arXiv subjects

Mohamed Mezouar

Publications and source records attributed to Mohamed Mezouar.

At least 19 recordsLinked to original sources

arXiv2026

Observation of hexagonal close-packed water ice at conditions in ice giant planetary interiors

Using synchrotron x-ray diffraction in laser-heated diamond anvil cells, we report the observation of an hexagonal close-packed (hcp) phase of water ice at high pressure and temperature conditions. Above 200 GPa and 1800 K, the hcp phase becomes dominant upon entering the superionic regime, as evidenced by anomalous thermal expansion. Observations are consistent with the hcp phase becoming thermodynamically more stable than the face-centered cubic (fcc) phase via a martensitic transition extending across the 130 - 200 GPa pressure range, within the superionic regime. Hcp ice is also observed to emerge from stacking disorder developing within the fcc oxygen lattice upon cooling, during its reversion to the bcc phase. The presence of an fcc-hcp martensitic transition in the superionic regime of warm dense ice may have implications for planetary models of Uranus and Neptune.

cond-mat.mtrl-sci↗

arXiv2026

Synthesis and stability of high-$T_c$ LaH$_{10\pmδ}$ films at high pressures

High-pressure hydrides hold the record for the highest superconducting critical temperatures across all classes of superconductors. Currently lanthanum decahydride, LaH$_{10}$, exhibits the highest critical temperature among binaries, with $T_c \approx$ 250 K at pressures between 140-180 GPa. Here, we report the synthesis of LaH$_{10\pmδ}$ films in two DACs at pressures of 168 GPa and 176 GPa via in situ laser heating of elemental lanthanum films with ammonia borane (NH$_3$BH$_3$) as the hydrogen donor. The high-symmetry fcc lanthanum sublattice (space group $Fm\bar3m$) is resolved using synchrotron X-ray diffraction, with unit cell parameters in excellent agreement with previous studies on bulk samples. We provide confirmation of high-$T_c$ superconductivity in LaH$_{10\pmδ}$ with highest $T_c$ of 247 K at 176 GPa evidenced in electrical measurements. The characteristic suppression of superconductivity is observed in magnetic fields. Furthermore, combined diffraction and electrical measurements reveal remarkable temporal stability of both the crystal structure and the high-$T_c$ superconductivity over the full measurement period of about 300 days post laser heating. Our work establishes film precursors using physical vapour deposition (PVD) techniques as a practical route to hydride formation, opening a pathway toward the controlled synthesis of promising ternary hydrides and the integration of micro-fabricated device geometries in diamond anvil cells.

cond-mat.supr-con↗

arXiv2025

Emergence of multiple relaxation processes during low to high density transition in Au49Cu26.9Si16.3Ag5.5Pd2.3 metallic glass

The existence of multiple amorphous states, or polyamorphism, remains one of the most debated phenomena in disordered matter, particularly regarding its microscopic origin and impact on glassy dynamics. Profiting of the enhanced data quality provided by brilliant synchrotrons, we combined high pressure X-ray photon correlation spectroscopy and X-ray diffraction to investigate the atomic dynamics-structure relationship in a Au49Cu26.9Si16.3Ag5.5Pd2.3 metallic glass at room temperature. We identify a structural and dynamical crossover near 3 GPa, marked by avalanches-like massive atomic rearrangements that promote the system toward increasingly compact atomic cluster connections. This crossover superimposes to a pressure-induced acceleration of the atomic motion recently reported, and signals the onset of a transitional state, potentially linked to the nucleation of a new phase within the glass, characterized by the coexistence of two amorphous states with distinct relaxation processes. These results provide evidence for a sluggish, continuous polyamorphic transformation, even in absence of marked structural discontinuities.

