arXiv subjects

Mohammad Mehboudi

Publications and source records attributed to Mohammad Mehboudi.

34 records · Page 2Linked to original sources

arXiv2022

Bath-Induced Correlations Enhance Thermometry Precision at Low Temperatures

We study the role of bath-induced correlations in temperature estimation of cold bosonic baths. Our protocol includes multiple probes, that are not interacting, nor are they initially correlated to each other. They interact with a bosonic sample and reach a nonthermal steady state, which is measured to estimate the temperature of the sample. It is well known that in the steady state such noninteracting probes may get correlated to each other and even entangled. Nonetheless, the impact of these correlations in metrology has not been deeply investigated yet. Here, we examine their role for thermometry of cold bosonic gases and show that, although being classical, bath-induced correlations can lead to significant enhancement of precision for thermometry. The improvement is especially important at low temperatures, where attaining high precision thermometry is particularly demanding. The proposed thermometry scheme does not require any precise dynamical control of the probes and tuning the parameters and is robust to noise in initial preparation, as it is built upon the steady state generated by the natural dissipative dynamics of the system. Therefore, our results put forward new possibilities in thermometry at low temperatures, of relevance, for instance, in cold gases and Bose-Einstein condensates.

quant-ph↗

arXiv2021

Thermodynamic length and work optimisation for Gaussian quantum states

Constructing optimal thermodynamic processes in quantum systems relies on managing the balance between the average excess work and its stochastic fluctuations. Recently it has been shown that two different quantum generalisations of thermodynamic length can be utilised to determine protocols with either minimal excess work or minimal work variance. These lengths measure the distance between points on a manifold of control parameters, and optimal protocols are achieved by following the relevant geodesic paths given some fixed boundary conditions. Here we explore this problem in the context of Gaussian quantum states that are weakly coupled to an environment and derive general expressions for these two forms of thermodynamic length. We then use this to compute optimal thermodynamic protocols for various examples of externally driven Gaussian systems with multiple control parameters.

quant-ph↗

arXiv2020

Geometry of work fluctuations versus efficiency in microscopic thermal machines

When engineering microscopic machines, increasing efficiency can often come at a price of reduced reliability due to the impact of stochastic fluctuations. Here we develop a general method for performing multi-objective optimisation of efficiency and work fluctuations in thermal machines operating close to equilibrium in either the classical or quantum regime. Our method utilises techniques from thermodynamic geometry, whereby we match optimal solutions to protocols parameterised by their thermodynamic length. We characterise the optimal protocols for continuous-variable Gaussian machines, which form a crucial class in the study of thermodynamics for microscopic systems.

quant-ph↗

arXiv2020

Verification of joint measurability using phase-space quasiprobability distributions

Measurement incompatibility is a distinguishing property of quantum physics and an essential resource for many quantum information processing tasks. We introduce an approach to verify the joint measurability of measurements based on phase-space quasiprobability distributions. Our results therefore establish a connection between two notions of non-classicality, namely the negativity of quasiprobability distributions and measurement incompatibility. We show how our approach can be applied to the study of incompatibility-breaking channels and derive incompatibility-breaking sufficient conditions for bosonic systems and Gaussian channels. In particular, these conditions provide useful tools for investigating the effects of errors and imperfections on the incompatibility of measurements in practice. To illustrate our method, we consider all classes of single-mode Gaussian channels. We show that pure lossy channels with 50% or more losses break the incompatibility of all measurements that can be represented by non-negative Wigner functions, which includes the set of Gaussian measurements.

quant-ph↗

arXiv2019

Linear response theory for quantum Gaussian processes

Fluctuation dissipation theorems connect the linear response of a physical system to a perturbation to the steady-state correlation functions. Until now, most of these theorems have been derived for finite-dimensional systems. However, many relevant physical processes are described by systems of infinite dimension in the Gaussian regime. In this work, we find a linear response theory for quantum Gaussian systems subject to time dependent Gaussian channels. In particular, we establish a fluctuation dissipation theorem for the covariance matrix that connects its linear response at any time to the steady state two-time correlations. The theorem covers non-equilibrium scenarios as it does not require the steady state to be at thermal equilibrium. We further show how our results simplify the study of Gaussian systems subject to a time dependent Lindbladian master equation. Finally, we illustrate the usage of our new scheme through some examples. Due to broad generality of the Gaussian formalism, we expect our results to find an application in many physical platforms, such as opto-mechanical systems in the presence of external noise or driven quantum heat devices.

