arXiv subjects

Mo Li

Publications and source records attributed to Mo Li.

At least 73 records · Page 4Linked to original sources

arXiv2023

Optomechanical ring resonator for efficient microwave-optical frequency conversion

Phonons traveling in solid-state devices are emerging as a universal excitation that can couple to different physical systems through mechanical interaction. At microwave frequencies and in solid-state materials, phonons have a similar wavelength to optical photons, enabling them to interact efficiently with light and produce strong optomechanical effects that are highly desirable for classical and quantum signal transduction between optical and microwave. It becomes conceivable to build optomechanical integrated circuits (OMIC) that guide both photons and phonons and interconnect discrete photonic and phononic devices. Here, we demonstrate an OMIC including an optomechanical ring resonator (OMR), in which infrared photons and GHz phonons co-resonate to induce significantly enhanced interconversion. The OMIC is built on a hybrid platform where wide bandgap semiconductor gallium phosphide (GaP) is used as the waveguiding material and piezoelectric zinc oxide (ZnO) is used for phonon generation. The OMR features photonic and phononic quality factors of $>1\times10^5$ and $3.2\times10^3$, respectively, and resonantly enhances the optomechanical conversion between photonic modes to achieve an internal conversion efficiency $η_i=(2.1\pm0.1)%$ and a total device efficiency $η_{tot}=0.57\times10^{-6}$ at a low acoustic pump power of 1.6 mW. The efficient conversion in OMICs enables microwave-optical transduction for many applications in quantum information processing and microwave photonics.

physics.optics↗

arXiv2023

Silicon-lattice-matched boron-doped gallium phosphide: A scalable acousto-optic platform

The compact size, scalability, and strongly confined fields in integrated photonic devices enable new functionalities in photonic networking and information processing, both classical and quantum. Gallium phosphide (GaP) is a promising material for active integrated photonics due to its high refractive index, wide band gap, strong nonlinear properties, and large acousto-optic figure of merit. In this work we demonstrate that silicon-lattice-matched boron-doped GaP (BGaP), grown at the 12-inch wafer scale, provides similar functionalities as GaP. BGaP optical resonators exhibit intrinsic quality factors exceeding 25,000 and 200,000 at visible and telecom wavelengths respectively. We further demonstrate the electromechanical generation of low-loss acoustic waves and an integrated acousto-optic (AO) modulator. High-resolution spatial and compositional mapping, combined with ab initio calculations indicate two candidates for the excess optical loss in the visible band: the silicon-GaP interface and boron dimers. These results demonstrate the promise of the BGaP material platform for the development of scalable AO technologies at telecom and provide potential pathways toward higher performance at shorter wavelengths.

physics.optics↗

arXiv2023

CLNet: Complex Input Lightweight Neural Network designed for Massive MIMO CSI Feedback

Unleashing the full potential of massive MIMO in FDD mode by reducing the overhead of CSI feedback has recently garnered attention. Numerous deep learning for massive MIMO CSI feedback approaches have demonstrated their efficiency and potential. However, most existing methods improve accuracy at the cost of computational complexity and the accuracy decreases significantly as the CSI compression rate increases. This paper presents a novel neural network CLNet tailored for CSI feedback problem based on the intrinsic properties of CSI. CLNet proposes a forge complex-valued input layer to process signals and utilizes attention mechanism to enhance the performance of the network. The experiment result shows that CLNet outperforms the state-of-the-art method by average accuracy improvement of 5.41\% in both outdoor and indoor scenarios with average 24.1\% less computational overhead. Codes for deep learning-based CSI feedback CLNet are available at GitHub.