cond-mat.mtrl-sci↗

arXiv2025

An underdog story: Re-emergence of a polar instability at high pressure in KNbO3

Ferroelectricity in perovskites is known to be suppressed by a moderate hydrostatic pressure. The notion that a polar instability should reappear in a higher pressure regime is well accepted theoretically but experiments have failed so far to provide a conclusive evidence for it. Here, we investigate a classical but comparatively underlooked ferroelectric perovskite KNbO3. We use single crystal X-ray diffraction, infrared and Raman spectroscopy and second-harmonic generation to explore the phase transition sequence at high pressures up to 63 GPa. We show that the ferroelectric instability manifests itself in the emergence of an incommensurate modulation of the perovskite structure that combines cation displacements and tilts of the oxygen octahedra. Soft modes associated to the tilts and the modulation are clearly observed along with persistent order-disorder signatures. This demonstrates the presence of the high-pressure polar instability in a lead-free perovskite in spite of the centrosymmetric character of all observed high-pressure phases.

cond-mat.mtrl-sci↗

arXiv2025

Long-Term Stability of Superconducting Metal Superhydrides

Zhou et al., in their recent publication (Nat. Commun. 16, 1135, 2025), reported the synthesis of lanthanum superhydride, LaHx (x = 10.2-11.1), by laser heating LaH3 with NH3BH3 at a pressure of 170 GPa and investigated the temporal evolution of the NMR spectra of the reaction products. They observed a gradual decrease in the 1H-NMR signal intensity assigned to the synthesized metal hydride, accompanied by an increase in molecular hydrogen within the sample chamber over a period of 50 days. Based on these observations, the authors concluded that LaH10 progressively decomposes into LaH3 and H2 within two months after synthesis at its formation pressure of 170 GPa. Here, we demonstrate that, under their formation conditions, metal superhydrides are thermodynamically more stable than metal trihydrides. Furthermore, we present direct experimental evidence - based on X-ray diffraction and four-probe electrical resistance measurements - confirming the stability of both the crystal lattice and high-temperature superconducting properties of the Fm-3m-LaH10 phase for more than five years. This long-term stability is consistent with predictions from quantum chemistry calculations.

cond-mat.supr-con↗

arXiv2025

Prediction and Synthesis of Mg$_4$Pt$_3$H$_6$: A Metallic Complex Transition Metal Hydride Stabilized at Ambient Pressure

The low-pressure stabilization of superconducting hydrides with high critical temperatures ($T_c$s) remains a significant challenge, and experimentally verified superconducting hydrides are generally constrained to a limited number of structural prototypes. Ternary transition-metal complex hydrides (hydrido complexes)-typically regarded as hydrogen storage materials-exhibit a large range of compounds stabilized at low pressure with recent predictions for high-$T_c$ superconductivity. Motivated by this class of materials, we investigated complex hydride formation in the Mg-Pt-H system, which has no known ternary hydride compounds. Guided by ab initio structural predictions, we successfully synthesized a novel complex transition-metal hydride, Mg$_4$Pt$_3$H$_6$, using laser-heated diamond anvil cells. The compound forms in a body-centered cubic structural prototype at moderate pressures between 8-25 GPa. Unlike the majority of known hydrido complexes, Mg$_4$Pt$_3$H$_6$ is metallic, with formal charge described as 4[Mg]$^{2+}$.3[PtH$_2$]$^{2-}$. X-ray diffraction (XRD) measurements obtained during decompression reveal that Mg$_4$Pt$_3$H$_6$ remains stable upon quenching to ambient conditions. Magnetic-field and temperature-dependent electrical transport measurements indicate ambient-pressure superconductivity with $T_c$ (50%) = 2.9 K, in reasonable agreement with theoretical calculations. These findings clarify the phase behavior in the Mg-Pt-H system and provide valuable insights for transition-metal complex hydrides as a new class of hydrogen-rich superconductors.

