurable metasurface featuring programmable unit cells that independently control both the magnitude and phase of the reflection coefficient. Systematically, the architecture leverages a dual-stage up-conversion process, typical of superheterodyne systems, but uniquely employs the metasurface for the final RF conversion stage. Building upon this framework, a proof-of-concept prototype featuring a 5.8 GHz magnitude-phase decoupled (MPD) metasurface (<15 degree phase deviation per state) and a DAC-based DUC module is presented. Extensive validation confirms the metasurface's capability for distortion-free mixing with arbitrary IF signals while maintaining consistent radiation patterns. The prototype successfully implements diverse QAM modulation schemes (4QAM to 256QAM) in mono-static and bi-static configurations, demonstrating symbol isotropy for spatially separated receivers and achieving a data rate of approximately 20 Mbps (at 5 MHz IF)...

eess.SY

Arbitrary Waveform Generated Metasurface: A New Paradigm for Direct Modulation and Beamforming Decoupling

Information Metasurface, also known as reconfigurable intelligent surface (RIS) has gained significant attention owing to its impressive abilities in electromagnetic (EM) wave manipulation with simple structures. Numerous studies focus on achieving efficient and versatile information transmission using RIS across various fields like wireless communication, radar detection, integrated sensing, and communications, among others. Previous studies demonstrate diverse approaches to achieve reflection modulation by utilizing the superposition of the quantified reflection coefficient (RC) of each unit but suffer from the computing complexity of codebook sequence, the safety of communication, and the flexibility of modulation. To address these challenges, we introduce a novel concept of information metasurface, namely AWG-RIS, which is capable of independently producing arbitrary baseband waveforms and beam patterns through a design that decouples magnitude and phase, without changing the beam pattern. The AWG-RIS functions as a reflection mixer, directly embedding the intended signal into the incoming EM waves. Subsequently, we developed an analysis framework and introduced the waveform factor and beamforming factor into the new model, offering theoretical support for the transition from the control signal to the outgoing electromagnetic wave. Additionally, we unveil the world's first prototype showcasing passive arbitrary waveform generation while maintaining the beam pattern unaltered. Leveraging the decoupling of direct modulation and beamforming, we explore additional applications in several domains relative to traditional RISs. Finally, we present experiments that confirm the generation of arbitrary waveforms and particular spectrograms.

eess.SY