arXiv subjects

Mohamed Goune

Publications and source records attributed to Mohamed Goune.

4 recordsLinked to original sources

arXiv2026

Improvement of piezocatalytic performance of Na0.5Bi0.5TiO3 perovskite using K doping for efficient Rhodamine B degradation

Piezocatalysis, based on the piezoelectric properties of catalysts, breaks down the barrier between mechanical energy and chemical energy. It describes the use of charges induced by piezoelectricity to assist typical chemical processes while harvesting various forms of mechanical green energy. The performance of piezocatalysis is predominantly governed by the piezoelectric properties of materials. The main aim of this work is to evaluate and analyze the potential of potassium doped sodium bismuth titanate Na0.5-xKxBi0.5TiO3 abbreviated as NKxBT (0, 0.15, 0.20, and 0.25), as a piezocatalyst in the degradation of the organic dye Rhodamine B RhB under ultrasonic vibration. The synthesis of NKxBT nanopowders was conducted using the sol-gel autocombustion method. Coupled structural analysis reveals the presence of an intermediate Morphotropic Phase Boundary (MPB, where two phases coexist) in the optimal NK15BT composition. The piezocatalytic degradation results showed a total piezo-degradation in only 90 min and a rate constant 8 times higher than the undoped NK0BT. The enhanced piezocatalytic activity results from a synergistic effect of MPB presence, reduced particle size, optimal bandgap and high lattice strain. The NK15BT sample also demonstrated good reusability and good mineralization.

cond-mat.mtrl-sci↗

arXiv2026

Rapid and Highly Efficient Synergistic Sonophotocatalytic Degradation of Methyl Orange with CuDoped LaFeO3 Perovskite Nanoparticles

The integration of sonocatalysis with photocatalysis offers a powerful strategy for advanced wastewater treatment by overcoming rapid charge carrier recombination in conventional photocatalytic systems. Although these processes are often treated separately due to their distinct mechanisms, their combination creates a highly efficient synergistic system. In this study, we investigate the sonophotocatalytic degradation of methyl orange (MO) using Cu-doped LaFeO3 perovskite nanoparticles. The Cu doped catalyst demonstrated excellent performance, achieving a degradation rate of 0.0455 min-1 and complete removal of MO within 120 minutes under combined ultrasonic and light irradiation. A strong synergistic effect was observed, with a synergy index of approximately 10, highlighting the enhanced interaction between sonocatalysis and photocatalysis. The catalyst also exhibited good stability and reusability, maintaining high efficiency over four consecutive cycles. Mechanistic studies using scavenger experiments revealed that hydroxyl radicals and photogenerated holes are the main reactive species responsible for degradation. A plausible reaction pathway is proposed based on these findings. Overall, Cu doped LaFeO3 shows superior sonophotocatalytic activity compared to the undoped material, demonstrating the potential of synergistic sonophotocatalytic processes for efficient pollutant removal.

cond-mat.mtrl-sci↗

arXiv2020

Structural, Dielectric and Ferroelectric Properties of Lead-free BCZT Ceramics Elaborated by Low-temperature Hydrothermal Processing

Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramics have demonstrated excellent dielectric, ferroelectric and piezoelectric properties in comparison to lead-based materials. The synthesis of pure and crystalline BCZT nanopowders at low temperatures of 25, 80 and 160 C was reported previously by using a sol-gel method followed by a hydrothermal route. In this study, the structural, dielectric and ferroelectric properties of sintered BCZT ceramics at 1250 °C for 10h were investigated. XRD measurements revealed the presence of a single perovskite phase at room temperature with the coexistence of the orthorhombic and tetragonal symmetries. The increase of grain size and the ceramic density in BCZT ceramics result in an enhancement of the dielectric and ferroelectric properties of BCZT ceramics. More interestingly, the synthesis temperature of BCZT powders with high dielectric and ferroelectric properties could be decreased to a low temperature of 160 °C, which is about 1200 °C lower when compared with solid-state reaction and 840 °C lower when compared with sol-gel methods. The BCZT ceramics elaborated at 160 °C revealed excellent electrical properties. Hence, the use of low-temperature hydrothermal processing can be encouraging for the synthesis of lead-free ceramics with high dielectric and ferroelectric properties.

cond-mat.mtrl-sci↗

arXiv2019

Phase transitions, energy storage performances and electrocaloric effect of the lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 ceramic relaxor

Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramic exhibits excellent dielectric, ferroelectric and piezoelectric properties at the Morphotropic Phase Boundary (MPB). Previously, we demonstrated that the use of the anionic surfactant Sodium Dodecyl Sulfate (SDS, NaC12H25SO4) could enhance the dielectric properties of BCZT ceramic using surfactant-assisted solvothermal processing [1]. In the present study, structural, dielectric, ferroelectric properties, as well as electrocaloric effect and energy storage performances of this BCZT ceramic were thoroughly investigated. X-ray diffraction (XRD) measurements revealed the presence of single perovskite phase at room temperature with the coexistence of orthorhombic and tetragonal symmetries. In-situ Raman spectroscopy results confirmed the existence of all phase transitions from rhombohedral through orthorhombic and tetragonal to cubic symmetries when the temperature varies as reported in undoped-BaTiO3. Evolution of energy storage performances with temperature have been investigated. BCZT ceramic exhibits a high energy storage efficiency of ~80% at 120 °C. In addition, the electrocaloric responsivity was found to be 0.164.10-6 K.m/V at 360 K.

cond-mat.mtrl-sci↗