cond-mat.stat-mech↗

arXiv2019

Thermometry in the quantum regime: Recent theoretical progress

Controlling and measuring the temperature in different devices and platforms that operate in the quantum regime is, without any doubt, essential for any potential application. In this review, we report the most recent theoretical developments dealing with accurate estimation of very low temperatures in quantum systems. Together with the emerging experimental techniques and developments of measurement protocols, the theory of quantum thermometry will decisively impinge and shape the forthcoming quantum technologies. While current quantum thermometric methods differ greatly depending on the experimental platform, the achievable precision, and the temperature range of interest, the theory of quantum thermometry is built under a unifying framework at the crossroads of quantum metrology, open quantum systems, and quantum many-body physics. At a fundamental level, theoretical quantum thermometry is concerned with finding the ultimate bounds and scaling laws that limit the precision of temperature estimation for systems in and out-of-thermal equilibrium. At a more practical level, it provides tools to formulate precise, yet feasible, thermometric protocols for relevant experimental architectures. Last but not least, the theory of quantum thermometry examines genuine quantum features, like entanglement and coherence, for their exploitation in enhanced-resolution thermometry.

quant-ph↗

arXiv2019

Heat current control in trapped BEC

We investigate the heat transport and the control of heat current among two spatially separated trapped Bose-Einstein Condensates (BEC), each of them at a different temperature. To allow for heat transport among the two independent BECs we consider a link made of two harmonically trapped impurities, each of them interacting with one of the BECs. Since the impurities are spatially separated, we consider long-range interactions between them, namely a dipole-dipole coupling. We study this system under theoretically suitable and experimentally feasible assumptions/parameters. The dynamics of these impurities is treated within the framework of the quantum Brownian motion model, where the excitation modes of the BECs play the role of the heat bath. We address the dependence of heat current and current-current correlations on the physical parameters of the system. Interestingly, we show that heat rectification, i.e., the unidirectional flow of heat, can occur in our system, when a periodic driving on the trapping frequencies of the impurities is considered. Therefore, our system is a possible setup for the implementation of a phononic circuit. Motivated by recent developments on the usage of BECs as platforms for quantum information processing, our work offers an alternative possibility to use this versatile setting for information transfer and processing, within the context of phononics, and more generally in quantum thermodynamics.

cond-mat.quant-gas↗

arXiv2018

Dynamically induced heat rectification in quantum systems

Heat rectifiers are systems that conduct heat asymmetrically for forward and reversed temperature gradients. Here, we present an analytical study of heat rectification in linear quantum systems. We demonstrate that asymmetric heat currents can be induced in a linear system only if it is dynamically driven. The rectification can be further enhanced, even achieving maximal performance, by detuning the oscillators of the driven network. Finally, we demonstrate the feasibility of such driven harmonic network to work as a thermal transistor, quantifying its efficiency through the dynamical amplification factor.

quant-ph↗

arXiv2018

Using polarons for sub-nK quantum non-demolition thermometry in a Bose-Einstein condensate

We introduce a novel minimally-disturbing method for sub-nK thermometry in a Bose-Einstein condensate (BEC). Our technique is based on the Bose-polaron model; namely, an impurity embedded in the BEC acts as the thermometer. We propose to detect temperature fluctuations from measurements of the position and momentum of the impurity. Crucially, these cause minimal back-action on the BEC and hence, realize a non-demolition temperature measurement. Following the paradigm of the emerging field of \textit{quantum thermometry}, we combine tools from quantum parameter estimation and the theory of open quantum systems to solve the problem in full generality. We thus avoid \textit{any} simplification, such as demanding thermalization of the impurity atoms, or imposing weak dissipative interactions with the BEC. Our method is illustrated with realistic experimental parameters common in many labs, thus showing that it can compete with state-of-the-art \textit{destructive} techniques, even when the estimates are built from the outcomes of accessible (sub-optimal) quadrature measurements.

cond-mat.quant-gas↗

arXiv2018

Fluctuation-dissipation theorem for non-equilibrium quantum systems

The fluctuation-dissipation theorem (FDT) is a central result in statistical physics, both for classical and quantum systems. It establishes a relationship between the linear response of a system under a time-dependent perturbation and time correlations of certain observables in equilibrium. Here we derive a generalization of the theorem which can be applied to any Markov quantum system and makes use of the symmetric logarithmic derivative (SLD). There are several important benefits from our approach. First, such a formulation clarifies the relation between classical and quantum versions of the equilibrium FDT. Second, and more important, it facilitates the extension of the FDT to arbitrary quantum Markovian evolutions, as given by quantum maps. Third, it brings out the full connection between the FDT and the Quantum Fisher information, the figure of merit in quantum metrology.