cs.IT↗

arXiv2023

SiFall: Practical Online Fall Detection with RF Sensing

Falls present a significant global public health challenge, especially in today's aging society, underscoring the importance of developing an effective fall detection system. Non-invasive radio-frequency (RF) based fall detection has garnered substantial attention due to its wide coverage and privacy-preserving nature. Existing RF-based fall detection systems approach falls as an activity classification problem, assuming that human falls introduce reproducible patterns to the RF signals. However, we argue that falls are inherently accidental, making their impact uncontrollable and unforeseeable. We propose a fundamentally different approach to fall detection by shifting the focus from directly identifying hard-to-quantify falls to recognizing normal, repeatable human activities, thus treating falls as abnormal activities outside the normal activity distribution. We introduce a self-supervised incremental learning system incorporating FallNet, a deep neural network that employs unsupervised learning techniques. Our real-time fall detection system prototype leverages WiFi Channel State Information (CSI) sensing data and has been extensively tested with 16 human subjects.

cs.HC↗

arXiv2023

Tunable phononic coupling in excitonic quantum emitters

Engineering the coupling between fundamental quantum excitations is at the heart of quantum science and technologies. A significant case is the creation of quantum light sources in which coupling between single photons and phonons can be controlled and harnessed to enable quantum information transduction. Here, we report the deterministic creation of quantum emitters featuring highly tunable coupling between excitons and phonons. The quantum emitters are formed in strain-induced quantum dots created in homobilayer semiconductor WSe2. The colocalization of quantum confined interlayer excitons and THz interlayer breathing mode phonons, which directly modulate the exciton energy, leads to a uniquely strong phonon coupling to single-photon emission. The single-photon spectrum of interlayer exciton emission features a single-photon purity >83% and multiple phonon replicas, each heralding the creation of a phonon Fock state in the quantum emitter. Owing to the vertical dipole moment of the interlayer exciton, the phonon-photon interaction is electrically tunable in a wide range, promising to reach the strong coupling regime. Our result demonstrates a new type of solid-state quantum excitonic-optomechanical system at the atomic interface that emits flying photonic qubits coupled with stationary phonons, which could be exploited for quantum transduction and interconnection.

cond-mat.mes-hall↗

arXiv2023

Visible Wavelength Flatband in a Gallium Phosphide Metasurface

Engineering the dispersion of light in a metasurface allows for controlling the light-matter interaction strength between light confined in the metasurface and materials placed within its near-field. Specifically, engineering a flatband dispersion increases the photonic density of states thereby enhancing the light-matter interaction. Here, we experimentally demonstrate a metasurface with a flat dispersion at visible wavelengths. We designed and fabricated a suspended one-dimensional gallium phosphide metasurface and measured the photonic band structure via energy-momentum spectroscopy, observing a photonic band that is flat over $10^o$ of half-angle at $\sim 580$nm. We integrated cadmium selenide nanoplatelets with the metasurface, and measured coupled photoluminescence into the flatband. Our demonstration of a photonic flatband will enable the possibility of integrating emerging quantum emitters to the metasurface with possible applications in nonlinear image processing, and topological photonics.

physics.optics↗

arXiv2023

Enhancing Deep Learning Performance of Massive MIMO CSI Feedback

CSI feedback is an important problem of Massive multiple-input multiple-output (MIMO) technology because the feedback overhead is proportional to the number of sub-channels and the number of antennas, both of which scale with the size of the Massive MIMO system. Deep learning-based CSI feedback methods have been widely adopted recently owing to their superior performance. Despite the success, current approaches have not fully exploited the relationship between the characteristics of CSI data and the deep learning framework. In this paper, we propose a jigsaw puzzles aided training strategy (JPTS) to enhance the deep learning-based Massive MIMO CSI feedback approaches by maximizing mutual information between the original CSI and the compressed CSI. We apply JPTS on top of existing state-of-the-art methods. Experimental results show that by adopting this training strategy, the accuracy can be boosted by 12.07% and 7.01% on average in indoor and outdoor environments, respectively. The proposed method is ready to adopt to existing deep learning frameworks of Massive MIMO CSI feedback. Codes of JPTS are available on GitHub for use.

cs.IT↗

arXiv2022

PriMask: Cascadable and Collusion-Resilient Data Masking for Mobile Cloud Inference

