arXiv subjects

Mohamed Farhat

Publications and source records attributed to Mohamed Farhat.

At least 19 recordsLinked to original sources

arXiv2026

Tunable Asymmetric Acoustic Absorption in Ventilated Metasurfaces

Asymmetric sound absorption is essential for advanced acoustic manipulation. However, current frequency modulation and broadbanding highly depend on geometric reconfiguration, leading to inevitable structural complexity that impedes their practical applications. Here, we propose a tunable, highly efficient, asymmetric ventilated acoustic system comprising two heterogeneous resonators. Specifically, it couples a highly dissipative space-coiling resonator (SCR) as a dark mode for energy consumption, alongside a weakly damped Helmholtz resonator as a bright mode acting as a reflective soft boundary. Theoretical and numerical analyses reveal strong asymmetry within the deep-subwavelength region (with a resonator size of approximately λ/9.4), achieving 99% absorption for left-incident waves and 98% reflection for right-incident ones. Furthermore, the SCR introduces an interesting degree of freedom for acoustic tuning. Simply rotating the resonator induces a 92% absorption drop (~11 dB attenuation), functioning as an "Acoustic Switch". Moreover, this rotation significantly shifts the operating band. By parallel-coupling multi-angle isomorphic resonators, we achieve efficient broadband absorption (>0.8) from 325 to 375 Hz, offering an attractive paradigm for tunable acoustic metasurfaces and ventilated absorbers.

physics.app-ph↗

arXiv2025

Broadband Low-Frequency Near-Perfect Sound Absorber via Coupled Metasurfaces

We propose a simple yet effective method for low-frequency broadband acoustic absorption. The absorber consists of two concentric space-coiling resonators with distinct resonance frequencies, with the inner resonator characterized by a low-quality factor (Q) and the outer resonator by a high Q factor. The coupling between the two resonators enables efficient broadband absorption within a deep-subwavelength range exceeding 15 times the structural thickness. Numerical simulations, theoretical analysis, and experimental measurements demonstrate that highly efficient (greater than 80 percent) low-frequency broadband absorption is achieved in the range of 198-315 Hz, as well as a 58 percent fractional bandwidth spanning 183-334 Hz. Furthermore, with the outer dimension fixed, adjusting the parameters of the internal resonators enables flexible tuning of the absorption band across a broad frequency range. This work presents a powerful design methodology that eliminates the need for traditional complex spatially arranged multi-resonator assemblies. By employing a single class of resonant units, thin and efficient broadband absorbers can be achieved, offering various application prospects in the field of low-frequency sound absorption.

physics.optics↗

arXiv2024

Vapor compression and energy dissipation in a collapsing laser-induced bubble

The composition of the gaseous phase of cavitation bubbles and its role on the collapse remains to date poorly understood. In this work, experiments of single cavitation bubbles in aqueous ammonia serve as a novel approach to investigate the effect of the vapor contained in a bubble on its collapse. We find that the higher vapor pressure of more concentrated aqueous ammonia acts as a resistance to the collapse, reducing the total energy dissipation. In line with visual observation, acoustic measurements, and luminescence recordings, it is also observed that higher vapor pressures contribute to a more spherical collapse, likely hindering the growth of interface instabilities by decreasing the collapse velocities and accelerations. Remarkably, we evidence a strong difference between the effective damping and the energy of the shock emission, suggesting that the latter is not the dominant dissipation mechanism at collapse as predicted from classical correction models accounting for slightly compressible liquids. Furthermore, our results suggest that the vapor inside collapsing bubbles gets compressed, consistently with previous studies performed in the context of single bubble sonoluminescence, addressing the question about the ability of vapors to readily condense during a bubble collapse in similar regimes. These findings provide insights into the identification of the influence of the bubble content and the energy exchanges of the bubble with its surrounding media, eventually paving the way to a more efficient use of cavitation in engineering and biomedical applications.

physics.flu-dyn↗

arXiv2024

GAN-driven Electromagnetic Imaging of 2-D Dielectric Scatterers

Inverse scattering problems are inherently challenging, given the fact they are ill-posed and nonlinear. This paper presents a powerful deep learning-based approach that relies on generative adversarial networks to accurately and efficiently reconstruct randomly-shaped two-dimensional dielectric objects from amplitudes of multi-frequency scattered electric fields. An adversarial autoencoder (AAE) is trained to learn to generate the scatterer's geometry from a lower-dimensional latent representation constrained to adhere to the Gaussian distribution. A cohesive inverse neural network (INN) framework is set up comprising a sequence of appropriately designed dense layers, the already-trained generator as well as a separately trained forward neural network. The images reconstructed at the output of the inverse network are validated through comparison with outputs from the forward neural network, addressing the non-uniqueness challenge inherent to electromagnetic (EM) imaging problems. The trained INN demonstrates an enhanced robustness, evidenced by a mean binary cross-entropy (BCE) loss of $0.13$ and a structure similarity index (SSI) of $0.90$. The study not only demonstrates a significant reduction in computational load, but also marks a substantial improvement over traditional objective-function-based methods. It contributes both to the fields of machine learning and EM imaging by offering a real-time quantitative imaging approach. The results obtained with the simulated data, for both training and testing, yield promising results and may open new avenues for radio-frequency inverse imaging.