quant-ph↗

arXiv2017

Low-temperature thermometry can be enhanced by strong coupling

We consider the problem of estimating the temperature $ T $ of a very cold equilibrium sample. The temperature estimates are drawn from measurements performed on a quantum probe strongly coupled to it. We model this scenario by resorting to the canonical Caldeira-Leggett Hamiltonian and find analytically the exact stationary state of the probe for arbitrary coupling strength. In general, the probe does not reach thermal equilibrium with the sample, due to their non-perturbative interaction. We argue that this is advantageous for low temperature thermometry, as we show in our model that: (i) The thermometric precision at low $ T $ can be significantly enhanced by strengthening the probe-sampling coupling, (ii) the variance of a suitable quadrature of our Brownian thermometer can yield temperature estimates with nearly minimal statistical uncertainty, and (iii) the spectral density of the probe-sample coupling may be engineered to further improve thermometric performance. These observations may find applications in practical nanoscale thermometry at low temperatures---a regime which is particularly relevant to quantum technologies.

quant-ph↗

arXiv2017

Global and local thermometry schemes in coupled quantum systems

We study the ultimate bounds on the estimation of temperature for an interacting quantum system. We consider two coupled bosonic modes that are assumed to be thermal and using quantum estimation theory establish the role the Hamiltonian parameters play in thermometry. We show that in the case of a conserved particle number the interaction between the modes leads to a decrease in the overall sensitivity to temperature, while interestingly, if particle exchange is allowed with the thermal bath the converse is true. We explain this dichotomy by examining the energy spectra. Finally, we devise experimentally implementable thermometry schemes that rely only on locally accessible information from the total system, showing that almost Heisenberg limited precision can still be achieved, and we address the (im)possibility for multiparameter estimation in the system.

quant-ph↗

arXiv2016

Achieving sub-shot-noise sensing at finite temperatures

We investigate sensing of magnetic fields using quantum spin chains at finite temperature and exploit quantum phase crossovers to improve metrological bounds on the estimation of the chain parameters. In particular, we analyze the $ XX $ spin chain and show that the magnetic sensitivity of this system is dictated by its adiabatic magnetic susceptibility, which scales extensively (linearly) in the number of spins $ N $. Next, we introduce an iterative feedforward protocol that actively exploits features of quantum phase crossovers to enable super-extensive scaling of the magnetic sensitivity. Moreover, we provide experimentally realistic observables to saturate the quantum metrological bounds. Finally, we also address magnetic sensing in the Heisenberg $ XY $ spin chain.

quant-ph↗

arXiv2016

Testing a Quantum Heat Pump with a Two-Level Spin

Once in its non-equilibrium steady state, a nanoscale system coupled to several heat baths may be thought-of as a quantum heat pump. Depending on the direction of its stationary heat flows it may function as e.g. a refrigerator or a heat transformer. These continuous heat devices can be arbitrarily complex multipartite systems, and yet their working principle is always the same: They are made up of several elementary three-level stages operating in parallel. As a result, it is possible to devise external black-box testing strategies to learn about their functionality and performance regardless of any internal details. In particular, one such heat pump can be tested by coupling a two-level spin to one of its contact transitions. The steady state of this external probe contains information about the presence of heat leaks and internal dissipation in the device, and also, about the direction of its steady-state heat currents. Provided that the irreversibility of the heat pump is low, one can further estimate its coefficient of performance. These techniques may find applications in the emerging field of quantum thermal engineering, as they facilitate the diagnosis and design optimization of complex thermodynamic cycles.

quant-ph↗

arXiv2015

Thermometry Precision in Strongly Correlated Ultracold Lattice Gases

The precise knowledge of the temperature of an ultracold lattice gas simulating a strongly correlated system is a question of both, fundamental and technological importance. Here, we address such question by combining tools from quantum metrology together with the study of the quantum correlations embedded in the system at finite temperatures. Within this frame we examine the spin-$1/2$ XY chain, first estimating, by means of the quantum Fisher information, the lowest attainable bound on the temperature precision. We then address the estimation of the temperature of the sample from the analysis of correlations using a quantum non demolishing Faraday spectroscopy method. Finally, we demonstrate that for sufficiently low temperatures the proposed measurements are optimal to estimate accurately the temperature of the sample.

quant-ph↗

arXiv2015

Individual quantum probes for optimal thermometry

The unknown temperature of a sample may be estimated with minimal disturbance by putting it in thermal contact with an individual quantum probe. If the interaction time is sufficiently long so that the probe thermalizes, the temperature can be read out directly from its steady state. Here we prove that the optimal quantum probe, acting as a thermometer with maximal thermal sensitivity, is an effective two-level atom with a maximally degenerate excited state. When the total interaction time is insufficient to produce full thermalization, we optimize the estimation protocol by breaking it down into sequential stages of probe preparation, thermal contact and measurement. We observe that frequently interrogated probes initialized in the ground state achieve the best performance. For both fully and partly thermalized thermometers, the sensitivity grows significantly with the number of levels, though optimization over their energy spectrum remains always crucial.

quant-ph↗