Mobile cloud offloading is indispensable for inference tasks based on large-scale deep models. However, transmitting privacy-rich inference data to the cloud incurs concerns. This paper presents the design of a system called PriMask, in which the mobile device uses a secret small-scale neural network called MaskNet to mask the data before transmission. PriMask significantly weakens the cloud's capability to recover the data or extract certain private attributes. The MaskNet is em cascadable in that the mobile can opt in to or out of its use seamlessly without any modifications to the cloud's inference service. Moreover, the mobiles use different MaskNets, such that the collusion between the cloud and some mobiles does not weaken the protection for other mobiles. We devise a {\em split adversarial learning} method to train a neural network that generates a new MaskNet quickly (within two seconds) at run time. We apply PriMask to three mobile sensing applications with diverse modalities and complexities, i.e., human activity recognition, urban environment crowdsensing, and driver behavior recognition. Results show PriMask's effectiveness in all three applications.

cs.CR↗

arXiv2022

Traffic disruption modelling with mode shift in multi-modal networks

A multi-modal transport system is acknowledged to have robust failure tolerance and can effectively relieve urban congestion issues. However, estimating the impact of disruptions across multi-transport modes is a challenging problem due to a dis-aggregated modelling approach applied to only individual modes at a time. To fill this gap, this paper proposes a new integrated modelling framework for a multi-modal traffic state estimation and evaluation of the disruption impact across all modes under various traffic conditions. First, we propose an iterative trip assignment model to elucidate the association between travel demand and travel behaviour, including a multi-modal origin-to-destination estimation for private and public transport. Secondly, we provide a practical multi-modal travel demand re-adjustment that takes the mode shift of the affected travellers into consideration. The pros and cons of the mode shift strategy are showcased via several scenario-based transport simulating experiments. The results show that a well-balanced mode shift with flexible routing and early announcements of detours so that travellers can plan ahead can significantly benefit all travellers by a delay time reduction of 46%, while a stable route assignment maintains a higher average traffic flow and the inactive mode-route choice help relief density under the traffic disruptions.

physics.soc-ph↗

arXiv2022

Long-range transport of 2D excitons with acoustic waves

Excitons are elementary optical excitation in semiconductors. The ability to manipulate and transport these quasiparticles would enable excitonic circuits and devices for quantum photonic technologies. Recently, interlayer excitons in 2D semiconductors have emerged as a promising candidate for engineering excitonic devices due to their long lifetime, large exciton binding energy, and gate tunability. However, the charge-neutral nature of the excitons leads to weak response to the in-plane electric field and thus inhibits transport beyond the diffusion length. Here, we demonstrate the directional transport of interlayer excitons in bilayer WSe2 driven by the propagating potential traps induced by surface acoustic waves (SAW). We show that at 100 K, the SAW-driven excitonic transport is activated above a threshold acoustic power and reaches 20 mm, a distance at least ten times longer than the diffusion length and only limited by the device size. Temperature-dependent measurement reveals the transition from the diffusion-limited regime at low temperature to the acoustic field-driven regime at elevated temperature. Our work shows that acoustic waves are an effective, contact-free means to control exciton dynamics and transport, promising for realizing 2D materials-based excitonic devices such as exciton transistors, switches, and transducers up to room temperature.

cond-mat.mes-hall↗

arXiv2021

Harnessing Optoelectronic Noises in a Photonic Generative Network

Integrated optoelectronics is emerging as a promising platform of neural network accelerator, which affords efficient in-memory computing and high bandwidth interconnectivity. The inherent optoelectronic noises, however, make the photonic systems error-prone in practice. It is thus imperative to devise strategies to mitigate and, if possible, harness noises in photonic computing systems. Here, we demonstrate a photonic generative network as a part of a generative adversarial network (GAN). This network is implemented with a photonic core consisting of an array of four programable phase-change memory cells to perform 4-elements vector-vector dot multiplication. We demonstrate that the GAN can generate a handwritten number ("7") in experiments and full ten digits in simulation. We realize an optical random number generator derived from the amplified spontaneous emission noise, apply noise-aware training by injecting additional noise and demonstrate the network's resilience to hardware non-idealities. Our results suggest the resilience and potential of more complex photonic generative networks based on large-scale, realistic photonic hardware.