eess.IV↗

arXiv2024

Observation of ultra-high-Q resonators in the ultrasound via bound states in the continuum

The confinement of waves in open systems represents a fundamental phenomenon extensively explored across various branches of wave physics. Recently, significant attention has been directed towards bound states in the continuum (BIC), a class of modes that are trapped but do not decay in an otherwise unbounded continuum. Here, we theoretically investigate and experimentally demonstrate the existence of quasi-BIC (QBIC) for ultrasonic waves by leveraging an elastic Fabry-Pérot metasurface resonator. We unveil several intriguing properties of the ultrasound QBIC that are robust to parameter scanning, and we present experimental evidence of a remarkable Q-factor of 350 at around 1 MHz frequency, far exceeding the state-of-the-art using a fully acoustic underwater system. Our findings contribute novel insights into the understanding of BIC for acoustic waves, offering a new paradigm for the design of efficient, ultra-high Q-factor ultrasound devices.

physics.app-ph↗

arXiv2024

Effects of non-condensable gas on laser-induced cavitation bubbles

This study presents experimental observations of single laser-induced cavitation bubbles collapsing in water with different levels of air saturation. The average trends of the bubble size reveal a clear yet little dependence of the energy dissipation at collapse on the water gas content. Similarly, the observed trend of luminescence energy at collapse varies within the investigated range of air saturation levels, in agreement with findings in similar works. We argue that perturbations in bubble shape may amplify with decreasing air saturation, consequently affecting light emission.

physics.flu-dyn↗

arXiv2022

Sound Waveguiding by Spinning: An Avenue towards Unidirectional Acoustic Spinning Fibers

Waveguiding in general and acoustic waveguiding in particular are possible at the condition of having a transverse "discontinuity" or modulation of the refractive index. We propose here a radically different approach that relies on imposing spinning on a column of air, leading to high modified acoustic refractive indices for specific azimuthal modes. Such discovery may be leveraged to realize not only the airborne acoustic counterpart of the optical fiber, i.e., the acoustic spinning fiber (ASF), but also nonreciprocal unidirectional waveguiding mechanism, reminiscent of the ''acoustic Zeeman effect''. The concept is demonstrated in the realm of acoustics, yet it can be applicable to other wave systems, e.g., photonics or elastodynamics.

physics.class-ph↗

arXiv2020

Deterministic and probabilistic deep learning models for inverse design of broadband acoustic cloak

Concealing an object from incoming waves (light and/or sound) remained science fiction for a long time due to the absence of wave-shielding materials in nature. Yet, the invention of artificial materials and new physical principles for optical and sound wave manipulation translated this abstract concept into reality by making an object acoustically invisible. Here, we present the notion of a machine learning-driven acoustic cloak and demonstrate an example of such a cloak with a multilayered core-shell configuration. Importantly, we develop deterministic and probabilistic deep learning models based on autoencoder-like neural network structure to retrieve the structural and material properties of the cloaking shell surrounding the object that suppresses scattering of sound in a broad spectral range, as if it was not there. The probabilistic model enhances the generalization ability of design procedure and uncovers the sensitivity of the cloak parameters on the spectral response for practical implementation. This proposal opens up new avenues to expedite the design of intelligent cloaking devices for tailored spectral response and offers a feasible solution for inverse scattering problems.

physics.app-ph↗

arXiv2020

Scattering Cancellation Technique for Acoustic Spinning Objects

The scattering cancellation technique (SCT) has proved to be an effective way to render static objects invisible to electromagnetic and acoustic waves. However, rotating cylindrical or spherical objects possess additional peculiar scattering features that cannot be cancelled by regular SCT-based cloaks. Here, a generalized SCT theory to cloak spinning objects, and hide them from static observers, based on rotating shells with different angular velocity is discussed. This concept is analytically and numerically demonstrated in the case of cylinders, showing that generalized SCT operates efficiently in making rotating objects appear static to an external observer. Our proposal extends the realm of SCT, and brings it one step closer to its practical realization that involves moving objects.