cond-mat.supr-con↗

arXiv2025

Hydrogen-rich hydrate at high pressures up to 104 GPa

Gas hydrates are considered fundamental building blocks of giant icy planets like Neptune and similar exoplanets. The existence of these materials in the interiors of giant icy planets, which are subject to high pressures and temperatures, depends on their stability relative to their constituent components. In this study, we reexamine the structural stability and hydrogen content of hydrogen hydrates, (H2O)(H2)n, up to 104 GPa, focusing on hydrogen-rich materials. Using synchrotron single-crystal X-ray diffraction, Raman spectroscopy, and first-principles theoretical calculations, we find that the C2-filled ice phase undergoes a transformation to C3-filled ice phase over a broad pressure range of 47 - 104 GPa at room temperature. The C3 phase contains twice as much molecular H2 as the C2 phase. Heating the C2-filled ice above approximately 1500 K induces the transition to the C3 phase at pressures as low as 47 GPa. Upon decompression, this phase remains metastable down to 40 GPa. These findings establish new stability limits for hydrates, with implications for hydrogen storage and the interiors of planetary bodies.

cond-mat.mtrl-sci↗

arXiv2024

Polymorphism of monatomic iodine

We applied synchrotron single-crystal X-ray diffraction in a diamond anvil cell at 48-51 GPa and first-principles theoretical calculations to study the crystal structure of solid atomic iodine at high pressure. We report the synthesis of two phases of atomic iodine at 48-51 GPa via laser heating of I-N2 mixtures. Unlike the familiar monatomic I4/mmm structure, which consists of crystallographically equivalent atoms, a new Pm-3n structure is of inclusion type, featuring two distinct kinds of atoms: a central detached one and peripheral ones forming the linear chains. Moreover, we observe crystallization of the familiar high-pressure face centered cubic (fcc) structure, albeit at much lower pressures compared to cold compressed iodine. The discovery of Pm-3n structure in iodine marks an important step in understanding of the pressure induced phase transition sequence in halogens.

cond-mat.mtrl-sci↗

arXiv2024

Experimental and theoretical confirmation of an orthorhombic phase transition in niobium at high pressure and temperature

Compared to other body-centered cubic (bcc) transition metals Nb has been the subject of fewer compression studies and there are still aspects of its phase diagram which are unclear. Here, we report a combined theoretical and experimental study of Nb under high pressure and temperature. We present the results of static laser-heated diamond anvil cell experiments up to 120 GPa using synchrotron-based fast x-ray diffraction combined with ab initio quantum molecular dynamics simulations. The melting curve of Nb is determined, and evidence for a solid-solid phase transformation in Nb with increasing temperature is found. The high-temperature phase of Nb is orthorhombic Pnma. The bcc-Pnma transition is clearly seen in the experimental data on the Nb principal Hugoniot. The bcc-Pnma coexistence observed in our experiments is explained. Agreement between the measured and calculated melting curves is very good except at 40-60 GPa where three experimental points lie below the theoretical melting curve by 250 K (or 7%); a possible explanation is given.

cond-mat.mtrl-sci↗

arXiv2023

Melting curve of black phosphorus: evidence for a solid-liquid-liquid triple point

Black phosphorus (bP) is a crystalline material that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. The knowledge of its pressure-temperature (P-T) phase diagram, and in particular, the slope and location of its melting curve is fundamental for better understanding the synthesis and stability conditions of this important material. Despite several experimental studies, important uncertainties remain in the determination of this melting curve. Here we report accurate melting points measurements, using in situ high-temperature and high-pressure high-resolution synchrotron x-ray diffraction. In particular, we have employed an original and accurate pressure and temperature metrology based on the unique anisotropic P-T response of bP, that we used as sensor for the simultaneous determination of pressure and temperature up to 5 GPa and 1700 K. We confirmed the existence of and located a solid-liquid-liquid triple point at the intersection of the low- and high-pressure melting curves. Finally, we have characterized the irreversibility of the transformation in the low-pressure regime below 1 GPa, as the low-density liquid does not crystallize back to bP but into red phosphorus on temperature quenching.