cs.ET↗

arXiv2021

Programmable black phosphorus image sensor for broadband optoelectronic edge computing

Image sensors with internal computing capability enable in-sensor computing that can significantly reduce the communication latency and power consumption for machine vision in distributed systems and robotics. Two-dimensional semiconductors are uniquely advantageous in realizing such intelligent visionary sensors because of their tunable electrical and optical properties and amenability for heterogeneous integration. Here, we report a multifunctional infrared image sensor based on an array of black phosphorous programmable phototransistors (bP-PPT). By controlling the stored charges in the gate dielectric layers electrically and optically, the bP-PPT's electrical conductance and photoresponsivity can be locally or remotely programmed with high precision to implement an in-sensor convolutional neural network (CNN). The sensor array can receive optical images transmitted over a broad spectral range in the infrared and perform inference computation to process and recognize the images with 92% accuracy. The demonstrated multispectral infrared imaging and in-sensor computing with the black phosphorous optoelectronic sensor array can be scaled up to build a more complex visionary neural network, which will find many promising applications for distributed and remote multispectral sensing.

physics.app-ph↗

arXiv2021

Attack-Aware Synchronization-Free Data Timestamping in LoRaWAN

Low-power wide-area network technologies such as LoRaWAN are promising for collecting low-rate monitoring data from geographically distributed sensors, in which timestamping the sensor data is a critical system function. This paper considers a synchronization-free approach to timestamping LoRaWAN uplink data based on signal arrival time at the gateway, which well matches LoRaWAN's one-hop star topology and releases bandwidth from transmitting timestamps and synchronizing end devices' clocks at all times. However, we show that this approach is susceptible to a {\em frame delay attack} consisting of malicious frame collision and delayed replay. Real experiments show that the attack can affect the end devices in large areas up to about $50,000\,\text{m}^2$. In a broader sense, the attack threatens any system functions requiring timely deliveries of LoRaWAN frames. To address this threat, we propose a $\mathsf{LoRaTS}$ gateway design that integrates a commodity LoRaWAN gateway and a low-power software-defined radio receiver to track the inherent frequency biases of the end devices. Based on an analytic model of LoRa's chirp spread spectrum modulation, we develop signal processing algorithms to estimate the frequency biases with high accuracy beyond that achieved by LoRa's default demodulation. The accurate frequency bias tracking capability enables the detection of the attack that introduces additional frequency biases. We also investigate and implement a more crafty attack that uses advanced radio apparatuses to eliminate the frequency biases. To address this crafty attack, we propose a pseudorandom interval hopping scheme to enhance our frequency bias tracking approach. Extensive experiments show the effectiveness of our approach in deployments with real affecting factors such as temperature variations.

cs.NI↗

arXiv2021

Scaling optical computing in synthetic frequency dimension using integrated cavity acousto-optics

Optical computing with integrated photonics brings a pivotal paradigm shift to data-intensive computing technologies. However, the scaling of on-chip photonic architectures using spatially distributed schemes faces the challenge imposed by the fundamental limit of integration density. Synthetic dimensions of light offer the opportunity to extend the length of operand vectors within a single photonic component. Here, we show that large-scale, complex-valued matrix-vector multiplications on synthetic frequency lattices can be performed using an ultra-efficient, silicon-based nanophotonic cavity acousto-optic modulator. By harnessing the resonantly enhanced strong electro-optomechanical coupling, we achieve, in a single such modulator, the full-range phase-coherent frequency conversions across the entire synthetic lattice, which constitute a fully connected linear computing layer. Our demonstrations open up the route towards the experimental realizations of frequency-domain integrated optical computing systems simultaneously featuring very large-scale data processing and small device footprints.

physics.optics↗

arXiv2021

Direct Visualization of Gigahertz Acoustic Wave Propagation in Suspended Phononic Circuits