physics.class-ph↗

arXiv2019

Scattering theory and cancellation of gravity-flexural waves of floating plates

We combine theories of scattering for linearized water waves and flexural waves in thin plates to characterize and achieve control of water wave scattering using floating plates. This requires manipulating a sixth-order partial differential equation with appropriate boundary conditions of the velocity potential. Making use of multipole expansions, we reduce the scattering problem to a linear algebraic system. The response of a floating plate in the quasistatic limit simplifies, considering a distinct behavior for water and flexural waves. Unlike similar studies in electromagnetics and acoustics, scattering of gravity-flexural waves is dominated by the zeroth-order multipole term and this results in non-vanishing scattering cross-section also in the zero-frequency limit. Potential applications lie in floating structures manipulating ocean waves.

physics.class-ph↗

arXiv2019

The influence of building interactions on seismic and elastic surface waves

We outline some recent research advances on the control of elastic waves in thin and thick plates, that have occurred since the large scale experiment [Phys. Rev. Lett. 112, 133901, 2014] that demonstrated significant interaction of surface seismic waves with holes structuring sedimentary soils at the meter scale. We further investigate the seismic wave trajectories in soils structured with buildings. A significant substitution of soils by inclusions, acting as foundations, raises the question of the effective dynamic properties of these structured soils. Buildings, in the case of perfect elastic conditions for both soil and buildings, are shown to interact and strongly influence elastic surface waves; such site-city seismic interactions were pointed out in [Bulletin of Seismological Society of America 92, 794-811, 2002], and we investigate a variety of scenarios to illustrate the variety of behaviours possible.

physics.class-ph↗

arXiv2018

Rebounds of deformed cavitation bubbles

Presented here are experiments clarifying how the deformation of cavitation bubbles affects their rebound. Rebound bubbles carry the remaining energy of a bubble following its initial collapse, which dissipates energy mainly through shock waves, jets, and heat. The rebound bubble undergoes its own collapse, generating such violent events anew, which can be even more damaging or effective than at first bubble collapse. However, modeling rebound bubbles is an ongoing challenge because of the lack of knowledge on the exact factors affecting their formation. Here we use single-laser-induced cavitation bubbles and deform them by variable gravity or by a neighboring free surface to quantify the effect of bubble deformation on the rebound bubbles. Within a wide range of deformations, the energy of the rebound bubble follows a logarithmic increase with the bubble's initial dipole deformation, regardless of the origin of this deformation.

physics.flu-dyn↗

arXiv2017

Luminescence from cavitation bubbles deformed in uniform pressure gradients

Presented here are observations that demonstrate how the deformation of millimetric cavitation bubbles by a uniform pressure gradient quenches single collapse luminescence. Our innovative measurement system captures a broad luminescence spectrum (wavelength range 300-900 nm) from the individual collapses of laser-induced bubbles in water. By varying the bubble size, driving pressure and the perceived gravity level aboard parabolic flights, we probed the limit from aspherical to highly spherical bubble collapses. Luminescence was detected for bubbles of maximum radii within the previously uncovered range $R_{0}$ =1.5-6 mm for laser-induced bubbles. The relative luminescence energy was found to rapidly decrease as a function of bubble asymmetry quantified by the anisotropy parameter $ζ$, which is the dimensionless equivalent of the Kelvin impulse. As established previously, $ζ$ also dictates the characteristic parameters of bubble-driven microjets. The threshold of $ζ$ beyond which no luminescence is observed in our experiment closely coincides with the threshold where the microjets visibly pierce the bubble and drive a vapor-jet during the rebound. The individual fitted blackbody temperatures range between $T_{\rm lum}$=7000 and 11500 K but do not show any clear trend as a function of $ζ$. Time-resolved measurements using a high-speed photodetector disclose multiple luminescence events at each bubble collapse. The averaged full width at half maximum of the pulse is found to scale with $R_{0}$ and to range between 10-20 ns.

physics.flu-dyn↗

arXiv2017

Shock waves from non-spherical cavitation bubbles

We present detailed observations of the shock waves emitted at the collapse of single cavitation bubbles using simultaneous time-resolved shadowgraphy and hydrophone pressure measurements. The geometry of the bubbles is systematically varied from spherical to very non-spherical by decreasing their distance to a free or rigid surface or by modulating the gravity-induced pressure gradient aboard parabolic flights. The non-spherical collapse produces multiple shocks that are clearly associated with different processes, such as the jet impact and the individual collapses of the distinct bubble segments. For bubbles collapsing near a free surface, the energy and timing of each shock are measured separately as a function of the anisotropy parameter $ζ$, which represents the dimensionless equivalent of the Kelvin impulse. For a given source of bubble deformation (free surface, rigid surface or gravity), the normalized shock energy depends only on $ζ$, irrespective of the bubble radius $R_{0}$ and driving pressure $Δp$. Based on this finding, we develop a predictive framework for the peak pressure and energy of shock waves from non-spherical bubble collapses. Combining statistical analysis of the experimental data with theoretical derivations, we find that the shock peak pressures can be estimated as jet impact-induced hammer pressures, expressed as $p_{h} = 0.45\left(ρc^{2}Δp\right)^{1/2} ζ^{-1}$ at $ζ> 10^{-3}$. The same approach is found to explain the shock energy quenching as a function of $ζ^{-2/3}$.