cond-mat.mtrl-sci↗

arXiv2023

Anisotropic thermo-mechanical response of layered hexagonal boron nitride and black phosphorus: application as a simultaneous pressure and temperature sensor

Hexagonal boron nitride (hBN) and black phosphorus (bP) are crystalline materials that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. The knowledge of the thermal equations of state of hBN and bP is of great interest in the field of 2D materials for a better understanding of the anisotropic thermo-mechanical properties and exfoliation mechanism of these materials. Despite several theoretical and experimental studies, important uncertainties remain in the determination of the thermoelastic parameters of hBN and bP. Here, we report accurate thermal expansion and compressibility measurements along the individual crystallographic axes, using in situ high-temperature and high-pressure high-resolution synchrotron X-ray diffraction. In particular, we have quantitatively determined the subtle variations of the in-plane thermo-mechanical parameters by subjecting these materials to hydrostatic pressure conditions and collecting a large number of data points in small pressure and temperature increments. Based on the anisotropic behavior of bP, we propose the use of this material as sensor for the simultaneous determination of pressure and temperature in the range 0-5 GPa, 298-1700 K.

cond-mat.mtrl-sci↗

arXiv2022

Synthesis of Ultra-Incompressible Carbon Nitrides Featuring Three-Dimensional Frameworks of CN4 Tetrahedra Recoverable at Ambient Conditions

More than thirty years ago, carbon nitrides featuring 3D frameworks of tetrahedral CN4 units were identified as one of the great aspirations of materials science, expected to have a hardness greater than or comparable to diamond. Since then, no unambiguous experimental evidence of their existence has been delivered. Here, we report the high-pressure high-temperature synthesis of the long-sought-after covalent carbon nitrides, tI14-C3N4, hP126-C3N4, and tI24-CN2, in laser-heated diamond anvil cells. Their structures were solved and refined using synchrotron single-crystal X-ray diffraction. In these solids, carbon atoms, all sp3-hybridized, and nitrogen atoms are fully saturated, forming four and three covalent bonds, respectively, leading to three-dimensional arrangements of corner-sharing CN4 tetrahedra. These carbon nitrides are ultra-incompressible, with hP126-C3N4 and tI24-CN2 even rivalling diamond's incompressibility, and superhard. These novel compounds are recoverable to ambient conditions in crystalline form and chemically stable in air. Being wide-band gap semiconductors with intriguing features in their electronic structure, they are expected to exhibit multiple exceptional functionalities besides their mechanical properties, opening new perspectives for materials science.

cond-mat.mtrl-sci↗

arXiv2018

Boron monosulfide: equation of state and pressure-induced phase transition

Quasi-hydrostatic compression of rhombohedral boron monosulfide (r-BS) has been studied up to 50 GPa at room temperature using diamond-anvil cells and angle-dispersive synchrotron X-ray diffraction. A fit of the experimental P-V data to the Vinet equation of state yields bulk modulus of 42.2(1.4) GPa and its first pressure derivative of 7.6(2) that are in excellent agreement with our ab initio calculations. Formation of a new high-pressure phase of boron monosulfide (hp-BS) has been observed above 35 GPa. According to ab initio evolutionary crystal structure predictions combined with Rietveld refinement of high-pressure X-ray diffraction data, the structure of hp-BS has trigonal symmetry and belongs to the space group P-3m1. As it follows from electron density of states calculations, the phase transformation is accompanied by an insulator-metal transition.

cond-mat.mtrl-sci↗

arXiv2017

A density-driven first-order phase transition in liquid sulfur

First-order phase transitions are characterized by a discontinuous first derivative of the Gibbs free energy, so that volumes and entropies are discontinuous. Such transitions are common in the crystalline state, but extremely rare in liquid substances and experimentally evidenced in only one pure element, phosphorus. Here we report combined in-situ Raman scattering, X-ray diffraction and density measurements that support the existence of a first-order liquid-liquid transition in sulfur at high pressures and temperatures. The transformation involves a sharp density jump between two structurally and dynamically distinct liquids. The first-order phase transition proceeds through an initial stage of temperature induced polymerization and a final stage where the low-density liquid abruptly converts to a denser polymeric state. This unique feature is explained by competing effects of pressure and temperature.