We report direct visualization of gigahertz-frequency Lamb waves propagation in aluminum nitride phononic circuits by transmission-mode microwave impedance microscopy (TMIM). Consistent with the finite-element modeling, the acoustic eigenmodes in both a horn-shaped coupler and a sub-wavelength waveguide are revealed in the TMIM images. Using fast Fourier transform filtering, we quantitatively analyze the acoustic loss of individual Lamb modes along the waveguide and the power coupling coefficient between the waveguide and the parabolic couplers. Our work provides insightful information on the propagation, mode conversion, and attenuation of acoustic waves in piezoelectric nanostructures, which is highly desirable for designing and optimizing phononic devices for microwave signal processing and quantum information transduction.

cond-mat.mes-hall↗

arXiv2020

On-the-fly Closed-loop Autonomous Materials Discovery via Bayesian Active Learning

Active learning - the field of machine learning (ML) dedicated to optimal experiment design, has played a part in science as far back as the 18th century when Laplace used it to guide his discovery of celestial mechanics [1]. In this work we focus a closed-loop, active learning-driven autonomous system on another major challenge, the discovery of advanced materials against the exceedingly complex synthesis-processes-structure-property landscape. We demonstrate autonomous research methodology (i.e. autonomous hypothesis definition and evaluation) that can place complex, advanced materials in reach, allowing scientists to fail smarter, learn faster, and spend less resources in their studies, while simultaneously improving trust in scientific results and machine learning tools. Additionally, this robot science enables science-over-the-network, reducing the economic impact of scientists being physically separated from their labs. We used the real-time closed-loop, autonomous system for materials exploration and optimization (CAMEO) at the synchrotron beamline to accelerate the fundamentally interconnected tasks of rapid phase mapping and property optimization, with each cycle taking seconds to minutes, resulting in the discovery of a novel epitaxial nanocomposite phase-change memory material.

cond-mat.mtrl-sci↗

arXiv2020

Refractive uses of layered and two-dimensional materials for integrated photonics

The scientific community has witnessed tremendous expansion of research on layered (i.e. two-dimensional, 2D) materials, with increasing recent focus on applications to photonics. Layered materials are particularly exciting for manipulating light in the confined geometry of photonic integrated circuits, where key material properties include strong and controllable light-matter interaction, and limited optical loss. Layered materials feature tunable optical properties, phases that are promising for electro-optics, and a panoply of polymorphs that suggest a rich design space for highly-nonperturbative photonic integrated devices based on phase-change functionality. All of these features are manifest in materials with band gap above the photonics-relevant near-infrared (NIR) spectral band ($\sim$ 0.5 - 1 eV), meaning that they can be harnessed in refractive (i.e. non-absorptive) applications.

cond-mat.mtrl-sci↗

arXiv2020

Programmable Phase-change Metasurfaces on Waveguides for Multimode Photonic Convolutional Neural Network

Neuromorphic photonics has recently emerged as a promising hardware accelerator, with significant potential speed and energy advantages over digital electronics, for machine learning algorithms such as neural networks of various types. Integrated photonic networks are particularly powerful in performing analog computing of matrix-vector multiplication (MVM) as they afford unparalleled speed and bandwidth density for data transmission. Incorporating nonvolatile phase-change materials in integrated photonic devices enables indispensable programming and in-memory computing capabilities for on-chip optical computing. Here, we demonstrate a multimode photonic computing core consisting of an array of programable mode converters based on metasurface made of phase-change materials. The programmable converters utilize the refractive index change of the phase-change material Ge-Sb-Te during phase transition to control the waveguide spatial modes with a very high precision of up 64 levels in modal contrast. This contrast is used to represent the matrix elements, with 6-bit resolution and both positive and negative values, to perform MVM computation in neural network algorithms. We demonstrate an optical convolutional neural network that can perform image processing and classification tasks with high accuracy. With a broad operation bandwidth and a compact device footprint, the demonstrated multimode photonic core is very promising toward a large-scale photonic processor for high-throughput optical neural networks.

physics.optics↗