physics.flu-dyn↗

arXiv2017

Cloaking and anamorphism for light and mass diffusion

We first review classical results on cloaking and mirage effects for electromagnetic waves. We then show that transformation optics allows the masking of objects or produces mirages in diffusive regimes. In order to achieve this, we consider the equation for diffusive photon density in transformed coordinates, which is valid for diffusive light in scattering media. More precisely, generalizing transformations for star domains introduced in [Diatta and Guenneau, J. Opt. 13, 024012, 2011] for matter waves, we numerically demonstrate that infinite conducting objects of different shapes scatter diffusive light in exactly the same way. We also propose a design of external light-diffusion cloak with spatially varying sign-shifting parameters that hides a finite size scatterer outside the cloak. We next analyse non-physical parameter in the transformed Fick's equation derived in [Guenneau and Puvirajesinghe, R. Soc. Interface 10, 20130106, 2013], and propose to use a non-linear transform that overcomes this problem. We finally investigate other form invariant transformed diffusion-like equations in the time domain, and touch upon conformal mappings and non-Euclidean cloaking applied to diffusion processes.

physics.optics↗

arXiv2017

Scaling laws for jets of single cavitation bubbles

Fast liquid jets, called micro-jets, are produced within cavitation bubbles experiencing an aspherical collapse. Here we review micro-jets of different origins, scales and appearances, and propose a unified framework to describe their dynamics by using an anisotropy parameter $ζ$, representing a dimensionless measure of the liquid momentum at the collapse point (Kelvin impulse). This parameter is rigorously defined for various jet drivers, including gravity and nearby boundaries. Combining theoretical considerations with hundreds of high-speed visualisations of bubbles collapsing near a rigid surface, near a free surface or in variable gravity, we classify the jets into three distinct regimes: weak, intermediate and strong. Weak jets ($ζ<10^{-3}$) hardly pierce the bubble, but remain within it throughout the collapse and rebound. Intermediate jets ($10^{-3}<ζ<0.1$) pierce the opposite bubble wall close to the last collapse phase and clearly emerge during the rebound. Strong jets ($ζ>0.1$) pierce the bubble early during the collapse. The dynamics of the jets is analysed through key observables, such as the jet impact time, jet speed, bubble displacement, bubble volume at jet impact and vapour-jet volume. We find that, upon normalising these observables to dimensionless jet parameters, they all reduce to straightforward functions of $ζ$, which we can reproduce numerically using potential flow theory. An interesting consequence of this result is that a measurement of a single observable, such as the bubble displacement, suffices to estimate any other parameter, such as the jet speed. Remarkably, the dimensionless parameters of intermediate and weak jets only depend on $ζ$, not on the jet driver. In the same regime, the jet parameters are found to be well approximated by power-laws of $ζ$, which we explain through analytical arguments.

physics.flu-dyn↗

arXiv2016

Theory of diffusive light scattering cancellation cloaking

We report on a new concept of cloaking objects in diffusive light regime using the paradigm of the scattering cancellation and mantle cloaking techniques. We show numerically that an object can be made completely invisible to diffusive photon density waves, by tailoring the diffusivity constant of the spherical shell enclosing the object. This means that photons' flow outside the object and the cloak made of these spherical shells behaves as if the object were not present. Diffusive light invisibility may open new vistas in hiding hot spots in infrared thermography or tissue imaging.

physics.optics↗

arXiv2014

Surface wave dynamics in orbital shaken cylindrical containers

Be it to aerate a glass of wine before tasting, to accelerate a chemical reaction or to cultivate cells in suspension, the "swirling" (or orbital shaking) of a container ensures good mixing and gas exchange in an efficient and simple way. Despite being used in a large range of applications this intuitive motion is far from being understood and presents a richness of patterns and behaviors which has not yet been reported. The present research charts the evolution of the waves with the operating parameters identifying a large variety of patterns, ranging from single and multiple crested waves to breaking waves. Free surface and velocity fields measurements are compared to a potential sloshing model, highlighting the existence of various flow regimes. Our research assesses the importance of the modal response of the shaken liquids, laying the foundations for a rigorous mixing optimization of the orbital agitation in its applications. Copyright (2014) American Institute of Physics. This article may be downloaded for personal use only. Any other use requires prior permission of the author and the American Institute of Physics. The following article appeared in Physics of Fluids 26, 052104 (2014) and may be found at http://dx.doi.org/10.1063/1.4874612

physics.flu-dyn↗