cond-mat.mtrl-sci↗

arXiv2017

First non-icosahedral boron allotrope synthesized at high pressure and high temperature

Theoretical predictions of pressure-induced phase transformations often become long-standing enigmas because of limitations of contemporary available experimental possibilities. Hitherto the existence of a non-icosahedral boron allotrope has been one of them. Here we report on the first non-icosahedral boron allotrope, which we denoted as ζ-B, with the orthorhombic α-Ga-type structure (space group Cmce) synthesized in a diamond anvil cell at extreme high-pressure high-temperature conditions (115 GPa and 2100 K). The structure of ζ-B was solved using single-crystal synchrotron X-ray diffraction and its compressional behavior was studied in the range of very high pressures (115 GPa to 135 GPa). Experimental validation of theoretical predictions reveals the degree of our up-to-date comprehension of condensed matter and promotes further development of the solid state physics and chemistry.

cond-mat.mtrl-sci↗

arXiv2016

Orthorhombic boron oxide under pressure: in situ study by X-ray diffraction and Raman scattering

High-pressure phase of boron oxide, orthorhombic \b{eta}-B2O3, has been studied in situ by synchrotron X-ray diffraction to 22 GPa and Raman scattering to 46 GPa at room temperature. The bulk modulus of \b{eta}-B2O3 has been found to be 169(3) GPa that is in good agreement with our ab initio calculations. Raman and IR spectra of \b{eta}-B2O3 have been measured at ambient pressure, all experimentally observed bands have been attributed to the theoretically calculated ones, and the mode assignment has been performed. Based on the data on Raman shift as a function of pressure, combined with equation-of-state data, the Grüneisen parameters of all experimentally observed Raman bands have been calculated. \b{eta}-B2O3 enriched by 10B isotope has been synthesized, and the effect of boron isotopic substitution on Raman spectra has been studied.

cond-mat.mtrl-sci↗

arXiv2016

Phase boundary between Na-Si clathrates of structures I and II at high pressures and high temperatures

Understanding the covalent clathrate formation is a crucial point for the design of new superhard materials with intrinsic coupling of superhardness and metallic conductivity. Silicon clathrates have the archetype structures that can serve an existant model compounds for superhard clathrate frameworks "Si-B", "Si-C", "B-C" and "C" with intercalated atoms (e.g. alkali metals or even halogenes) that can assure the metalic properties. Here we report the in situ and ex situ studies of high-pressure formation and stability of clathrates Na8Si46 (structure I) and Na24+xSi136 (structure II). Experiments have been performed using standard Paris-Edinburgh cells (opposite anvils) up to 6 GPa and 1500 K. We have established that chemical interactions in Na-Si system and transition between two structures of clathrates occur at temperatures below silicon melting. The strong sensitivity of crystallization products to the sodium concentration have been observed. A tentative diagram of clathrate transformations has been proposed. At least up to ~6 GPa, Na24+xSi136 (structure II) is stable at lower temperatures as compared to Na8Si46 (structure I).

cond-mat.mtrl-sci↗

arXiv2014

Equation of state of single-crystal cubic boron phosphide

The 300 K equation of state of cubic (zinc-blende) boron phosphide BP has been studied by in situ single-crystal X-ray diffraction with synchrotron radiation up to 55 GPa. The measurements have been performed under quasi-hydrostatic conditions using a Ne pressure medium in a diamond anvil cell. A fit of the experimental p-V data to the Vinet equation of state yields the bulk modulus B0 of 179(1) GPa with its pressure derivative of 3.3(1). These values are in a good agreement with previous elastic measurements, as well as with semiempirical estimations.

cond-mat.mtrl-sci↗